Github/rtl8192eu-linux-driver
1
0
Fork 0
mirror of https://github.com/Mange/rtl8192eu-linux-driver synced 2024-11-26 07:25:00 +00:00
Code Issues Packages Projects Releases Wiki Activity
dcd71fa873
rtl8192eu-linux-driver/include/hal_data.h
Magnus Bergmark 1387cf623d
The official RTL8192EU linux driver from D-Link Australia 
Version information: 20140812_rtl8192EU_linux_v4.3.1.1_11320
  2014-08-12
  version 4.3.1.1_11320
Source:
  ftp://files.dlink.com.au/products/DWA-131/REV_E/Drivers/DWA-131_Linux_driver_v4.3.1.1.zip

This version does not currently work on newer kernels, but it does
contain USB ID 2001:3319, which a lot of other repos in GitHub does not.
2015-08-18 21:03:11 +02:00

694 lines
18 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __HAL_DATA_H__
#define __HAL_DATA_H__
#if 1//def CONFIG_SINGLE_IMG
#include "../hal/OUTSRC/odm_precomp.h"
#ifdef CONFIG_BT_COEXIST
#include <hal_btcoex.h>
#endif
#ifdef CONFIG_SDIO_HCI
#include <hal_sdio.h>
#endif
//
// <Roger_Notes> For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06.
//
typedef enum _RT_MULTI_FUNC{
RT_MULTI_FUNC_NONE = 0x00,
RT_MULTI_FUNC_WIFI = 0x01,
RT_MULTI_FUNC_BT = 0x02,
RT_MULTI_FUNC_GPS = 0x04,
}RT_MULTI_FUNC,*PRT_MULTI_FUNC;
//
// <Roger_Notes> For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08.
//
typedef enum _RT_POLARITY_CTL {
RT_POLARITY_LOW_ACT = 0,
RT_POLARITY_HIGH_ACT = 1,
} RT_POLARITY_CTL, *PRT_POLARITY_CTL;
// For RTL8723 regulator mode. by tynli. 2011.01.14.
typedef enum _RT_REGULATOR_MODE {
RT_SWITCHING_REGULATOR = 0,
RT_LDO_REGULATOR = 1,
} RT_REGULATOR_MODE, *PRT_REGULATOR_MODE;
//
// Interface type.
//
typedef enum _INTERFACE_SELECT_PCIE{
INTF_SEL0_SOLO_MINICARD = 0, // WiFi solo-mCard
INTF_SEL1_BT_COMBO_MINICARD = 1, // WiFi+BT combo-mCard
INTF_SEL2_PCIe = 2, // PCIe Card
} INTERFACE_SELECT_PCIE, *PINTERFACE_SELECT_PCIE;
typedef enum _INTERFACE_SELECT_USB{
INTF_SEL0_USB = 0, // USB
INTF_SEL1_USB_High_Power = 1, // USB with high power PA
INTF_SEL2_MINICARD = 2, // Minicard
INTF_SEL3_USB_Solo = 3, // USB solo-Slim module
INTF_SEL4_USB_Combo = 4, // USB Combo-Slim module
INTF_SEL5_USB_Combo_MF = 5, // USB WiFi+BT Multi-Function Combo, i.e., Proprietary layout(AS-VAU) which is the same as SDIO card
} INTERFACE_SELECT_USB, *PINTERFACE_SELECT_USB;
typedef enum _RT_AMPDU_BRUST_MODE{
RT_AMPDU_BRUST_NONE = 0,
RT_AMPDU_BRUST_92D = 1,
RT_AMPDU_BRUST_88E = 2,
RT_AMPDU_BRUST_8812_4 = 3,
RT_AMPDU_BRUST_8812_8 = 4,
RT_AMPDU_BRUST_8812_12 = 5,
RT_AMPDU_BRUST_8812_15 = 6,
RT_AMPDU_BRUST_8723B = 7,
}RT_AMPDU_BRUST,*PRT_AMPDU_BRUST_MODE;
#define CHANNEL_MAX_NUMBER 14+24+21 // 14 is the max channel number
#define CHANNEL_MAX_NUMBER_2G 14
#define CHANNEL_MAX_NUMBER_5G 54 // Please refer to "phy_GetChnlGroup8812A" and "Hal_ReadTxPowerInfo8812A"
#define CHANNEL_MAX_NUMBER_5G_80M 7
#define CHANNEL_GROUP_MAX 3+9 // ch1~3, ch4~9, ch10~14 total three groups
#define MAX_PG_GROUP 13
// Tx Power Limit Table Size
#define MAX_REGULATION_NUM 4
