Github/rtl8192eu-linux-driver
1
0
Fork 0
mirror of https://github.com/Mange/rtl8192eu-linux-driver synced 2024-11-22 13:35:00 +00:00
Code Issues Packages Projects Releases Wiki Activity
2da7f5169c
rtl8192eu-linux-driver/hal/phydm/rtl8192e/hal8192ereg.h
CGarces 3d6c7de21a Updated to 4.4.1
2017-05-11 20:49:39 +02:00

1105 lines
40 KiB
C
Raw Blame History

/*****************************************************************************
* Copyright(c) 2009, RealTEK Technology Inc. All Right Reserved.
*
* Module: __INC_HAL8192EREG_H
*
*
* Note: 1. Define Mac register address and corresponding bit mask map
*
*
* Export: Constants, macro, functions(API), global variables(None).
*
* Abbrev:
*
* History:
* Data Who Remark
*
*****************************************************************************/
#ifndef __INC_HAL8192EREG_H
#define __INC_HAL8192EREG_H
//============================================================
//
//============================================================
//-----------------------------------------------------
//
// 0x0000h ~ 0x00FFh System Configuration
//
//-----------------------------------------------------
#define REG_SYS_ISO_CTRL_8192E 0x0000 // 2 Byte
#define REG_SYS_FUNC_EN_8192E 0x0002 // 2 Byte
#define REG_SYS_PW_CTRL_8192E 0x0004 // 4 Byte
#define REG_SYS_CLKR_8192E 0x0008 // 2 Byte
#define REG_SYS_EEPROM_CTRL_8192E 0x000A // 2 Byte
#define REG_EE_VPD_8192E 0x000C // 2 Byte
#define REG_SYS_SWR_CTRL1_8192E 0x0010 // 1 Byte
#define REG_SYS_SWR_CTRL2_8192E 0x0014 // 1 Byte
#define REG_SYS_SWR_CTRL3_8192E 0x0018 // 4 Byte
#define REG_RSV_CTRL_8192E 0x001C // 3 Byte
#define REG_RF_CTRL_8192E 0x001F // 1 Byte
#define REG_AFE_CTRL1_8192E 0x0024 // 4 Byte
#define REG_AFE_CTRL2_8192E 0x0028 // 4 Byte
#define REG_AFE_CTRL3_8192E 0x002c // 4 Byte
#define REG_EFUSE_CTRL_8192E 0x0030
#define REG_LDO_EFUSE_CTRL_8192E 0x0034
#define REG_PWR_DATA_8192E 0x0038
#define REG_CAL_TIMER_8192E 0x003C
#define REG_ACLK_MON_8192E 0x003E
#define REG_GPIO_MUXCFG_8192E 0x0040
#define REG_GPIO_IO_SEL_8192E 0x0042
#define REG_MAC_PINMUX_CFG_8192E 0x0043 // ??????
#define REG_GPIO_PIN_CTRL_8192E 0x0044
#define REG_GPIO_INTM_8192E 0x0048
#define BIT_REG_LED_CFG_8192E 0x004C
#define REG_LEDCFG2_8192E 0x004E // ??????
#define REG_FSIMR_8192E 0x0050
#define REG_FSISR_8192E 0x0054
#define REG_HSIMR_8192E 0x0058
#define REG_HSISR_8192E 0x005c
#define REG_PAD_CTRL1_8192E 0x0064
#define REG_WL_BT_PWR_CTRL_8192E 0x0068
#define REG_SDM_DEBUG_8192E 0x006C
#define REG_SDIO_CTRL_8192E 0x0070
#define REG_HCI_OPT_CTRL_8192E 0x0074
#define REG_AFE_CTRL4_8192E 0x0078
#define REG_8051FW_CTRL_8192E 0x0080
#define REG_WLLPS_CTRL_8192E 0x0090
#define REG_HIMR0_8192E 0x00B0
#define REG_HISR0_8192E 0x00B4
#define REG_HIMR1_8192E 0x00B8
#define REG_HISR1_8192E 0x00BC
#define REG_PMC_DBG_CTRL2_8192E 0x00CC
#define REG_EFUSE_BURN_GNT_8192E 0x00CF
#define REG_SYS_CFG1_8192E 0x00F0
#define REG_SYS_CFG2_8192E 0x00FC
//-----------------------------------------------------
//
// 0x0100h ~ 0x01FFh MACTOP General Configuration
//
//-----------------------------------------------------
#define REG_CR_8192E 0x0100
#define REG_PBP_8192E 0x0104 // ??????
#define REG_PKT_BUFF_ACCESS_CTRL_8192E 0x0106 // ??????
#define REG_TRXDMA_CTRL_8192E 0x010C
#define REG_TRXFF_BNDY_8192E 0x0114
#define REG_RXFF_PTR_8192E 0x011C
#define REG_CPWM_8192E 0x012C
#define REG_FWIMR_8192E 0x0130
#define REG_FWISR_8192E 0x0134
#define REG_FTIMR_8192E 0x0138
#define REG_PKTBUF_DBG_CTRL_8192E 0x0140
#define REG_RXPKTBUF_CTRL_8192E 0x0142 // ??????
#define REG_PKTBUF_DBG_DATA_L_8192E 0x0144
#define REG_PKTBUF_DBG_DATA_H_8192E 0x0148
#define REG_TC0_CTRL_8192E 0x0150
#define REG_TC1_CTRL_8192E 0x0154
#define REG_TC2_CTRL_8192E 0x0158
#define REG_TC3_CTRL_8192E 0x015C
#define REG_TC4_CTRL_8192E 0x0160
#define REG_TCUNIT_BASE_8192E 0x0164
#define REG_RSVD3_8192E 0x0168 // ?????
#define REG_C2HEVT_MSG_NORMAL_8192E 0x01A0 // ??????
#define REG_C2HEVT_CMD_SEQ_88XX 0x01A1 // ??????
#define REG_C2hEVT_CMD_CONTENT_88XX 0x01A2 // ??????
#define REG_C2HEVT_CMD_LEN_88XX 0x01AE // ??????
#define REG_C2HEVT_CLEAR_8192E 0x01AF // ??????
#define REG_MCUTST_1_8192E 0x01C0
#define REG_MCUTST_WOWLAN_8192E 0x01C7 // ??????
#define REG_FMETHR_8192E 0x01C8
#define REG_HMETFR_8192E 0x01CC
#define REG_HMEBOX_0_8192E 0x01D0
#define REG_HMEBOX_1_8192E 0x01D4
#define REG_HMEBOX_2_8192E 0x01D8
#define REG_HMEBOX_3_8192E 0x01DC
#define REG_LLT_INIT_8192E 0x01E0
#define REG_HMEBOX_EXT0_8192E 0x01F0 // ??????
#define REG_HMEBOX_EXT1_8192E 0x01F4 // ??????
