rtl8192eu-linux-driver/include/rtl8192e_spec.h
Magnus Bergmark 1387cf623d
The official RTL8192EU linux driver from D-Link Australia
Version information: 20140812_rtl8192EU_linux_v4.3.1.1_11320
  2014-08-12
  version 4.3.1.1_11320
Source:
  ftp://files.dlink.com.au/products/DWA-131/REV_E/Drivers/DWA-131_Linux_driver_v4.3.1.1.zip

This version does not currently work on newer kernels, but it does
contain USB ID 2001:3319, which a lot of other repos in GitHub does not.
2015-08-18 21:03:11 +02:00

254 lines
10 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*******************************************************************************/
#ifndef __RTL8192E_SPEC_H__
#define __RTL8192E_SPEC_H__
#include <drv_conf.h>
//============================================================
// 8192E Regsiter offset definition
//============================================================
//============================================================
//
//============================================================
//-----------------------------------------------------
//
// 0x0000h ~ 0x00FFh System Configuration
//
//-----------------------------------------------------
#define REG_AFE_CTRL1_8192E 0x0024
#define REG_AFE_CTRL2_8192E 0x0028
#define REG_AFE_CTRL3_8192E 0x002c
#define REG_SDIO_CTRL_8192E 0x0070
#define REG_OPT_CTRL_8192E 0x0074
#define REG_RF_B_CTRL_8192E 0x0076
#define REG_AFE_CTRL4_8192E 0x0078
#define REG_LDO_SWR_CTRL 0x007C
#define REG_FW_DRV_MSG_8192E 0x0088
#define REG_HMEBOX_E2_E3_8192E 0x008C
#define REG_HIMR0_8192E 0x00B0
#define REG_HISR0_8192E 0x00B4
#define REG_HIMR1_8192E 0x00B8
#define REG_HISR1_8192E 0x00BC
#define REG_SYS_CFG1_8192E 0x00F0
#define REG_SYS_CFG2_8192E 0x00FC
//-----------------------------------------------------
//
// 0x0100h ~ 0x01FFh MACTOP General Configuration
//
//-----------------------------------------------------
#define REG_PKTBUF_DBG_ADDR (REG_PKTBUF_DBG_CTRL)
#define REG_RXPKTBUF_DBG (REG_PKTBUF_DBG_CTRL+2)
#define REG_TXPKTBUF_DBG (REG_PKTBUF_DBG_CTRL+3)
#define REG_WOWLAN_WAKE_REASON REG_MCUTST_WOWLAN
#define REG_RSVD3_8192E 0x0168
#define REG_C2HEVT_CMD_SEQ_88XX 0x01A1
#define REG_C2hEVT_CMD_CONTENT_88XX 0x01A2
#define REG_C2HEVT_CMD_LEN_88XX 0x01AE
#define REG_HMEBOX_EXT0_8192E 0x01F0
#define REG_HMEBOX_EXT1_8192E 0x01F4
#define REG_HMEBOX_EXT2_8192E 0x01F8
#define REG_HMEBOX_EXT3_8192E 0x01FC
//-----------------------------------------------------
//
// 0x0200h ~ 0x027Fh TXDMA Configuration
//
//-----------------------------------------------------
//-----------------------------------------------------
//
// 0x0280h ~ 0x02FFh RXDMA Configuration
//
//-----------------------------------------------------
#define REG_RXDMA_8192E 0x0290
#define REG_EARLY_MODE_CONTROL_8192E 0x02BC
#define REG_RSVD5_8192E 0x02F0
#define REG_RSVD6_8192E 0x02F4
#define REG_RSVD7_8192E 0x02F8
#define REG_RSVD8_8192E 0x02FC
//-----------------------------------------------------
//
// 0x0300h ~ 0x03FFh PCIe
//
//-----------------------------------------------------
#define REG_PCIE_MULTIFET_CTRL_8192E 0x036A //PCIE Multi-Fethc Control
