Github/rtl8192eu-linux-driver
1
0
Fork 0
mirror of https://github.com/Mange/rtl8192eu-linux-driver synced 2024-11-01 19:25:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
3e0bf8d181
rtl8192eu-linux-driver/hal/rtl8192e/usb/usb_halinit.c
CGarces 3d6c7de21a Updated to 4.4.1
2017-05-11 20:49:39 +02:00

2032 lines
57 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2013 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#define _HCI_HAL_INIT_C_
//#include <drv_types.h>
#include <rtl8192e_hal.h>
#ifndef CONFIG_USB_HCI
#error "CONFIG_USB_HCI shall be on!\n"
#endif
static void _dbg_dump_macreg(_adapter *padapter)
{
u32 offset = 0;
u32 val32 = 0;
u32 index =0 ;
for(index=0;index<64;index++)
{
offset = index*4;
val32 = rtw_read32(padapter,offset);
DBG_8192C("offset : 0x%02x ,val:0x%08x\n",offset,val32);
}
}
static VOID
_ConfigChipOutEP_8192E(
IN PADAPTER pAdapter,
IN u8 NumOutPipe
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
pHalData->OutEpQueueSel = 0;
pHalData->OutEpNumber = 0;
switch(NumOutPipe){
case 4:
pHalData->OutEpQueueSel=TX_SELE_HQ| TX_SELE_LQ|TX_SELE_NQ | TX_SELE_EQ;
pHalData->OutEpNumber=4;
break;
case 3:
pHalData->OutEpQueueSel=TX_SELE_HQ| TX_SELE_LQ|TX_SELE_NQ;
pHalData->OutEpNumber=3;
break;
case 2:
pHalData->OutEpQueueSel=TX_SELE_HQ| TX_SELE_NQ;
pHalData->OutEpNumber=2;
break;
case 1:
pHalData->OutEpQueueSel=TX_SELE_HQ;
pHalData->OutEpNumber=1;
break;
default:
break;
}
DBG_871X("%s OutEpQueueSel(0x%02x), OutEpNumber(%d) \n",__FUNCTION__,pHalData->OutEpQueueSel,pHalData->OutEpNumber );
}
static BOOLEAN HalUsbSetQueuePipeMapping8192EUsb(
IN PADAPTER pAdapter,
IN u8 NumInPipe,
IN u8 NumOutPipe
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
BOOLEAN result = _FALSE;
_ConfigChipOutEP_8192E(pAdapter, NumOutPipe);
// Normal chip with one IN and one OUT doesn't have interrupt IN EP.
if(1 == pHalData->OutEpNumber){
if(1 != NumInPipe){
return result;
}
}
// All config other than above support one Bulk IN and one Interrupt IN.
//if(2 != NumInPipe){
// return result;
//}
result = Hal_MappingOutPipe(pAdapter, NumOutPipe);
return result;
}
void rtl8192eu_interface_configure(_adapter *padapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter);
struct registry_priv *registry_par = &padapter->registrypriv;
if (IS_HIGH_SPEED_USB(padapter))
{
pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;//512 bytes
}
else
{
pHalData->UsbBulkOutSize = USB_FULL_SPEED_BULK_SIZE;//64 bytes
}
pHalData->interfaceIndex = pdvobjpriv->InterfaceNumber;
#ifdef CONFIG_USB_TX_AGGREGATION
pHalData->UsbTxAggMode = 1;
pHalData->UsbTxAggDescNum = 3; // only 4 bits
#endif
#ifdef CONFIG_USB_RX_AGGREGATION
pHalData->UsbRxAggMode = registry_par->usb_rxagg_mode;
if(( pHalData->UsbRxAggMode != USB_RX_AGG_DMA) && ( pHalData->UsbRxAggMode != USB_RX_AGG_USB))
{
pHalData->UsbRxAggMode = USB_RX_AGG_DMA;// USB_RX_AGG_USB, USB_RX_AGG_MIX;
}
//pHalData->UsbRxAggBlockCount = 8; //unit : 512b
//pHalData->UsbRxAggBlockTimeout = 0x6;
//pHalData->UsbRxAggPageCount = 16; //uint :128 b //0x0A; // 10 = MAX_RX_DMA_BUFFER_SIZE/2/pHalData->UsbBulkOutSize
//pHalData->UsbRxAggPageTimeout = 0x6; //6, absolute time = 34ms/(2^6)
if(pHalData->UsbRxAggMode == USB_RX_AGG_DMA)
{
pHalData->RegAcUsbDmaSize = 8;// unit 1k for Rx DMA aggregation mode
pHalData->RegAcUsbDmaTime = 8;//unit 32us
}
else if(pHalData->UsbRxAggMode == USB_RX_AGG_USB)
{
#ifdef CONFIG_PREALLOC_RX_SKB_BUFFER
u32 remainder = 0;
u8 quotient = 0;
remainder = MAX_RECVBUF_SZ % (4*1024);
quotient = (u8)(MAX_RECVBUF_SZ >> 12);
if (quotient > 5) {
pHalData->RegAcUsbDmaSize = 0x5;
pHalData->RegAcUsbDmaTime = 0x20;
} else {
if (remainder >= 2048) {
pHalData->RegAcUsbDmaSize = quotient;
pHalData->RegAcUsbDmaTime = 0x10;
} else {
pHalData->RegAcUsbDmaSize = (quotient-1);
pHalData->RegAcUsbDmaTime = 0x10;
}
}
#elif defined(CONFIG_PLATFORM_HISILICON)
pHalData->RegAcUsbDmaSize = 3; /*unit 4k for USB aggregation mode */
pHalData->RegAcUsbDmaTime = 8; /*unit 32us*/
#else
pHalData->RegAcUsbDmaSize = 6; /* unit 4k for USB aggregation mode */
pHalData->RegAcUsbDmaTime = 0x20; /* unit 32us */
#endif /* CONFIG_PREALLOC_RX_SKB_BUFFER */
}
#endif
HalUsbSetQueuePipeMapping8192EUsb(padapter,
pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes);
}
static VOID
_InitBurstPktLen_8192EU(IN PADAPTER Adapter)
{
#if 0
u1Byte speedvalue, provalue, temp;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
//PlatformEFIOWrite2Byte(Adapter, REG_TRXDMA_CTRL_8195, 0xf5b0);
//PlatformEFIOWrite2Byte(Adapter, REG_TRXDMA_CTRL_8812, 0xf5b4);
PlatformEFIOWrite2Byte(Adapter, REG_RXDMA_STATUS_8192E, 0x7400); //burset lenght=4, set 0x3400 for burset length=2
PlatformEFIOWrite1Byte(Adapter, 0x289,0xf5); //for rxdma control
//PlatformEFIOWrite1Byte(Adapter, 0x3a, 0x46);
// 0x456 = 0x70, sugguested by Zhilin
//PlatformEFIOWrite1Byte(Adapter, REG_AMPDU_MAX_TIME_8192E, 0x70);
//Suggention by SD1 Jong and Pisa, by Maddest 20130107.