#define REG_HMEBOX_EXT2_8192E 0x01F8 // ??????
#define REG_HMEBOX_EXT3_8192E 0x01FC // ??????
//-----------------------------------------------------
//
// 0x0200h ~ 0x027Fh TXDMA Configuration
//
//-----------------------------------------------------
#define REG_RQPN_8192E 0x0200
#define REG_FIFOPAGE_8192E 0x0204
#define REG_DWBCN0_CTRL_8192E 0x0208
#define REG_TXDMA_OFFSET_CHK_8192E 0x020C
#define REG_TXDMA_STATUS_8192E 0x0210
#define REG_RQPN_NPQ_8192E 0x0214
#define REG_AUTO_LLT_8192E 0x0224
#define REG_DWBCN1_CTRL_8192E 0x0228
//-----------------------------------------------------
//
// 0x0280h ~ 0x02FFh RXDMA Configuration
//
//-----------------------------------------------------
#define REG_RXDMA_AGG_PG_TH_8192E 0x0280
#define REG_RXPKT_NUM_8192E 0x0284 // The number of packets in RXPKTBUF.
#define REG_RXDMA_CONTROL_8192E 0x0286 // ?????? Control the RX DMA.
#define REG_RXDMA_STATUS_8192E 0x0288
#define REG_RXDMA_PRO_8192E 0x0290 // ??????
#define REG_EARLY_MODE_CONTROL_8192E 0x02BC // ??????
#define REG_RSVD5_8192E 0x02F0 // ??????
//-----------------------------------------------------
//
// 0x0300h ~ 0x03FFh PCIe
//
//-----------------------------------------------------
#define REG_PCIE_CTRL_REG_8192E 0x0300
#define REG_INT_MIG_8192E 0x0304 // Interrupt Migration
#define REG_BCNQ_TXBD_DESA_8192E 0x0308 // TX Beacon Descriptor Address
#define REG_MGQ_TXBD_DESA_8192E 0x0310 // TX Manage Queue Descriptor Address
#define REG_VOQ_TXBD_DESA_8192E 0x0318 // TX VO Queue Descriptor Address
#define REG_VIQ_TXBD_DESA_8192E 0x0320 // TX VI Queue Descriptor Address
#define REG_BEQ_TXBD_DESA_8192E 0x0328 // TX BE Queue Descriptor Address
#define REG_BKQ_TXBD_DESA_8192E 0x0330 // TX BK Queue Descriptor Address
#define REG_RXQ_RXBD_DESA_8192E 0x0338 // RX Queue Descriptor Address
#define REG_HI0Q_TXBD_DESA_8192E 0x0340
#define REG_HI1Q_TXBD_DESA_8192E 0x0348
#define REG_HI2Q_TXBD_DESA_8192E 0x0350
#define REG_HI3Q_TXBD_DESA_8192E 0x0358
#define REG_HI4Q_TXBD_DESA_8192E 0x0360
#define REG_HI5Q_TXBD_DESA_8192E 0x0368
#define REG_HI6Q_TXBD_DESA_8192E 0x0370
#define REG_HI7Q_TXBD_DESA_8192E 0x0378
#define REG_MGQ_TXBD_NUM_8192E 0x0380
#define REG_RX_RXBD_NUM_8192E 0x0382
#define REG_VOQ_TXBD_NUM_8192E 0x0384
#define REG_VIQ_TXBD_NUM_8192E 0x0386
#define REG_BEQ_TXBD_NUM_8192E 0x0388
#define REG_BKQ_TXBD_NUM_8192E 0x038A
#define REG_HI0Q_TXBD_NUM_8192E 0x038C
#define REG_HI1Q_TXBD_NUM_8192E 0x038E
#define REG_HI2Q_TXBD_NUM_8192E 0x0390
#define REG_HI3Q_TXBD_NUM_8192E 0x0392
#define REG_HI4Q_TXBD_NUM_8192E 0x0394
#define REG_HI5Q_TXBD_NUM_8192E 0x0396
#define REG_HI6Q_TXBD_NUM_8192E 0x0398
#define REG_HI7Q_TXBD_NUM_8192E 0x039A
#define REG_TSFTIMER_HCI_8192E 0x039C
//Read Write Point
#define REG_VOQ_TXBD_IDX_8192E 0x03A0
#define REG_VIQ_TXBD_IDX_8192E 0x03A4
#define REG_BEQ_TXBD_IDX_8192E 0x03A8
#define REG_BKQ_TXBD_IDX_8192E 0x03AC
#define REG_MGQ_TXBD_IDX_8192E 0x03B0
#define REG_RXQ_TXBD_IDX_8192E 0x03B4
#define REG_HI0Q_TXBD_IDX_8192E 0x03B8
#define REG_HI1Q_TXBD_IDX_8192E 0x03BC
#define REG_HI2Q_TXBD_IDX_8192E 0x03C0
#define REG_HI3Q_TXBD_IDX_8192E 0x03C4
#define REG_HI4Q_TXBD_IDX_8192E 0x03C8
#define REG_HI5Q_TXBD_IDX_8192E 0x03CC
#define REG_HI6Q_TXBD_IDX_8192E 0x03D0
#define REG_HI7Q_TXBD_IDX_8192E 0x03D4
#define REG_PCIE_HCPWM_8192EE 0x03D8 // ??????
#define REG_PCIE_HRPWM_8192EE 0x03DC //PCIe RPWM // ??????
#define REG_DBI_WDATA_V1_8192E 0x03E8
#define REG_DBI_RDATA_V1_8192E 0x03EC
#define REG_DBI_FLAG_V1_8192E 0x03F0
#define REG_MDIO_V1_8192E 0x3F4
#define REG_PCIE_MIX_CFG_8192E 0x3F8
//-----------------------------------------------------
//
// 0x0400h ~ 0x047Fh Protocol Configuration
//
//-----------------------------------------------------
#define REG_TXPKT_EMPTY_8192E 0x041A
#define REG_FWHW_TXQ_CTRL_8192E 0x0420
#define REG_HWSEQ_CTRL_8192E 0x0423
#define REG_BCNQ_BDNY_8192E 0x0424
#define REG_MGQ_BDNY_8192E 0x0425
#define REG_LIFETIME_EN_8192E 0x0426
#define REG_FW_FREE_TAIL_8192E 0x0427
#define REG_SPEC_SIFS_8192E 0x0428
#define REG_RETRY_LIMIT_8192E 0x042A
#define REG_TXBF_CTRL_8192E 0x042C
#define REG_DARFRC_8192E 0x0430
#define REG_RARFRC_8192E 0x0438
#define REG_RRSR_8192E 0x0440
#define REG_ARFR0_8192E 0x0444
#define REG_ARFR1_8192E 0x044C
#define REG_CCK_CHECK_8192E 0x0454
#define REG_AMPDU_MAX_TIME_8192E 0x0456
#define REG_BCNQ1_BDNY_8192E 0x0457
#define REG_AMPDU_MAX_LENGTH_8192E 0x0458
#define REG_WMAC_LBK_BUF_HD_8192E 0x045D
#define REG_NDPA_OPT_CTRL_8192E 0x045F
#define REG_FAST_EDCA_CTRL_8192E 0x0460
#define REG_RD_RESP_PKT_TH_8192E 0x0463
#define REG_DATA_SC_8192E 0x0483
#define REG_TXRPT_START_OFFSET 0x04AC
#define REG_POWER_STAGE1_8192E 0x04B4
#define REG_SW_AMPDU_BURST_MODE_CTRL_8192E 0x04BC
#define REG_PKT_LIFE_TIME_8192E 0x04C0
#define REG_PKT_BE_BK_LIFE_TIME_8192E 0x04C2 // ??????
