Github/rtl8192eu-linux-driver
1
0
Fork 0
mirror of https://github.com/Mange/rtl8192eu-linux-driver synced 2024-11-26 07:25:00 +00:00
Code Issues Packages Projects Releases Wiki Activity
9dde4572b4
rtl8192eu-linux-driver/hal/OUTSRC/odm_HWConfig.c
CGarces 9dde4572b4 Updated to v4.3.8_12406.20140929
2017-05-11 20:38:48 +02:00

2356 lines
60 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
//============================================================
// include files
//============================================================
#include "Mp_Precomp.h"
#include "odm_precomp.h"
#define READ_AND_CONFIG_MP(ic, txt) (ODM_ReadAndConfig_MP_##ic##txt(pDM_Odm))
#define READ_AND_CONFIG_TC(ic, txt) (ODM_ReadAndConfig_TC_##ic##txt(pDM_Odm))
#if (TESTCHIP_SUPPORT == 1)
#define READ_AND_CONFIG(ic, txt) do {\
if (pDM_Odm->bIsMPChip)\
READ_AND_CONFIG_MP(ic,txt);\
else\
READ_AND_CONFIG_TC(ic,txt);\
} while(0)
#else
#define READ_AND_CONFIG READ_AND_CONFIG_MP
#endif
#define READ_FIRMWARE_MP(ic, txt) (ODM_ReadFirmware_MP_##ic##txt(pDM_Odm, pFirmware, pSize))
#define READ_FIRMWARE_TC(ic, txt) (ODM_ReadFirmware_TC_##ic##txt(pDM_Odm, pFirmware, pSize))
#if (TESTCHIP_SUPPORT == 1)
#define READ_FIRMWARE(ic, txt) do {\
if (pDM_Odm->bIsMPChip)\
READ_FIRMWARE_MP(ic,txt);\
else\
READ_FIRMWARE_TC(ic,txt);\
} while(0)
#else
#define READ_FIRMWARE READ_FIRMWARE_MP
#endif
#define GET_VERSION_MP(ic, txt) (ODM_GetVersion_MP_##ic##txt())
#define GET_VERSION_TC(ic, txt) (ODM_GetVersion_TC_##ic##txt())
#define GET_VERSION(ic, txt) (pDM_Odm->bIsMPChip?GET_VERSION_MP(ic,txt):GET_VERSION_TC(ic,txt))
u1Byte
odm_QueryRxPwrPercentage(
IN s1Byte AntPower
)
{
if ((AntPower <= -100) || (AntPower >= 20))
{
return 0;
}
else if (AntPower >= 0)
{
return 100;
}
else
{
return (100+AntPower);
}
}
#if (DM_ODM_SUPPORT_TYPE != ODM_WIN)
//
// 2012/01/12 MH MOve some signal strength smooth method to MP HAL layer.
// IF other SW team do not support the feature, remove this section.??
//
s4Byte
odm_SignalScaleMapping_92CSeries_patch_RT_CID_819x_Lenovo(
IN OUT PDM_ODM_T pDM_Odm,
s4Byte CurrSig
)
{
s4Byte RetSig = 0;
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
//if(pDM_Odm->SupportInterface == ODM_ITRF_PCIE)
{
// Step 1. Scale mapping.
// 20100611 Joseph: Re-tunning RSSI presentation for Lenovo.
// 20100426 Joseph: Modify Signal strength mapping.
// This modification makes the RSSI indication similar to Intel solution.
// 20100414 Joseph: Tunning RSSI for Lenovo according to RTL8191SE.
if(CurrSig >= 54 && CurrSig <= 100)
{
RetSig = 100;
}
else if(CurrSig>=42 && CurrSig <= 53 )
{
RetSig = 95;
}
else if(CurrSig>=36 && CurrSig <= 41 )
{
RetSig = 74 + ((CurrSig - 36) *20)/6;
}
else if(CurrSig>=33 && CurrSig <= 35 )
{
RetSig = 65 + ((CurrSig - 33) *8)/2;
}
else if(CurrSig>=18 && CurrSig <= 32 )
{
RetSig = 62 + ((CurrSig - 18) *2)/15;
}
else if(CurrSig>=15 && CurrSig <= 17 )
{
RetSig = 33 + ((CurrSig - 15) *28)/2;
}
else if(CurrSig>=10 && CurrSig <= 14 )
{
RetSig = 39;
}
else if(CurrSig>=8 && CurrSig <= 9 )
{
RetSig = 33;
}
else if(CurrSig <= 8 )
{
RetSig = 19;
}
}
#endif //ENDIF (DM_ODM_SUPPORT_TYPE == ODM_WIN)
return RetSig;
}
s4Byte
odm_SignalScaleMapping_92CSeries_patch_RT_CID_819x_Netcore(
IN OUT PDM_ODM_T pDM_Odm,
s4Byte CurrSig
)
{
s4Byte RetSig = 0;
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
//if(pDM_Odm->SupportInterface == ODM_ITRF_USB)
{
// Netcore request this modification because 2009.04.13 SU driver use it.
if(CurrSig >= 31 && CurrSig <= 100)
{
RetSig = 100;
}
else if(CurrSig >= 21 && CurrSig <= 30)
{
RetSig = 90 + ((CurrSig - 20) / 1);
}
else if(CurrSig >= 11 && CurrSig <= 20)
{
RetSig = 80 + ((CurrSig - 10) / 1);
}
else if(CurrSig >= 7 && CurrSig <= 10)
{
RetSig = 69 + (CurrSig - 7);
}
else if(CurrSig == 6)
{
RetSig = 54;
}
else if(CurrSig == 5)
{
RetSig = 45;
}
else if(CurrSig == 4)
{
RetSig = 36;
}
else if(CurrSig == 3)
{
RetSig = 27;
}
else if(CurrSig == 2)
{
RetSig = 18;
}
else if(CurrSig == 1)
{
RetSig = 9;
}
else
{
RetSig = CurrSig;
}
}
#endif //ENDIF (DM_ODM_SUPPORT_TYPE == ODM_WIN)
return RetSig;
}
s4Byte
odm_SignalScaleMapping_92CSeries(
IN OUT PDM_ODM_T pDM_Odm,
IN s4Byte CurrSig
)
{
s4Byte RetSig = 0;
#if (DEV_BUS_TYPE == RT_PCI_INTERFACE)
if(pDM_Odm->SupportInterface == ODM_ITRF_PCIE)
{
// Step 1. Scale mapping.
if(CurrSig >= 61 && CurrSig <= 100)
{
RetSig = 90 + ((CurrSig - 60) / 4);
}
else if(CurrSig >= 41 && CurrSig <= 60)
{
RetSig = 78 + ((CurrSig - 40) / 2);
}
else if(CurrSig >= 31 && CurrSig <= 40)
{
RetSig = 66 + (CurrSig - 30);
}
else if(CurrSig >= 21 && CurrSig <= 30)
{
RetSig = 54 + (CurrSig - 20);
}
else if(CurrSig >= 5 && CurrSig <= 20)
{
RetSig = 42 + (((CurrSig - 5) * 2) / 3);
}
else if(CurrSig == 4)
{
RetSig = 36;
}
else if(CurrSig == 3)
{
RetSig = 27;
}
else if(CurrSig == 2)
{
RetSig = 18;
}
else if(CurrSig == 1)
{
RetSig = 9;
}
else
{
RetSig = CurrSig;
}
}
#endif
#if ((DEV_BUS_TYPE == RT_USB_INTERFACE) ||(DEV_BUS_TYPE == RT_SDIO_INTERFACE))
if((pDM_Odm->SupportInterface == ODM_ITRF_USB) || (pDM_Odm->SupportInterface == ODM_ITRF_SDIO))
{
if(CurrSig >= 51 && CurrSig <= 100)
{
RetSig = 100;
}
else if(CurrSig >= 41 && CurrSig <= 50)
{
RetSig = 80 + ((CurrSig - 40)*2);
}
else if(CurrSig >= 31 && CurrSig <= 40)
{
RetSig = 66 + (CurrSig - 30);
}
else if(CurrSig >= 21 && CurrSig <= 30)
{
RetSig = 54 + (CurrSig - 20);
}
else if(CurrSig >= 10 && CurrSig <= 20)
{
RetSig = 42 + (((CurrSig - 10) * 2) / 3);
}
else if(CurrSig >= 5 && CurrSig <= 9)
{
RetSig = 22 + (((CurrSig - 5) * 3) / 2);
}
else if(CurrSig >= 1 && CurrSig <= 4)
{
RetSig = 6 + (((CurrSig - 1) * 3) / 2);
}
else
{
RetSig = CurrSig;
}
}
#endif
return RetSig;
}
s4Byte
odm_SignalScaleMapping(
IN OUT PDM_ODM_T pDM_Odm,
IN s4Byte CurrSig
)
{
if( (pDM_Odm->SupportPlatform == ODM_WIN) &&
(pDM_Odm->SupportInterface != ODM_ITRF_PCIE) && //USB & SDIO
(pDM_Odm->PatchID==10))//pMgntInfo->CustomerID == RT_CID_819x_Netcore
{
return odm_SignalScaleMapping_92CSeries_patch_RT_CID_819x_Netcore(pDM_Odm,CurrSig);
}
else if( (pDM_Odm->SupportPlatform == ODM_WIN) &&
(pDM_Odm->SupportInterface == ODM_ITRF_PCIE) &&
(pDM_Odm->PatchID==19))//pMgntInfo->CustomerID == RT_CID_819x_Lenovo)
{
return odm_SignalScaleMapping_92CSeries_patch_RT_CID_819x_Lenovo(pDM_Odm, CurrSig);
}
else{
return odm_SignalScaleMapping_92CSeries(pDM_Odm,CurrSig);
}
}
#endif
static u1Byte odm_SQ_process_patch_RT_CID_819x_Lenovo(
IN PDM_ODM_T pDM_Odm,
IN u1Byte isCCKrate,
IN u1Byte PWDB_ALL,
IN u1Byte path,
IN u1Byte RSSI
)
{
u1Byte SQ = 0;
#if (DM_ODM_SUPPORT_TYPE & ODM_WIN)
if(isCCKrate){
if(IS_HARDWARE_TYPE_8723AE(pDM_Odm->Adapter))
{
//
// <Roger_Notes> Expected signal strength and bars indication at Lenovo lab. 2013.04.11
// 802.11n, 802.11b, 802.11g only at channel 6
//
// Attenuation (dB) OS Signal Bars RSSI by Xirrus (dBm)
// 50 5 -52
// 55 5 -54
// 60 5 -55
// 65 5 -59
// 70 5 -63
// 75 5 -66
// 80 4 -72
// 85 3 -75
// 90 3 -80
// 95 2 -85
// 100 1 -89
// 102 1 -90
// 104 1 -91
//
RT_TRACE(COMP_DBG, DBG_WARNING, ("odm_SQ_process_patch_RT_CID_819x_Lenovo\n"));
#if OS_WIN_FROM_WIN8(OS_VERSION)
if(PWDB_ALL >= 50)
SQ = 100;
else if(PWDB_ALL >= 23 && PWDB_ALL < 50)
SQ = 80;