PlatformEFIOWrite2Byte(Adapter, REG_MAX_AGGR_NUM_8192E, 0x0e0e);
PlatformEFIOWrite1Byte(Adapter, REG_FWHW_TXQ_CTRL_8192E, 0x80);//EN_AMPDU_RTY_NEW
PlatformEFIOWrite1Byte(Adapter, REG_AMPDU_MAX_TIME_8192E, 0x5e);
PlatformEFIOWrite4Byte(Adapter, REG_FAST_EDCA_CTRL_8192E, 0x03087777);
//PlatformEFIOWrite4Byte(Adapter, 0x458, 0xffffffff);
PlatformEFIOWrite1Byte(Adapter, REG_USTIME_TSF_8192E, 0x50);
PlatformEFIOWrite1Byte(Adapter, REG_USTIME_EDCA_8192E, 0x50);
if(IS_HARDWARE_TYPE_8821U(Adapter) ||IS_HARDWARE_TYPE_8192EU(Adapter))
speedvalue = BIT7;
else
speedvalue = PlatformEFIORead1Byte(Adapter, 0xff); //check device operation speed: SS 0xff bit7
if(speedvalue & BIT7) //USB2/1.1 Mode
{
temp = PlatformEFIORead1Byte(Adapter, REG_USB_INFO);
if(((temp>>4)&0x03)==0)
{
//pHalData->UsbBulkOutSize = 512;
provalue = PlatformEFIORead1Byte(Adapter, REG_RXDMA_PRO_8192E);
PlatformEFIOWrite1Byte(Adapter, REG_RXDMA_PRO_8192E, (provalue|BIT(4)&(~BIT(5)))); //set burst pkt len=512B
PlatformEFIOWrite2Byte(Adapter, REG_RXDMA_PRO_8192E, 0x1e);
}
else
{
//pHalData->UsbBulkOutSize = 64;
provalue = PlatformEFIORead1Byte(Adapter, REG_RXDMA_PRO_8192E);
PlatformEFIOWrite1Byte(Adapter, REG_RXDMA_PRO_8192E, ((provalue|BIT(5))&(~BIT(4)))); //set burst pkt len=64B
}
PlatformEFIOWrite2Byte(Adapter, REG_RXDMA_AGG_PG_TH_8192E,0x2005); //dmc agg th 20K
pHalData->bSupportUSB3 = FALSE;
}
PlatformEFIOWrite1Byte(Adapter, REG_DWBCN0_CTRL_8192E, 0x10);
PlatformEFIOWrite1Byte(Adapter, 0x4c7,PlatformEFIORead1Byte(Adapter, 0x4c7)|BIT(7)); //enable single pkt ampdu
PlatformEFIOWrite1Byte(Adapter, REG_RX_PKT_LIMIT_8192E, 0x18); //for VHT packet length 11K
//PlatformEFIOWrite1Byte(Adapter, REG_MAX_AGGR_NUM_8192E, 0x1f);
PlatformEFIOWrite1Byte(Adapter, REG_PIFS_8192E, 0x00);
//PlatformEFIOWrite1Byte(Adapter, REG_FWHW_TXQ_CTRL_8192E, PlatformEFIORead1Byte(Adapter, REG_FWHW_TXQ_CTRL)&(~BIT(7)));
#ifdef CONFIG_TX_EARLY_MODE
if(pHalData->AMPDUBurstMode)
{
PlatformEFIOWrite1Byte(Adapter,REG_SW_AMPDU_BURST_MODE_CTRL_8192E, 0x5F);
}
#endif
PlatformEFIOWrite1Byte(Adapter, 0x1c, PlatformEFIORead1Byte(Adapter, 0x1c) | BIT(5) |BIT(6)); //to prevent mac is reseted by bus. 20111208, by Page
#endif
}
static u32 _InitPowerOn_8192EU(_adapter *padapter)
{
u16 value16;
u32 value32;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
// HW Power on sequence
u8 bMacPwrCtrlOn=_FALSE;
rtw_hal_get_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
if(bMacPwrCtrlOn == _TRUE)
return _SUCCESS;
DBG_871X("==>%s \n",__FUNCTION__);
value32 = rtw_read32(padapter, REG_SYS_CFG1_8192E);
if(value32 & BIT_SPSLDO_SEL){
//LDO
rtw_write8(padapter, REG_LDO_SWR_CTRL, 0xC3);
}
else {
//SPS
//0x7C [6] = 1<><31>b0 (IC default, 0x83)
/* 0x14[23:20]=b<><62>0101 (raise 1.2V voltage)
u1Byte tmp1Byte = PlatformEFIORead1Byte(Adapter,0x16);
PlatformEFIOWrite1Byte(Adapter,0x16,tmp1Byte |BIT4|BIT6); */
u32 voltage = rtw_read32(padapter , REG_SYS_SWR_CTRL2_8192E);
if (((voltage & 0x00F00000) >> 20) == 0x4) {
voltage = (voltage & 0xFF0FFFFF) | (0x05 << 20);
rtw_write32(padapter , REG_SYS_SWR_CTRL2_8192E , voltage);
}
rtw_write8(padapter, REG_LDO_SWR_CTRL, 0x83);
}
//adjust xtal/afe before enable PLL, suggest by SD1-Scott
Hal_CrystalAFEAdjust(padapter);
if(!HalPwrSeqCmdParsing(padapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, Rtl8192E_NIC_ENABLE_FLOW)){
DBG_871X("%s: HalPwrSeqCmdParsing fail\n", __func__);
return _FAIL;
}
// Enable MAC DMA/WMAC/SCHEDULE/SEC block
// Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31.
rtw_write16(padapter, REG_CR, 0x00); //suggseted by zhouzhou, by page, 20111230
value16 = rtw_read16(padapter, REG_CR);
value16 |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN
| PROTOCOL_EN | SCHEDULE_EN | ENSEC | CALTMR_EN);
rtw_write16(padapter, REG_CR, value16);
bMacPwrCtrlOn = _TRUE;
rtw_hal_set_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
return _SUCCESS;
}
//---------------------------------------------------------------
//
// MAC init functions
//
//---------------------------------------------------------------
// Shall USB interface init this?
static VOID
_InitInterrupt_8192EU(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
/*HISR write one to clear*/
rtw_write32(Adapter, REG_HISR0_8192E, 0xFFFFFFFF);
rtw_write32(Adapter, REG_HISR1_8192E, 0xFFFFFFFF);
// HIMR
rtw_write32(Adapter, REG_HIMR0_8192E, pHalData->IntrMask[0]&0xFFFFFFFF);
rtw_write32(Adapter, REG_HIMR1_8192E, pHalData->IntrMask[1]&0xFFFFFFFF);
}
static VOID
_InitQueueReservedPage_8192EUsb(
IN PADAPTER Adapter
)
{
_InitQueueReservedPage_8192E(Adapter);
}
static VOID
_InitHardwareDropIncorrectBulkOut_8192E(
IN PADAPTER Adapter
)
{
#ifdef ENABLE_USB_DROP_INCORRECT_OUT
u32 value32 = rtw_read32(Adapter, REG_TXDMA_OFFSET_CHK);
value32 |= DROP_DATA_EN;
rtw_write32(Adapter, REG_TXDMA_OFFSET_CHK, value32);
#endif
}
#ifdef CONFIG_LED
static void _InitHWLed(PADAPTER Adapter)
{
struct led_priv *pledpriv = &(Adapter->ledpriv);
if( pledpriv->LedStrategy != HW_LED)
return;
rtw_write8(Adapter,REG_LEDCFG1,0x02);
// HW led control
// to do ....
//must consider cases of antenna diversity/ commbo card/solo card/mini card
}
#endif //CONFIG_LED
static VOID
_init_UsbBusSetting_8192EU(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 usb_bus_setting = 0;
usb_bus_setting = rtw_read8(Adapter,REG_RXDMA_8192E);
usb_bus_setting = usb_bus_setting| BIT_DMA_MODE;
usb_bus_setting = usb_bus_setting|BIT(3)|BIT(2);//Burst number in dma mode,DD suggest 0x11
//IS_SUPER_SPEED_USB(Adapter) //for USB 3.0
if(IS_HIGH_SPEED_USB(Adapter))
{
rtw_write8(Adapter,REG_RXDMA_8192E,((usb_bus_setting|BIT(4))&(~BIT(5))));
}
else if(IS_FULL_SPEED_USB(Adapter))
{
rtw_write8(Adapter,REG_RXDMA_8192E,((usb_bus_setting|BIT(5))&(~BIT(4))));
}
}
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingTxUpdate()
*
* Overview: Seperate TX/RX parameters update independent for TP detection and
* dynamic TX/RX aggreagtion parameters update.
*
* Input: PADAPTER
*
* Output/Return: NONE
*
* Revised History:
* When Who Remark
* 12/10/2010 MHC Seperate to smaller function.
*
*---------------------------------------------------------------------------*/
static VOID
usb_AggSettingTxUpdate_8192EU(
IN PADAPTER Adapter
)
{
#ifdef CONFIG_USB_TX_AGGREGATION
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u32 value32;
if(Adapter->registrypriv.wifi_spec)
pHalData->UsbTxAggMode = _FALSE;
if(pHalData->UsbTxAggMode){
value32 = rtw_read32(Adapter, REG_DWBCN0_CTRL_8192E);
value32 = value32 & ~(BLK_DESC_NUM_MASK << BLK_DESC_NUM_SHIFT);
value32 |= ((pHalData->UsbTxAggDescNum & BLK_DESC_NUM_MASK) << BLK_DESC_NUM_SHIFT);
rtw_write32(Adapter, REG_DWBCN0_CTRL_8192E, value32);
rtw_write8(Adapter, REG_DWBCN1_CTRL_8192E, pHalData->UsbTxAggDescNum<<1);
}
#endif
} // usb_AggSettingTxUpdate
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingRxUpdate()
*
* Overview: Seperate TX/RX parameters update independent for TP detection and
* dynamic TX/RX aggreagtion parameters update.
*
* Input: PADAPTER
*
* Output/Return: NONE
*
* Revised History:
* When Who Remark
* 12/10/2010 MHC Seperate to smaller function.