#define REG_STBC_SETTING_8192E 0x04C4
#define REG_PROT_MODE_CTRL_8192E 0x04C8
#define REG_MAX_AGGR_NUM_8192E 0x04CA
#define REG_RTS_MAX_AGGR_NUM_8192E 0x04CB
#define REG_BAR_MODE_CTRL_8192E 0x04CC
#define REG_RA_TRY_RATE_AGG_LMT_8192E 0x04CF
#define REG_MACID_SLEEP2_8192E 0x04D0
#define REG_HW_SEQ0_8192E 0x04D8
#define REG_HW_SEQ1_8192E 0x04DA
#define REG_HW_SEQ2_8192E 0x04DC
#define REG_HW_SEQ3_8192E 0x04DE
#define REG_TXPKTBUF_WMAC_LBK_BF_HD_8192E 0x045D // ??????
//-----------------------------------------------------
//
// 0x0500h ~ 0x05FFh EDCA Configuration
//
//-----------------------------------------------------
// gogogo
#define REG_EDCA_VO_PARAM_8192E 0x0500
#define REG_EDCA_VI_PARAM_8192E 0x0504
#define REG_EDCA_BE_PARAM_8192E 0x0508
#define REG_EDCA_BK_PARAM_8192E 0x050C
#define REG_BCNTCFG_8192E 0x0510
#define REG_PIFS_8192E 0x0512
#define REG_RDG_PIFS_8192E 0x0513
#define REG_SIFS_CTX_8192E 0x0514
#define REG_SIFS_TRX_8192E 0x0516
#define REG_AGGR_BREAK_TIME_8192E 0x051A
#define REG_SLOT_8192E 0x051B
#define REG_TX_PTCL_CTRL_8192E 0x0520
#define REG_TXPAUSE_8192E 0x0522
#define REG_DIS_TXREQ_CLR_8192E 0x0523
#define REG_RD_CTRL_8192E 0x0524
//
// Format for offset 540h-542h:
// [3:0]: TBTT prohibit setup in unit of 32us. The time for HW getting beacon content before TBTT.
// [7:4]: Reserved.
// [19:8]: TBTT prohibit hold in unit of 32us. The time for HW holding to send the beacon packet.
// [23:20]: Reserved
// Description:
// |
// |<--Setup--|--Hold------------>|
// --------------|----------------------
// |
// TBTT
// Note: We cannot update beacon content to HW or send any AC packets during the time between Setup and Hold.
// Described by Designer Tim and Bruce, 2011-01-14.
//
#define REG_TBTT_PROHIBIT_8192E 0x0540
#define REG_RD_NAV_NXT_8192E 0x0544
#define REG_NAV_PROT_LEN_8192E 0x0546
#define REG_BCN_CTRL_8192E 0x0550
#define REG_BCN_CTRL_1_8192E 0x0551
#define REG_MBID_NUM_8192E 0x0552
#define REG_DUAL_TSF_RST_8192E 0x0553
#define REG_MBSSID_BCN_SPACE_8192E 0x0554
#define REG_DRVERLYINT_8192E 0x0558
#define REG_BCNDMATIM_8192E 0x0559
#define REG_ATIMWND_8192E 0x055A
#define REG_USTIME_TSF_8192E 0x055C
#define REG_BCN_MAX_ERR_8192E 0x055D
#define REG_RXTSF_OFFSET_CCK_8192E 0x055E
#define REG_RXTSF_OFFSET_OFDM_8192E 0x055F
#define REG_TSFTR_8192E 0x0560
#define REG_CTWND_8192E 0x0572
#define REG_SECONDARY_CCA_CTRL_8192E 0x0577 // ??????
#define REG_PSTIMER_8192E 0x0580
#define REG_TIMER0_8192E 0x0584
#define REG_TIMER1_8192E 0x0588
#define REG_ACMHWCTRL_8192E 0x05C0
#define REG_SCH_TXCMD_8192E 0x05F8
//-----------------------------------------------------
//
// 0x0600h ~ 0x07FFh WMAC Configuration
//
//-----------------------------------------------------
// gogogo
#define REG_MAC_CR_8192E 0x0600
#define REG_TCR_8192E 0x0604
#define REG_RCR_8192E 0x0608
#define REG_RX_PKT_LIMIT_8192E 0x060C
#define REG_RX_DLK_TIME_8192E 0x060D
#define REG_RX_DRVINFO_SZ_8192E 0x060F
#define REG_MACID_8192E 0x0610
#define REG_BSSID_8192E 0x0618
#define REG_MAR_8192E 0x0620
#define REG_MBIDCAMCFG_8192E 0x0628
#define REG_USTIME_EDCA_8192E 0x0638
#define REG_MAC_SPEC_SIFS_8192E 0x063A
#define REG_RESP_SIFP_CCK_8192E 0x063C
#define REG_RESP_SIFS_OFDM_8192E 0x063E
#define REG_ACKTO_8192E 0x0640
#define REG_CTS2TO_8192E 0x0641
#define REG_EIFS_8192E 0x0642
#define REG_NAV_UPPER_8192E 0x0652 // ??????