else if(PWDB_ALL >= 18 && PWDB_ALL < 23)
SQ = 60;
else if(PWDB_ALL >= 8 && PWDB_ALL < 18)
SQ = 40;
else
SQ = 10;
#else
if(PWDB_ALL >= 34)
SQ = 100;
else if(PWDB_ALL >= 23 && PWDB_ALL < 34)
SQ = 80;
else if(PWDB_ALL >= 18 && PWDB_ALL < 23)
SQ = 60;
else if(PWDB_ALL >= 8 && PWDB_ALL < 18)
SQ = 40;
else
SQ = 10;
if(PWDB_ALL == 0)// Abnormal case, do not indicate the value above 20 on Win7
SQ = 20;
#endif
}
else if(IS_HARDWARE_TYPE_8192E(pDM_Odm->Adapter)){
//
// <Roger_Notes> Expected signal strength and bars indication at Lenovo lab. 2013.04.11
// 802.11n, 802.11b, 802.11g only at channel 6
//
// Attenuation (dB) OS Signal Bars RSSI by Xirrus (dBm)
// 50 5 -49
// 55 5 -49
// 60 5 -50
// 65 5 -51
// 70 5 -52
// 75 5 -54
// 80 5 -55
// 85 4 -60
// 90 3 -63
// 95 3 -65
// 100 2 -67
// 102 2 -67
// 104 1 -70
//
if(PWDB_ALL >= 50)
SQ = 100;
else if(PWDB_ALL >= 35 && PWDB_ALL < 50)
SQ = 80;
else if(PWDB_ALL >= 31 && PWDB_ALL < 35)
SQ = 60;
else if(PWDB_ALL >= 22 && PWDB_ALL < 31)
SQ = 40;
else if(PWDB_ALL >= 18 && PWDB_ALL < 22)
SQ = 20;
else
SQ = 10;
}
else
{
if(PWDB_ALL >= 50)
SQ = 100;
else if(PWDB_ALL >= 35 && PWDB_ALL < 50)
SQ = 80;
else if(PWDB_ALL >= 22 && PWDB_ALL < 35)
SQ = 60;
else if(PWDB_ALL >= 18 && PWDB_ALL < 22)
SQ = 40;
else
SQ = 10;
}
}
else
{//OFDM rate
if(IS_HARDWARE_TYPE_8723AE(pDM_Odm->Adapter) ||
IS_HARDWARE_TYPE_8192E(pDM_Odm->Adapter))
{
if(RSSI >= 45)
SQ = 100;
else if(RSSI >= 22 && RSSI < 45)
SQ = 80;
else if(RSSI >= 18 && RSSI < 22)
SQ = 40;
else
SQ = 20;
}
else
{
if(RSSI >= 45)
SQ = 100;
else if(RSSI >= 22 && RSSI < 45)
SQ = 80;
else if(RSSI >= 18 && RSSI < 22)
SQ = 40;
else
SQ = 20;
}
}
RT_TRACE(COMP_DBG, DBG_TRACE, ("isCCKrate(%#d), PWDB_ALL(%#d), RSSI(%#d), SQ(%#d)\n", isCCKrate, PWDB_ALL, RSSI, SQ));
#endif
return SQ;
}
static u1Byte odm_SQ_process_patch_RT_CID_819x_Acer(
IN PDM_ODM_T pDM_Odm,
IN u1Byte isCCKrate,
IN u1Byte PWDB_ALL,
IN u1Byte path,
IN u1Byte RSSI
)
{
u1Byte SQ = 0;
#if (DM_ODM_SUPPORT_TYPE & ODM_WIN)
if(isCCKrate){
RT_TRACE(COMP_DBG, DBG_WARNING, ("odm_SQ_process_patch_RT_Acer\n"));
#if OS_WIN_FROM_WIN8(OS_VERSION)
if(PWDB_ALL >= 50)
SQ = 100;
else if(PWDB_ALL >= 35 && PWDB_ALL < 50)
SQ = 80;
else if(PWDB_ALL >= 30 && PWDB_ALL < 35)
SQ = 60;
else if(PWDB_ALL >= 25 && PWDB_ALL < 30)
SQ = 40;
else if(PWDB_ALL >= 20 && PWDB_ALL < 25)
SQ = 20;
else
SQ = 10;
#else
if(PWDB_ALL >= 50)
SQ = 100;
else if(PWDB_ALL >= 35 && PWDB_ALL < 50)
SQ = 80;
else if(PWDB_ALL >= 30 && PWDB_ALL < 35)
SQ = 60;
else if(PWDB_ALL >= 25 && PWDB_ALL < 30)
SQ = 40;
else if(PWDB_ALL >= 20 && PWDB_ALL < 25)
SQ = 20;
else
SQ = 10;
if(PWDB_ALL == 0)// Abnormal case, do not indicate the value above 20 on Win7
SQ = 20;
#endif
}
else
{//OFDM rate
if(IS_HARDWARE_TYPE_8723AE(pDM_Odm->Adapter) ||
IS_HARDWARE_TYPE_8192E(pDM_Odm->Adapter))
{
if(RSSI >= 45)
SQ = 100;
else if(RSSI >= 22 && RSSI < 45)
SQ = 80;
else if(RSSI >= 18 && RSSI < 22)
SQ = 40;
else
SQ = 20;
}
else
{
if(RSSI >= 35)
SQ = 100;
else if(RSSI >= 30 && RSSI < 35)
SQ = 80;
else if(RSSI >= 25 && RSSI < 30)
SQ = 40;
else
SQ = 20;
}
}
RT_TRACE(COMP_DBG, DBG_LOUD, ("isCCKrate(%#d), PWDB_ALL(%#d), RSSI(%#d), SQ(%#d)\n", isCCKrate, PWDB_ALL, RSSI, SQ));
#endif
return SQ;
}
static u1Byte
odm_EVMdbToPercentage(
IN s1Byte Value
)
{
//
// -33dB~0dB to 0%~99%
//
s1Byte ret_val;
ret_val = Value;
ret_val /= 2;
//DbgPrint("Value=%d\n", Value);
//ODM_RT_DISP(FRX, RX_PHY_SQ, ("EVMdbToPercentage92C Value=%d / %x \n", ret_val, ret_val));
if(ret_val >= 0)
ret_val = 0;
if(ret_val <= -33)
ret_val = -33;
ret_val = 0 - ret_val;
ret_val*=3;
if(ret_val == 99)
ret_val = 100;
return(ret_val);
}
static u1Byte
odm_EVMdbm_JaguarSeries(
IN s1Byte Value
)
{
s1Byte ret_val = Value;
// -33dB~0dB to 33dB ~ 0dB
if(ret_val == -128)
ret_val = 127;
else if (ret_val < 0)
ret_val = 0 - ret_val;
ret_val = ret_val >> 1;
return ret_val;
}
static u2Byte
odm_Cfo(
IN s1Byte Value
)
{
s2Byte ret_val;
if (Value < 0)
{
ret_val = 0 - Value;
ret_val = (ret_val << 1) + (ret_val >> 1) ; // *2.5~=312.5/2^7
ret_val = ret_val | BIT12; // set bit12 as 1 for negative cfo
}
else
{
ret_val = Value;
ret_val = (ret_val << 1) + (ret_val>>1) ; // *2.5~=312.5/2^7
}
return ret_val;
}
VOID
odm_RxPhyStatus92CSeries_Parsing(
IN OUT PDM_ODM_T pDM_Odm,
OUT PODM_PHY_INFO_T pPhyInfo,
IN pu1Byte pPhyStatus,
IN PODM_PACKET_INFO_T pPktinfo
)
{
SWAT_T *pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;
u1Byte i, Max_spatial_stream;
s1Byte rx_pwr[4], rx_pwr_all=0;
u1Byte EVM, PWDB_ALL = 0, PWDB_ALL_BT;
u1Byte RSSI, total_rssi=0;
BOOLEAN isCCKrate=FALSE;
u1Byte rf_rx_num = 0;
u1Byte cck_highpwr = 0;
u1Byte LNA_idx, VGA_idx;
PPHY_STATUS_RPT_8192CD_T pPhyStaRpt = (PPHY_STATUS_RPT_8192CD_T)pPhyStatus;
isCCKrate = (pPktinfo->DataRate <= DESC_RATE11M)?TRUE :FALSE;
pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_A] = -1;
pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_B] = -1;
if(isCCKrate)
{
u1Byte report;
u1Byte cck_agc_rpt;
pDM_Odm->PhyDbgInfo.NumQryPhyStatusCCK++;
//
// (1)Hardware does not provide RSSI for CCK
// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
//
//if(pHalData->eRFPowerState == eRfOn)
cck_highpwr = pDM_Odm->bCckHighPower;
//else
// cck_highpwr = FALSE;
cck_agc_rpt = pPhyStaRpt->cck_agc_rpt_ofdm_cfosho_a ;
//2011.11.28 LukeLee: 88E use different LNA & VGA gain table
//The RSSI formula should be modified according to the gain table
//In 88E, cck_highpwr is always set to 1
if(pDM_Odm->SupportICType & (ODM_RTL8188E|ODM_RTL8192E|ODM_RTL8723B))
{
LNA_idx = ((cck_agc_rpt & 0xE0) >>5);
VGA_idx = (cck_agc_rpt & 0x1F);
if(pDM_Odm->SupportICType & (ODM_RTL8188E|ODM_RTL8192E))
{
switch(LNA_idx)
{
case 7:
if(VGA_idx <= 27)
rx_pwr_all = -100 + 2*(27-VGA_idx); //VGA_idx = 27~2
else
rx_pwr_all = -100;
break;
case 6:
rx_pwr_all = -48 + 2*(2-VGA_idx); //VGA_idx = 2~0
break;
case 5:
rx_pwr_all = -42 + 2*(7-VGA_idx); //VGA_idx = 7~5
break;
case 4:
rx_pwr_all = -36 + 2*(7-VGA_idx); //VGA_idx = 7~4
break;
case 3:
//rx_pwr_all = -28 + 2*(7-VGA_idx); //VGA_idx = 7~0
rx_pwr_all = -24 + 2*(7-VGA_idx); //VGA_idx = 7~0
break;
case 2:
if(cck_highpwr)
rx_pwr_all = -12 + 2*(5-VGA_idx); //VGA_idx = 5~0
else
rx_pwr_all = -6+ 2*(5-VGA_idx);
break;
case 1:
rx_pwr_all = 8-2*VGA_idx;
break;
case 0:
rx_pwr_all = 14-2*VGA_idx;
break;
default:
//DbgPrint("CCK Exception default\n");
break;
}
rx_pwr_all += 6;
//2012.10.08 LukeLee: Modify for 92E CCK RSSI
if(pDM_Odm->SupportICType == ODM_RTL8192E)
rx_pwr_all += 10;
PWDB_ALL = odm_QueryRxPwrPercentage(rx_pwr_all);
if(cck_highpwr == FALSE)
{
if(PWDB_ALL >= 80)
PWDB_ALL = ((PWDB_ALL-80)<<1)+((PWDB_ALL-80)>>1)+80;
else if((PWDB_ALL <= 78) && (PWDB_ALL >= 20))
PWDB_ALL += 3;
if(PWDB_ALL>100)
PWDB_ALL = 100;
}
}
else if(pDM_Odm->SupportICType & (ODM_RTL8723B))
{
#if (RTL8723B_SUPPORT == 1)
rx_pwr_all = odm_CCKRSSI_8723B(LNA_idx,VGA_idx);
PWDB_ALL = odm_QueryRxPwrPercentage(rx_pwr_all);
if(PWDB_ALL>100)
PWDB_ALL = 100;
#endif
}
}
else
{
if(!cck_highpwr)
{
report =( cck_agc_rpt & 0xc0 )>>6;
switch(report)
{
// 03312009 modified by cosa
// Modify the RF RNA gain value to -40, -20, -2, 14 by Jenyu's suggestion
// Note: different RF with the different RNA gain.