*
*---------------------------------------------------------------------------*/
static VOID
usb_AggSettingRxUpdate_8192EU(
IN PADAPTER Adapter
)
{
#ifdef CONFIG_USB_RX_AGGREGATION
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 usb_agg_setting;
u32 usb_agg_th;
usb_agg_setting = rtw_read8(Adapter, REG_TRXDMA_CTRL);
rtw_write8(Adapter, REG_TRXDMA_CTRL, usb_agg_setting|RXDMA_AGG_EN);
usb_agg_th = (pHalData->RegAcUsbDmaSize&0x0F) | (pHalData->RegAcUsbDmaTime<<8);
switch(pHalData->UsbRxAggMode)
{
case USB_RX_AGG_DMA:
{
usb_agg_th |= BIT_USB_RXDMA_AGG_EN;
}
break;
case USB_RX_AGG_USB:
case USB_RX_AGG_MIX:
break;
case USB_RX_AGG_DISABLE:
default:
// TODO:
break;
}
rtw_write32(Adapter, REG_RXDMA_AGG_PG_TH, usb_agg_th);
/*2010/12/10 MH Add for USB agg mode dynamic switch.*/
pHalData->UsbRxHighSpeedMode = _FALSE;
#endif
} // usb_AggSettingRxUpdate
static VOID
_init_UsbAggregationSetting_8192EU(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
// Tx aggregation setting
usb_AggSettingTxUpdate_8192EU(Adapter);
// Rx aggregation setting
usb_AggSettingRxUpdate_8192EU(Adapter);
}
/*-----------------------------------------------------------------------------
* Function: USB_AggModeSwitch()
*
* Overview: When RX traffic is more than 40M, we need to adjust some parameters to increase
* RX speed by increasing batch indication size. This will decrease TCP ACK speed, we
* need to monitor the influence of FTP/network share.
* For TX mode, we are still ubder investigation.
*
* Input: PADAPTER
*
* Output: NONE
*
* Return: NONE
*
* Revised History:
* When Who Remark
* 12/10/2010 MHC Create Version 0.
*
*---------------------------------------------------------------------------*/
VOID
USB_AggModeSwitch(
IN PADAPTER Adapter
)
{
#if 0
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
//pHalData->UsbRxHighSpeedMode = FALSE;
// How to measure the RX speed? We assume that when traffic is more than
if (pMgntInfo->bRegAggDMEnable == FALSE)
{
return; // Inf not support.
}
if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == TRUE &&
pHalData->UsbRxHighSpeedMode == FALSE)
{
pHalData->UsbRxHighSpeedMode = TRUE;
RT_TRACE(COMP_INIT, DBG_LOUD, ("UsbAggModeSwitchCheck to HIGH\n"));
}
else if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == FALSE &&
pHalData->UsbRxHighSpeedMode == TRUE)
{
pHalData->UsbRxHighSpeedMode = FALSE;
RT_TRACE(COMP_INIT, DBG_LOUD, ("UsbAggModeSwitchCheck to LOW\n"));
}
else
{
return;
}
#if USB_RX_AGGREGATION_92C
if (pHalData->UsbRxHighSpeedMode == TRUE)
{
// 2010/12/10 MH The parameter is tested by SD1 engineer and SD3 channel emulator.
// USB mode
#if (RT_PLATFORM == PLATFORM_LINUX)
if (pMgntInfo->LinkDetectInfo.bTxBusyTraffic)
{
pHalData->RxAggBlockCount = 16;
pHalData->RxAggBlockTimeout = 7;
}
else
#endif
{
pHalData->RxAggBlockCount = 40;
pHalData->RxAggBlockTimeout = 5;
}
// Mix mode
pHalData->RxAggPageCount = 72;
pHalData->RxAggPageTimeout = 6;
}
else
{
// USB mode
pHalData->RxAggBlockCount = pMgntInfo->RegRxAggBlockCount;
pHalData->RxAggBlockTimeout = pMgntInfo->RegRxAggBlockTimeout;
// Mix mode
pHalData->RxAggPageCount = pMgntInfo->RegRxAggPageCount;
pHalData->RxAggPageTimeout = pMgntInfo->RegRxAggPageTimeout;
}
if (pHalData->RxAggBlockCount > MAX_RX_AGG_BLKCNT)
pHalData->RxAggBlockCount = MAX_RX_AGG_BLKCNT;
#if (OS_WIN_FROM_VISTA(OS_VERSION)) || (RT_PLATFORM == PLATFORM_LINUX) // do not support WINXP to prevent usbehci.sys BSOD
if (IS_WIRELESS_MODE_N_24G(Adapter) || IS_WIRELESS_MODE_N_5G(Adapter))
{
//
// 2010/12/24 MH According to V1012 QC IOT test, XP BSOD happen when running chariot test
// with the aggregation dynamic change!! We need to disable the function to prevent it is broken
// in usbehci.sys.
//
usb_AggSettingRxUpdate_8188E(Adapter);
// 2010/12/27 MH According to designer's suggstion, we can only modify Timeout value. Otheriwse
// there might many HW incorrect behavior, the XP BSOD at usbehci.sys may be relative to the
// issue. Base on the newest test, we can not enable block cnt > 30, otherwise XP usbehci.sys may
// BSOD.
}
#endif
#endif
#endif
} // USB_AggModeSwitch
static VOID _RfPowerSave(
IN PADAPTER Adapter
)
{
#if 0
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
u1Byte eRFPath;
#if (DISABLE_BB_RF)
return;
#endif
if(pMgntInfo->RegRfOff == TRUE){ // User disable RF via registry.
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): Turn off RF for RegRfOff.\n"));
MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
// Those action will be discard in MgntActSet_RF_State because off the same state
for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter, eRFPath, 0x4, 0xC00, 0x0);
}
else if(pMgntInfo->RfOffReason > RF_CHANGE_BY_PS){ // H/W or S/W RF OFF before sleep.
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): Turn off RF for RfOffReason(%ld).\n", pMgntInfo->RfOffReason));
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
}
else{
pHalData->eRFPowerState = eRfOn;
pMgntInfo->RfOffReason = 0;
if(Adapter->bInSetPower || Adapter->bResetInProgress)
PlatformUsbEnableInPipes(Adapter);
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): RF is on.\n"));
}
#endif
}
enum {
Antenna_Lfet = 1,
Antenna_Right = 2,
};
//
// 2010/08/26 MH Add for selective suspend mode check.
// If Efuse 0x0e bit1 is not enabled, we can not support selective suspend for Minicard and
// slim card.
//
static VOID
HalDetectSelectiveSuspendMode(
IN PADAPTER Adapter
)
{
#if 0
u8 tmpvalue;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(Adapter);
// If support HW radio detect, we need to enable WOL ability, otherwise, we
// can not use FW to notify host the power state switch.
EFUSE_ShadowRead(Adapter, 1, EEPROM_USB_OPTIONAL1, (u32 *)&tmpvalue);
DBG_8192C("HalDetectSelectiveSuspendMode(): SS ");
if(tmpvalue & BIT1)
{
DBG_8192C("Enable\n");
}
else
{
DBG_8192C("Disable\n");
pdvobjpriv->RegUsbSS = _FALSE;
}
// 2010/09/01 MH According to Dongle Selective Suspend INF. We can switch SS mode.
if (pdvobjpriv->RegUsbSS && !SUPPORT_HW_RADIO_DETECT(pHalData))
{
//PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
//if (!pMgntInfo->bRegDongleSS)
//{
// RT_TRACE(COMP_INIT, DBG_LOUD, ("Dongle disable SS\n"));
pdvobjpriv->RegUsbSS = _FALSE;
//}
}
#endif
} // HalDetectSelectiveSuspendMode
#if 0
/*-----------------------------------------------------------------------------
* Function: HwSuspendModeEnable92Cu()
*
* Overview: HW suspend mode switch.
*
* Input: NONE
*
* Output: NONE
*
* Return: NONE
*
* Revised History:
* When Who Remark
* 08/23/2010 MHC HW suspend mode switch test..
*---------------------------------------------------------------------------*/
static VOID
HwSuspendModeEnable_8192EU(
IN PADAPTER pAdapter,
IN u8 Type
)
{
//PRT_USB_DEVICE pDevice = GET_RT_USB_DEVICE(pAdapter);
u16 reg = rtw_read16(pAdapter, REG_GPIO_MUXCFG);
//if (!pDevice->RegUsbSS)
{
return;
}
//
// 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW
// to enter suspend mode automatically. Otherwise, it will shut down major power
// domain and 8051 will stop. When we try to enter selective suspend mode, we
// need to prevent HW to enter D2 mode aumotmatically. Another way, Host will
// issue a S10 signal to power domain. Then it will cleat SIC setting(from Yngli).
// We need to enable HW suspend mode when enter S3/S4 or disable. We need
// to disable HW suspend mode for IPS/radio_off.
