rtl8192eu-linux-driver/include/rtw_vht.h
Magnus Bergmark 1387cf623d
The official RTL8192EU linux driver from D-Link Australia
Version information: 20140812_rtl8192EU_linux_v4.3.1.1_11320
  2014-08-12
  version 4.3.1.1_11320
Source:
  ftp://files.dlink.com.au/products/DWA-131/REV_E/Drivers/DWA-131_Linux_driver_v4.3.1.1.zip

This version does not currently work on newer kernels, but it does
contain USB ID 2001:3319, which a lot of other repos in GitHub does not.
2015-08-18 21:03:11 +02:00

135 lines
8.1 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef _RTW_VHT_H_
#define _RTW_VHT_H_
#define LDPC_VHT_ENABLE_RX BIT0
#define LDPC_VHT_ENABLE_TX BIT1
#define LDPC_VHT_TEST_TX_ENABLE BIT2
#define LDPC_VHT_CAP_TX BIT3
#define STBC_VHT_ENABLE_RX BIT0
#define STBC_VHT_ENABLE_TX BIT1
#define STBC_VHT_TEST_TX_ENABLE BIT2
#define STBC_VHT_CAP_TX BIT3
#define BEAMFORMING_VHT_BEAMFORMER_ENABLE BIT0 // Declare our NIC supports beamformer
#define BEAMFORMING_VHT_BEAMFORMEE_ENABLE BIT1 // Declare our NIC supports beamformee
#define BEAMFORMING_VHT_BEAMFORMER_TEST BIT2 // Transmiting Beamforming no matter the target supports it or not
//VHT capability info
#define SET_VHT_CAPABILITY_ELE_MAX_MPDU_LENGTH(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 0, 2, _val)
#define SET_VHT_CAPABILITY_ELE_CHL_WIDTH(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 2, 2, _val)
#define SET_VHT_CAPABILITY_ELE_RX_LDPC(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 4, 1, _val)
#define SET_VHT_CAPABILITY_ELE_SHORT_GI80M(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 5, 1, _val)
#define SET_VHT_CAPABILITY_ELE_SHORT_GI160M(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 6, 1, _val)
#define SET_VHT_CAPABILITY_ELE_TX_STBC(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 7, 1, _val)
#define SET_VHT_CAPABILITY_ELE_RX_STBC(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+1, 0, 3, _val)
#define SET_VHT_CAPABILITY_ELE_SU_BFER(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+1, 3, 1, _val)
#define SET_VHT_CAPABILITY_ELE_SU_BFEE(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+1, 4, 1, _val)
#define SET_VHT_CAPABILITY_ELE_BFER_ANT_SUPP(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+1, 5, 3, _val)
#define SET_VHT_CAPABILITY_ELE_SOUNDING_DIMENSIONS(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+2, 0, 3, _val)
#define SET_VHT_CAPABILITY_ELE_MU_BFER(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+2, 3, 1, _val)
#define SET_VHT_CAPABILITY_ELE_MU_BFEE(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+2, 4, 1, _val)
#define SET_VHT_CAPABILITY_ELE_TXOP_PS(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+2, 5, 1, _val)
#define SET_VHT_CAPABILITY_ELE_HTC_VHT(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+2, 6, 1, _val)
#define SET_VHT_CAPABILITY_ELE_MAX_RXAMPDU_FACTOR(_pEleStart, _val) SET_BITS_TO_LE_2BYTE((_pEleStart)+2, 7, 3, _val) //B23~B25
#define SET_VHT_CAPABILITY_ELE_LINK_ADAPTION(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+2, 2, 2, _val)
#define SET_VHT_CAPABILITY_ELE_MCS_RX_MAP(_pEleStart, _val) SET_BITS_TO_LE_2BYTE_16BIT((_pEleStart)+4, 0, 16, _val) //B0~B15 indicate Rx MCS MAP, we write 0 to indicate MCS0~7. by page