case 0x3:
rx_pwr_all = -46 - (cck_agc_rpt & 0x3e);
break;
case 0x2:
rx_pwr_all = -26 - (cck_agc_rpt & 0x3e);
break;
case 0x1:
rx_pwr_all = -12 - (cck_agc_rpt & 0x3e);
break;
case 0x0:
rx_pwr_all = 16 - (cck_agc_rpt & 0x3e);
break;
}
}
else
{
//report = pDrvInfo->cfosho[0] & 0x60;
//report = pPhyStaRpt->cck_agc_rpt_ofdm_cfosho_a& 0x60;
report = (cck_agc_rpt & 0x60)>>5;
switch(report)
{
case 0x3:
rx_pwr_all = -46 - ((cck_agc_rpt & 0x1f)<<1) ;
break;
case 0x2:
rx_pwr_all = -26 - ((cck_agc_rpt & 0x1f)<<1);
break;
case 0x1:
rx_pwr_all = -12 - ((cck_agc_rpt & 0x1f)<<1) ;
break;
case 0x0:
rx_pwr_all = 16 - ((cck_agc_rpt & 0x1f)<<1) ;
break;
}
}
PWDB_ALL = odm_QueryRxPwrPercentage(rx_pwr_all);
//Modification for ext-LNA board
if(pDM_Odm->BoardType & (ODM_BOARD_EXT_LNA | ODM_BOARD_EXT_PA))
{
if((cck_agc_rpt>>7) == 0){
PWDB_ALL = (PWDB_ALL>94)?100:(PWDB_ALL +6);
}
else
{
if(PWDB_ALL > 38)
PWDB_ALL -= 16;
else
PWDB_ALL = (PWDB_ALL<=16)?(PWDB_ALL>>2):(PWDB_ALL -12);
}
//CCK modification
if(PWDB_ALL > 25 && PWDB_ALL <= 60)
PWDB_ALL += 6;
//else if (PWDB_ALL <= 25)
// PWDB_ALL += 8;
}
else//Modification for int-LNA board
{
if(PWDB_ALL > 99)
PWDB_ALL -= 8;
else if(PWDB_ALL > 50 && PWDB_ALL <= 68)
PWDB_ALL += 4;
}
}
pPhyInfo->RxPWDBAll = PWDB_ALL;
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
pPhyInfo->BTRxRSSIPercentage = PWDB_ALL;
pPhyInfo->RecvSignalPower = rx_pwr_all;
#endif
//
// (3) Get Signal Quality (EVM)
//
//if(pPktinfo->bPacketMatchBSSID)
{
u1Byte SQ,SQ_rpt;
if((pDM_Odm->SupportPlatform == ODM_WIN) &&
(pDM_Odm->PatchID==RT_CID_819x_Lenovo)){
SQ = odm_SQ_process_patch_RT_CID_819x_Lenovo(pDM_Odm,isCCKrate,PWDB_ALL,0,0);
}
else if((pDM_Odm->SupportPlatform == ODM_WIN) &&
(pDM_Odm->PatchID==RT_CID_819x_Acer))
{
SQ = odm_SQ_process_patch_RT_CID_819x_Acer(pDM_Odm,isCCKrate,PWDB_ALL,0,0);
}
else if(pPhyInfo->RxPWDBAll > 40 && !pDM_Odm->bInHctTest){
SQ = 100;
}
else{
SQ_rpt = pPhyStaRpt->cck_sig_qual_ofdm_pwdb_all;
if(SQ_rpt > 64)
SQ = 0;
else if (SQ_rpt < 20)
SQ = 100;
else
SQ = ((64-SQ_rpt) * 100) / 44;
}
//DbgPrint("cck SQ = %d\n", SQ);
pPhyInfo->SignalQuality = SQ;
pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_A] = SQ;
pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_B] = -1;
}
}
else //is OFDM rate
{
pDM_Odm->PhyDbgInfo.NumQryPhyStatusOFDM++;
//
// (1)Get RSSI for HT rate
//
for(i = ODM_RF_PATH_A; i < ODM_RF_PATH_MAX; i++)
{
// 2008/01/30 MH we will judge RF RX path now.
if (pDM_Odm->RFPathRxEnable & BIT(i))
rf_rx_num++;
//else
//continue;
rx_pwr[i] = ((pPhyStaRpt->path_agc[i].gain& 0x3F)*2) - 110;
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
pPhyInfo->RxPwr[i] = rx_pwr[i];
#endif
/* Translate DBM to percentage. */
RSSI = odm_QueryRxPwrPercentage(rx_pwr[i]);
total_rssi += RSSI;
//RT_DISP(FRX, RX_PHY_SS, ("RF-%d RXPWR=%x RSSI=%d\n", i, rx_pwr[i], RSSI));
//Modification for ext-LNA board
if(pDM_Odm->SupportICType&ODM_RTL8192C)
{
if(pDM_Odm->BoardType & (ODM_BOARD_EXT_LNA | ODM_BOARD_EXT_PA))
{
if((pPhyStaRpt->path_agc[i].trsw) == 1)
RSSI = (RSSI>94)?100:(RSSI +6);
else
RSSI = (RSSI<=16)?(RSSI>>3):(RSSI -16);
if((RSSI <= 34) && (RSSI >=4))
RSSI -= 4;
}
}
pPhyInfo->RxMIMOSignalStrength[i] =(u1Byte) RSSI;
#if (DM_ODM_SUPPORT_TYPE & (/*ODM_WIN|*/ODM_CE|ODM_AP|ODM_ADSL))
//Get Rx snr value in DB
pPhyInfo->RxSNR[i] = pDM_Odm->PhyDbgInfo.RxSNRdB[i] = (s4Byte)(pPhyStaRpt->path_rxsnr[i]/2);
#endif
/* Record Signal Strength for next packet */
//if(pPktinfo->bPacketMatchBSSID)
{
if((pDM_Odm->SupportPlatform == ODM_WIN) &&
(pDM_Odm->PatchID==RT_CID_819x_Lenovo))
{
if(i==ODM_RF_PATH_A)
pPhyInfo->SignalQuality = odm_SQ_process_patch_RT_CID_819x_Lenovo(pDM_Odm,isCCKrate,PWDB_ALL,i,RSSI);
}
else if((pDM_Odm->SupportPlatform == ODM_WIN) &&
(pDM_Odm->PatchID==RT_CID_819x_Acer))
{
pPhyInfo->SignalQuality = odm_SQ_process_patch_RT_CID_819x_Acer(pDM_Odm,isCCKrate,PWDB_ALL,0,RSSI);
}
}
}
//
// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
//
rx_pwr_all = (((pPhyStaRpt->cck_sig_qual_ofdm_pwdb_all) >> 1 )& 0x7f) -110;
PWDB_ALL_BT = PWDB_ALL = odm_QueryRxPwrPercentage(rx_pwr_all);
//RT_DISP(FRX, RX_PHY_SS, ("PWDB_ALL=%d\n",PWDB_ALL));
pPhyInfo->RxPWDBAll = PWDB_ALL;
//ODM_RT_TRACE(pDM_Odm,ODM_COMP_RSSI_MONITOR, ODM_DBG_LOUD, ("ODM OFDM RSSI=%d\n",pPhyInfo->RxPWDBAll));
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
pPhyInfo->BTRxRSSIPercentage = PWDB_ALL_BT;
pPhyInfo->RxPower = rx_pwr_all;
pPhyInfo->RecvSignalPower = rx_pwr_all;
#endif
if((pDM_Odm->SupportPlatform == ODM_WIN) &&(pDM_Odm->PatchID==19)){
//do nothing
}else if((pDM_Odm->SupportPlatform == ODM_WIN) &&(pDM_Odm->PatchID==25)){
//do nothing
}
else{//pMgntInfo->CustomerID != RT_CID_819x_Lenovo
//
// (3)EVM of HT rate
//
if(pPktinfo->DataRate >=DESC_RATEMCS8 && pPktinfo->DataRate <=DESC_RATEMCS15)
Max_spatial_stream = 2; //both spatial stream make sense
else
Max_spatial_stream = 1; //only spatial stream 1 makes sense
for(i=0; i<Max_spatial_stream; i++)
{
// Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
// fill most significant bit to "zero" when doing shifting operation which may change a negative
// value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore.