//
//RT_TRACE(COMP_RF, DBG_LOUD, ("HwSuspendModeEnable92Cu = %d\n", Type));
if (Type == _FALSE)
{
reg |= BIT14;
//RT_TRACE(COMP_RF, DBG_LOUD, ("REG_GPIO_MUXCFG = %x\n", reg));
rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg);
reg |= BIT12;
//RT_TRACE(COMP_RF, DBG_LOUD, ("REG_GPIO_MUXCFG = %x\n", reg));
rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg);
}
else
{
reg &= (~BIT12);
rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg);
reg &= (~BIT14);
rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg);
}
} // HwSuspendModeEnable92Cu
#endif
rt_rf_power_state RfOnOffDetect(IN PADAPTER pAdapter )
{
struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(pAdapter);
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
u8 val8;
rt_rf_power_state rfpowerstate = rf_off;
if(pwrctl->bHWPowerdown)
{
val8 = rtw_read8(pAdapter, REG_HSISR);
DBG_8192C("pwrdown, 0x5c(BIT7)=%02x\n", val8);
rfpowerstate = (val8 & BIT7) ? rf_off: rf_on;
}
else // rf on/off
{
rtw_write8( pAdapter, REG_MAC_PINMUX_CFG,rtw_read8(pAdapter, REG_MAC_PINMUX_CFG)&~(BIT3));
val8 = rtw_read8(pAdapter, REG_GPIO_IO_SEL);
DBG_8192C("GPIO_IN=%02x\n", val8);
rfpowerstate = (val8 & BIT3) ? rf_on : rf_off;
}
return rfpowerstate;
} // HalDetectPwrDownMode
void _ps_open_RF(_adapter *padapter) {
//here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified
//phy_SsPwrSwitch92CU(padapter, rf_on, 1);
}
void _ps_close_RF(_adapter *padapter){
//here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified
//phy_SsPwrSwitch92CU(padapter, rf_off, 1);
}
//page added for usb2 phy reg access. 20120514
VOID WriteUSB2PHYReg_8192EU(PADAPTER Adapter, u8 Offset, u8 Value)
{
Offset -= 0x20;
rtw_write8(Adapter, 0xFE41, Value);
rtw_write8(Adapter, 0xFE40, Offset);
rtw_write8(Adapter, 0xFE42, 0x81);
}
u1Byte ReadUSB2PHYReg_8192EU(PADAPTER Adapter, u8 Offset)
{
u8 value;
rtw_write8(Adapter, 0xFE40, Offset);
rtw_write8(Adapter, 0xFE42, 0x81);
value = rtw_read8(Adapter, 0xFE43);
return value;
}
u32 rtl8192eu_hal_init(PADAPTER Adapter)
{
u8 value8 = 0;
u16 value16;
u8 txpktbuf_bndy;
u32 status = _SUCCESS;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct pwrctrl_priv *pwrctrlpriv = adapter_to_pwrctl(Adapter);
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
rt_rf_power_state eRfPowerStateToSet;
u32 init_start_time = rtw_get_current_time();
#ifdef DBG_HAL_INIT_PROFILING
enum HAL_INIT_STAGES {
HAL_INIT_STAGES_BEGIN = 0,
HAL_INIT_STAGES_INIT_PW_ON,
HAL_INIT_STAGES_MISC01,
HAL_INIT_STAGES_DOWNLOAD_FW,
HAL_INIT_STAGES_MAC,
HAL_INIT_STAGES_BB,
HAL_INIT_STAGES_RF,
HAL_INIT_STAGES_EFUSE_PATCH,
HAL_INIT_STAGES_INIT_LLTT,
HAL_INIT_STAGES_MISC02,
HAL_INIT_STAGES_TURN_ON_BLOCK,
HAL_INIT_STAGES_INIT_SECURITY,
HAL_INIT_STAGES_MISC11,
HAL_INIT_STAGES_INIT_HAL_DM,
//HAL_INIT_STAGES_RF_PS,
HAL_INIT_STAGES_IQK,
HAL_INIT_STAGES_PW_TRACK,
HAL_INIT_STAGES_LCK,
HAL_INIT_STAGES_MISC21,
//HAL_INIT_STAGES_INIT_PABIAS,
#ifdef CONFIG_BT_COEXIST
HAL_INIT_STAGES_BT_COEXIST,
#endif
//HAL_INIT_STAGES_ANTENNA_SEL,
HAL_INIT_STAGES_MISC31,
HAL_INIT_STAGES_END,
HAL_INIT_STAGES_NUM
};
char * hal_init_stages_str[] = {
"HAL_INIT_STAGES_BEGIN",
"HAL_INIT_STAGES_INIT_PW_ON",
"HAL_INIT_STAGES_MISC01",
"HAL_INIT_STAGES_DOWNLOAD_FW",
"HAL_INIT_STAGES_MAC",
"HAL_INIT_STAGES_BB",
"HAL_INIT_STAGES_RF",
"HAL_INIT_STAGES_EFUSE_PATCH",
"HAL_INIT_STAGES_INIT_LLTT",
"HAL_INIT_STAGES_MISC02",
"HAL_INIT_STAGES_TURN_ON_BLOCK",
"HAL_INIT_STAGES_INIT_SECURITY",
"HAL_INIT_STAGES_MISC11",
"HAL_INIT_STAGES_INIT_HAL_DM",
//"HAL_INIT_STAGES_RF_PS",
"HAL_INIT_STAGES_IQK",
"HAL_INIT_STAGES_PW_TRACK",
"HAL_INIT_STAGES_LCK",
"HAL_INIT_STAGES_MISC21",
#ifdef CONFIG_BT_COEXIST
"HAL_INIT_STAGES_BT_COEXIST",
#endif
//"HAL_INIT_STAGES_ANTENNA_SEL",
"HAL_INIT_STAGES_MISC31",
"HAL_INIT_STAGES_END",
};
int hal_init_profiling_i;
u32 hal_init_stages_timestamp[HAL_INIT_STAGES_NUM]; //used to record the time of each stage's starting point
for(hal_init_profiling_i=0;hal_init_profiling_i<HAL_INIT_STAGES_NUM;hal_init_profiling_i++)
hal_init_stages_timestamp[hal_init_profiling_i]=0;
#define HAL_INIT_PROFILE_TAG(stage) hal_init_stages_timestamp[(stage)]=rtw_get_current_time();
#else
#define HAL_INIT_PROFILE_TAG(stage) do {} while(0)
#endif //DBG_HAL_INIT_PROFILING
_func_enter_;
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BEGIN);
/*
if(0)
{
WriteUSB2PHYReg_8192EU(Adapter, 0xE1, ReadUSB2PHYReg_8192EU(Adapter, 0xE1)&0x7f);
WriteUSB2PHYReg_8192EU(Adapter, 0xE2, ReadUSB2PHYReg_8192EU(Adapter, 0xE2)&0x0f);
delay_us(50);
WriteUSB2PHYReg_8192EU(Adapter, 0xE1, ReadUSB2PHYReg_8192EU(Adapter, 0xE1)|0x80);
WriteUSB2PHYReg_8192EU(Adapter, 0xE2, ReadUSB2PHYReg_8192EU(Adapter, 0xE1)|0x90);
}
*/
#ifdef CONFIG_WOWLAN
pwrctrlpriv->wowlan_wake_reason = rtw_read8(Adapter, REG_WOWLAN_WAKE_REASON);
DBG_8192C("%s wowlan_wake_reason: 0x%02x\n",
__func__, pwrctrlpriv->wowlan_wake_reason);
if(rtw_read8(Adapter, REG_MCUFWDL)&BIT7){ /*&&
(pwrctrlpriv->wowlan_wake_reason & FWDecisionDisconnect)) {*/
u8 reg_val=0;
DBG_8192C("+Reset Entry+\n");
rtw_write8(Adapter, REG_MCUFWDL, 0x00);
_8051Reset8192E(Adapter);
//reset BB
reg_val = rtw_read8(Adapter, REG_SYS_FUNC_EN);
reg_val &= ~(BIT(0) | BIT(1));
rtw_write8(Adapter, REG_SYS_FUNC_EN, reg_val);
//reset RF
rtw_write8(Adapter, REG_RF_CTRL, 0);
//reset TRX path
rtw_write16(Adapter, REG_CR, 0);
//reset MAC, Digital Core
reg_val = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
reg_val &= ~(BIT(4) | BIT(7));
rtw_write8(Adapter, REG_SYS_FUNC_EN+1, reg_val);
reg_val = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
reg_val |= BIT(4) | BIT(7);
rtw_write8(Adapter, REG_SYS_FUNC_EN+1, reg_val);
DBG_8192C("-Reset Entry-\n");
}
#endif //CONFIG_WOWLAN
if(pwrctrlpriv->bkeepfwalive)
{
_ps_open_RF(Adapter);
if(pHalData->bIQKInitialized){
// PHY_IQCalibrate(padapter, _TRUE);
}
else
{
// PHY_IQCalibrate(padapter, _FALSE);
pHalData->bIQKInitialized = _TRUE;
}
// dm_CheckTXPowerTracking(padapter);
// PHY_LCCalibrate(padapter);
ODM_TXPowerTrackingCheck(&pHalData->odmpriv );
//PHY_LCCalibrate_8188E(Adapter);
goto exit;
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON);
status = rtw_hal_power_on(Adapter);
if(status == _FAIL){
RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init power on!\n"));
goto exit;
}
txpktbuf_bndy = TX_PAGE_BOUNDARY_8192E;
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC01);
_InitQueueReservedPage_8192EUsb(Adapter);
_InitQueuePriority_8192E(Adapter);
_InitPageBoundary_8192E(Adapter);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_DOWNLOAD_FW);
if (Adapter->registrypriv.mp_mode == 0) {
status = FirmwareDownload8192E(Adapter, _FALSE);
if (status != _SUCCESS) {
DBG_871X("%s: Download Firmware failed!!\n", __FUNCTION__);
Adapter->bFWReady = _FALSE;
pHalData->fw_ractrl = _FALSE;
return status;
} else {
RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("Initializepadapter8192CSdio(): Download Firmware Success!!\n"));
Adapter->bFWReady = _TRUE;
pHalData->fw_ractrl = _TRUE;
}
}
if(pwrctrlpriv->reg_rfoff == _TRUE){
pwrctrlpriv->rf_pwrstate = rf_off;
}
// Save target channel
pHalData->CurrentChannel = 6;//default set to 6
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MAC);
#if (HAL_MAC_ENABLE == 1)
status = PHY_MACConfig8192E(Adapter);
if(status == _FAIL)
{
goto exit;
}
#endif
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BB);
#if (HAL_BB_ENABLE == 1)
status = PHY_BBConfig8192E(Adapter);
if(status == _FAIL)
{
goto exit;
}
#endif
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_RF);
#if (HAL_RF_ENABLE == 1)
status = PHY_RFConfig8192E(Adapter);
if(status == _FAIL)
{
goto exit;
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_EFUSE_PATCH);
_InitTxBufferBoundary_8192E(Adapter, txpktbuf_bndy);
status = InitLLTTable8192E(Adapter, txpktbuf_bndy);
if(status == _FAIL){
RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init LLT table\n"));
goto exit;
}
_InitHardwareDropIncorrectBulkOut_8192E(Adapter);
if(pHalData->bRDGEnable){
_InitRDGSetting_8192E(Adapter);
}
#ifdef CONFIG_TX_EARLY_MODE
if(pHalData->AMPDUBurstMode)
{
RT_TRACE(_module_hci_hal_init_c_, _drv_info_,("EarlyMode Enabled!!!\n"));
value8 = rtw_read8(Adapter, REG_EARLY_MODE_CONTROL_8192E);
#if RTL8192E_EARLY_MODE_PKT_NUM_10 == 1
value8 = value8|0x1f;
#else
value8 = value8|0xf;
#endif
rtw_write8(Adapter, REG_EARLY_MODE_CONTROL_8192E, value8);
rtw_write8(Adapter, REG_EARLY_MODE_CONTROL_8192E+3, 0x80);
value8 = rtw_read8(Adapter, REG_TCR+1);
value8 = value8|0x40;
rtw_write8(Adapter,REG_TCR+1, value8);
}
else
{
//rtw_write8(Adapter, REG_EARLY_MODE_CONTROL, 0);
}
#endif //CONFIG_TX_EARLY_MODE
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02);
// Get Rx PHY status in order to report RSSI and others.