#define MAX_RF_PATH_NUM_IN_POWER_LIMIT_TABLE 4
#define MAX_2_4G_BANDWITH_NUM 2
#define MAX_RATE_SECTION_NUM 10
#define MAX_5G_BANDWITH_NUM 4
#define MAX_BASE_NUM_IN_PHY_REG_PG_2_4G 10 // CCK:1,OFDM:1, HT:4, VHT:4
#define MAX_BASE_NUM_IN_PHY_REG_PG_5G 9 // OFDM:1, HT:4, VHT:4
//###### duplicate code,will move to ODM #########
//#define IQK_MAC_REG_NUM 4
//#define IQK_ADDA_REG_NUM 16
//#define IQK_BB_REG_NUM 10
#define IQK_BB_REG_NUM_92C 9
#define IQK_BB_REG_NUM_92D 10
#define IQK_BB_REG_NUM_test 6
#define IQK_Matrix_Settings_NUM_92D 1+24+21
//#define HP_THERMAL_NUM 8
//###### duplicate code,will move to ODM #########
#if defined(CONFIG_RTL8192D) || defined(CONFIG_BT_COEXIST)
typedef enum _MACPHY_MODE_8192D{
SINGLEMAC_SINGLEPHY, //SMSP
DUALMAC_DUALPHY, //DMDP
DUALMAC_SINGLEPHY, //DMSP
}MACPHY_MODE_8192D,*PMACPHY_MODE_8192D;
#endif
#ifdef CONFIG_USB_RX_AGGREGATION
typedef enum _USB_RX_AGG_MODE{
USB_RX_AGG_DISABLE,
USB_RX_AGG_DMA,
USB_RX_AGG_USB,
USB_RX_AGG_MIX
}USB_RX_AGG_MODE;
//#define MAX_RX_DMA_BUFFER_SIZE 10240 // 10K for 8192C RX DMA buffer
#endif
#define PAGE_SIZE_128 128
#define PAGE_SIZE_256 256
#define PAGE_SIZE_512 512
struct dm_priv
{
u8 DM_Type;
#define DYNAMIC_FUNC_BT BIT0
u8 DMFlag;
u8 InitDMFlag;
//u8 RSVD_1;
u32 InitODMFlag;
//* Upper and Lower Signal threshold for Rate Adaptive*/
int UndecoratedSmoothedPWDB;
int UndecoratedSmoothedCCK;
int EntryMinUndecoratedSmoothedPWDB;
int EntryMaxUndecoratedSmoothedPWDB;
int MinUndecoratedPWDBForDM;
int LastMinUndecoratedPWDBForDM;
s32 UndecoratedSmoothedBeacon;
//###### duplicate code,will move to ODM #########
//for High Power
u8 bDynamicTxPowerEnable;
u8 LastDTPLvl;
u8 DynamicTxHighPowerLvl;//Add by Jacken Tx Power Control for Near/Far Range 2008/03/06
//for tx power tracking
u8 bTXPowerTracking;
u8 TXPowercount;
u8 bTXPowerTrackingInit;
u8 TxPowerTrackControl; //for mp mode, turn off txpwrtracking as default
u8 TM_Trigger;
u8 ThermalMeter[2]; // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
u8 ThermalValue;
u8 ThermalValue_LCK;
u8 ThermalValue_IQK;
u8 ThermalValue_DPK;
u8 bRfPiEnable;
//u8 RSVD_2;
//for APK
u32 APKoutput[2][2]; //path A/B; output1_1a/output1_2a
u8 bAPKdone;
u8 bAPKThermalMeterIgnore;
u8 bDPdone;
u8 bDPPathAOK;
u8 bDPPathBOK;
//u8 RSVD_3;
//u8 RSVD_4;
//u8 RSVD_5;
//for IQK
u32 ADDA_backup[IQK_ADDA_REG_NUM];
u32 IQK_MAC_backup[IQK_MAC_REG_NUM];
u32 IQK_BB_backup_recover[9];
u32 IQK_BB_backup[IQK_BB_REG_NUM];
u8 PowerIndex_backup[6];
u8 OFDM_index[2];
u8 bCCKinCH14;
u8 CCK_index;
u8 bDoneTxpower;
u8 CCK_index_HP;
u8 OFDM_index_HP[2];
u8 ThermalValue_HP[HP_THERMAL_NUM];
u8 ThermalValue_HP_index;
//u8 RSVD_6;
//for TxPwrTracking2
s32 RegE94;
s32 RegE9C;
s32 RegEB4;
s32 RegEBC;
u32 TXPowerTrackingCallbackCnt; //cosa add for debug
u32 prv_traffic_idx; // edca turbo
#ifdef CONFIG_RTL8192D
u8 ThermalValue_AVG[AVG_THERMAL_NUM];
u8 ThermalValue_AVG_index;
u8 ThermalValue_RxGain;
u8 ThermalValue_Crystal;
u8 bReloadtxpowerindex;
u32 RegD04_MP;
u8 RegC04_MP;
