Github/rtl8192eu-linux-driver
1
0
Fork 0
mirror of https://github.com/Mange/rtl8192eu-linux-driver synced 2024-12-26 14:01:45 +00:00
Code Issues Packages Projects Releases Wiki Activity
5c288352ab
rtl8192eu-linux-driver/include/rtw_pwrctrl.h
Magnus Bergmark 1387cf623d
The official RTL8192EU linux driver from D-Link Australia 
Version information: 20140812_rtl8192EU_linux_v4.3.1.1_11320
  2014-08-12
  version 4.3.1.1_11320
Source:
  ftp://files.dlink.com.au/products/DWA-131/REV_E/Drivers/DWA-131_Linux_driver_v4.3.1.1.zip

This version does not currently work on newer kernels, but it does
contain USB ID 2001:3319, which a lot of other repos in GitHub does not.
2015-08-18 21:03:11 +02:00

467 lines
13 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __RTW_PWRCTRL_H_
#define __RTW_PWRCTRL_H_
#define FW_PWR0 0
#define FW_PWR1 1
#define FW_PWR2 2
#define FW_PWR3 3
#define HW_PWR0 7
#define HW_PWR1 6
#define HW_PWR2 2
#define HW_PWR3 0
#define HW_PWR4 8
#define FW_PWRMSK 0x7
#define XMIT_ALIVE BIT(0)
#define RECV_ALIVE BIT(1)
#define CMD_ALIVE BIT(2)
#define EVT_ALIVE BIT(3)
#ifdef CONFIG_BT_COEXIST
#define BTCOEX_ALIVE BIT(4)
#endif // CONFIG_BT_COEXIST
enum Power_Mgnt
{
PS_MODE_ACTIVE = 0 ,
PS_MODE_MIN ,
PS_MODE_MAX ,
PS_MODE_DTIM , //PS_MODE_SELF_DEFINED
PS_MODE_VOIP ,
PS_MODE_UAPSD_WMM ,
PS_MODE_UAPSD ,
PS_MODE_IBSS ,
PS_MODE_WWLAN ,
PM_Radio_Off ,
PM_Card_Disable ,
PS_MODE_NUM,
};
#ifdef CONFIG_PNO_SUPPORT
#define MAX_PNO_LIST_COUNT 16
#define MAX_SCAN_LIST_COUNT 14 //2.4G only
#endif
/*
BIT[2:0] = HW state
BIT[3] = Protocol PS state, 0: register active state , 1: register sleep state
BIT[4] = sub-state
*/
#define PS_DPS BIT(0)
#define PS_LCLK (PS_DPS)
#define PS_RF_OFF BIT(1)
#define PS_ALL_ON BIT(2)
#define PS_ST_ACTIVE BIT(3)
#define PS_ISR_ENABLE BIT(4)
#define PS_IMR_ENABLE BIT(5)
#define PS_ACK BIT(6)
#define PS_TOGGLE BIT(7)
#define PS_STATE_MASK (0x0F)
#define PS_STATE_HW_MASK (0x07)
#define PS_SEQ_MASK (0xc0)
#define PS_STATE(x) (PS_STATE_MASK & (x))
#define PS_STATE_HW(x) (PS_STATE_HW_MASK & (x))
#define PS_SEQ(x) (PS_SEQ_MASK & (x))
#define PS_STATE_S0 (PS_DPS)
#define PS_STATE_S1 (PS_LCLK)
#define PS_STATE_S2 (PS_RF_OFF)
#define PS_STATE_S3 (PS_ALL_ON)
#define PS_STATE_S4 ((PS_ST_ACTIVE) | (PS_ALL_ON))
#define PS_IS_RF_ON(x) ((x) & (PS_ALL_ON))
#define PS_IS_ACTIVE(x) ((x) & (PS_ST_ACTIVE))
#define CLR_PS_STATE(x) ((x) = ((x) & (0xF0)))
struct reportpwrstate_parm {
unsigned char mode;
unsigned char state; //the CPWM value
unsigned short rsvd;
};
typedef _sema _pwrlock;
__inline static void _init_pwrlock(_pwrlock *plock)
{
_rtw_init_sema(plock, 1);
}
__inline static void _free_pwrlock(_pwrlock *plock)
{
_rtw_free_sema(plock);
}
__inline static void _enter_pwrlock(_pwrlock *plock)
{
_rtw_down_sema(plock);
}
__inline static void _exit_pwrlock(_pwrlock *plock)
{
_rtw_up_sema(plock);
}
#define LPS_DELAY_TIME 1*HZ // 1 sec
#define EXE_PWR_NONE 0x01
#define EXE_PWR_IPS 0x02
#define EXE_PWR_LPS 0x04
// RF state.