//-----------------------------------------------------
//
// 0x0400h ~ 0x047Fh Protocol Configuration
//
//-----------------------------------------------------
#define REG_TXBF_CTRL_8192E 0x042C
#define REG_ARFR1_8192E 0x044C
#define REG_CCK_CHECK_8192E 0x0454
#define REG_AMPDU_MAX_TIME_8192E 0x0456
#define REG_BCNQ1_BDNY_8192E 0x0457
#define REG_AMPDU_MAX_LENGTH_8192E 0x0458
#define REG_NDPA_OPT_CTRL_8192E 0x045F
#define REG_DATA_SC_8192E 0x0483
#define REG_TXRPT_START_OFFSET 0x04AC
#define REG_AMPDU_BURST_MODE_8192E 0x04BC
#define REG_HT_SINGLE_AMPDU_8192E 0x04C7
#define REG_MACID_PKT_DROP0_8192E 0x04D0
//-----------------------------------------------------
//
// 0x0500h ~ 0x05FFh EDCA Configuration
//
//-----------------------------------------------------
#define REG_CTWND_8192E 0x0572
#define REG_SECONDARY_CCA_CTRL_8192E 0x0577
#define REG_SCH_TXCMD_8192E 0x05F8
//-----------------------------------------------------
//
// 0x0600h ~ 0x07FFh WMAC Configuration
//
//-----------------------------------------------------
#define REG_MAC_CR_8192E 0x0600
#define REG_MAC_TX_SM_STATE_8192E 0x06B4
// Power
#define REG_BFMER0_INFO_8192E 0x06E4
#define REG_BFMER1_INFO_8192E 0x06EC
#define REG_CSI_RPT_PARAM_BW20_8192E 0x06F4
#define REG_CSI_RPT_PARAM_BW40_8192E 0x06F8
#define REG_CSI_RPT_PARAM_BW80_8192E 0x06FC
// Hardware Port 2
#define REG_BFMEE_SEL_8192E 0x0714
#define REG_SND_PTCL_CTRL_8192E 0x0718
//-----------------------------------------------------
//
// Redifine register definition for compatibility
//
//-----------------------------------------------------
// TODO: use these definition when using REG_xxx naming rule.
// NOTE: DO NOT Remove these definition. Use later.
#define ISR_8192E REG_HISR0_8192E
//----------------------------------------------------------------------------
// 8192E IMR/ISR bits (offset 0xB0, 8bits)
//----------------------------------------------------------------------------
#define IMR_DISABLED_8192E 0
// IMR DW0(0x00B0-00B3) Bit 0-31
#define IMR_TIMER2_8192E BIT31 // Timeout interrupt 2
#define IMR_TIMER1_8192E BIT30 // Timeout interrupt 1
#define IMR_PSTIMEOUT_8192E BIT29 // Power Save Time Out Interrupt
#define IMR_GTINT4_8192E BIT28 // When GTIMER4 expires, this bit is set to 1
#define IMR_GTINT3_8192E BIT27 // When GTIMER3 expires, this bit is set to 1
#define IMR_TXBCN0ERR_8192E BIT26 // Transmit Beacon0 Error
#define IMR_TXBCN0OK_8192E BIT25 // Transmit Beacon0 OK
#define IMR_TSF_BIT32_TOGGLE_8192E BIT24 // TSF Timer BIT32 toggle indication interrupt
#define IMR_BCNDMAINT0_8192E BIT20 // Beacon DMA Interrupt 0
#define IMR_BCNDERR0_8192E BIT16 // Beacon Queue DMA OK0
#define IMR_HSISR_IND_ON_INT_8192E BIT15 // HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1)
#define IMR_BCNDMAINT_E_8192E BIT14 // Beacon DMA Interrupt Extension for Win7
#define IMR_ATIMEND_8192E BIT12 // CTWidnow End or ATIM Window End
#define IMR_C2HCMD_8192E BIT10 // CPU to Host Command INT Status, Write 1 clear
#define IMR_CPWM2_8192E BIT9 // CPU power Mode exchange INT Status, Write 1 clear
#define IMR_CPWM_8192E BIT8 // CPU power Mode exchange INT Status, Write 1 clear