u8 Delta_IQK;
u8 Delta_LCK;
//u8 RSVD_7;
BOOLEAN bDPKdone[2];
//u16 RSVD_8;
u32 RegA24;
u32 RegRF3C[2]; //pathA / pathB
#endif
//###### duplicate code,will move to ODM #########
// Add for Reading Initial Data Rate SEL Register 0x484 during watchdog. Using for fill tx desc. 2011.3.21 by Thomas
u8 INIDATA_RATE[32];
};
typedef struct hal_com_data
{
HAL_VERSION VersionID;
RT_MULTI_FUNC MultiFunc; // For multi-function consideration.
RT_POLARITY_CTL PolarityCtl; // For Wifi PDn Polarity control.
RT_REGULATOR_MODE RegulatorMode; // switching regulator or LDO
u16 FirmwareVersion;
u16 FirmwareVersionRev;
u16 FirmwareSubVersion;
u16 FirmwareSignature;
//current WIFI_PHY values
WIRELESS_MODE CurrentWirelessMode;
CHANNEL_WIDTH CurrentChannelBW;
BAND_TYPE CurrentBandType; //0:2.4G, 1:5G
BAND_TYPE BandSet;
u8 CurrentChannel;
u8 CurrentCenterFrequencyIndex1;
u8 nCur40MhzPrimeSC;// Control channel sub-carrier
u8 nCur80MhzPrimeSC; //used for primary 40MHz of 80MHz mode
u16 CustomerID;
u16 BasicRateSet;
u16 ForcedDataRate;// Force Data Rate. 0: Auto, 0x02: 1M ~ 0x6C: 54M.
u32 ReceiveConfig;
//rf_ctrl
u8 rf_chip;
u8 rf_type;
u8 PackageType;
u8 NumTotalRFPath;
u8 InterfaceSel;
u8 framesync;
u32 framesyncC34;
u8 framesyncMonitor;
u8 DefaultInitialGain[4];
//
// EEPROM setting.
//
u16 EEPROMVID;
u16 EEPROMSVID;
#ifdef CONFIG_USB_HCI
u16 EEPROMPID;
u16 EEPROMSDID;
#endif
#ifdef CONFIG_PCI_HCI
u16 EEPROMDID;
u16 EEPROMSMID;
#endif
u8 EEPROMCustomerID;
u8 EEPROMSubCustomerID;
u8 EEPROMVersion;
u8 EEPROMRegulatory;
u8 EEPROMThermalMeter;
u8 EEPROMBluetoothCoexist;
u8 EEPROMBluetoothType;
u8 EEPROMBluetoothAntNum;
u8 EEPROMBluetoothAntIsolation;
u8 EEPROMBluetoothRadioShared;
u8 bTXPowerDataReadFromEEPORM;
u8 bAPKThermalMeterIgnore;
u8 bDisableSWChannelPlan; // flag of disable software change channel plan
BOOLEAN EepromOrEfuse;
u8 EfuseUsedPercentage;
u16 EfuseUsedBytes;
//u8 EfuseMap[2][HWSET_MAX_SIZE_JAGUAR];
EFUSE_HAL EfuseHal;
//---------------------------------------------------------------------------------//
//3 [2.4G]
u8 Index24G_CCK_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
u8 Index24G_BW40_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
//If only one tx, only BW20 and OFDM are used.
s8 CCK_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 OFDM_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW20_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW40_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
//3 [5G]
u8 Index5G_BW40_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
u8 Index5G_BW80_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER_5G_80M];
s8 OFDM_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW20_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW40_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW80_5G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
u8 Regulation2_4G;
u8 Regulation5G;
u8 TxPwrInPercentage;
u8 TxPwrCalibrateRate;
//
// TX power by rate table at most 4RF path.
