Github/rtl8192eu-linux-driver
1
0
Fork 0
mirror of https://github.com/Mange/rtl8192eu-linux-driver synced 2025-12-10 00:04:17 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated to 4.4.1

Browse Source
This commit is contained in:
CGarces
2017-05-11 20:47:23 +02:00
parent 9dde4572b4
commit 3d6c7de21a
396 changed files with 174471 additions and 106990 deletions
Download Patch File Download Diff File Expand all files Collapse all files

115
include/autoconf.h
View File

@@ -41,7 +41,7 @@
//#define CONFIG_DEBUG_CFG80211
//#define CONFIG_DRV_ISSUE_PROV_REQ // IOT FOR S2
#define CONFIG_SET_SCAN_DENY_TIMER
/*#define SUPPLICANT_RTK_VERSION_LOWER_THAN_JB42*/ /* wpa_supplicant realtek version <= jb42 will be defined this */
#endif
/*
@@ -89,13 +89,8 @@
#define CONFIG_XMIT_THREAD_MODE
#endif
//befor link
//#define CONFIG_ANTENNA_DIVERSITY
/*#define CONFIG_ANTENNA_DIVERSITY*/
//after link
#ifdef CONFIG_ANTENNA_DIVERSITY
#define CONFIG_HW_ANTENNA_DIVERSITY
#endif
//#define CONFIG_CONCURRENT_MODE
@@ -103,7 +98,7 @@
//#define CONFIG_HWPORT_SWAP //Port0->Sec , Port1 -> Pri
#define CONFIG_RUNTIME_PORT_SWITCH
//#define DBG_RUNTIME_PORT_SWITCH
#define CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
#define CONFIG_SCAN_BACKOP
//#define CONFIG_ATMEL_RC_PATCH
//#define CONFIG_TSF_RESET_OFFLOAD // For 2 PORT TSF SYNC.
#endif
@@ -115,8 +110,8 @@
#undef CONFIG_INTERRUPT_BASED_TXBCN
#endif
#ifdef CONFIG_INTERRUPT_BASED_TXBCN
//#define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT
#define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
#define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT
/*#define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR*/
#endif
#define CONFIG_NATIVEAP_MLME
@@ -124,41 +119,35 @@
#define CONFIG_HOSTAPD_MLME
#endif
#define CONFIG_FIND_BEST_CHANNEL
//#define CONFIG_NO_WIRELESS_HANDLERS
//#define CONFIG_AUTO_AP_MODE
#endif
#define CONFIG_P2P
#ifdef CONFIG_P2P
//The CONFIG_WFD is for supporting the Wi-Fi display
#define CONFIG_WFD
#ifndef CONFIG_WIFI_TEST
#define CONFIG_P2P_REMOVE_GROUP_INFO
#endif
#define CONFIG_P2P_REMOVE_GROUP_INFO
//#define CONFIG_DBG_P2P
#define CONFIG_P2P_PS
//#define CONFIG_P2P_IPS
#define CONFIG_P2P_OP_CHK_SOCIAL_CH
#define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT //replace CONFIG_P2P_CHK_INVITE_CH_LIST flag
#define CONFIG_P2P_INVITE_IOT
#endif
// Added by Kurt 20110511
//#define CONFIG_TDLS
#ifdef CONFIG_TDLS
#define CONFIG_TDLS_DRIVER_SETUP
// #ifndef CONFIG_WFD
// #define CONFIG_WFD
// #define CONFIG_WFD
// #endif
// #define CONFIG_TDLS_AUTOSETUP
// #define CONFIG_TDLS_AUTOCHECKALIVE
// #define CONFIG_TDLS_AUTOSETUP
#define CONFIG_TDLS_AUTOCHECKALIVE
#define CONFIG_TDLS_CH_SW /* Enable this flag only when we confirm that TDLS CH SW is supported in FW */
#endif
//#define CONFIG_EFUSE_CONFIG_FILE
#define CONFIG_SKB_COPY //for amsdu
//#define CONFIG_LED
@@ -169,18 +158,6 @@
#endif
#endif // CONFIG_LED
//#define CONFIG_IOL
#ifdef CONFIG_IOL
#define CONFIG_IOL_NEW_GENERATION
#define CONFIG_IOL_READ_EFUSE_MAP
//#define DBG_IOL_READ_EFUSE_MAP
//#define CONFIG_IOL_LLT
//#define CONFIG_IOL_EFUSE_PATCH
//#define CONFIG_IOL_IOREG_CFG
//#define CONFIG_IOL_IOREG_CFG_DBG
#endif
#define USB_INTERFERENCE_ISSUE // this should be checked in all usb interface
#define CONFIG_GLOBAL_UI_PID