EVM = odm_EVMdbToPercentage( (pPhyStaRpt->stream_rxevm[i] )); //dbm
//RT_DISP(FRX, RX_PHY_SQ, ("RXRATE=%x RXEVM=%x EVM=%s%d\n",
//GET_RX_STATUS_DESC_RX_MCS(pDesc), pDrvInfo->rxevm[i], "%", EVM));
//if(pPktinfo->bPacketMatchBSSID)
{
if(i==ODM_RF_PATH_A) // Fill value in RFD, Get the first spatial stream only
{
pPhyInfo->SignalQuality = (u1Byte)(EVM & 0xff);
}
pPhyInfo->RxMIMOSignalQuality[i] = (u1Byte)(EVM & 0xff);
}
}
}
ODM_ParsingCFO(pDM_Odm, pPktinfo, pPhyStaRpt->path_cfotail);
}
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
//UI BSS List signal strength(in percentage), make it good looking, from 0~100.
//It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp().
if(isCCKrate)
{
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
// 2012/01/12 MH Use customeris signal strength from HalComRxdDesc.c/
pPhyInfo->SignalStrength = (u1Byte)(SignalScaleMapping(pDM_Odm->Adapter, PWDB_ALL));//PWDB_ALL;
#else
#ifdef CONFIG_SKIP_SIGNAL_SCALE_MAPPING
pPhyInfo->SignalStrength = (u1Byte)PWDB_ALL;
#else
pPhyInfo->SignalStrength = (u1Byte)(odm_SignalScaleMapping(pDM_Odm, PWDB_ALL));//PWDB_ALL;
#endif
#endif
}
else
{
if (rf_rx_num != 0)
{
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
// 2012/01/12 MH Use customeris signal strength from HalComRxdDesc.c/
pPhyInfo->SignalStrength = (u1Byte)(SignalScaleMapping(pDM_Odm->Adapter, total_rssi/=rf_rx_num));//PWDB_ALL;
#else
#ifdef CONFIG_SKIP_SIGNAL_SCALE_MAPPING
total_rssi/=rf_rx_num;
pPhyInfo->SignalStrength = (u1Byte)total_rssi;
#else
pPhyInfo->SignalStrength = (u1Byte)(odm_SignalScaleMapping(pDM_Odm, total_rssi/=rf_rx_num));
#endif
#endif
}
}
#endif
//DbgPrint("isCCKrate = %d, pPhyInfo->RxPWDBAll = %d, pPhyStaRpt->cck_agc_rpt_ofdm_cfosho_a = 0x%x\n",
//isCCKrate, pPhyInfo->RxPWDBAll, pPhyStaRpt->cck_agc_rpt_ofdm_cfosho_a);
//For 92C/92D HW (Hybrid) Antenna Diversity
#if(defined(CONFIG_HW_ANTENNA_DIVERSITY))
pDM_SWAT_Table->antsel = pPhyStaRpt->ant_sel;
//For 88E HW Antenna Diversity
pDM_Odm->DM_FatTable.antsel_rx_keep_0 = pPhyStaRpt->ant_sel;
pDM_Odm->DM_FatTable.antsel_rx_keep_1 = pPhyStaRpt->ant_sel_b;
pDM_Odm->DM_FatTable.antsel_rx_keep_2 = pPhyStaRpt->antsel_rx_keep_2;
#endif
}
#if ODM_IC_11AC_SERIES_SUPPORT
VOID
odm_RxPhyStatusJaguarSeries_Parsing(
IN OUT PDM_ODM_T pDM_Odm,
OUT PODM_PHY_INFO_T pPhyInfo,
IN pu1Byte pPhyStatus,
IN PODM_PACKET_INFO_T pPktinfo
)
{
u1Byte i, Max_spatial_stream;
s1Byte rx_pwr[4], rx_pwr_all=0;
u1Byte EVM = 0, EVMdbm, PWDB_ALL = 0, PWDB_ALL_BT;
u1Byte RSSI, total_rssi=0;
u1Byte isCCKrate=0;
u1Byte rf_rx_num = 0;
u1Byte cck_highpwr = 0;
u1Byte LNA_idx, VGA_idx;
PPHY_STATUS_RPT_8812_T pPhyStaRpt = (PPHY_STATUS_RPT_8812_T)pPhyStatus;
if(pPktinfo->DataRate <= DESC_RATE54M)
{
switch(pPhyStaRpt->r_RFMOD){
case 1:
if(pPhyStaRpt->sub_chnl == 0)
pPhyInfo->BandWidth = 1;
else
pPhyInfo->BandWidth = 0;
break;
case 2:
if(pPhyStaRpt->sub_chnl == 0)
pPhyInfo->BandWidth = 2;
else if(pPhyStaRpt->sub_chnl == 9 || pPhyStaRpt->sub_chnl == 10)
pPhyInfo->BandWidth = 1;
else
pPhyInfo->BandWidth = 0;
break;
default: case 0:
pPhyInfo->BandWidth = 0;
break;
}
}
if(pPktinfo->DataRate <= DESC_RATE11M)
isCCKrate = TRUE;
else
isCCKrate = FALSE;
pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_A] = -1;
pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_B] = -1;
if(isCCKrate)
{
u1Byte cck_agc_rpt;
pDM_Odm->PhyDbgInfo.NumQryPhyStatusCCK++;
//
// (1)Hardware does not provide RSSI for CCK
// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
//
//if(pHalData->eRFPowerState == eRfOn)
cck_highpwr = pDM_Odm->bCckHighPower;
//else
// cck_highpwr = FALSE;
cck_agc_rpt = pPhyStaRpt->cfosho[0] ;
LNA_idx = ((cck_agc_rpt & 0xE0) >>5);
VGA_idx = (cck_agc_rpt & 0x1F);
if(pDM_Odm->SupportICType == ODM_RTL8812)
{
switch(LNA_idx)
{
case 7:
if(VGA_idx <= 27)
rx_pwr_all = -100 + 2*(27-VGA_idx); //VGA_idx = 27~2
else
rx_pwr_all = -100;
break;
case 6:
rx_pwr_all = -48 + 2*(2-VGA_idx); //VGA_idx = 2~0
break;
case 5:
rx_pwr_all = -42 + 2*(7-VGA_idx); //VGA_idx = 7~5
break;
case 4:
rx_pwr_all = -36 + 2*(7-VGA_idx); //VGA_idx = 7~4
break;
case 3:
//rx_pwr_all = -28 + 2*(7-VGA_idx); //VGA_idx = 7~0
rx_pwr_all = -24 + 2*(7-VGA_idx); //VGA_idx = 7~0
break;
case 2:
if(cck_highpwr)
rx_pwr_all = -12 + 2*(5-VGA_idx); //VGA_idx = 5~0
else
rx_pwr_all = -6+ 2*(5-VGA_idx);
break;
case 1:
rx_pwr_all = 8-2*VGA_idx;
break;
case 0:
rx_pwr_all = 14-2*VGA_idx;
break;
default:
//DbgPrint("CCK Exception default\n");
break;
}
rx_pwr_all += 6;
PWDB_ALL = odm_QueryRxPwrPercentage(rx_pwr_all);
if(cck_highpwr == FALSE)
{
if(PWDB_ALL >= 80)
PWDB_ALL = ((PWDB_ALL-80)<<1)+((PWDB_ALL-80)>>1)+80;
else if((PWDB_ALL <= 78) && (PWDB_ALL >= 20))
PWDB_ALL += 3;
if(PWDB_ALL>100)
PWDB_ALL = 100;
}
}
else if(pDM_Odm->SupportICType == ODM_RTL8821)
{
s1Byte Pout = -6;
switch(LNA_idx)
{
case 5:
rx_pwr_all = Pout -32 -(2*VGA_idx);
break;
case 4:
rx_pwr_all = Pout -24 -(2*VGA_idx);
break;
case 2:
rx_pwr_all = Pout -11 -(2*VGA_idx);
break;
case 1:
rx_pwr_all = Pout + 5 -(2*VGA_idx);
break;
case 0:
rx_pwr_all = Pout + 21 -(2*VGA_idx);
break;
}
PWDB_ALL = odm_QueryRxPwrPercentage(rx_pwr_all);
}
pPhyInfo->RxPWDBAll = PWDB_ALL;
//if(pPktinfo->StationID == 0)
//{
// DbgPrint("CCK: LNA_idx = %d, VGA_idx = %d, pPhyInfo->RxPWDBAll = %d\n",
// LNA_idx, VGA_idx, pPhyInfo->RxPWDBAll);
//}
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
pPhyInfo->BTRxRSSIPercentage = PWDB_ALL;
pPhyInfo->RecvSignalPower = rx_pwr_all;
#endif
//
// (3) Get Signal Quality (EVM)
//
//if(pPktinfo->bPacketMatchBSSID)
{
u1Byte SQ,SQ_rpt;
if((pDM_Odm->SupportPlatform == ODM_WIN) &&
(pDM_Odm->PatchID==RT_CID_819x_Lenovo))
{
SQ = odm_SQ_process_patch_RT_CID_819x_Lenovo(pDM_Odm,isCCKrate,PWDB_ALL,0,0);
}
else if(pPhyInfo->RxPWDBAll > 40 && !pDM_Odm->bInHctTest)
{
SQ = 100;
}
else
{
SQ_rpt = pPhyStaRpt->pwdb_all;
if(SQ_rpt > 64)
SQ = 0;
else if (SQ_rpt < 20)
SQ = 100;
else
SQ = ((64-SQ_rpt) * 100) / 44;
}
//DbgPrint("cck SQ = %d\n", SQ);
pPhyInfo->SignalQuality = SQ;
pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_A] = SQ;
pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_B] = -1;
}
}
else //is OFDM rate
{
pDM_Odm->PhyDbgInfo.NumQryPhyStatusOFDM++;
//
// (1)Get RSSI for OFDM rate
//
for(i = ODM_RF_PATH_A; i < ODM_RF_PATH_MAX; i++)
{
// 2008/01/30 MH we will judge RF RX path now.