#define IMR_HIGHDOK_8192E BIT7 // High Queue DMA OK
#define IMR_MGNTDOK_8192E BIT6 // Management Queue DMA OK
#define IMR_BKDOK_8192E BIT5 // AC_BK DMA OK
#define IMR_BEDOK_8192E BIT4 // AC_BE DMA OK
#define IMR_VIDOK_8192E BIT3 // AC_VI DMA OK
#define IMR_VODOK_8192E BIT2 // AC_VO DMA OK
#define IMR_RDU_8192E BIT1 // Rx Descriptor Unavailable
#define IMR_ROK_8192E BIT0 // Receive DMA OK
// IMR DW1(0x00B4-00B7) Bit 0-31
#define IMR_BCNDMAINT7_8192E BIT27 // Beacon DMA Interrupt 7
#define IMR_BCNDMAINT6_8192E BIT26 // Beacon DMA Interrupt 6
#define IMR_BCNDMAINT5_8192E BIT25 // Beacon DMA Interrupt 5
#define IMR_BCNDMAINT4_8192E BIT24 // Beacon DMA Interrupt 4
#define IMR_BCNDMAINT3_8192E BIT23 // Beacon DMA Interrupt 3
#define IMR_BCNDMAINT2_8192E BIT22 // Beacon DMA Interrupt 2
#define IMR_BCNDMAINT1_8192E BIT21 // Beacon DMA Interrupt 1
#define IMR_BCNDOK7_8192E BIT20 // Beacon Queue DMA OK Interrup 7
#define IMR_BCNDOK6_8192E BIT19 // Beacon Queue DMA OK Interrup 6
#define IMR_BCNDOK5_8192E BIT18 // Beacon Queue DMA OK Interrup 5
#define IMR_BCNDOK4_8192E BIT17 // Beacon Queue DMA OK Interrup 4
#define IMR_BCNDOK3_8192E BIT16 // Beacon Queue DMA OK Interrup 3
#define IMR_BCNDOK2_8192E BIT15 // Beacon Queue DMA OK Interrup 2
#define IMR_BCNDOK1_8192E BIT14 // Beacon Queue DMA OK Interrup 1
#define IMR_ATIMEND_E_8192E BIT13 // ATIM Window End Extension for Win7
#define IMR_TXERR_8192E BIT11 // Tx Error Flag Interrupt Status, write 1 clear.
#define IMR_RXERR_8192E BIT10 // Rx Error Flag INT Status, Write 1 clear
#define IMR_TXFOVW_8192E BIT9 // Transmit FIFO Overflow
#define IMR_RXFOVW_8192E BIT8 // Receive FIFO Overflow
//----------------------------------------------------------------------------
// 8192E Auto LLT bits (offset 0x224, 8bits)
//----------------------------------------------------------------------------
//224 REG_AUTO_LLT
// move to hal_com_reg.h
//----------------------------------------------------------------------------
// 8192E Auto LLT bits (offset 0x290, 32bits)
//----------------------------------------------------------------------------
#define BIT_DMA_MODE BIT1
#define BIT_USB_RXDMA_AGG_EN BIT31
//----------------------------------------------------------------------------
// 8192E REG_SYS_CFG1 (offset 0xF0, 32bits)
//----------------------------------------------------------------------------
#define BIT_SPSLDO_SEL BIT24
//----------------------------------------------------------------------------
// 8192E REG_CCK_CHECK (offset 0x454, 8bits)
//----------------------------------------------------------------------------
#define BIT_BCN_PORT_SEL BIT5
//============================================================================
// Regsiter Bit and Content definition
//============================================================================
//2 ACMHWCTRL 0x05C0
#define AcmHw_HwEn_8192E BIT(0)
#define AcmHw_VoqEn_8192E BIT(1)
#define AcmHw_ViqEn_8192E BIT(2)
#define AcmHw_BeqEn_8192E BIT(3)
#define AcmHw_VoqStatus_8192E BIT(5)
#define AcmHw_ViqStatus_8192E BIT(6)
#define AcmHw_BeqStatus_8192E BIT(7)
#endif //__RTL8192E_SPEC_H__