@@ -197,9 +174,8 @@
#endif
#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
#define CONFIG_DEAUTH_BEFORE_CONNECT
#define CONFIG_TX_MCAST2UNI 1 // Support IP multicast->unicast
#define CONFIG_TX_MCAST2UNI /*Support IP multicast->unicast*/
//#define CONFIG_CHECK_AC_LIFETIME 1 // Check packet lifetime of 4 ACs.
@@ -212,7 +188,6 @@
#define CONFIG_USB_RX_AGGREGATION
#endif
#define CONFIG_PREALLOC_RECV_SKB
//#define CONFIG_REDUCE_USB_TX_INT // Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms.
//#define CONFIG_EASY_REPLACEMENT
@@ -222,10 +197,11 @@
//#define CONFIG_USE_USB_BUFFER_ALLOC_TX // Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms.
//#define CONFIG_USE_USB_BUFFER_ALLOC_RX // For RX path
#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
#undef CONFIG_PREALLOC_RECV_SKB
#else
#define CONFIG_PREALLOC_RECV_SKB
#ifdef CONFIG_PREALLOC_RECV_SKB
// #define CONFIG_FIX_NR_BULKIN_BUFFER // only use USB prealloc_recv_buffer, no use alloc_skb()
//#define CONFIG_FIX_NR_BULKIN_BUFFER /* only use PREALLOC_RECV_SKB buffer, don't alloc skb at runtime */
#endif
#endif
@@ -264,8 +240,6 @@
#define ENABLE_USB_DROP_INCORRECT_OUT
//#define RTL8192CU_ADHOC_WORKAROUND_SETTING
#define DISABLE_BB_RF 0
//#define RTL8191C_FPGA_NETWORKTYPE_ADHOC 0
@@ -283,60 +257,11 @@
/*
* Platform Related Config
*/
#ifdef CONFIG_PLATFORM_MN10300
#define CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV
#define CONFIG_USE_USB_BUFFER_ALLOC_RX
#if defined (CONFIG_SW_ANTENNA_DIVERSITY)
#undef CONFIG_SW_ANTENNA_DIVERSITY
#define CONFIG_HW_ANTENNA_DIVERSITY
#endif
#if defined (CONFIG_POWER_SAVING)
#undef CONFIG_POWER_SAVING
#endif
#endif//CONFIG_PLATFORM_MN10300
/*
* Outsource Related Config
*/
#define TESTCHIP_SUPPORT 0
#define RTL8192CE_SUPPORT 0
#define RTL8192CU_SUPPORT 0
#define RTL8192C_SUPPORT (RTL8192CE_SUPPORT|RTL8192CU_SUPPORT)
#define RTL8192DE_SUPPORT 0
#define RTL8192DU_SUPPORT 0
#define RTL8192D_SUPPORT (RTL8192DE_SUPPORT|RTL8192DU_SUPPORT)
#define RTL8723AU_SUPPORT 0
#define RTL8723AS_SUPPORT 0
#define RTL8723AE_SUPPORT 0
#define RTL8723A_SUPPORT (RTL8723AU_SUPPORT|RTL8723AS_SUPPORT|RTL8723AE_SUPPORT)
#define RTL8723_FPGA_VERIFICATION 0
#define RTL8188E_SUPPORT 0
#define RTL8812A_SUPPORT 0
#define RTL8821A_SUPPORT 0
#define RTL8723B_SUPPORT 0
#define RTL8192E_SUPPORT 1
#define RTL8814A_SUPPORT 0
#define RATE_ADAPTIVE_SUPPORT 0
#define POWER_TRAINING_ACTIVE 0
#ifdef CONFIG_BT_COEXIST
// for ODM and outsrc BT-Coex
#define BT_30_SUPPORT 1
#ifndef CONFIG_LPS
#define CONFIG_LPS // download reserved page to FW
#endif
#else // !CONFIG_BT_COEXIST
#define BT_30_SUPPORT 0
#endif // !CONFIG_BT_COEXIST
@@ -353,12 +278,14 @@
#define CONFIG_80211D
#define CONFIG_RF_POWER_TRIM
/*
* Debug Related Config
*/
#define DBG 1
#define CONFIG_DEBUG /* DBG_871X, etc... */
//#define CONFIG_DEBUG /* DBG_871X, etc... */
//#define CONFIG_DEBUG_RTL871X /* RT_TRACE, RT_PRINT_DATA, _func_enter_, _func_exit_ */
#define CONFIG_PROC_DEBUG
@@ -384,6 +311,7 @@
//#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap"
#define DBG_RX_SIGNAL_DISPLAY_RAW_DATA
//#define DBG_NOISE_MONITOR
//#define DBG_RX_COUNTER_DUMP
//#define DBG_TX_POWER_IDX
@@ -398,4 +326,5 @@
//#define CONFIG_SINGLE_XMIT_BUF
//RX use 1 urb
//#define CONFIG_SINGLE_RECV_BUF
#define DBG_RX_DFRAME_RAW_DATA