#define REG_TRXPTCL_CTL_8192E 0x0668
// Security
#define REG_CAMCMD_8192E 0x0670
#define REG_CAMWRITE_8192E 0x0674
#define REG_CAMREAD_8192E 0x0678
#define REG_CAMDBG_8192E 0x067C
#define REG_SECCFG_8192E 0x0680
// Power
#define REG_WOW_CTRL_8192E 0x0690
#define REG_PS_RX_INFO_8192E 0x0692
#define REG_UAPSD_TID_8192E 0x0693
#define REG_WKFMCAM_NUM_8192E 0x0698
#define REG_RXFLTMAP0_8192E 0x06A0
#define REG_RXFLTMAP1_8192E 0x06A2
#define REG_RXFLTMAP2_8192E 0x06A4
#define REG_BCN_PSR_RPT_8192E 0x06A8
#define REG_BT_COEX_TABLE0_8192E 0x06C0
#define REG_BT_COEX_TABLE1_8192E 0x06C4
#define REG_BT_COEX_TABLE2_8192E 0x06C8
#define REG_BT_COEX_TABLE3_8192E 0x06CC
#define REG_ASSOCIATED_BFMER0_INFO_8192E 0x06E4
#define REG_ASSOCIATED_BFMER1_INFO_8192E 0x06EC
#define REG_CSI_RPT_PARAM_BW20_8192E 0x06F4
#define REG_CSI_RPT_PARAM_BW40_8192E 0x06F8
#define REG_CSI_RPT_PARAM_BW80_8192E 0x06FC
// Hardware Port 2
#define REG_MACID1_8192E 0x0700
#define REG_BSSID1_8192E 0x0708
#define REG_ASSOCIATED_BFMEE_SEL_8192E 0x0714
#define REG_SND_PTCL_CTRL_8192E 0x0718
// BT
#define REG_BT_STATISTICS_CTRL_8192E 0x076E // bit0~bit3 for REG_BT_STATISTICS_CTRL , bit4~bit15 for REG_BT_COEX_ENH_INTF_CTRL
#define REG_BT_STATISTICS_OTH_CTRL_8192E 0x0778
#define REG_TDMA_TIME_AND_RPT_SAM_SET_8192E 0x0790
//-----------------------------------------------------
//
// Redifine 8192C register definition for compatibility
//
//-----------------------------------------------------
// TODO: use these definition when using REG_xxx naming rule.
// NOTE: DO NOT Remove these definition. Use later.
#define EFUSE_CTRL_8192E REG_EFUSE_CTRL_8192E // E-Fuse Control.
#define EFUSE_TEST_8192E REG_LDO_EFUSE_CTRL_8192E // E-Fuse Test.
#define MSR_8192E (REG_CR_8192E + 2) // Media Status register
#define ISR_8192E REG_HISR0_8192E
#define TSFR_8192E REG_TSFTR_8192E // Timing Sync Function Timer Register.
#define PBP_8192E REG_PBP_8192E
// Redifine MACID register, to compatible prior ICs.
#define IDR0_8192E REG_MACID_8192E // MAC ID Register, Offset 0x0050-0x0053
#define IDR4_8192E (REG_MACID_8192E + 4) // MAC ID Register, Offset 0x0054-0x0055
//
// 9. Security Control Registers (Offset: )
//
#define RWCAM_8192E REG_CAMCMD_8192E //IN 8190 Data Sheet is called CAMcmd
#define WCAMI_8192E REG_CAMWRITE_8192E // Software write CAM input content
#define RCAMO_8192E REG_CAMREAD_8192E // Software read/write CAM config
#define CAMDBG_8192E REG_CAMDBG_8192E
#define SECR_8192E REG_SECCFG_8192E //Security Configuration Register
//----------------------------------------------------------------------------
// 8195 IMR/ISR bits (offset 0xB0, 8bits)
//----------------------------------------------------------------------------
#define IMR_DISABLED_8192E 0
// IMR DW0(0x00B0-00B3) Bit 0-31
#define IMR_TIMER2_8192E BIT31 // Timeout interrupt 2
#define IMR_TIMER1_8192E BIT30 // Timeout interrupt 1
#define IMR_PSTIMEOUT_8192E BIT29 // Power Save Time Out Interrupt
#define IMR_GTINT4_8192E BIT28 // When GTIMER4 expires, this bit is set to 1
#define IMR_GTINT3_8192E BIT27 // When GTIMER3 expires, this bit is set to 1
#define IMR_TXBCN0ERR_8192E BIT26 // Transmit Beacon0 Error
#define IMR_TXBCN0OK_8192E BIT25 // Transmit Beacon0 OK
#define IMR_TSF_BIT32_TOGGLE_8192E BIT24 // TSF Timer BIT32 toggle indication interrupt
#define IMR_BCNDMAINT0_8192E BIT20 // Beacon DMA Interrupt 0
#define IMR_BCNDERR0_8192E BIT16 // Beacon Queue DMA OK0
#define IMR_HSISR_IND_ON_INT_8192E BIT15 // HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1)
#define IMR_BCNDMAINT_E_8192E BIT14 // Beacon DMA Interrupt Extension for Win7
#define IMR_ATIMEND_8192E BIT12 // CTWidnow End or ATIM Window End
#define IMR_C2HCMD_8192E BIT10 // CPU to Host Command INT Status, Write 1 clear
#define IMR_CPWM2_8192E BIT9 // CPU power Mode exchange INT Status, Write 1 clear
#define IMR_CPWM_8192E BIT8 // CPU power Mode exchange INT Status, Write 1 clear
#define IMR_HIGHDOK_8192E BIT7 // High Queue DMA OK
#define IMR_MGNTDOK_8192E BIT6 // Management Queue DMA OK
#define IMR_BKDOK_8192E BIT5 // AC_BK DMA OK
#define IMR_BEDOK_8192E BIT4 // AC_BE DMA OK
#define IMR_VIDOK_8192E BIT3 // AC_VI DMA OK
#define IMR_VODOK_8192E BIT2 // AC_VO DMA OK
#define IMR_RDU_8192E BIT1 // Rx Descriptor Unavailable
#define IMR_ROK_8192E BIT0 // Receive DMA OK
// IMR DW1(0x00B4-00B7) Bit 0-31
#define IMR_BCNDMAINT7_8192E BIT27 // Beacon DMA Interrupt 7
#define IMR_BCNDMAINT6_8192E BIT26 // Beacon DMA Interrupt 6
#define IMR_BCNDMAINT5_8192E BIT25 // Beacon DMA Interrupt 5
#define IMR_BCNDMAINT4_8192E BIT24 // Beacon DMA Interrupt 4
#define IMR_BCNDMAINT3_8192E BIT23 // Beacon DMA Interrupt 3
#define IMR_BCNDMAINT2_8192E BIT22 // Beacon DMA Interrupt 2
#define IMR_BCNDMAINT1_8192E BIT21 // Beacon DMA Interrupt 1
#define IMR_BCNDOK7_8192E BIT20 // Beacon Queue DMA OK Interrup 7
#define IMR_BCNDOK6_8192E BIT19 // Beacon Queue DMA OK Interrup 6
#define IMR_BCNDOK5_8192E BIT18 // Beacon Queue DMA OK Interrup 5
#define IMR_BCNDOK4_8192E BIT17 // Beacon Queue DMA OK Interrup 4
#define IMR_BCNDOK3_8192E BIT16 // Beacon Queue DMA OK Interrup 3
#define IMR_BCNDOK2_8192E BIT15 // Beacon Queue DMA OK Interrup 2
#define IMR_BCNDOK1_8192E BIT14 // Beacon Queue DMA OK Interrup 1
#define IMR_ATIMEND_E_8192E BIT13 // ATIM Window End Extension for Win7
#define IMR_TXERR_8192E BIT11 // Tx Error Flag Interrupt Status, write 1 clear.