_InitDriverInfoSize_8192E(Adapter, DRVINFO_SZ);
_InitInterrupt_8192EU(Adapter);
_InitID_8192E(Adapter);//set mac_address
_InitNetworkType_8192E(Adapter);//set msr
_InitWMACSetting_8192E(Adapter);
_InitAdaptiveCtrl_8192E(Adapter);
_InitRateFallback_8192E(Adapter);
_InitEDCA_8192E(Adapter);
_InitRetryFunction_8192E(Adapter);
_init_UsbBusSetting_8192EU(Adapter);
_init_UsbAggregationSetting_8192EU(Adapter);
_InitBeaconParameters_8192E(Adapter);
_InitBeaconMaxError_8192E(Adapter, _TRUE);
_InitBurstPktLen_8192EU(Adapter); //added by page. 20110919
//
// Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch
// Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E.
// 2011.08.05. by tynli.
//
value8 = rtw_read8(Adapter, REG_CR);
rtw_write8(Adapter, REG_CR, (value8|MACTXEN|MACRXEN));
#ifdef CONFIG_CHECK_AC_LIFETIME
// Enable lifetime check for the four ACs
rtw_write8(Adapter, REG_LIFETIME_CTRL, 0x0F);
#endif // CONFIG_CHECK_AC_LIFETIME
#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_TX_MCAST2UNI)
#ifdef CONFIG_TX_MCAST2UNI
rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400); // unit: 256us. 256ms
rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400); // unit: 256us. 256ms
#else // CONFIG_TX_MCAST2UNI
rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x3000); // unit: 256us. 3s
rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x3000); // unit: 256us. 3s
#endif // CONFIG_TX_MCAST2UNI
#endif // CONFIG_CONCURRENT_MODE || CONFIG_TX_MCAST2UNI
#ifdef CONFIG_LED
_InitHWLed(Adapter);
#endif //CONFIG_LED
_BBTurnOnBlock_8192E(Adapter);
#endif
//
// Joseph Note: Keep RfRegChnlVal for later use.
//
pHalData->RfRegChnlVal[0] = PHY_QueryRFReg(Adapter, 0, RF_CHNLBW, bRFRegOffsetMask);
pHalData->RfRegChnlVal[1] = PHY_QueryRFReg(Adapter, 1, RF_CHNLBW, bRFRegOffsetMask);
rtw_hal_set_chnl_bw(Adapter, Adapter->registrypriv.channel,
CHANNEL_WIDTH_20, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HAL_PRIME_CHNL_OFFSET_DONT_CARE);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_TURN_ON_BLOCK);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_SECURITY);
invalidate_cam_all(Adapter);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11);
// HW SEQ CTRL
//set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM.
rtw_write8(Adapter,REG_HWSEQ_CTRL, 0xFF);
//
// Disable BAR, suggested by Scott
// 2010.04.09 add by hpfan
//
rtw_write32(Adapter, REG_BAR_MODE_CTRL, 0x0201ffff);
PHY_SetRFEReg_8192E(Adapter);
if(pregistrypriv->wifi_spec){
rtw_write16(Adapter,REG_FAST_EDCA_CTRL ,0);
//Nav limit , suggest by SD1-Pisa,disable NAV_UPPER function when wifi_spec=1 for Test item: 5.2.3
rtw_write8(Adapter, REG_NAV_UPPER, 0x0);
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM);
rtl8192e_InitHalDm(Adapter);
#if (MP_DRIVER == 1)
if (Adapter->registrypriv.mp_mode == 1)
{
Adapter->mppriv.channel = pHalData->CurrentChannel;
MPT_InitializeAdapter(Adapter, Adapter->mppriv.channel);
}
else
#endif //#if (MP_DRIVER == 1)
{
//
// 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status
// and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not
// call init_adapter. May cause some problem??
//
// Fix the bug that Hw/Sw radio off before S3/S4, the RF off action will not be executed
// in MgntActSet_RF_State() after wake up, because the value of pHalData->eRFPowerState
// is the same as eRfOff, we should change it to eRfOn after we config RF parameters.
// Added by tynli. 2010.03.30.
pwrctrlpriv->rf_pwrstate = rf_on;
//0x4c6[3] 1: RTS BW = Data BW
//0: RTS BW depends on CCA / secondary CCA result.
rtw_write8(Adapter, REG_QUEUE_CTRL, rtw_read8(Adapter, REG_QUEUE_CTRL)&0xF7);
// enable Tx report.
//rtw_write8(Adapter, REG_FWHW_TXQ_CTRL+1, 0x0F);
// Suggested by SD1 pisa. Added by tynli. 2011.10.21.
//rtw_write8(Adapter, REG_EARLY_MODE_CONTROL_8192E+3, 0x01);//Pretx_en, for WEP/TKIP SEC
//tynli_test_tx_report.
//rtw_write16(Adapter, REG_TX_RPT_TIME, 0x3DF0);
// Reset USB mode switch setting
rtw_write8(Adapter, REG_ACLK_MON, 0x0);
//RT_TRACE(COMP_INIT, DBG_TRACE, ("InitializeAdapter8188EUsb() <====\n"));
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_IQK);
if(pwrctrlpriv->rf_pwrstate == rf_on)
{
pHalData->bNeedIQK = _TRUE;
if(pHalData->bIQKInitialized){
PHY_IQCalibrate_8192E(Adapter,_TRUE);
}
else
{
PHY_IQCalibrate_8192E(Adapter,_FALSE);
pHalData->bIQKInitialized = _TRUE;
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_PW_TRACK);
ODM_TXPowerTrackingCheck(&pHalData->odmpriv );
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK);
//PHY_LCCalibrate_8192E((GET_HAL_DATA(Adapter)->odmpriv));
}
}
#ifdef CONFIG_HIGH_CHAN_SUPER_CALIBRATION
rtw_hal_set_chnl_bw(Adapter, 13,
CHANNEL_WIDTH_20, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HAL_PRIME_CHNL_OFFSET_DONT_CARE);
PHY_SpurCalibration_8192E(Adapter);
rtw_hal_set_chnl_bw(Adapter, Adapter->registrypriv.channel,
CHANNEL_WIDTH_20, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HAL_PRIME_CHNL_OFFSET_DONT_CARE);
#endif
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC21);
//HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS);
// _InitPABias(Adapter);
#ifdef CONFIG_BT_COEXIST
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BT_COEXIST);
if (pHalData->EEPROMBluetoothCoexist == 1) {
/* YiWei 20140624 , Fix 8192eu mailbox BT info no response issue reduce I2C clock rate to 156KHz (default 1.25Mhz) */
rtw_write8(Adapter, rPMAC_TxPacketNum, rtw_read8(Adapter, rPMAC_TxPacketNum)|0x7);
/* Init BT hw config.*/
rtw_btcoex_HAL_Initialize(Adapter, _FALSE);
}
/*else
{
// In combo card run wifi only , must setting some hardware reg.
rtl8192e_combo_card_WifiOnlyHwInit(Adapter);
}*/
#endif
// 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW enter
// suspend mode automatically.