typedef enum _rt_rf_power_state
{
rf_on, // RF is on after RFSleep or RFOff
rf_sleep, // 802.11 Power Save mode
rf_off, // HW/SW Radio OFF or Inactive Power Save
//=====Add the new RF state above this line=====//
rf_max
}rt_rf_power_state;
// RF Off Level for IPS or HW/SW radio off
#define RT_RF_OFF_LEVL_ASPM BIT(0) // PCI ASPM
#define RT_RF_OFF_LEVL_CLK_REQ BIT(1) // PCI clock request
#define RT_RF_OFF_LEVL_PCI_D3 BIT(2) // PCI D3 mode
#define RT_RF_OFF_LEVL_HALT_NIC BIT(3) // NIC halt, re-initialize hw parameters
#define RT_RF_OFF_LEVL_FREE_FW BIT(4) // FW free, re-download the FW
#define RT_RF_OFF_LEVL_FW_32K BIT(5) // FW in 32k
#define RT_RF_PS_LEVEL_ALWAYS_ASPM BIT(6) // Always enable ASPM and Clock Req in initialization.
#define RT_RF_LPS_DISALBE_2R BIT(30) // When LPS is on, disable 2R if no packet is received or transmittd.
#define RT_RF_LPS_LEVEL_ASPM BIT(31) // LPS with ASPM
#define RT_IN_PS_LEVEL(ppsc, _PS_FLAG) ((ppsc->cur_ps_level & _PS_FLAG) ? _TRUE : _FALSE)
#define RT_CLEAR_PS_LEVEL(ppsc, _PS_FLAG) (ppsc->cur_ps_level &= (~(_PS_FLAG)))
#define RT_SET_PS_LEVEL(ppsc, _PS_FLAG) (ppsc->cur_ps_level |= _PS_FLAG)
// ASPM OSC Control bit, added by Roger, 2013.03.29.
#define RT_PCI_ASPM_OSC_IGNORE 0 // PCI ASPM ignore OSC control in default
#define RT_PCI_ASPM_OSC_ENABLE BIT0 // PCI ASPM controlled by OS according to ACPI Spec 5.0
#define RT_PCI_ASPM_OSC_DISABLE BIT1 // PCI ASPM controlled by driver or BIOS, i.e., force enable ASPM
enum _PS_BBRegBackup_ {
PSBBREG_RF0 = 0,
PSBBREG_RF1,
PSBBREG_RF2,
PSBBREG_AFE0,
PSBBREG_TOTALCNT
};
enum { // for ips_mode
IPS_NONE=0,
IPS_NORMAL,
IPS_LEVEL_2,
IPS_NUM
};
// Design for pwrctrl_priv.ips_deny, 32 bits for 32 reasons at most
typedef enum _PS_DENY_REASON
{
PS_DENY_DRV_INITIAL = 0,
PS_DENY_SCAN,
PS_DENY_JOIN,
PS_DENY_DISCONNECT,
PS_DENY_SUSPEND,
PS_DENY_IOCTL,
PS_DENY_MGNT_TX,
PS_DENY_DRV_REMOVE = 30,
PS_DENY_OTHERS = 31
} PS_DENY_REASON;
#ifdef CONFIG_PNO_SUPPORT
typedef struct pno_nlo_info
{
u32 fast_scan_period; //Fast scan period
u32 ssid_num; //number of entry
u32 slow_scan_period; //slow scan period
u32 fast_scan_iterations; //Fast scan iterations
u8 ssid_length[MAX_PNO_LIST_COUNT]; //SSID Length Array
u8 ssid_cipher_info[MAX_PNO_LIST_COUNT]; //Cipher information for security
u8 ssid_channel_info[MAX_PNO_LIST_COUNT]; //channel information
}pno_nlo_info_t;
typedef struct pno_ssid {
u32 SSID_len;
u8 SSID[32];
} pno_ssid_t;
typedef struct pno_ssid_list {
pno_ssid_t node[MAX_PNO_LIST_COUNT];
}pno_ssid_list_t;
typedef struct pno_scan_channel_info
{
u8 channel;
u8 tx_power;
u8 timeout;
u8 active; //set 1 means active scan, or pasivite scan.