#define IMR_RXERR_8192E BIT10 // Rx Error Flag INT Status, Write 1 clear
#define IMR_TXFOVW_8192E BIT9 // Transmit FIFO Overflow
#define IMR_RXFOVW_8192E BIT8 // Receive FIFO Overflow
#define IMR_MCUERR_8192E BIT28 // Beacon DMA Interrupt 7
/*===================================================================
=====================================================================
Here the register defines are for 92C. When the define is as same with 92C,
we will use the 92C's define for the consistency
So the following defines for 92C is not entire!!!!!!
=====================================================================
=====================================================================*/
/*
Based on Datasheet V33---090401
Register Summary
Current IOREG MAP
0x0000h ~ 0x00FFh System Configuration (256 Bytes)
0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes)
0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes)
0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes)
0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes)
0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes)
0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes)
0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes)
0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes)
*/
//----------------------------------------------------------------------------
// 8195 (TXPAUSE) transmission pause (Offset 0x522, 8 bits)
//----------------------------------------------------------------------------
/*
#define StopBecon BIT6
#define StopHigh BIT5
#define StopMgt BIT4
#define StopVO BIT3
#define StopVI BIT2
#define StopBE BIT1
#define StopBK BIT0
*/
//-----------------------------------------------------
//
// 0xFE00h ~ 0xFE55h USB Configuration
//
//-----------------------------------------------------
/*#define REG_USB_INFO 0xFE17
#define REG_USB_SPECIAL_OPTION 0xFE55
#define REG_USB_DMA_AGG_TO 0xFE5B
#define REG_USB_AGG_TO 0xFE5C
#define REG_USB_AGG_TH 0xFE5D
#define REG_USB_HRPWM 0xFE58
#define REG_USB_HCPWM 0xFE57
//2 USB Information (0xFE17)
#define USB_IS_HIGH_SPEED 0
#define USB_IS_FULL_SPEED 1
#define USB_SPEED_MASK BIT(5)
#define USB_NORMAL_SIE_EP_MASK 0xF
#define USB_NORMAL_SIE_EP_SHIFT 4
//2 Special Option
#define USB_AGG_EN BIT(3)
*/
//============================================================================
// 8192C Regsiter Bit and Content definition
//============================================================================
//-----------------------------------------------------
//
// 0x0000h ~ 0x00FFh System Configuration
//
//-----------------------------------------------------
/*
//2 SYS_ISO_CTRL
#define ISO_MD2PP BIT(0)
#define ISO_UA2USB BIT(1)
#define ISO_UD2CORE BIT(2)
#define ISO_PA2PCIE BIT(3)
#define ISO_PD2CORE BIT(4)
#define ISO_IP2MAC BIT(5)
#define ISO_DIOP BIT(6)
#define ISO_DIOE BIT(7)
#define ISO_EB2CORE BIT(8)
#define ISO_DIOR BIT(9)
#define PWC_EV12V BIT(15)
//2 SYS_FUNC_EN
#define FEN_BBRSTB BIT(0)
#define FEN_BB_GLB_RSTn BIT(1)
#define FEN_USBA BIT(2)
#define FEN_UPLL BIT(3)
#define FEN_USBD BIT(4)
#define FEN_DIO_PCIE BIT(5)
#define FEN_PCIEA BIT(6)
#define FEN_PPLL BIT(7)
#define FEN_PCIED BIT(8)
#define FEN_DIOE BIT(9)
#define FEN_CPUEN BIT(10)
#define FEN_DCORE BIT(11)
#define FEN_ELDR BIT(12)
#define FEN_DIO_RF BIT(13)
#define FEN_HWPDN BIT(14)
#define FEN_MREGEN BIT(15)
//2 APS_FSMCO
#define PFM_LDALL BIT(0)
#define PFM_ALDN BIT(1)
#define PFM_LDKP BIT(2)
#define PFM_WOWL BIT(3)
#define EnPDN BIT(4)
#define PDN_PL BIT(5)
#define APFM_ONMAC BIT(8)
#define APFM_OFF BIT(9)
#define APFM_RSM BIT(10)
#define AFSM_HSUS BIT(11)
#define AFSM_PCIE BIT(12)
#define APDM_MAC BIT(13)
#define APDM_HOST BIT(14)
#define APDM_HPDN BIT(15)
#define RDY_MACON BIT(16)
#define SUS_HOST BIT(17)
#define ROP_ALD BIT(20)
#define ROP_PWR BIT(21)
#define ROP_SPS BIT(22)
#define SOP_MRST BIT(25)
#define SOP_FUSE BIT(26)
#define SOP_ABG BIT(27)
#define SOP_AMB BIT(28)
#define SOP_RCK BIT(29)
#define SOP_A8M BIT(30)
#define XOP_BTCK BIT(31)
//2 SYS_CLKR
#define ANAD16V_EN BIT(0)
#define ANA8M BIT(1)
#define MACSLP BIT(4)
#define LOADER_CLK_EN BIT(5)
//2 9346CR
#define BOOT_FROM_EEPROM BIT(4)
#define EEPROM_EN BIT(5)
//2 RF_CTRL
#define RF_EN BIT(0)
#define RF_RSTB BIT(1)
#define RF_SDMRSTB BIT(2)
//2 LDOV12D_CTRL
#define LDV12_EN BIT(0)
#define LDV12_SDBY BIT(1)
#define LPLDO_HSM BIT(2)
#define LPLDO_LSM_DIS BIT(3)
#define _LDV12_VADJ(x) (((x) & 0xF) << 4)
//2 EFUSE_TEST (For RTL8723 partially)
#define EF_TRPT BIT(7)
#define EF_CELL_SEL (BIT(8)|BIT(9)) // 00: Wifi Efuse, 01: BT Efuse0, 10: BT Efuse1, 11: BT Efuse2
#define LDOE25_EN BIT(31)
#define EFUSE_SEL(x) (((x) & 0x3) << 8)
#define EFUSE_SEL_MASK 0x300
#define EFUSE_WIFI_SEL_0 0x0
#define EFUSE_BT_SEL_0 0x1
#define EFUSE_BT_SEL_1 0x2
#define EFUSE_BT_SEL_2 0x3
//2 8051FWDL
//2 MCUFWDL