//HwSuspendModeEnable92Cu(Adapter, _FALSE);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC31);
rtw_write8(Adapter, REG_USB_HRPWM, 0);
#ifdef CONFIG_XMIT_ACK
//ack for xmit mgmt frames.
rtw_write32(Adapter, REG_FWHW_TXQ_CTRL, rtw_read32(Adapter, REG_FWHW_TXQ_CTRL)|BIT(12));
#endif //CONFIG_XMIT_ACK
//Fixed LDPC rx hang issue.
{
u4Byte tmp4Byte = PlatformEFIORead4Byte(Adapter, REG_SYS_SWR_CTRL1_8192E);
PlatformEFIOWrite1Byte(Adapter,REG_SYS_SWR_CTRL2_8192E,0x75);
tmp4Byte= (tmp4Byte & 0xfff00fff)|(0x7E<<12);
PlatformEFIOWrite4Byte(Adapter,REG_SYS_SWR_CTRL1_8192E,tmp4Byte );
}
//misc
{
int i;
u8 mac_addr[6];
for(i=0; i<6; i++)
{
#ifdef CONFIG_CONCURRENT_MODE
if(Adapter->iface_type == IFACE_PORT1)
mac_addr[i] = rtw_read8(Adapter, REG_MACID1+i);
else
#endif
mac_addr[i] = rtw_read8(Adapter, REG_MACID+i);
}
DBG_8192C(ADPT_FMT" MAC Address from REG_MACID = "MAC_FMT"\n", ADPT_ARG(Adapter),MAC_ARG(mac_addr));
}
exit:
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END);
DBG_871X("%s in %dms\n", __FUNCTION__, rtw_get_passing_time_ms(init_start_time));
#ifdef DBG_HAL_INIT_PROFILING
hal_init_stages_timestamp[HAL_INIT_STAGES_END]=rtw_get_current_time();
for(hal_init_profiling_i=0;hal_init_profiling_i<HAL_INIT_STAGES_NUM-1;hal_init_profiling_i++) {
DBG_871X("DBG_HAL_INIT_PROFILING: %35s, %u, %5u, %5u\n"
, hal_init_stages_str[hal_init_profiling_i]
, hal_init_stages_timestamp[hal_init_profiling_i]
, (hal_init_stages_timestamp[hal_init_profiling_i+1]-hal_init_stages_timestamp[hal_init_profiling_i])
, rtw_get_time_interval_ms(hal_init_stages_timestamp[hal_init_profiling_i], hal_init_stages_timestamp[hal_init_profiling_i+1])
);
}
#endif
_func_exit_;
return status;
}
VOID
hal_poweroff_8192eu(
IN PADAPTER Adapter
)
{
u8 u1bTmp;
u8 bMacPwrCtrlOn = _FALSE;
rtw_hal_get_hwreg(Adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
if(bMacPwrCtrlOn == _FALSE)
return ;
DBG_871X(" %s\n",__FUNCTION__);
//Stop Tx Report Timer. 0x4EC[Bit1]=b'0
u1bTmp = rtw_read8(Adapter, REG_TX_RPT_CTRL);
rtw_write8(Adapter, REG_TX_RPT_CTRL, u1bTmp&(~BIT1));
// stop rx
rtw_write8(Adapter, REG_CR, 0x0);
HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8192E_NIC_LPS_ENTER_FLOW);
// MCUFWDL 0x80[1:0]=0 // reset MCU ready status
rtw_write8(Adapter, REG_MCUFWDL, 0x00);
#if 0
if((rtw_read8(Adapter, REG_MCUFWDL)&RAM_DL_SEL) &&
Adapter->bFWReady) //8051 RAM code
{
_8051Reset8192E(Adapter);
}
#else
// Reset MCU IO Wrapper
u1bTmp = rtw_read8(Adapter, REG_RSV_CTRL+1);
rtw_write8(Adapter,REG_RSV_CTRL+1, (u1bTmp&(~BIT0)));
// Reset MCU. Suggested by Filen. 2011.01.26. by tynli.
u1bTmp = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
rtw_write8(Adapter, REG_SYS_FUNC_EN+1, (u1bTmp&(~BIT2)));
// Enable MCU IO Wrapper , for IPS flow
u1bTmp = rtw_read8(Adapter, REG_RSV_CTRL+1);
rtw_write8(Adapter, REG_RSV_CTRL+1, u1bTmp|BIT0);
#endif
// Card disable power action flow
HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8192E_NIC_DISABLE_FLOW);
bMacPwrCtrlOn = _FALSE;
rtw_hal_set_hwreg(Adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
Adapter->bFWReady = _FALSE;
}
static void rtl8192e_hw_power_down(_adapter *padapter)
{
// 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c.
// Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1.
// Enable register area 0x0-0xc.
rtw_write8(padapter,REG_RSV_CTRL, 0x0);
rtw_write16(padapter, REG_APS_FSMCO, 0x8812);
}
u32 rtl8192eu_hal_deinit(PADAPTER Adapter)
{
struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(Adapter);
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
DBG_8192C("==> %s \n",__FUNCTION__);
rtw_write16(Adapter, REG_GPIO_MUXCFG, rtw_read16(Adapter, REG_GPIO_MUXCFG)&(~BIT12));
if(pHalData->bSupportUSB3 == _TRUE)
{
// set Reg 0xf008[3:4] to 2'11 to eable U1/U2 Mode in USB3.0. added by page, 20120712
rtw_write8(Adapter, 0xf008, rtw_read8(Adapter, 0xf008)|0x18);
}
rtw_write32(Adapter, REG_HISR0_8192E, 0xFFFFFFFF);
rtw_write32(Adapter, REG_HISR1_8192E, 0xFFFFFFFF);
rtw_write32(Adapter, REG_HIMR0_8192E, IMR_DISABLED_8192E);
rtw_write32(Adapter, REG_HIMR1_8192E, IMR_DISABLED_8192E);
#ifdef SUPPORT_HW_RFOFF_DETECTED
DBG_8192C("bkeepfwalive(%x)\n", pwrctl->bkeepfwalive);
if(pwrctl->bkeepfwalive)
{
_ps_close_RF(Adapter);
if((pwrctl->bHWPwrPindetect) && (pwrctl->bHWPowerdown))
rtl8192e_hw_power_down(Adapter);
}
else
#endif
{
if (rtw_is_hw_init_completed(Adapter)) {
rtw_hal_power_off(Adapter);
if((pwrctl->bHWPwrPindetect ) && (pwrctl->bHWPowerdown))
rtl8192e_hw_power_down(Adapter);
}
pHalData->bMacPwrCtrlOn = _FALSE;
}
return _SUCCESS;
}
unsigned int rtl8192eu_inirp_init(PADAPTER Adapter)
{
u8 i;
struct recv_buf *precvbuf;
uint status;
struct dvobj_priv *pdev= adapter_to_dvobj(Adapter);
struct intf_hdl * pintfhdl=&Adapter->iopriv.intf;
struct recv_priv *precvpriv = &(Adapter->recvpriv);
u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u32 (*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr);
#endif
_func_enter_;
_read_port = pintfhdl->io_ops._read_port;
status = _SUCCESS;
RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("===> usb_inirp_init \n"));
precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR;
//issue Rx irp to receive data
precvbuf = (struct recv_buf *)precvpriv->precv_buf;
for(i=0; i<NR_RECVBUFF; i++)
{
if(_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == _FALSE )
{
RT_TRACE(_module_hci_hal_init_c_,_drv_err_,("usb_rx_init: usb_read_port error \n"));
status = _FAIL;
goto exit;
}
precvbuf++;
precvpriv->free_recv_buf_queue_cnt--;
}
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
if (pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX] != 0x07) {
status = _FAIL;
DBG_871X("%s =>Warning !! Have not USB Int-IN pipe, RtIntInPipe(%d)!!!\n", __func__, pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX]);
goto exit;
}
_read_interrupt = pintfhdl->io_ops._read_interrupt;
if(_read_interrupt(pintfhdl, RECV_INT_IN_ADDR) == _FALSE )
{
RT_TRACE(_module_hci_hal_init_c_,_drv_err_,("usb_rx_init: usb_read_interrupt error \n"));
status = _FAIL;
}
#endif
exit:
RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("<=== usb_inirp_init \n"));
_func_exit_;
return status;
}
unsigned int rtl8192eu_inirp_deinit(PADAPTER Adapter)
{
RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("\n ===> usb_rx_deinit \n"));
rtw_read_port_cancel(Adapter);
RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("\n <=== usb_rx_deinit \n"));
return _SUCCESS;
}
//-------------------------------------------------------------------
//
// EEPROM/EFUSE Content Parsing
//
//-------------------------------------------------------------------
VOID
hal_ReadIDs_8192EU(
IN PADAPTER Adapter,
IN pu1Byte PROMContent,
IN BOOLEAN AutoloadFail
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
if( !AutoloadFail )
{
// VID, PID
pHalData->EEPROMVID = ReadLE2Byte(&PROMContent[EEPROM_VID_8192EU]);
pHalData->EEPROMPID = ReadLE2Byte(&PROMContent[EEPROM_PID_8192EU]);
// Customer ID, 0x00 and 0xff are reserved for Realtek.