}pno_scan_channel_info_t;
typedef struct pno_scan_info
{
u8 enableRFE; //Enable RFE
u8 period_scan_time; //exclusive with fast_scan_period and slow_scan_period
u8 periodScan; //exclusive with fast_scan_period and slow_scan_period
u8 orig_80_offset; //original channel 80 offset
u8 orig_40_offset; //original channel 40 offset
u8 orig_bw; //original bandwidth
u8 orig_ch; //original channel
u8 channel_num; //number of channel
u64 rfe_type; //rfe_type && 0x00000000000000ff
pno_scan_channel_info_t ssid_channel_info[MAX_SCAN_LIST_COUNT];
}pno_scan_info_t;
#endif //CONFIG_PNO_SUPPORT
struct pwrctrl_priv
{
_pwrlock lock;
_pwrlock check_32k_lock;
volatile u8 rpwm; // requested power state for fw
volatile u8 cpwm; // fw current power state. updated when 1. read from HCPWM 2. driver lowers power level
volatile u8 tog; // toggling
volatile u8 cpwm_tog; // toggling
u8 pwr_mode;
u8 smart_ps;
u8 bcn_ant_mode;
u8 dtim;
u32 alives;
_workitem cpwm_event;
#ifdef CONFIG_LPS_RPWM_TIMER
u8 brpwmtimeout;
_workitem rpwmtimeoutwi;
_timer pwr_rpwm_timer;
#endif // CONFIG_LPS_RPWM_TIMER
u8 bpower_saving; //for LPS/IPS
u8 b_hw_radio_off;
u8 reg_rfoff;
u8 reg_pdnmode; //powerdown mode
u32 rfoff_reason;
//RF OFF Level
u32 cur_ps_level;
u32 reg_rfps_level;
uint ips_enter_cnts;
uint ips_leave_cnts;
u8 ips_mode;
u8 ips_org_mode;
u8 ips_mode_req; // used to accept the mode setting request, will update to ipsmode later
uint bips_processing;
u32 ips_deny_time; /* will deny IPS when system time is smaller than this */
u8 pre_ips_type;// 0: default flow, 1: carddisbale flow
// ps_deny: if 0, power save is free to go; otherwise deny all kinds of power save.
// Use PS_DENY_REASON to decide reason.
// Don't access this variable directly without control function,
// and this variable should be protected by lock.