#define MCUFWDL_EN BIT(0)
#define MCUFWDL_RDY BIT(1)
#define FWDL_ChkSum_rpt BIT(2)
#define MACINI_RDY BIT(3)
#define BBINI_RDY BIT(4)
#define RFINI_RDY BIT(5)
#define WINTINI_RDY BIT(6)
#define RAM_DL_SEL BIT(7)
#define ROM_DLEN BIT(19)
#define CPRST BIT(23)
//2 REG_SYS_CFG
#define XCLK_VLD BIT(0)
#define ACLK_VLD BIT(1)
#define UCLK_VLD BIT(2)
#define PCLK_VLD BIT(3)
#define PCIRSTB BIT(4)
#define V15_VLD BIT(5)
#define TRP_B15V_EN BIT(7)
#define SIC_IDLE BIT(8)
#define BD_MAC2 BIT(9)
#define BD_MAC1 BIT(10)
#define IC_MACPHY_MODE BIT(11)
#define CHIP_VER (BIT(12)|BIT(13)|BIT(14)|BIT(15))
#define BT_FUNC BIT(16)
#define VENDOR_ID BIT(19)
#define PAD_HWPD_IDN BIT(22)
#define TRP_VAUX_EN BIT(23) // RTL ID
#define TRP_BT_EN BIT(24)
#define BD_PKG_SEL BIT(25)
#define BD_HCI_SEL BIT(26)
#define TYPE_ID BIT(27)
#define CHIP_VER_RTL_MASK 0xF000 //Bit 12 ~ 15
#define CHIP_VER_RTL_SHIFT 12
*/
//-----------------------------------------------------
//
// 0x0100h ~ 0x01FFh MACTOP General Configuration
//
//-----------------------------------------------------
/*
//2 Function Enable Registers
//2 CR 0x0100-0x0103
#define HCI_TXDMA_EN BIT(0)
#define HCI_RXDMA_EN BIT(1)
#define TXDMA_EN BIT(2)
#define RXDMA_EN BIT(3)
#define PROTOCOL_EN BIT(4)
#define SCHEDULE_EN BIT(5)
#define MACTXEN BIT(6)
#define MACRXEN BIT(7)
#define ENSWBCN BIT(8)
#define ENSEC BIT(9)
#define CALTMR_EN BIT(10) // 32k CAL TMR enable
// Network type
#define _NETTYPE(x) (((x) & 0x3) << 16)
#define MASK_NETTYPE 0x30000
#define NT_NO_LINK 0x0
#define NT_LINK_AD_HOC 0x1
#define NT_LINK_AP 0x2
#define NT_AS_AP 0x3
//2 PBP - Page Size Register 0x0104
#define GET_RX_PAGE_SIZE(value) ((value) & 0xF)
#define GET_TX_PAGE_SIZE(value) (((value) & 0xF0) >> 4)
#define _PSRX_MASK 0xF
#define _PSTX_MASK 0xF0
#define _PSRX(x) (x)
#define _PSTX(x) ((x) << 4)
#define PBP_64 0x0
#define PBP_128 0x1
#define PBP_256 0x2
#define PBP_512 0x3
#define PBP_1024 0x4
//2 TX/RXDMA 0x010C
#define RXDMA_ARBBW_EN BIT(0)
#define RXSHFT_EN BIT(1)
#define RXDMA_AGG_EN BIT(2)
#define QS_VO_QUEUE BIT(8)
#define QS_VI_QUEUE BIT(9)
#define QS_BE_QUEUE BIT(10)
#define QS_BK_QUEUE BIT(11)
#define QS_MANAGER_QUEUE BIT(12)
#define QS_HIGH_QUEUE BIT(13)
#define HQSEL_VOQ BIT(0)
#define HQSEL_VIQ BIT(1)
#define HQSEL_BEQ BIT(2)
#define HQSEL_BKQ BIT(3)
#define HQSEL_MGTQ BIT(4)
#define HQSEL_HIQ BIT(5)
// For normal driver, 0x10C
#define _TXDMA_HIQ_MAP(x) (((x)&0x3) << 14)
#define _TXDMA_MGQ_MAP(x) (((x)&0x3) << 12)
#define _TXDMA_BKQ_MAP(x) (((x)&0x3) << 10)
#define _TXDMA_BEQ_MAP(x) (((x)&0x3) << 8 )
#define _TXDMA_VIQ_MAP(x) (((x)&0x3) << 6 )
#define _TXDMA_VOQ_MAP(x) (((x)&0x3) << 4 )
#define QUEUE_LOW 1
#define QUEUE_NORMAL 2
#define QUEUE_HIGH 3
//2 REG_C2HEVT_CLEAR 0x01AF
#define C2H_EVT_HOST_CLOSE 0x00 // Set by driver and notify FW that the driver has read the C2H command message
#define C2H_EVT_FW_CLOSE 0xFF // Set by FW indicating that FW had set the C2H command message and it's not yet read by driver.
//2 LLT_INIT 0x01E0
#define _LLT_NO_ACTIVE 0x0
#define _LLT_WRITE_ACCESS 0x1
#define _LLT_READ_ACCESS 0x2
#define _LLT_INIT_DATA(x) ((x) & 0xFF)
#define _LLT_INIT_ADDR(x) (((x) & 0xFF) << 8)
#define _LLT_OP(x) (((x) & 0x3) << 30)
#define _LLT_OP_VALUE(x) (((x) >> 30) & 0x3)
*/
//-----------------------------------------------------
//
// 0x0200h ~ 0x027Fh TXDMA Configuration
//
//-----------------------------------------------------
/*
//2 TDECTL 0x0208
#define BLK_DESC_NUM_SHIFT 4
#define BLK_DESC_NUM_MASK 0xF
//2 TXDMA_OFFSET_CHK 0x020C
#define DROP_DATA_EN BIT(9)
*/
//-----------------------------------------------------
//
// 0x0280h ~ 0x028Bh RX DMA Configuration
//
//-----------------------------------------------------
/*
//2 REG_RXDMA_CONTROL, 0x0286h
// Write only. When this bit is set, RXDMA will decrease RX PKT counter by one. Before
// this bit is polled, FW shall update RXFF_RD_PTR first. This register is write pulse and auto clear.
#define RXPKT_RELEASE_POLL BIT(0)
// Read only. When RXMA finishes on-going DMA operation, RXMDA will report idle state in
// this bit. FW can start releasing packets after RXDMA entering idle mode.
#define RXDMA_IDLE BIT(1)
// When this bit is set, RXDMA will enter this mode after on-going RXDMA packet to host
// completed, and stop DMA packet to host. RXDMA will then report Default: 0;
#define RW_RELEASE_EN BIT(2)
*/
//-----------------------------------------------------
//
// 0x0400h ~ 0x047Fh Protocol Configuration
//
//-----------------------------------------------------
/*
//2 FWHW_TXQ_CTRL 0x0420
#define EN_AMPDU_RTY_NEW BIT(7)
//2 REG_LIFECTRL_CTRL 0x0426
#define HAL92C_EN_PKT_LIFE_TIME_BK BIT3
#define HAL92C_EN_PKT_LIFE_TIME_BE BIT2
#define HAL92C_EN_PKT_LIFE_TIME_VI BIT1
#define HAL92C_EN_PKT_LIFE_TIME_VO BIT0
#define HAL92C_MSDU_LIFE_TIME_UNIT 128 // in us, said by Tim.