// The register is
//
// VHT TX power by rate off setArray =
// Band:-2G&5G = 0 / 1
// RF: at most 4*4 = ABCD=0/1/2/3
// CCK=0 OFDM=1/2 HT-MCS 0-15=3/4/56 VHT=7/8/9/10/11
//
u8 TxPwrByRateTable;
u8 TxPwrByRateBand;
s8 TxPwrByRateOffset[TX_PWR_BY_RATE_NUM_BAND]
[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RATE];
//---------------------------------------------------------------------------------//
//2 Power Limit Table
u8 TxPwrLevelCck[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
u8 TxPwrLevelHT40_1S[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr
u8 TxPwrLevelHT40_2S[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr
u8 TxPwrHt20Diff[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff
u8 TxPwrLegacyHtDiff[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff
// Power Limit Table for 2.4G
u8 TxPwrLimit_2_4G[MAX_REGULATION_NUM]
[MAX_2_4G_BANDWITH_NUM]
[MAX_RATE_SECTION_NUM]
[CHANNEL_MAX_NUMBER_2G]
[MAX_RF_PATH_NUM];
// Power Limit Table for 5G
u8 TxPwrLimit_5G[MAX_REGULATION_NUM]
[MAX_5G_BANDWITH_NUM]
[MAX_RATE_SECTION_NUM]
[CHANNEL_MAX_NUMBER_5G]
[MAX_RF_PATH_NUM];
// Store the original power by rate value of the base of each rate section of rf path A & B
u8 TxPwrByRateBase2_4G[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RF]
[MAX_BASE_NUM_IN_PHY_REG_PG_2_4G];
u8 TxPwrByRateBase5G[TX_PWR_BY_RATE_NUM_RF]
[TX_PWR_BY_RATE_NUM_RF]
[MAX_BASE_NUM_IN_PHY_REG_PG_5G];
// For power group
u8 PwrGroupHT20[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
u8 PwrGroupHT40[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
u8 PGMaxGroup;
u8 LegacyHTTxPowerDiff;// Legacy to HT rate power diff
// The current Tx Power Level
u8 CurrentCckTxPwrIdx;
u8 CurrentOfdm24GTxPwrIdx;
u8 CurrentBW2024GTxPwrIdx;
u8 CurrentBW4024GTxPwrIdx;
// Read/write are allow for following hardware information variables
u8 pwrGroupCnt;
u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
u32 CCKTxPowerLevelOriginalOffset;
u8 CrystalCap;
u32 AntennaTxPath; // Antenna path Tx
u32 AntennaRxPath; // Antenna path Rx
u8 PAType_2G;
u8 PAType_5G;
u8 LNAType_2G;
u8 LNAType_5G;
u8 ExternalPA_2G;
u8 ExternalLNA_2G;
u8 ExternalPA_5G;
u8 ExternalLNA_5G;
u8 TypeGLNA;
u8 TypeGPA;
u8 TypeALNA;
u8 TypeAPA;
u8 RFEType;
u8 BoardType;
u8 ExternalPA;
u8 bIQKInitialized;
BOOLEAN bLCKInProgress;
BOOLEAN bSwChnl;
BOOLEAN bSetChnlBW;
BOOLEAN bChnlBWInitialized;
BOOLEAN bNeedIQK;
u8 bLedOpenDrain; // Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16.
u8 TxPowerTrackControl; //for mp mode, turn off txpwrtracking as default
u8 b1x1RecvCombine; // for 1T1R receive combining
u32 AcParam_BE; //Original parameter for BE, use for EDCA turbo.
BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D
u32 RfRegChnlVal[2];
//RDG enable
BOOLEAN bRDGEnable;
//for host message to fw
u8 LastHMEBoxNum;
u8 fw_ractrl;
u8 RegTxPause;
// Beacon function related global variable.
u8 RegBcnCtrlVal;
u8 RegFwHwTxQCtrl;
u8 RegReg542;
u8 RegCR_1;
u8 Reg837;
u8 RegRFPathS1;
u16 RegRRSR;
u8 CurAntenna;
u8 AntDivCfg;
u8 AntDetection;
u8 TRxAntDivType;
u8 u1ForcedIgiLb; // forced IGI lower bound
u8 bDumpRxPkt;//for debug
u8 bDumpTxPkt;//for debug
u8 FwRsvdPageStartOffset; //2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ.