u32 ps_deny;
u8 ps_processing; /* temporarily used to mark whether in rtw_ps_processor */
u8 fw_psmode_iface_id;
u8 bLeisurePs;
u8 LpsIdleCount;
u8 power_mgnt;
u8 org_power_mgnt;
u8 bFwCurrentInPSMode;
u32 DelayLPSLastTimeStamp;
s32 pnp_current_pwr_state;
u8 pnp_bstop_trx;
u8 bInternalAutoSuspend;
u8 bInSuspend;
#ifdef CONFIG_BT_COEXIST
u8 bAutoResume;
u8 autopm_cnt;
#endif
u8 bSupportRemoteWakeup;
u8 wowlan_wake_reason;
u8 wowlan_ap_mode;
u8 wowlan_mode;
#ifdef CONFIG_WOWLAN
u8 wowlan_pattern;
u8 wowlan_magic;
u8 wowlan_unicast;
u8 wowlan_pattern_idx;
u8 wowlan_pno_enable;
#ifdef CONFIG_PNO_SUPPORT
u8 pno_in_resume;
pno_nlo_info_t *pnlo_info;
pno_scan_info_t *pscan_info;
pno_ssid_list_t *pno_ssid_list;
#endif
u32 wowlan_pattern_context[8][5];
u64 wowlan_fw_iv;
#endif // CONFIG_WOWLAN
_timer pwr_state_check_timer;
int pwr_state_check_interval;
u8 pwr_state_check_cnts;
int ps_flag; /* used by autosuspend */
rt_rf_power_state rf_pwrstate;//cur power state, only for IPS
//rt_rf_power_state current_rfpwrstate;
rt_rf_power_state change_rfpwrstate;
u8 bHWPowerdown; /* power down mode selection. 0:radio off, 1:power down */
u8 bHWPwrPindetect; /* come from registrypriv.hwpwrp_detect. enable power down function. 0:disable, 1:enable */
u8 bkeepfwalive;
u8 brfoffbyhw;
unsigned long PS_BBRegBackup[PSBBREG_TOTALCNT];
#ifdef CONFIG_RESUME_IN_WORKQUEUE
struct workqueue_struct *rtw_workqueue;
_workitem resume_work;
#endif
#ifdef CONFIG_HAS_EARLYSUSPEND
struct early_suspend early_suspend;
u8 do_late_resume;
#endif //CONFIG_HAS_EARLYSUSPEND
#ifdef CONFIG_ANDROID_POWER
android_early_suspend_t early_suspend;
u8 do_late_resume;
#endif
#ifdef CONFIG_INTEL_PROXIM
u8 stored_power_mgnt;
#endif
};
#define rtw_get_ips_mode_req(pwrctl) \
(pwrctl)->ips_mode_req
#define rtw_ips_mode_req(pwrctl, ips_mode) \
(pwrctl)->ips_mode_req = (ips_mode)
#define RTW_PWR_STATE_CHK_INTERVAL 2000
#define _rtw_set_pwr_state_check_timer(pwrctl, ms) \
do { \
/*DBG_871X("%s _rtw_set_pwr_state_check_timer(%p, %d)\n", __FUNCTION__, (pwrctl), (ms));*/ \
_set_timer(&(pwrctl)->pwr_state_check_timer, (ms)); \
} while(0)
#define rtw_set_pwr_state_check_timer(pwrctl) \
_rtw_set_pwr_state_check_timer((pwrctl), (pwrctl)->pwr_state_check_interval)
extern void rtw_init_pwrctrl_priv(_adapter *adapter);
extern void rtw_free_pwrctrl_priv(_adapter * adapter);
#ifdef CONFIG_LPS_LCLK
s32 rtw_register_task_alive(PADAPTER, u32 task);
void rtw_unregister_task_alive(PADAPTER, u32 task);
extern s32 rtw_register_tx_alive(PADAPTER padapter);
extern void rtw_unregister_tx_alive(PADAPTER padapter);
extern s32 rtw_register_rx_alive(PADAPTER padapter);
extern void rtw_unregister_rx_alive(PADAPTER padapter);
extern s32 rtw_register_cmd_alive(PADAPTER padapter);
extern void rtw_unregister_cmd_alive(PADAPTER padapter);
extern s32 rtw_register_evt_alive(PADAPTER padapter);