pHalData->EEPROMCustomerID = *(u8 *)&PROMContent[EEPROM_CustomID_8192E];
pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID;
}
else
{
pHalData->EEPROMVID = EEPROM_Default_VID;
pHalData->EEPROMPID = EEPROM_Default_PID;
// Customer ID, 0x00 and 0xff are reserved for Realtek.
pHalData->EEPROMCustomerID = EEPROM_Default_CustomerID;
pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID;
}
if((pHalData->EEPROMVID == 0x050D) && (pHalData->EEPROMPID == 0x1106))// SerComm for Belkin.
pHalData->CustomerID = RT_CID_819x_Sercomm_Belkin;
else if((pHalData->EEPROMVID == 0x0846) && (pHalData->EEPROMPID == 0x9051))// SerComm for Netgear.
pHalData->CustomerID = RT_CID_819x_Sercomm_Netgear;
else if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330e))//add by ylb 20121012 for customer led for alpha
pHalData->CustomerID = RT_CID_819x_ALPHA_Dlink;
DBG_871X("VID = 0x%04X, PID = 0x%04X\n", pHalData->EEPROMVID, pHalData->EEPROMPID);
DBG_871X("Customer ID: 0x%02X, SubCustomer ID: 0x%02X\n", pHalData->EEPROMCustomerID, pHalData->EEPROMSubCustomerID);
}
VOID
hal_CustomizedBehavior_8192EU(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct led_priv *pledpriv = &(Adapter->ledpriv);
// Led mode
switch(pHalData->CustomerID)
{
case RT_CID_DEFAULT:
pledpriv->LedStrategy = SW_LED_MODE1;
pledpriv->bRegUseLed = _TRUE;
break;
case RT_CID_819x_HP:
pledpriv->LedStrategy = SW_LED_MODE6; // Customize Led mode
break;
case RT_CID_819x_Sercomm_Belkin:
pledpriv->LedStrategy = SW_LED_MODE9;
break;
case RT_CID_819x_Sercomm_Netgear:
pledpriv->LedStrategy = SW_LED_MODE10;
break;
case RT_CID_819x_ALPHA_Dlink://add by ylb 20121012 for customer led for alpha
pledpriv->LedStrategy = SW_LED_MODE1;
break;
default:
pledpriv->LedStrategy = SW_LED_MODE9;
break;
}
// 2010.04.28 for 88CU minicard led control
//if(pHalData->InterfaceSel == INTF_SEL2_MINICARD)
//{
// pHalData->LedStrategy = SW_LED_MODE6;
//}
pHalData->bLedOpenDrain = _TRUE;// Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16.
}
static void
hal_CustomizeByCustomerID_8192EU(
IN PADAPTER padapter
)
{
#if 0
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
// For customized behavior.
if((pHalData->EEPROMVID == 0x103C) && (pHalData->EEPROMPID == 0x1629))// HP Lite-On for RTL8188CUS Slim Combo.
pHalData->CustomerID = RT_CID_819x_HP;
else if ((pHalData->EEPROMVID == 0x9846) && (pHalData->EEPROMPID == 0x9041))
pHalData->CustomerID = RT_CID_NETGEAR;
else if ((pHalData->EEPROMVID == 0x2019) && (pHalData->EEPROMPID == 0x1201))
pHalData->CustomerID = RT_CID_PLANEX;
else if((pHalData->EEPROMVID == 0x0BDA) &&(pHalData->EEPROMPID == 0x5088))
pHalData->CustomerID = RT_CID_CC_C;
DBG_871X("PID= 0x%x, VID= %x\n",pHalData->EEPROMPID,pHalData->EEPROMVID);
// Decide CustomerID according to VID/DID or EEPROM
switch(pHalData->EEPROMCustomerID)
{
case EEPROM_CID_DEFAULT:
if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3308))
pHalData->CustomerID = RT_CID_DLINK;
else if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3309))
pHalData->CustomerID = RT_CID_DLINK;
else if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330a))
pHalData->CustomerID = RT_CID_DLINK;
else if((pHalData->EEPROMVID == 0x0BFF) && (pHalData->EEPROMPID == 0x8160))
{
pHalData->bAutoConnectEnable = _FALSE;
pHalData->CustomerID = RT_CID_CHINA_MOBILE;
}
else if((pHalData->EEPROMVID == 0x0BDA) && (pHalData->EEPROMPID == 0x5088))
pHalData->CustomerID = RT_CID_CC_C;
DBG_871X("PID= 0x%x, VID= %x\n",pHalData->EEPROMPID,pHalData->EEPROMVID);
break;
case EEPROM_CID_WHQL:
//padapter->bInHctTest = TRUE;
//pMgntInfo->bSupportTurboMode = FALSE;
//pMgntInfo->bAutoTurboBy8186 = FALSE;
//pMgntInfo->PowerSaveControl.bInactivePs = FALSE;
//pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE;
//pMgntInfo->PowerSaveControl.bLeisurePs = FALSE;
//pMgntInfo->PowerSaveControl.bLeisurePsModeBackup = FALSE;
//pMgntInfo->keepAliveLevel = 0;
//padapter->bUnloadDriverwhenS3S4 = FALSE;
break;
default:
pHalData->CustomerID = RT_CID_DEFAULT;
break;
}
DBG_871X("MGNT Customer ID: 0x%2x\n", pHalData->CustomerID);
hal_CustomizedBehavior_8192EU(padapter);
#endif
}
static VOID
ReadLEDSetting_8192EU(
IN PADAPTER Adapter,
IN u8* PROMContent,
IN BOOLEAN AutoloadFail
)
{
struct led_priv *pledpriv = &(Adapter->ledpriv);
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
#ifdef CONFIG_SW_LED
pledpriv->bRegUseLed = _TRUE;
switch(pHalData->CustomerID)
{
default:
pledpriv->LedStrategy = SW_LED_MODE1;
break;
}
pHalData->bLedOpenDrain = _TRUE;// Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16.
#else // HW LED
pledpriv->LedStrategy = HW_LED;
#endif //CONFIG_SW_LED
}
VOID
InitAdapterVariablesByPROM_8192EU(
IN PADAPTER Adapter
)
{
PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
hal_InitPGData_8192E(Adapter, pHalData->efuse_eeprom_data);
Hal_EfuseParseIDCode8192E(Adapter, pHalData->efuse_eeprom_data);
Hal_ReadPROMVersion8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_ReadIDs_8192EU(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_config_macaddr(Adapter, pHalData->bautoload_fail_flag);
Hal_ReadPowerSavingMode8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadTxPowerInfo8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadBoardType8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
//
// Read Bluetooth co-exist and initialize
//
Hal_EfuseParseBTCoexistInfo8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadChannelPlan8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_EfuseParseXtal_8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadThermalMeter_8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadAntennaDiversity8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadPAType_8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadAmplifierType_8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadRFEType_8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_CustomizeByCustomerID_8192EU(Adapter);
ReadLEDSetting_8192EU(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_EfuseParseKFreeData_8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
}
static void Hal_ReadPROMContent_8192EU(
IN PADAPTER Adapter
)
{
PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
u8 eeValue;
/* check system boot selection */
eeValue = rtw_read8(Adapter, REG_SYS_EEPROM_CTRL);
pHalData->EepromOrEfuse = (eeValue & EEPROMSEL) ? _TRUE : _FALSE;
pHalData->bautoload_fail_flag = (eeValue & EEPROM_EN) ? _FALSE : _TRUE;
DBG_8192C("Boot from %s, Autoload %s !\n", (pHalData->EepromOrEfuse ? "EEPROM" : "EFUSE"),
(pHalData->bautoload_fail_flag ? "Fail" : "OK") );
//pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE;
InitAdapterVariablesByPROM_8192EU(Adapter);
}
void
ReadAdapterInfo8192EU(
IN PADAPTER Adapter
)
{
/* Read all content in Efuse/EEPROM. */
Hal_ReadPROMContent_8192EU(Adapter);
/* We need to define the RF type after all PROM value is recognized. */
hal_ReadRFType_8192E(Adapter);
}
void UpdateInterruptMask8192EU(PADAPTER padapter,u8 bHIMR0 ,u32 AddMSR, u32 RemoveMSR)
{
HAL_DATA_TYPE *pHalData;
u32 *himr;
pHalData = GET_HAL_DATA(padapter);
if(bHIMR0)
himr = &(pHalData->IntrMask[0]);
else
himr = &(pHalData->IntrMask[1]);
if (AddMSR)
*himr |= AddMSR;
if (RemoveMSR)
*himr &= (~RemoveMSR);
if(bHIMR0)
rtw_write32(padapter, REG_HIMR0_8192E, *himr);
else
rtw_write32(padapter, REG_HIMR1_8192E, *himr);
}
void SetHwReg8192EU(PADAPTER Adapter, u8 variable, u8* val)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(Adapter);
_func_enter_;
switch(variable)
{
case HW_VAR_RXDMA_AGG_PG_TH:
#ifdef CONFIG_USB_RX_AGGREGATION
{
//threshold == 1 , Disable Rx-agg when AP is B/G mode or wifi_spec=1 to prevent bad TP.