// 2010/08/09 MH Add CU power down mode.
BOOLEAN pwrdown;
// Add for dual MAC 0--Mac0 1--Mac1
u32 interfaceIndex;
u8 OutEpQueueSel;
u8 OutEpNumber;
// 2010/12/10 MH Add for USB aggreation mode dynamic shceme.
BOOLEAN UsbRxHighSpeedMode;
// 2010/11/22 MH Add for slim combo debug mode selective.
// This is used for fix the drawback of CU TSMC-A/UMC-A cut. HW auto suspend ability. Close BT clock.
BOOLEAN SlimComboDbg;
#ifdef CONFIG_P2P
u8 p2p_ps_offload;
#endif
u8 AMPDUDensity;
// Auto FSM to Turn On, include clock, isolation, power control for MAC only
u8 bMacPwrCtrlOn;
u8 RegIQKFWOffload;
struct submit_ctx iqk_sctx;
RT_AMPDU_BRUST AMPDUBurstMode; //92C maybe not use, but for compile successfully
#ifdef CONFIG_SDIO_HCI
//
// For SDIO Interface HAL related
//
//
// SDIO ISR Related
//
// u32 IntrMask[1];
// u32 IntrMaskToSet[1];
// LOG_INTERRUPT InterruptLog;
u32 sdio_himr;
u32 sdio_hisr;
//
// SDIO Tx FIFO related.
//
// HIQ, MID, LOW, PUB free pages; padapter->xmitpriv.free_txpg
u8 SdioTxFIFOFreePage[SDIO_TX_FREE_PG_QUEUE];
_lock SdioTxFIFOFreePageLock;
u8 SdioTxOQTMaxFreeSpace;
u8 SdioTxOQTFreeSpace;
//
// SDIO Rx FIFO related.
//
u8 SdioRxFIFOCnt;
u16 SdioRxFIFOSize;
u32 sdio_tx_max_len[SDIO_MAX_TX_QUEUE];// H, N, L, used for sdio tx aggregation max length per queue
#endif //CONFIG_SDIO_HCI
#ifdef CONFIG_USB_HCI
u32 UsbBulkOutSize;
BOOLEAN bSupportUSB3;
// Interrupt relatd register information.
u32 IntArray[3];//HISR0,HISR1,HSISR
u32 IntrMask[3];
u8 C2hArray[16];
#ifdef CONFIG_USB_TX_AGGREGATION
u8 UsbTxAggMode;
u8 UsbTxAggDescNum;
#endif // CONFIG_USB_TX_AGGREGATION
#ifdef CONFIG_USB_RX_AGGREGATION
u16 HwRxPageSize; // Hardware setting
u32 MaxUsbRxAggBlock;
USB_RX_AGG_MODE UsbRxAggMode;
u8 UsbRxAggBlockCount; //FOR USB Mode, USB Block count. Block size is 512-byte in hight speed and 64-byte in full speed
u8 UsbRxAggBlockTimeout;
u8 UsbRxAggPageCount; //FOR DMA Mode, 8192C DMA page count
u8 UsbRxAggPageTimeout;
u8 RegAcUsbDmaSize;
u8 RegAcUsbDmaTime;
#endif//CONFIG_USB_RX_AGGREGATION
#endif //CONFIG_USB_HCI
#ifdef CONFIG_PCI_HCI
//
// EEPROM setting.