//DbgPrint("pDM_Odm->RFPathRxEnable = %x\n", pDM_Odm->RFPathRxEnable);
if (pDM_Odm->RFPathRxEnable & BIT(i))
{
rf_rx_num++;
}
//else
//continue;
//2012.05.25 LukeLee: Testchip AGC report is wrong, it should be restored back to old formula in MP chip
//if((pDM_Odm->SupportICType & (ODM_RTL8812|ODM_RTL8821)) && (!pDM_Odm->bIsMPChip))
rx_pwr[i] = (pPhyStaRpt->gain_trsw[i]&0x7F) - 110;
//else
// rx_pwr[i] = ((pPhyStaRpt->gain_trsw[i]& 0x3F)*2) - 110; //OLD FORMULA
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
pPhyInfo->RxPwr[i] = rx_pwr[i];
#endif
/* Translate DBM to percentage. */
RSSI = odm_QueryRxPwrPercentage(rx_pwr[i]);
total_rssi += RSSI;
//RT_DISP(FRX, RX_PHY_SS, ("RF-%d RXPWR=%x RSSI=%d\n", i, rx_pwr[i], RSSI));
pPhyInfo->RxMIMOSignalStrength[i] =(u1Byte) RSSI;
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE|ODM_AP|ODM_ADSL))
//Get Rx snr value in DB
pPhyInfo->RxSNR[i] = pDM_Odm->PhyDbgInfo.RxSNRdB[i] = pPhyStaRpt->rxsnr[i]/2;
#endif
//
// (2) CFO_short & CFO_tail
//
pPhyInfo->Cfo_short[i] = odm_Cfo( (pPhyStaRpt->cfosho[i]) );
pPhyInfo->Cfo_tail[i] = odm_Cfo( (pPhyStaRpt->cfotail[i]) );
/* Record Signal Strength for next packet */
//if(pPktinfo->bPacketMatchBSSID)
{
if((pDM_Odm->SupportPlatform == ODM_WIN) &&
(pDM_Odm->PatchID==RT_CID_819x_Lenovo))
{
if(i==ODM_RF_PATH_A)
pPhyInfo->SignalQuality = odm_SQ_process_patch_RT_CID_819x_Lenovo(pDM_Odm,isCCKrate,PWDB_ALL,i,RSSI);
}
}
}
//
// (3)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
//
//2012.05.25 LukeLee: Testchip AGC report is wrong, it should be restored back to old formula in MP chip
if((pDM_Odm->SupportICType & (ODM_RTL8812|ODM_RTL8821)) && (!pDM_Odm->bIsMPChip))
rx_pwr_all = (pPhyStaRpt->pwdb_all& 0x7f) -110;
else
rx_pwr_all = (((pPhyStaRpt->pwdb_all) >> 1 )& 0x7f) -110; //OLD FORMULA
PWDB_ALL_BT = PWDB_ALL = odm_QueryRxPwrPercentage(rx_pwr_all);
pPhyInfo->RxPWDBAll = PWDB_ALL;
//ODM_RT_TRACE(pDM_Odm,ODM_COMP_RSSI_MONITOR, ODM_DBG_LOUD, ("ODM OFDM RSSI=%d\n",pPhyInfo->RxPWDBAll));
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
pPhyInfo->BTRxRSSIPercentage = PWDB_ALL_BT;
pPhyInfo->RxPower = rx_pwr_all;
pPhyInfo->RecvSignalPower = rx_pwr_all;
#endif
//DbgPrint("OFDM: pPhyInfo->RxPWDBAll = %d, pPhyInfo->RxMIMOSignalStrength[0] = %d, pPhyInfo->RxMIMOSignalStrength[1] = %d\n",
// pPhyInfo->RxPWDBAll, pPhyInfo->RxMIMOSignalStrength[0], pPhyInfo->RxMIMOSignalStrength[1]);
if((pDM_Odm->SupportPlatform == ODM_WIN) &&(pDM_Odm->PatchID==19))
{
//do nothing
}
else
{ //pMgntInfo->CustomerID != RT_CID_819x_Lenovo
//
// (4)EVM of OFDM rate
//
if( (pPktinfo->DataRate>=DESC_RATEMCS8) &&
(pPktinfo->DataRate <=DESC_RATEMCS15))
Max_spatial_stream = 2;
else if( (pPktinfo->DataRate>=DESC_RATEVHTSS2MCS0) &&
(pPktinfo->DataRate <=DESC_RATEVHTSS2MCS9))
Max_spatial_stream = 2;
else
Max_spatial_stream = 1;
//if(pPktinfo->bPacketMatchBSSID)
{
//DbgPrint("pPktinfo->DataRate = %d\n", pPktinfo->DataRate);
for(i=0; i<Max_spatial_stream; i++)
{
// Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
// fill most significant bit to "zero" when doing shifting operation which may change a negative
// value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore.
//
// 2013/09/02 MH According to 8812AU test, when use RX evm the value sometimes
// will be incorrect and 1SS-MCS-0-7 always incorrect. Only use LSIG the evm value
// seems ok. This seems BB bug, we need use another way to display better SQ.
//
//if (pPktinfo->DataRate>=DESC8812_RATE6M && pPktinfo->DataRate<=DESC8812_RATE54M)
{
if(i==ODM_RF_PATH_A )
{
EVM = odm_EVMdbToPercentage( (pPhyStaRpt->sigevm )); //dbm
EVM += 20;
if (EVM > 100)
EVM = 100;
}
}
#if 0
else
{
if (pPhyStaRpt->rxevm[i] == -128)
{
pPhyStaRpt->rxevm[i] = -25;
}
EVM = odm_EVMdbToPercentage( (pPhyStaRpt->rxevm[i] )); //dbm
}
#endif
EVMdbm = odm_EVMdbm_JaguarSeries(pPhyStaRpt->rxevm[i]);
//RT_DISP(FRX, RX_PHY_SQ, ("RXRATE=%x RXEVM=%x EVM=%s%d\n",
//pPktinfo->DataRate, pPhyStaRpt->rxevm[i], "%", EVM));
{
if(i==ODM_RF_PATH_A) // Fill value in RFD, Get the first spatial stream only
{
pPhyInfo->SignalQuality = EVM;
}
pPhyInfo->RxMIMOSignalQuality[i] = EVM;
pPhyInfo->RxMIMOEVMdbm[i] = EVMdbm;
}
}
}
}
ODM_ParsingCFO(pDM_Odm, pPktinfo, pPhyStaRpt->cfotail);
}
//DbgPrint("isCCKrate= %d, pPhyInfo->SignalStrength=%d % PWDB_AL=%d rf_rx_num=%d\n", isCCKrate, pPhyInfo->SignalStrength, PWDB_ALL, rf_rx_num);
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
//UI BSS List signal strength(in percentage), make it good looking, from 0~100.
//It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp().
if(isCCKrate)
{
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
// 2012/01/12 MH Use customeris signal strength from HalComRxdDesc.c/
pPhyInfo->SignalStrength = (u1Byte)(SignalScaleMapping(pDM_Odm->Adapter, PWDB_ALL));//PWDB_ALL;
#else
pPhyInfo->SignalStrength = (u1Byte)(odm_SignalScaleMapping(pDM_Odm, PWDB_ALL));//PWDB_ALL;
#endif
}
else
{
if (rf_rx_num != 0)
{
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
// 2012/01/12 MH Use customeris signal strength from HalComRxdDesc.c/
pPhyInfo->SignalStrength = (u1Byte)(SignalScaleMapping(pDM_Odm->Adapter, total_rssi/=rf_rx_num));//PWDB_ALL;
#else
pPhyInfo->SignalStrength = (u1Byte)(odm_SignalScaleMapping(pDM_Odm, total_rssi/=rf_rx_num));
#endif
}
}
#endif
pDM_Odm->RxPWDBAve = pDM_Odm->RxPWDBAve + pPhyInfo->RxPWDBAll;
pDM_Odm->DM_FatTable.antsel_rx_keep_0 = pPhyStaRpt->antidx_anta;
pDM_Odm->DM_FatTable.antsel_rx_keep_1 = pPhyStaRpt->antidx_antb;
//DbgPrint("pPhyStaRpt->antidx_anta = %d, pPhyStaRpt->antidx_antb = %d, pPhyStaRpt->resvd_1 = %d",
// pPhyStaRpt->antidx_anta, pPhyStaRpt->antidx_antb, pPhyStaRpt->resvd_1);
//DbgPrint("----------------------------\n");
//DbgPrint("pPktinfo->StationID=%d, pPktinfo->DataRate=0x%x\n",pPktinfo->StationID, pPktinfo->DataRate);
//DbgPrint("pPhyStaRpt->gain_trsw[0]=0x%x, pPhyStaRpt->gain_trsw[1]=0x%x, pPhyStaRpt->pwdb_all=0x%x\n",
// pPhyStaRpt->gain_trsw[0],pPhyStaRpt->gain_trsw[1], pPhyStaRpt->pwdb_all);
//DbgPrint("pPhyInfo->RxMIMOSignalStrength[0]=%d, pPhyInfo->RxMIMOSignalStrength[1]=%d, RxPWDBAll=%d\n",
// pPhyInfo->RxMIMOSignalStrength[0], pPhyInfo->RxMIMOSignalStrength[1], pPhyInfo->RxPWDBAll);
}
#endif
VOID
odm_Init_RSSIForDM(
IN OUT PDM_ODM_T pDM_Odm
)
{
}
VOID
odm_Process_RSSIForDM(
IN OUT PDM_ODM_T pDM_Odm,
IN PODM_PHY_INFO_T pPhyInfo,
IN PODM_PACKET_INFO_T pPktinfo
)
{
s4Byte UndecoratedSmoothedPWDB, UndecoratedSmoothedCCK, UndecoratedSmoothedOFDM, RSSI_Ave;
u1Byte i, isCCKrate=0;
u1Byte RSSI_max, RSSI_min;
u4Byte OFDM_pkt=0;
u4Byte Weighting=0;
PSTA_INFO_T pEntry;
if(pPktinfo->StationID == 0xFF)
return;
#if (RTL8723B_SUPPORT == 1)||(RTL8821A_SUPPORT == 1)
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
odm_S0S1_SwAntDivByCtrlFrame_ProcessRSSI(pDM_Odm, pPhyInfo, pPktinfo);
#endif
#endif
//
// 2012/05/30 MH/Luke.Lee Add some description