u8 threshold = *((u8 *)val);
if( threshold == 0){
threshold = (pHalData->RegAcUsbDmaSize & 0x0F);
}
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold);
#ifdef CONFIG_80211N_HT
{
// 2014-07-24 Fix WIFI Logo -5.2.4/5.2.9 - DT3 low TP issue
// Adjust RxAggrTimeout to close to zero disable RxAggr for RxAgg-USB mode, suggested by designer
// Timeout value is calculated by 34 / (2^n)
struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
struct ht_priv *phtpriv = &pmlmepriv->htpriv;
if(pHalData->UsbRxAggMode == USB_RX_AGG_USB){
#if 1
//BG mode || (wifi_spec=1 && BG mode Testbed)
if((threshold == 1) && (_FALSE == phtpriv->ht_option) )
#else
//(wifi_spec=1 && BG mode Testbed)
if((Adapter->registrypriv.wifi_spec==1) && (_FALSE == phtpriv->ht_option) )
#endif
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH+1, 0);
}
}
#endif//#ifdef CONFIG_80211N_HT
}
#endif
break;
case HW_VAR_SET_RPWM:
#ifdef CONFIG_LPS_LCLK
{
u8 ps_state = *((u8 *)val);
//rpwm value only use BIT0(clock bit) ,BIT6(Ack bit), and BIT7(Toggle bit) for 88e.
//BIT0 value - 1: 32k, 0:40MHz.
//BIT6 value - 1: report cpwm value after success set, 0:do not report.
//BIT7 value - Toggle bit change.
//modify by Thomas. 2012/4/2.
ps_state = ps_state & 0xC1;
//DBG_871X("##### Change RPWM value to = %x for switch clk #####\n",ps_state);
rtw_write8(Adapter, REG_USB_HRPWM, ps_state);
}
#endif
#ifdef CONFIG_AP_WOWLAN
if (pwrctl->wowlan_ap_mode == _TRUE)
{
u8 ps_state = *((u8 *)val);
DBG_871X("%s, RPWM\n", __func__);
//rpwm value only use BIT0(clock bit) ,BIT6(Ack bit), and BIT7(Toggle bit) for 88e.
//BIT0 value - 1: 32k, 0:40MHz.
//BIT6 value - 1: report cpwm value after success set, 0:do not report.
//BIT7 value - Toggle bit change.
//modify by Thomas. 2012/4/2.
ps_state = ps_state & 0xC1;
//DBG_871X("##### Change RPWM value to = %x for switch clk #####\n",ps_state);
rtw_write8(Adapter, REG_USB_HRPWM, ps_state);
}
#endif
break;
default :
SetHwReg8192E(Adapter, variable, val);
break;
}
}
void GetHwReg8192EU(PADAPTER Adapter, u8 variable, u8* val)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
_func_enter_;
switch(variable)
{
default:
GetHwReg8192E(Adapter,variable,val);
break;
}
_func_exit_;
}
u8
GetHalDefVar8192EUsb(
IN PADAPTER Adapter,
IN HAL_DEF_VARIABLE eVariable,
IN PVOID pValue
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 bResult = _SUCCESS;
switch(eVariable)
{
case HW_VAR_MAX_RX_AMPDU_FACTOR:
*(( u32*)pValue) = MAX_AMPDU_FACTOR_64K; //MAX_AMPDU_FACTOR_64K;
break;
default:
GetHalDefVar8192E(Adapter,eVariable,pValue);
break;
}
return bResult;
}
//
// Description:
// Change default setting of specified variable.
//
u8
SetHalDefVar8192EUsb(
IN PADAPTER Adapter,
IN HAL_DEF_VARIABLE eVariable,
IN PVOID pValue
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 bResult = _SUCCESS;
switch(eVariable)
{
default:
SetHalDefVar8192E(Adapter,eVariable,pValue);
break;
}
return bResult;
}
void _update_response_rate(_adapter *padapter,unsigned int mask)
{
u8 RateIndex = 0;
// Set RRSR rate table.
rtw_write8(padapter, REG_RRSR, mask&0xff);
rtw_write8(padapter,REG_RRSR+1, (mask>>8)&0xff);
// Set RTS initial rate
// We just need to update to pHalData->RTSInitRate which will be set in Tx descriptor.
}
static void rtl8192eu_init_default_value(_adapter * padapter)
{
rtl8192e_init_default_value(padapter);
}
static u8 rtl8192eu_ps_func(PADAPTER Adapter,HAL_INTF_PS_FUNC efunc_id, u8 *val)
{
u8 bResult = _TRUE;
switch(efunc_id){
#if defined(CONFIG_AUTOSUSPEND) && defined(SUPPORT_HW_RFOFF_DETECTED)
case HAL_USB_SELECT_SUSPEND:
{
u8 bfwpoll = *(( u8*)val);
//rtl8188e_set_FwSelectSuspend_cmd(Adapter,bfwpoll ,500);//note fw to support hw power down ping detect
}
break;
#endif //CONFIG_AUTOSUSPEND && SUPPORT_HW_RFOFF_DETECTED
default:
break;
}
return bResult;
}
void rtl8192eu_set_hal_ops(_adapter * padapter)
{
struct hal_ops *pHalFunc = &padapter->HalFunc;
_func_enter_;
pHalFunc->hal_power_on = _InitPowerOn_8192EU;
pHalFunc->hal_power_off = hal_poweroff_8192eu;
pHalFunc->hal_init = &rtl8192eu_hal_init;
pHalFunc->hal_deinit = &rtl8192eu_hal_deinit;
pHalFunc->inirp_init = &rtl8192eu_inirp_init;
pHalFunc->inirp_deinit = &rtl8192eu_inirp_deinit;
pHalFunc->init_xmit_priv = &rtl8192eu_init_xmit_priv;
pHalFunc->free_xmit_priv = &rtl8192eu_free_xmit_priv;
pHalFunc->init_recv_priv = &rtl8192eu_init_recv_priv;
pHalFunc->free_recv_priv = &rtl8192eu_free_recv_priv;
#ifdef CONFIG_SW_LED
pHalFunc->InitSwLeds = &rtl8192eu_InitSwLeds;
pHalFunc->DeInitSwLeds = &rtl8192eu_DeInitSwLeds;
#else //case of hw led or no led
pHalFunc->InitSwLeds = NULL;
pHalFunc->DeInitSwLeds = NULL;
#endif//CONFIG_SW_LED
pHalFunc->init_default_value = &rtl8192eu_init_default_value;
pHalFunc->intf_chip_configure = &rtl8192eu_interface_configure;
pHalFunc->read_adapter_info = &ReadAdapterInfo8192EU;
pHalFunc->SetHwRegHandler = &SetHwReg8192EU;
pHalFunc->GetHwRegHandler = &GetHwReg8192EU;
pHalFunc->GetHalDefVarHandler = &GetHalDefVar8192EUsb;
pHalFunc->SetHalDefVarHandler = &SetHalDefVar8192EUsb;
pHalFunc->hal_xmit = &rtl8192eu_hal_xmit;
pHalFunc->mgnt_xmit = &rtl8192eu_mgnt_xmit;
pHalFunc->hal_xmitframe_enqueue = &rtl8192eu_hal_xmitframe_enqueue;
#ifdef CONFIG_HOSTAPD_MLME
pHalFunc->hostap_mgnt_xmit_entry = &rtl8192eu_hostap_mgnt_xmit_entry;
#endif
pHalFunc->interface_ps_func = &rtl8192eu_ps_func;
#ifdef CONFIG_XMIT_THREAD_MODE
pHalFunc->xmit_thread_handler = &rtl8192eu_xmit_buf_handler;
#endif
#ifdef CONFIG_SUPPORT_USB_INT
pHalFunc->interrupt_handler = interrupt_handler_8192eu;
#endif
rtl8192e_set_hal_ops(pHalFunc);
_func_exit_;
}
Reference in New Issue View Git Blame Copy Permalink