//
u16 EEPROMChannelPlan;
u8 EEPROMTSSI[2];
u8 EEPROMBoardType;
u32 TransmitConfig;
u32 IntrMaskToSet[2];
u32 IntArray[2];
u32 IntrMask[2];
u32 SysIntArray[1];
u32 SysIntrMask[1];
u32 IntrMaskReg[2];
u32 IntrMaskDefault[2];
BOOLEAN bL1OffSupport;
BOOLEAN bSupportBackDoor;
u8 bDefaultAntenna;
//u8 bIQKInitialized;
u8 bInterruptMigration;
u8 bDisableTxInt;
#endif //CONFIG_PCI_HCI
struct dm_priv dmpriv;
DM_ODM_T odmpriv;
#ifdef DBG_CONFIG_ERROR_DETECT
struct sreset_priv srestpriv;
#endif //#ifdef DBG_CONFIG_ERROR_DETECT
#ifdef CONFIG_BT_COEXIST
// For bluetooth co-existance
BT_COEXIST bt_coexist;
#ifdef CONFIG_RTL8723A
u8 bAntennaDetected;
#endif // CONFIG_RTL8723A
#endif // CONFIG_BT_COEXIST
#if defined(CONFIG_RTL8723A) || defined(CONFIG_RTL8723B)
#ifndef CONFIG_PCI_HCI // mutual exclusive with PCI -- so they're SDIO and GSPI
// Interrupt relatd register information.
u32 SysIntrStatus;
u32 SysIntrMask;
#endif
#endif //endif CONFIG_RTL8723A
#if defined(CONFIG_RTL8192C) ||defined(CONFIG_RTL8192D)
u8 BluetoothCoexist;
u8 EEPROMChnlAreaTxPwrCCK[2][3];
u8 EEPROMChnlAreaTxPwrHT40_1S[2][3];
u8 EEPROMChnlAreaTxPwrHT40_2SDiff[2][3];
u8 EEPROMPwrLimitHT20[3];
u8 EEPROMPwrLimitHT40[3];
#ifdef CONFIG_RTL8192D
MACPHY_MODE_8192D MacPhyMode92D;
BAND_TYPE CurrentBandType92D; //0:2.4G, 1:5G
BAND_TYPE BandSet92D;
BOOLEAN bMasterOfDMSP;
BOOLEAN bSlaveOfDMSP;
IQK_MATRIX_REGS_SETTING IQKMatrixRegSetting[IQK_Matrix_Settings_NUM_92D];
#ifdef CONFIG_DUALMAC_CONCURRENT
BOOLEAN bInModeSwitchProcess;
#endif
u8 AutoLoadStatusFor8192D;
u8 EEPROMC9;
u8 EEPROMCC;
u8 PAMode;
u8 InternalPA5G[2]; //pathA / pathB
BOOLEAN bPhyValueInitReady;
BOOLEAN bLoadIMRandIQKSettingFor2G;// True if IMR or IQK have done for 2.4G in scan progress
BOOLEAN bNOPG;
BOOLEAN bIsVS;
//Query RF by FW
BOOLEAN bReadRFbyFW;
BOOLEAN bEarlyModeEnable;
BOOLEAN bSupportRemoteWakeUp;
BOOLEAN bInSetPower;
u8 RTSInitRate; // 2010.11.24.by tynli.
#endif //CONFIG_RTL8192D
#endif //defined(CONFIG_RTL8192C) ||defined(CONFIG_RTL8192D)
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
char para_file_buf[MAX_PARA_FILE_BUF_LEN];
char *mac_reg;
u32 mac_reg_len;
char *bb_phy_reg;
u32 bb_phy_reg_len;
char *bb_agc_tab;
u32 bb_agc_tab_len;
char *bb_phy_reg_pg;
u32 bb_phy_reg_pg_len;
char *bb_phy_reg_mp;
u32 bb_phy_reg_mp_len;
char *rf_radio_a;
u32 rf_radio_a_len;
char *rf_radio_b;
u32 rf_radio_b_len;
char *rf_tx_pwr_track;
u32 rf_tx_pwr_track_len;
char *rf_tx_pwr_lmt;
u32 rf_tx_pwr_lmt_len;
#endif
} HAL_DATA_COMMON, *PHAL_DATA_COMMON;
typedef struct hal_com_data HAL_DATA_TYPE, *PHAL_DATA_TYPE;
#define GET_HAL_DATA(__pAdapter) ((HAL_DATA_TYPE *)((__pAdapter)->HalData))
#define GET_HAL_RFPATH_NUM(__pAdapter) (((HAL_DATA_TYPE *)((__pAdapter)->HalData))->NumTotalRFPath )
#define RT_GetInterfaceSelection(_Adapter) (GET_HAL_DATA(_Adapter)->InterfaceSel)
#define GET_RF_TYPE(__pAdapter) (GET_HAL_DATA(__pAdapter)->rf_type)
#endif
#endif //__HAL_DATA_H__
Reference in New Issue View Git Blame Copy Permalink