//2 SPEC SIFS 0x0428
#define _SPEC_SIFS_CCK(x) ((x) & 0xFF)
#define _SPEC_SIFS_OFDM(x) (((x) & 0xFF) << 8)
//2 RL 0x042A
#define RETRY_LIMIT_SHORT_SHIFT 8
#define RETRY_LIMIT_LONG_SHIFT 0
#define _LRL(x) ((x) & 0x3F)
#define _SRL(x) (((x) & 0x3F) << 8)
*/
//-----------------------------------------------------
//
// 0x0500h ~ 0x05FFh EDCA Configuration
//
//-----------------------------------------------------
/*
//2 EDCA setting 0x050C
#define AC_PARAM_TXOP_LIMIT_OFFSET 16
#define AC_PARAM_ECW_MAX_OFFSET 12
#define AC_PARAM_ECW_MIN_OFFSET 8
#define AC_PARAM_AIFS_OFFSET 0
//2 BCN_CTRL 0x0550
#define EN_TXBCN_RPT BIT(2)
#define EN_BCN_FUNCTION BIT(3)
//2 TxPause 0x0522
#define STOP_BCNQ BIT(6)
*/
//2 ACMHWCTRL 0x05C0
#define AcmHw_HwEn_8192E BIT(0)
#define AcmHw_VoqEn_8192E BIT(1)
#define AcmHw_ViqEn_8192E BIT(2)
#define AcmHw_BeqEn_8192E BIT(3)
#define AcmHw_VoqStatus_8192E BIT(5)
#define AcmHw_ViqStatus_8192E BIT(6)
#define AcmHw_BeqStatus_8192E BIT(7)
//-----------------------------------------------------
//
// 0x0600h ~ 0x07FFh WMAC Configuration
//
//-----------------------------------------------------
/*
//2 TCR 0x0604
#define DIS_GCLK BIT(1)
#define PAD_SEL BIT(2)
#define PWR_ST BIT(6)
#define PWRBIT_OW_EN BIT(7)
#define ACRC BIT(8)
#define CFENDFORM BIT(9)
#define ICV BIT(10)
*/
//----------------------------------------------------------------------------
// 8195 (RCR) Receive Configuration Register (Offset 0x608, 32 bits)
//----------------------------------------------------------------------------
/*
#define RCR_APPFCS BIT31 // WMAC append FCS after pauload
#define RCR_APP_MIC BIT30 // MACRX will retain the MIC at the bottom of the packet.
#define RCR_APP_ICV BIT29 // MACRX will retain the ICV at the bottom of the packet.
#define RCR_APP_PHYST_RXFF BIT28 // HY Status is appended before RX packet in RXFF
#define RCR_APP_BA_SSN BIT27 // SSN of previous TXBA is appended as after original RXDESC as the 4-th DW of RXDESC.
#define RCR_RSVD_BIT26 BIT26 // Reserved
*/
#define RCR_TCPOFLD_EN BIT25 // Enable TCP checksum offload
/*#define RCR_ENMBID BIT24 // Enable Multiple BssId. Only response ACK to the packets whose DID(A1) matching to the addresses in the MBSSID CAM Entries.
#define RCR_LSIGEN BIT23 // Enable LSIG TXOP Protection function. Search KEYCAM for each rx packet to check if LSIGEN bit is set.
#define RCR_MFBEN BIT22 // Enable immediate MCS Feedback function. When Rx packet with MRQ = 1'b1, then search KEYCAM to find sender's MCS Feedback function and send response.
*/
/*#define RCR_RSVD_BIT19 BIT19 // Reserved
#define RCR_TIM_PARSER_EN BIT18 // RX Beacon TIM Parser.
#define RCR_BM_DATA_EN BIT17 // Broadcast data packet interrupt enable.
#define RCR_UC_DATA_EN BIT16 // Unicast data packet interrupt enable.
*/
/*#define RCR_HTC_LOC_CTRL BIT14 // MFC<--HTC=1 MFC-->HTC=0
#define RCR_AMF BIT13 // Accept management type frame
#define RCR_ACF BIT12 // Accept control type frame. Control frames BA, BAR, and PS-Poll (when in AP mode) are not controlled by this bit. They are controlled by ADF.
#define RCR_ADF BIT11 // Accept data type frame. This bit also regulates BA, BAR, and PS-Poll (AP mode only).
*/
/*#define RCR_AICV BIT9 // Accept ICV error packet
#define RCR_ACRC32 BIT8 // Accept CRC32 error packet
#define RCR_CBSSID_BCN BIT7 // Accept BSSID match packet (Rx beacon, probe rsp)
#define RCR_CBSSID_DATA BIT6 // Accept BSSID match packet (Data)
#define RCR_CBSSID RCR_CBSSID_DATA // Accept BSSID match packet
#define RCR_APWRMGT BIT5 // Accept power management packet
#define RCR_ADD3 BIT4 // Accept address 3 match packet
#define RCR_AB BIT3 // Accept broadcast packet
#define RCR_AM BIT2 // Accept multicast packet
#define RCR_APM BIT1 // Accept physical match packet
#define RCR_AAP BIT0 // Accept all unicast packet
#define AAP BIT(0)
#define APM BIT(1)
#define AM BIT(2)
#define AB BIT(3)
#define ADD3 BIT(4)
#define APWRMGT BIT(5)
#define CBSSID BIT(6)
#define CBSSID_DATA BIT(6)
#define CBSSID_BCN BIT(7)
#define ACRC32 BIT(8)
#define AICV BIT(9)
#define ADF BIT(11)
#define ACF BIT(12)
#define AMF BIT(13)
#define HTC_LOC_CTRL BIT(14)
#define UC_DATA_EN BIT(16)
#define BM_DATA_EN BIT(17)
#define MFBEN BIT(22)
#define LSIGEN BIT(23)
#define EnMBID BIT(24)
#define APP_BASSN BIT(27)
#define APP_PHYSTS BIT(28)
#define APP_ICV BIT(29)
#define APP_MIC BIT(30)
*/
//----------------------------------------------------------------------------
// 8195 CAM Config Setting (offset 0x680, 1 byte)
//----------------------------------------------------------------------------
/*
#define SCR_TxUseDK BIT(0) //Force Tx Use Default Key
#define SCR_RxUseDK BIT(1) //Force Rx Use Default Key
#define SCR_TxEncEnable BIT(2) //Enable Tx Encryption
#define SCR_RxDecEnable BIT(3) //Enable Rx Decryption
#define SCR_SKByA2 BIT(4) //Search kEY BY A2
#define SCR_NoSKMC BIT(5) //No Key Search Multicast
#define SCR_TXBCUSEDK BIT(6) // Force Tx Broadcast packets Use Default Key
#define SCR_RXBCUSEDK BIT(7) // Force Rx Broadcast packets Use Default Key
#define CAM_NONE 0x0
#define CAM_WEP40 0x01
#define CAM_TKIP 0x02
#define CAM_AES 0x04
#define CAM_WEP104 0x05
#define CAM_SMS4 0x6
#define TOTAL_CAM_ENTRY 32
#define HALF_CAM_ENTRY 16
#define CAM_CONFIG_USEDK TRUE
#define CAM_CONFIG_NO_USEDK FALSE
#define SCR_UseDK 0x01
#define SCR_TxSecEnable 0x02
#define SCR_RxSecEnable 0x04
*/
//-----------------------------------------------------
//
// 0xFE00h ~ 0xFE55h RTL8723 SDIO Configuration
//
//-----------------------------------------------------
/*
//SDIO host local register space mapping.