// In windows driver: AP/IBSS mode STA
//
//if (pDM_Odm->SupportPlatform == ODM_WIN)
//{
// pEntry = pDM_Odm->pODM_StaInfo[pDM_Odm->pAidMap[pPktinfo->StationID-1]];
//}
//else
pEntry = pDM_Odm->pODM_StaInfo[pPktinfo->StationID];
if(!IS_STA_VALID(pEntry) )
{
return;
}
if((!pPktinfo->bPacketMatchBSSID) )
{
return;
}
if(pPktinfo->bPacketBeacon)
pDM_Odm->PhyDbgInfo.NumQryBeaconPkt++;
isCCKrate = (pPktinfo->DataRate <= DESC_RATE11M)?TRUE :FALSE;
pDM_Odm->RxRate = pPktinfo->DataRate;
/*
if(!isCCKrate)
{
DbgPrint("OFDM: pPktinfo->StationID=%d, isCCKrate=%d, pPhyInfo->RxPWDBAll=%d\n",
pPktinfo->StationID, isCCKrate, pPhyInfo->RxPWDBAll);
}
*/
//--------------Statistic for antenna/path diversity------------------
if(pDM_Odm->SupportAbility & ODM_BB_ANT_DIV)
{
#if(defined(CONFIG_HW_ANTENNA_DIVERSITY))
ODM_Process_RSSIForAntDiv(pDM_Odm,pPhyInfo,pPktinfo);
#endif
}
else if(pDM_Odm->SupportAbility & ODM_BB_PATH_DIV)
{
#if (RTL8812A_SUPPORT == 1)
if(pDM_Odm->SupportICType == ODM_RTL8812)
{
pPATHDIV_T pDM_PathDiv = &pDM_Odm->DM_PathDiv;
if(pPktinfo->bPacketToSelf || pPktinfo->bPacketMatchBSSID)
{
if(pPktinfo->DataRate > DESC_RATE11M)
ODM_PathStatistics_8812A(pDM_Odm, pPktinfo->StationID, pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_A],
pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_B]);
}
}
#endif
}
//-----------------Smart Antenna Debug Message------------------//
UndecoratedSmoothedCCK = pEntry->rssi_stat.UndecoratedSmoothedCCK;
UndecoratedSmoothedOFDM = pEntry->rssi_stat.UndecoratedSmoothedOFDM;
UndecoratedSmoothedPWDB = pEntry->rssi_stat.UndecoratedSmoothedPWDB;
if(pPktinfo->bPacketToSelf || pPktinfo->bPacketBeacon)
{
if(!isCCKrate)//ofdm rate
{
if(pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_B] == 0)
{
RSSI_Ave = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_A];
pDM_Odm->RSSI_A = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_A];
pDM_Odm->RSSI_B = 0;
}
else
{
//DbgPrint("pRfd->Status.RxMIMOSignalStrength[0] = %d, pRfd->Status.RxMIMOSignalStrength[1] = %d \n",
//pRfd->Status.RxMIMOSignalStrength[0], pRfd->Status.RxMIMOSignalStrength[1]);
pDM_Odm->RSSI_A = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_A];
pDM_Odm->RSSI_B = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_B];
if(pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_A] > pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_B])
{
RSSI_max = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_A];
RSSI_min = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_B];
}
else
{
RSSI_max = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_B];
RSSI_min = pPhyInfo->RxMIMOSignalStrength[ODM_RF_PATH_A];
}
if((RSSI_max -RSSI_min) < 3)
RSSI_Ave = RSSI_max;
else if((RSSI_max -RSSI_min) < 6)
RSSI_Ave = RSSI_max - 1;
else if((RSSI_max -RSSI_min) < 10)
RSSI_Ave = RSSI_max - 2;
else
RSSI_Ave = RSSI_max - 3;
}
//1 Process OFDM RSSI
if(UndecoratedSmoothedOFDM <= 0) // initialize
{
UndecoratedSmoothedOFDM = pPhyInfo->RxPWDBAll;
}
else
{
if(pPhyInfo->RxPWDBAll > (u4Byte)UndecoratedSmoothedOFDM)
{
UndecoratedSmoothedOFDM =
( ((UndecoratedSmoothedOFDM)*(Rx_Smooth_Factor-1)) +
(RSSI_Ave)) /(Rx_Smooth_Factor);
UndecoratedSmoothedOFDM = UndecoratedSmoothedOFDM + 1;
}
else
{
UndecoratedSmoothedOFDM =
( ((UndecoratedSmoothedOFDM)*(Rx_Smooth_Factor-1)) +
(RSSI_Ave)) /(Rx_Smooth_Factor);
}
}
pEntry->rssi_stat.PacketMap = (pEntry->rssi_stat.PacketMap<<1) | BIT0;
}
else
{
RSSI_Ave = pPhyInfo->RxPWDBAll;
pDM_Odm->RSSI_A = (u1Byte) pPhyInfo->RxPWDBAll;
pDM_Odm->RSSI_B = 0;
//1 Process CCK RSSI
if(UndecoratedSmoothedCCK <= 0) // initialize
{
UndecoratedSmoothedCCK = pPhyInfo->RxPWDBAll;
}
else
{
if(pPhyInfo->RxPWDBAll > (u4Byte)UndecoratedSmoothedCCK)
{
UndecoratedSmoothedCCK =
( ((UndecoratedSmoothedCCK)*(Rx_Smooth_Factor-1)) +
(pPhyInfo->RxPWDBAll)) /(Rx_Smooth_Factor);
UndecoratedSmoothedCCK = UndecoratedSmoothedCCK + 1;
}
else
{
UndecoratedSmoothedCCK =
( ((UndecoratedSmoothedCCK)*(Rx_Smooth_Factor-1)) +
(pPhyInfo->RxPWDBAll)) /(Rx_Smooth_Factor);
}
}
pEntry->rssi_stat.PacketMap = pEntry->rssi_stat.PacketMap<<1;
}
//if(pEntry)
{
//2011.07.28 LukeLee: modified to prevent unstable CCK RSSI
if(pEntry->rssi_stat.ValidBit >= 64)
pEntry->rssi_stat.ValidBit = 64;
else
pEntry->rssi_stat.ValidBit++;
for(i=0; i<pEntry->rssi_stat.ValidBit; i++)
OFDM_pkt += (u1Byte)(pEntry->rssi_stat.PacketMap>>i)&BIT0;
if(pEntry->rssi_stat.ValidBit == 64)
{
Weighting = ((OFDM_pkt<<4) > 64)?64:(OFDM_pkt<<4);
UndecoratedSmoothedPWDB = (Weighting*UndecoratedSmoothedOFDM+(64-Weighting)*UndecoratedSmoothedCCK)>>6;
}
else
{
if(pEntry->rssi_stat.ValidBit != 0)
UndecoratedSmoothedPWDB = (OFDM_pkt*UndecoratedSmoothedOFDM+(pEntry->rssi_stat.ValidBit-OFDM_pkt)*UndecoratedSmoothedCCK)/pEntry->rssi_stat.ValidBit;
else
UndecoratedSmoothedPWDB = 0;
}
pEntry->rssi_stat.UndecoratedSmoothedCCK = UndecoratedSmoothedCCK;
pEntry->rssi_stat.UndecoratedSmoothedOFDM = UndecoratedSmoothedOFDM;
pEntry->rssi_stat.UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB;
//DbgPrint("OFDM_pkt=%d, Weighting=%d\n", OFDM_pkt, Weighting);
//DbgPrint("UndecoratedSmoothedOFDM=%d, UndecoratedSmoothedPWDB=%d, UndecoratedSmoothedCCK=%d\n",
// UndecoratedSmoothedOFDM, UndecoratedSmoothedPWDB, UndecoratedSmoothedCCK);
}
}
}
//
// Endianness before calling this API
//
VOID
ODM_PhyStatusQuery_92CSeries(
IN OUT PDM_ODM_T pDM_Odm,
OUT PODM_PHY_INFO_T pPhyInfo,
IN pu1Byte pPhyStatus,
IN PODM_PACKET_INFO_T pPktinfo
)
{
odm_RxPhyStatus92CSeries_Parsing(
pDM_Odm,
pPhyInfo,
pPhyStatus,
pPktinfo);
if( pDM_Odm->RSSI_test == TRUE)
{
// Select the packets to do RSSI checking for antenna switching.
if(pPktinfo->bPacketToSelf || pPktinfo->bPacketBeacon )
{
/*
#if 0//(DM_ODM_SUPPORT_TYPE == ODM_WIN)
dm_SWAW_RSSI_Check(
Adapter,
(tmppAdapter!=NULL)?(tmppAdapter==Adapter):TRUE,
bPacketMatchBSSID,
pEntry,
pRfd);
#elif (DM_ODM_SUPPORT_TYPE == ODM_CE)
// Select the packets to do RSSI checking for antenna switching.
//odm_SwAntDivRSSICheck8192C(padapter, precvframe->u.hdr.attrib.RxPWDBAll);
#endif
*/
#if (RTL8192C_SUPPORT == 1)
ODM_SwAntDivChkPerPktRssi(pDM_Odm,pPktinfo->StationID,pPhyInfo);
#endif
}
}
else
{
odm_Process_RSSIForDM(pDM_Odm,pPhyInfo,pPktinfo);
}
}
//
// Endianness before calling this API
//
VOID
ODM_PhyStatusQuery_JaguarSeries(
IN OUT PDM_ODM_T pDM_Odm,
OUT PODM_PHY_INFO_T pPhyInfo,
IN pu1Byte pPhyStatus,
IN PODM_PACKET_INFO_T pPktinfo
)
{
odm_RxPhyStatusJaguarSeries_Parsing(
pDM_Odm,
pPhyInfo,
pPhyStatus,
pPktinfo);
odm_Process_RSSIForDM(pDM_Odm,pPhyInfo,pPktinfo);
}
VOID
ODM_PhyStatusQuery(
IN OUT PDM_ODM_T pDM_Odm,
OUT PODM_PHY_INFO_T pPhyInfo,
IN pu1Byte pPhyStatus,
IN PODM_PACKET_INFO_T pPktinfo
)
{
if(pDM_Odm->SupportICType & ODM_IC_11AC_SERIES )
{
ODM_PhyStatusQuery_JaguarSeries(pDM_Odm,pPhyInfo,pPhyStatus,pPktinfo);
}
else
{
ODM_PhyStatusQuery_92CSeries(pDM_Odm,pPhyInfo,pPhyStatus,pPktinfo);
}
}
// For future use.