extern void rtw_unregister_evt_alive(PADAPTER padapter);
extern void cpwm_int_hdl(PADAPTER padapter, struct reportpwrstate_parm *preportpwrstate);
extern void LPS_Leave_check(PADAPTER padapter);
#endif
extern void rtw_set_ps_mode(PADAPTER padapter, u8 ps_mode, u8 smart_ps, u8 bcn_ant_mode, const char *msg);
extern void rtw_set_rpwm(_adapter * padapter, u8 val8);
extern void LeaveAllPowerSaveMode(PADAPTER Adapter);
extern void LeaveAllPowerSaveModeDirect(PADAPTER Adapter);
#ifdef CONFIG_IPS
void _ips_enter(_adapter * padapter);
void ips_enter(_adapter * padapter);
int _ips_leave(_adapter * padapter);
int ips_leave(_adapter * padapter);
#endif
void rtw_ps_processor(_adapter*padapter);
#ifdef CONFIG_AUTOSUSPEND
int autoresume_enter(_adapter* padapter);
#endif
#ifdef SUPPORT_HW_RFOFF_DETECTED
rt_rf_power_state RfOnOffDetect(IN PADAPTER pAdapter );
#endif
int rtw_fw_ps_state(PADAPTER padapter);
#ifdef CONFIG_LPS
s32 LPS_RF_ON_check(PADAPTER padapter, u32 delay_ms);
void LPS_Enter(PADAPTER padapter, const char *msg);
void LPS_Leave(PADAPTER padapter, const char *msg);
void traffic_check_for_leave_lps(PADAPTER padapter, u8 tx, u32 tx_packets);
#endif
#ifdef CONFIG_RESUME_IN_WORKQUEUE
void rtw_resume_in_workqueue(struct pwrctrl_priv *pwrpriv);
#endif //CONFIG_RESUME_IN_WORKQUEUE
#if defined(CONFIG_HAS_EARLYSUSPEND ) || defined(CONFIG_ANDROID_POWER)
bool rtw_is_earlysuspend_registered(struct pwrctrl_priv *pwrpriv);
bool rtw_is_do_late_resume(struct pwrctrl_priv *pwrpriv);
void rtw_set_do_late_resume(struct pwrctrl_priv *pwrpriv, bool enable);
void rtw_register_early_suspend(struct pwrctrl_priv *pwrpriv);
void rtw_unregister_early_suspend(struct pwrctrl_priv *pwrpriv);
#else
#define rtw_is_earlysuspend_registered(pwrpriv) _FALSE
#define rtw_is_do_late_resume(pwrpriv) _FALSE
#define rtw_set_do_late_resume(pwrpriv, enable) do {} while (0)
#define rtw_register_early_suspend(pwrpriv) do {} while (0)
#define rtw_unregister_early_suspend(pwrpriv) do {} while (0)
#endif /* CONFIG_HAS_EARLYSUSPEND || CONFIG_ANDROID_POWER */
u8 rtw_interface_ps_func(_adapter *padapter,HAL_INTF_PS_FUNC efunc_id,u8* val);
void rtw_set_ips_deny(_adapter *padapter, u32 ms);
int _rtw_pwr_wakeup(_adapter *padapter, u32 ips_deffer_ms, const char *caller);
#define rtw_pwr_wakeup(adapter) _rtw_pwr_wakeup(adapter, RTW_PWR_STATE_CHK_INTERVAL, __FUNCTION__)
#define rtw_pwr_wakeup_ex(adapter, ips_deffer_ms) _rtw_pwr_wakeup(adapter, ips_deffer_ms, __FUNCTION__)
int rtw_pm_set_ips(_adapter *padapter, u8 mode);
int rtw_pm_set_lps(_adapter *padapter, u8 mode);
void rtw_ps_deny(PADAPTER padapter, PS_DENY_REASON reason);
void rtw_ps_deny_cancel(PADAPTER padapter, PS_DENY_REASON reason);
u32 rtw_ps_deny_get(PADAPTER padapter);
#endif //__RTL871X_PWRCTRL_H_
Reference in New Issue View Git Blame Copy Permalink