#define SDIO_LOCAL_MSK 0x0FFF
#define WLAN_IOREG_MSK 0x7FFF
#define WLAN_FIFO_MSK 0x1FFF // Aggregation Length[12:0]
#define SDIO_WITHOUT_REF_DEVICE_ID 0 // Without reference to the SDIO Device ID
#define SDIO_LOCAL_DEVICE_ID 0 // 0b[16], 000b[15:13]
#define WLAN_TX_HIQ_DEVICE_ID 4 // 0b[16], 100b[15:13]
#define WLAN_TX_MIQ_DEVICE_ID 5 // 0b[16], 101b[15:13]
#define WLAN_TX_LOQ_DEVICE_ID 6 // 0b[16], 110b[15:13]
#define WLAN_RX0FF_DEVICE_ID 7 // 0b[16], 111b[15:13]
#define WLAN_IOREG_DEVICE_ID 8 // 1b[16]
//SDIO Tx Free Page Index
#define HI_QUEUE_IDX 0
#define MID_QUEUE_IDX 1
#define LOW_QUEUE_IDX 2
#define PUBLIC_QUEUE_IDX 3
#define SDIO_REG_TX_CTRL 0x0000 // SDIO Tx Control
#define SDIO_REG_HIMR 0x0014 // SDIO Host Interrupt Mask
#define SDIO_REG_HISR 0x0018 // SDIO Host Interrupt Service Routine
#define SDIO_REG_HCPWM 0x0019 // HCI Current Power Mode
#define SDIO_REG_RX0_REQ_LEN 0x001C // RXDMA Request Length
#define SDIO_REG_FREE_TXPG 0x0020 // Free Tx Buffer Page
#define SDIO_REG_HCPWM1 0x0024 // HCI Current Power Mode 1
#define SDIO_REG_HCPWM2 0x0026 // HCI Current Power Mode 2
#define SDIO_REG_HTSFR_INFO 0x0030 // HTSF Informaion
#define SDIO_REG_HRPWM1 0x0080 // HCI Request Power Mode 1
#define SDIO_REG_HRPWM2 0x0082 // HCI Request Power Mode 2
#define SDIO_REG_HPS_CLKR 0x0084 // HCI Power Save Clock
#define SDIO_REG_HSUS_CTRL 0x0086 // SDIO HCI Suspend Control
#define SDIO_REG_HIMR_ON 0x0090 //SDIO Host Extension Interrupt Mask Always
#define SDIO_REG_HISR_ON 0x0091 //SDIO Host Extension Interrupt Status Always
#define SDIO_HIMR_DISABLED 0
// RTL8723/RTL8188E SDIO Host Interrupt Mask Register
#define SDIO_HIMR_RX_REQUEST_MSK BIT0
#define SDIO_HIMR_AVAL_MSK BIT1
#define SDIO_HIMR_TXERR_MSK BIT2
#define SDIO_HIMR_RXERR_MSK BIT3
#define SDIO_HIMR_TXFOVW_MSK BIT4
#define SDIO_HIMR_RXFOVW_MSK BIT5
#define SDIO_HIMR_TXBCNOK_MSK BIT6
#define SDIO_HIMR_TXBCNERR_MSK BIT7
#define SDIO_HIMR_BCNERLY_INT_MSK BIT16
#define SDIO_HIMR_C2HCMD_MSK BIT17
#define SDIO_HIMR_CPWM1_MSK BIT18
#define SDIO_HIMR_CPWM2_MSK BIT19
#define SDIO_HIMR_HSISR_IND_MSK BIT20
#define SDIO_HIMR_GTINT3_IND_MSK BIT21
#define SDIO_HIMR_GTINT4_IND_MSK BIT22
#define SDIO_HIMR_PSTIMEOUT_MSK BIT23
#define SDIO_HIMR_OCPINT_MSK BIT24
#define SDIO_HIMR_ATIMEND_MSK BIT25
#define SDIO_HIMR_ATIMEND_E_MSK BIT26
#define SDIO_HIMR_CTWEND_MSK BIT27
//RTL8188E SDIO Specific
#define SDIO_HIMR_MCU_ERR_MSK BIT28
#define SDIO_HIMR_TSF_BIT32_TOGGLE_MSK BIT29
// SDIO Host Interrupt Service Routine
#define SDIO_HISR_RX_REQUEST BIT0
#define SDIO_HISR_AVAL BIT1
#define SDIO_HISR_TXERR BIT2
#define SDIO_HISR_RXERR BIT3
#define SDIO_HISR_TXFOVW BIT4
#define SDIO_HISR_RXFOVW BIT5
#define SDIO_HISR_TXBCNOK BIT6
#define SDIO_HISR_TXBCNERR BIT7
#define SDIO_HISR_BCNERLY_INT BIT16
#define SDIO_HISR_C2HCMD BIT17
#define SDIO_HISR_CPWM1 BIT18
#define SDIO_HISR_CPWM2 BIT19
#define SDIO_HISR_HSISR_IND BIT20
#define SDIO_HISR_GTINT3_IND BIT21
#define SDIO_HISR_GTINT4_IND BIT22
#define SDIO_HISR_PSTIMEOUT BIT23
#define SDIO_HISR_OCPINT BIT24
#define SDIO_HISR_ATIMEND BIT25
#define SDIO_HISR_ATIMEND_E BIT26
#define SDIO_HISR_CTWEND BIT27
//RTL8188E SDIO Specific
#define SDIO_HISR_MCU_ERR BIT28
#define SDIO_HISR_TSF_BIT32_TOGGLE BIT29
// SDIO HCI Suspend Control Register
#define HCI_RESUME_PWR_RDY BIT1
#define HCI_SUS_CTRL BIT0
#if DEV_BUS_TYPE == RT_SDIO_INTERFACE
#define MAX_TX_AGG_PACKET_NUMBER 0x8
#else
#define MAX_TX_AGG_PACKET_NUMBER 0xFF
#endif
*/
#endif // #ifndef __INC_HAL8192EREG_H
Reference in New Issue View Git Blame Copy Permalink