VOID
ODM_MacStatusQuery(
IN OUT PDM_ODM_T pDM_Odm,
IN pu1Byte pMacStatus,
IN u1Byte MacID,
IN BOOLEAN bPacketMatchBSSID,
IN BOOLEAN bPacketToSelf,
IN BOOLEAN bPacketBeacon
)
{
// 2011/10/19 Driver team will handle in the future.
}
//
// If you want to add a new IC, Please follow below template and generate a new one.
//
//
HAL_STATUS
ODM_ConfigRFWithHeaderFile(
IN PDM_ODM_T pDM_Odm,
IN ODM_RF_Config_Type ConfigType,
IN ODM_RF_RADIO_PATH_E eRFPath
)
{
PADAPTER Adapter = pDM_Odm->Adapter;
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_LOUD,
("===>ODM_ConfigRFWithHeaderFile (%s)\n", (pDM_Odm->bIsMPChip) ? "MPChip" : "TestChip"));
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_LOUD,
("pDM_Odm->SupportPlatform: 0x%X, pDM_Odm->SupportInterface: 0x%X, pDM_Odm->BoardType: 0x%X\n",
pDM_Odm->SupportPlatform, pDM_Odm->SupportInterface, pDM_Odm->BoardType));
#if (RTL8723A_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8723A)
{
if(ConfigType == CONFIG_RF_RADIO) {
if(eRFPath == ODM_RF_PATH_A)
READ_AND_CONFIG_MP(8723A,_RadioA);
}
}
#endif
#if (RTL8188E_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8188E)
{
if(ConfigType == CONFIG_RF_RADIO) {
if(eRFPath == ODM_RF_PATH_A)
READ_AND_CONFIG_MP(8188E,_RadioA);
}
else if(ConfigType == CONFIG_RF_TXPWR_LMT) {
READ_AND_CONFIG_MP(8188E,_TXPWR_LMT);
}
}
#endif
#if (RTL8812A_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8812)
{
if(ConfigType == CONFIG_RF_RADIO) {
if(eRFPath == ODM_RF_PATH_A)
{
READ_AND_CONFIG_MP(8812A,_RadioA);
}
else if(eRFPath == ODM_RF_PATH_B)
{
READ_AND_CONFIG_MP(8812A,_RadioB);
}
}
else if(ConfigType == CONFIG_RF_TXPWR_LMT) {
READ_AND_CONFIG_MP(8812A,_TXPWR_LMT);
}
}
#endif
#if (RTL8821A_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8821)
{
if(ConfigType == CONFIG_RF_RADIO) {
if(eRFPath == ODM_RF_PATH_A)
{
READ_AND_CONFIG_MP(8821A,_RadioA);
}
}
else if(ConfigType == CONFIG_RF_TXPWR_LMT) {
if (pDM_Odm->SupportInterface == ODM_ITRF_USB) {
if (pDM_Odm->ExtPA5G || pDM_Odm->ExtLNA5G)
READ_AND_CONFIG_MP(8821A,_TXPWR_LMT_8811AU_FEM);
else
READ_AND_CONFIG_MP(8821A,_TXPWR_LMT_8811AU_IPA);
} else {
READ_AND_CONFIG_MP(8821A,_TXPWR_LMT_8821A);
}
}
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_LOUD, ("<===8821_ODM_ConfigRFWithHeaderFile\n"));
}
#endif
#if (RTL8723B_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8723B)
{
if(ConfigType == CONFIG_RF_RADIO) {
READ_AND_CONFIG_MP(8723B,_RadioA);
}
else if(ConfigType == CONFIG_RF_TXPWR_LMT) {
READ_AND_CONFIG_MP(8723B,_TXPWR_LMT);
}
}
#endif
#if (RTL8192E_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8192E)
{
if(ConfigType == CONFIG_RF_RADIO) {
if(eRFPath == ODM_RF_PATH_A)
READ_AND_CONFIG_MP(8192E,_RadioA);
else if(eRFPath == ODM_RF_PATH_B)
READ_AND_CONFIG_MP(8192E,_RadioB);
}
else if(ConfigType == CONFIG_RF_TXPWR_LMT) {
READ_AND_CONFIG_MP(8192E,_TXPWR_LMT);
}
}
#endif
#if (RTL8814A_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8814A)
{
/*
if(ConfigType == CONFIG_RF_TXPWR_LMT) {
READ_AND_CONFIG(8813A,_TXPWR_LMT);
}
*/
}
#endif
return HAL_STATUS_SUCCESS;
}
HAL_STATUS
ODM_ConfigRFWithTxPwrTrackHeaderFile(
IN PDM_ODM_T pDM_Odm
)
{
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_LOUD,
("===>ODM_ConfigRFWithTxPwrTrackHeaderFile (%s)\n", (pDM_Odm->bIsMPChip) ? "MPChip" : "TestChip"));
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_LOUD,
("pDM_Odm->SupportPlatform: 0x%X, pDM_Odm->SupportInterface: 0x%X, pDM_Odm->BoardType: 0x%X\n",
pDM_Odm->SupportPlatform, pDM_Odm->SupportInterface, pDM_Odm->BoardType));
if(0)
{
}
#if (RTL8821A_SUPPORT == 1)
else if(pDM_Odm->SupportICType == ODM_RTL8821)
{
if (pDM_Odm->SupportInterface == ODM_ITRF_PCIE)
READ_AND_CONFIG_MP(8821A,_TxPowerTrack_PCIE);
else if (pDM_Odm->SupportInterface == ODM_ITRF_USB)
READ_AND_CONFIG_MP(8821A,_TxPowerTrack_USB);
else
READ_AND_CONFIG_MP(8821A,_TxPowerTrack_PCIE);
}
#endif
#if (RTL8812A_SUPPORT == 1)
else if(pDM_Odm->SupportICType == ODM_RTL8812)
{
if (pDM_Odm->SupportInterface == ODM_ITRF_PCIE)
READ_AND_CONFIG_MP(8812A,_TxPowerTrack_PCIE);
else if (pDM_Odm->SupportInterface == ODM_ITRF_USB) {
if (pDM_Odm->RFEType == 3 && pDM_Odm->bIsMPChip)
READ_AND_CONFIG_MP(8812A,_TxPowerTrack_RFE3);
else
READ_AND_CONFIG_MP(8812A,_TxPowerTrack_USB);
}
}
#endif
#if (RTL8192E_SUPPORT == 1)
else if(pDM_Odm->SupportICType == ODM_RTL8192E)
{
if (pDM_Odm->SupportInterface == ODM_ITRF_PCIE)
READ_AND_CONFIG_MP(8192E,_TxPowerTrack_PCIE);
else if (pDM_Odm->SupportInterface == ODM_ITRF_USB)
READ_AND_CONFIG_MP(8192E,_TxPowerTrack_USB);
}
#endif
#if RTL8723B_SUPPORT
else if(pDM_Odm->SupportICType == ODM_RTL8723B)
{
if (pDM_Odm->SupportInterface == ODM_ITRF_PCIE)
READ_AND_CONFIG_MP(8723B,_TxPowerTrack_PCIE);
else if (pDM_Odm->SupportInterface == ODM_ITRF_USB)
READ_AND_CONFIG_MP(8723B,_TxPowerTrack_USB);
else if (pDM_Odm->SupportInterface == ODM_ITRF_SDIO)
READ_AND_CONFIG_MP(8723B,_TxPowerTrack_SDIO);
}
#endif
#if RTL8188E_SUPPORT
else if(pDM_Odm->SupportICType == ODM_RTL8188E)
{
if (pDM_Odm->SupportInterface == ODM_ITRF_PCIE)
READ_AND_CONFIG_MP(8188E,_TxPowerTrack_PCIE);
else if (pDM_Odm->SupportInterface == ODM_ITRF_USB)
READ_AND_CONFIG_MP(8188E,_TxPowerTrack_USB);
else
READ_AND_CONFIG_MP(8188E,_TxPowerTrack_PCIE);
}
#endif
return HAL_STATUS_SUCCESS;
}
HAL_STATUS
ODM_ConfigBBWithHeaderFile(
IN PDM_ODM_T pDM_Odm,
IN ODM_BB_Config_Type ConfigType
)
{
#if (DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_WIN))
PADAPTER Adapter = pDM_Odm->Adapter;
#if (DM_ODM_SUPPORT_TYPE & ODM_WIN)
PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
#endif
#endif
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_LOUD,
("===>ODM_ConfigBBWithHeaderFile (%s)\n", (pDM_Odm->bIsMPChip) ? "MPChip" : "TestChip"));
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_LOUD,
("pDM_Odm->SupportPlatform: 0x%X, pDM_Odm->SupportInterface: 0x%X, pDM_Odm->BoardType: 0x%X\n",
pDM_Odm->SupportPlatform, pDM_Odm->SupportInterface, pDM_Odm->BoardType));
#if (RTL8723A_SUPPORT == 1)
if(pDM_Odm->SupportICType == ODM_RTL8723A)
{
if(ConfigType == CONFIG_BB_PHY_REG)
{
READ_AND_CONFIG_MP(8723A,_PHY_REG);
}
else if(ConfigType == CONFIG_BB_AGC_TAB)
{
READ_AND_CONFIG_MP(8723A,_AGC_TAB);
}
}
#endif
#if (RTL8188E_SUPPORT == 1)
if(pDM_Odm->SupportICType == ODM_RTL8188E)
{
if(ConfigType == CONFIG_BB_PHY_REG)
{
READ_AND_CONFIG_MP(8188E,_PHY_REG);
}
else if(ConfigType == CONFIG_BB_AGC_TAB)
{
READ_AND_CONFIG_MP(8188E,_AGC_TAB);
}
else if(ConfigType == CONFIG_BB_PHY_REG_PG)
{
READ_AND_CONFIG_MP(8188E,_PHY_REG_PG);
}
}
#endif
#if (RTL8812A_SUPPORT == 1)
if(pDM_Odm->SupportICType == ODM_RTL8812)
{
if(ConfigType == CONFIG_BB_PHY_REG)
{
READ_AND_CONFIG_MP(8812A,_PHY_REG);
}
else if(ConfigType == CONFIG_BB_AGC_TAB)
{
READ_AND_CONFIG_MP(8812A,_AGC_TAB);
}
else if(ConfigType == CONFIG_BB_PHY_REG_PG)
{
if (pDM_Odm->RFEType == 3 && pDM_Odm->bIsMPChip)
READ_AND_CONFIG_MP(8812A,_PHY_REG_PG_ASUS);
#if (DM_ODM_SUPPORT_TYPE & ODM_WIN)
else if (pMgntInfo->CustomerID == RT_CID_WNC_NEC && pDM_Odm->bIsMPChip)
READ_AND_CONFIG_MP(8812A,_PHY_REG_PG_NEC);
#endif
else
READ_AND_CONFIG_MP(8812A,_PHY_REG_PG);
}
else if(ConfigType == CONFIG_BB_PHY_REG_MP)
{
READ_AND_CONFIG_MP(8812A,_PHY_REG_MP);
}
else if(ConfigType == CONFIG_BB_AGC_TAB_DIFF)
{
if ((36 <= *pDM_Odm->pChannel) && (*pDM_Odm->pChannel <= 64))
AGC_DIFF_CONFIG_MP(8812A,LB);
else if (100 <= *pDM_Odm->pChannel)
AGC_DIFF_CONFIG_MP(8812A,HB);
}
}
#endif
#if (RTL8821A_SUPPORT == 1)
if(pDM_Odm->SupportICType == ODM_RTL8821)
{
if(ConfigType == CONFIG_BB_PHY_REG)
{
READ_AND_CONFIG_MP(8821A,_PHY_REG);
}
else if(ConfigType == CONFIG_BB_AGC_TAB)
{
READ_AND_CONFIG_MP(8821A,_AGC_TAB);
}
else if(ConfigType == CONFIG_BB_PHY_REG_PG)
{
READ_AND_CONFIG_MP(8821A,_PHY_REG_PG);
}
}
#endif
#if (RTL8723B_SUPPORT == 1)
if(pDM_Odm->SupportICType == ODM_RTL8723B)
{
if(ConfigType == CONFIG_BB_PHY_REG)
{
READ_AND_CONFIG_MP(8723B,_PHY_REG);
}
else if(ConfigType == CONFIG_BB_AGC_TAB)
{
READ_AND_CONFIG_MP(8723B,_AGC_TAB);
}
else if(ConfigType == CONFIG_BB_PHY_REG_PG)
{
READ_AND_CONFIG_MP(8723B,_PHY_REG_PG);
}
}
#endif
#if (RTL8192E_SUPPORT == 1)
if(pDM_Odm->SupportICType == ODM_RTL8192E)
{
if(ConfigType == CONFIG_BB_PHY_REG)
{
READ_AND_CONFIG_MP(8192E,_PHY_REG);
}
else if(ConfigType == CONFIG_BB_AGC_TAB)
{
READ_AND_CONFIG_MP(8192E,_AGC_TAB);
}
else if(ConfigType == CONFIG_BB_PHY_REG_PG)
{
READ_AND_CONFIG_MP(8192E,_PHY_REG_PG);
}
}
#endif
#if (RTL8814A_SUPPORT == 1)
if(pDM_Odm->SupportICType == ODM_RTL8814A)
{
if(ConfigType == CONFIG_BB_PHY_REG)
{
READ_AND_CONFIG(8813A,_PHY_REG);
}
else if(ConfigType == CONFIG_BB_AGC_TAB)
{
READ_AND_CONFIG(8813A,_AGC_TAB);
}
else if(ConfigType == CONFIG_BB_PHY_REG_PG)
{
//READ_AND_CONFIG(8813A,_PHY_REG_PG);
}
}
#endif
return HAL_STATUS_SUCCESS;
}
HAL_STATUS
ODM_ConfigMACWithHeaderFile(
IN PDM_ODM_T pDM_Odm
)
{
#if (DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_WIN))
PADAPTER Adapter = pDM_Odm->Adapter;
#endif
u1Byte result = HAL_STATUS_SUCCESS;
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_LOUD,
("===>ODM_ConfigMACWithHeaderFile (%s)\n", (pDM_Odm->bIsMPChip) ? "MPChip" : "TestChip"));
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_LOUD,
("pDM_Odm->SupportPlatform: 0x%X, pDM_Odm->SupportInterface: 0x%X, pDM_Odm->BoardType: 0x%X\n",
pDM_Odm->SupportPlatform, pDM_Odm->SupportInterface, pDM_Odm->BoardType));
#if (RTL8723A_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8723A)
{
READ_AND_CONFIG_MP(8723A,_MAC_REG);
}
#endif
#if (RTL8188E_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8188E)
{
READ_AND_CONFIG_MP(8188E,_MAC_REG);
}
#endif
#if (RTL8812A_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8812)
{
READ_AND_CONFIG_MP(8812A,_MAC_REG);
}
#endif
#if (RTL8821A_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8821)
{
READ_AND_CONFIG_MP(8821A,_MAC_REG);
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_LOUD, ("<===8821_ODM_ConfigMACwithHeaderFile\n"));
}
#endif
#if (RTL8723B_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8723B)
{
READ_AND_CONFIG_MP(8723B,_MAC_REG);
}
#endif
#if (RTL8192E_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8192E)
{
READ_AND_CONFIG_MP(8192E,_MAC_REG);
}
#endif
return result;
}
HAL_STATUS
ODM_ConfigFWWithHeaderFile(
IN PDM_ODM_T pDM_Odm,
IN ODM_FW_Config_Type ConfigType,
OUT u1Byte *pFirmware,
OUT u4Byte *pSize
)
{
#if (RTL8188E_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8188E)
{
#ifdef CONFIG_SFW_SUPPORTED
if (ConfigType == CONFIG_FW_NIC)
{
READ_FIRMWARE_MP(8188E,_FW_NIC_T);
}
else if (ConfigType == CONFIG_FW_WoWLAN)
{
READ_FIRMWARE_MP(8188E,_FW_WoWLAN_T);
}
else if(ConfigType == CONFIG_FW_NIC_2)
{
READ_FIRMWARE_MP(8188E,_FW_NIC_S);
}
else if (ConfigType == CONFIG_FW_WoWLAN_2)
{
READ_FIRMWARE_MP(8188E,_FW_WoWLAN_S);
}
#else
if (ConfigType == CONFIG_FW_NIC)
{
READ_FIRMWARE_MP(8188E,_FW_NIC);
}
else if (ConfigType == CONFIG_FW_WoWLAN)
{
READ_FIRMWARE_MP(8188E,_FW_WoWLAN);
}
#endif
}
#endif
#if (RTL8723B_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8723B)
{
if (ConfigType == CONFIG_FW_NIC)
{
READ_FIRMWARE_MP(8723B,_FW_NIC);
}
else if (ConfigType == CONFIG_FW_WoWLAN)
{
READ_FIRMWARE_MP(8723B,_FW_WoWLAN);
}
#ifdef CONFIG_AP_WOWLAN
else if (ConfigType == CONFIG_FW_AP_WoWLAN)
{
READ_FIRMWARE(8723B,_FW_AP_WoWLAN);
}
#endif
else if (ConfigType == CONFIG_FW_BT)
{
READ_FIRMWARE_MP(8723B,_FW_BT);
}
else if (ConfigType == CONFIG_FW_MP)
{
READ_FIRMWARE_MP(8723B,_FW_MP);
}
}
#endif
#if (RTL8812A_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8812)
{
if (ConfigType == CONFIG_FW_NIC)
{
READ_FIRMWARE_MP(8812A,_FW_NIC);
}
else if (ConfigType == CONFIG_FW_WoWLAN)
{
READ_FIRMWARE_MP(8812A,_FW_WoWLAN);
}
else if (ConfigType == CONFIG_FW_BT)
{
READ_FIRMWARE_MP(8812A,_FW_NIC_BT);
}
}
#endif
#if (RTL8821A_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8821)
{
if (ConfigType == CONFIG_FW_NIC)
{
READ_FIRMWARE_MP(8821A,_FW_NIC);
}
else if (ConfigType == CONFIG_FW_WoWLAN)
{
READ_FIRMWARE_MP(8821A,_FW_WoWLAN);
}
else if (ConfigType == CONFIG_FW_BT)
{
READ_FIRMWARE_MP(8821A,_FW_NIC_BT);
}
}
#endif
#if (RTL8192E_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8192E)
{
if (ConfigType == CONFIG_FW_NIC)
{
READ_FIRMWARE_MP(8192E,_FW_NIC);
}
else if (ConfigType == CONFIG_FW_WoWLAN)
{
READ_FIRMWARE_MP(8192E,_FW_WoWLAN);
}
#ifdef CONFIG_AP_WOWLAN
else if (ConfigType == CONFIG_FW_AP_WoWLAN)
{
READ_FIRMWARE_MP(8192E,_FW_AP_WoWLAN);
}
#endif
}
#endif
return HAL_STATUS_SUCCESS;
}
u4Byte
ODM_GetHWImgVersion(
IN PDM_ODM_T pDM_Odm
)
{
u4Byte Version=0;
#if (RTL8723A_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8723A)
Version = GET_VERSION_MP(8723A,_MAC_REG);
#endif
#if (RTL8723B_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8723B)
Version = GET_VERSION_MP(8723B,_MAC_REG);
#endif
#if (RTL8188E_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8188E)
Version = GET_VERSION_MP(8188E,_MAC_REG);
#endif
#if (RTL8821A_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8821)
Version = GET_VERSION_MP(8821A,_MAC_REG);
#endif
#if (RTL8192E_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8192E)
Version = GET_VERSION_MP(8192E,_MAC_REG);
#endif
#if (RTL8812A_SUPPORT == 1)
if (pDM_Odm->SupportICType == ODM_RTL8812)
Version = GET_VERSION_MP(8812A,_MAC_REG);
#endif
return Version;
}
Reference in New Issue View Git Blame Copy Permalink