#define SET_VHT_CAPABILITY_ELE_MCS_RX_HIGHEST_RATE(_pEleStart, _val) SET_BITS_TO_LE_2BYTE((_pEleStart)+6, 0, 13, _val)
#define SET_VHT_CAPABILITY_ELE_MCS_TX_MAP(_pEleStart, _val) SET_BITS_TO_LE_2BYTE_16BIT((_pEleStart)+8, 0, 16, _val) //B0~B15 indicate Tx MCS MAP, we write 0 to indicate MCS0~7. by page
#define SET_VHT_CAPABILITY_ELE_MCS_TX_HIGHEST_RATE(_pEleStart, _val) SET_BITS_TO_LE_2BYTE((_pEleStart)+10, 0, 13, _val)
#define GET_VHT_CAPABILITY_ELE_MAX_MPDU_LENGTH(_pEleStart) LE_BITS_TO_1BYTE(_pEleStart, 0, 2)
#define GET_VHT_CAPABILITY_ELE_CHL_WIDTH(_pEleStart) LE_BITS_TO_1BYTE(_pEleStart, 2, 2)
#define GET_VHT_CAPABILITY_ELE_RX_LDPC(_pEleStart) LE_BITS_TO_1BYTE(_pEleStart, 4, 1)
#define GET_VHT_CAPABILITY_ELE_SHORT_GI80M(_pEleStart) LE_BITS_TO_1BYTE(_pEleStart, 5, 1)
#define GET_VHT_CAPABILITY_ELE_SHORT_GI160M(_pEleStart) LE_BITS_TO_1BYTE(_pEleStart, 6, 1)
#define GET_VHT_CAPABILITY_ELE_TX_STBC(_pEleStart) LE_BITS_TO_1BYTE(_pEleStart, 7, 1)
#define GET_VHT_CAPABILITY_ELE_RX_STBC(_pEleStart) LE_BITS_TO_1BYTE((_pEleStart)+1, 0, 3)
#define GET_VHT_CAPABILITY_ELE_SU_BFER(_pEleStart) LE_BITS_TO_1BYTE((_pEleStart)+1, 3, 1)
#define GET_VHT_CAPABILITY_ELE_SU_BFEE(_pEleStart) LE_BITS_TO_1BYTE((_pEleStart)+1, 4, 1)
#define GET_VHT_CAPABILITY_ELE_TXOP_PS(_pEleStart) LE_BITS_TO_1BYTE((_pEleStart)+2, 5, 1)
#define GET_VHT_CAPABILITY_ELE_MAX_RXAMPDU_FACTOR(_pEleStart) LE_BITS_TO_2BYTE((_pEleStart)+2, 7, 3)
#define GET_VHT_CAPABILITY_ELE_RX_MCS(_pEleStart) ((_pEleStart)+4)
#define GET_VHT_CAPABILITY_ELE_MCS_RX_HIGHEST_RATE(_pEleStart) LE_BITS_TO_2BYTE((_pEleStart)+6, 0, 13)
#define GET_VHT_CAPABILITY_ELE_TX_MCS(_pEleStart) ((_pEleStart)+8)
#define GET_VHT_CAPABILITY_ELE_MCS_TX_HIGHEST_RATE(_pEleStart) LE_BITS_TO_2BYTE((_pEleStart)+10, 0, 13)
//VHT Operation Information Element
#define SET_VHT_OPERATION_ELE_CHL_WIDTH(_pEleStart, _val) SET_BITS_TO_LE_1BYTE_8BIT(_pEleStart, 0, 8, _val)
#define SET_VHT_OPERATION_ELE_CHL_CENTER_FREQ1(_pEleStart, _val) SET_BITS_TO_LE_1BYTE_8BIT(_pEleStart+1, 0, 8, _val)
#define SET_VHT_OPERATION_ELE_CHL_CENTER_FREQ2(_pEleStart, _val) SET_BITS_TO_LE_1BYTE_8BIT(_pEleStart+2, 0, 8, _val)
#define SET_VHT_OPERATION_ELE_BASIC_MCS_SET(_pEleStart, _val) SET_BITS_TO_LE_2BYTE_16BIT((_pEleStart)+3, 0, 16, _val)
#define GET_VHT_OPERATION_ELE_CHL_WIDTH(_pEleStart) LE_BITS_TO_1BYTE(_pEleStart,0,8)
#define GET_VHT_OPERATION_ELE_CENTER_FREQ1(_pEleStart) LE_BITS_TO_1BYTE((_pEleStart)+1,0,8)
#define GET_VHT_OPERATION_ELE_CENTER_FREQ2(_pEleStart) LE_BITS_TO_1BYTE((_pEleStart)+2,0,8)
//VHT Operating Mode
#define SET_VHT_OPERATING_MODE_FIELD_CHNL_WIDTH(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 0, 2, _val)
#define SET_VHT_OPERATING_MODE_FIELD_RX_NSS(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 4, 3, _val)
#define SET_VHT_OPERATING_MODE_FIELD_RX_NSS_TYPE(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 7, 1, _val)
#define GET_VHT_OPERATING_MODE_FIELD_CHNL_WIDTH(_pEleStart) LE_BITS_TO_1BYTE(_pEleStart, 0, 2)
#define GET_VHT_OPERATING_MODE_FIELD_RX_NSS(_pEleStart) LE_BITS_TO_1BYTE(_pEleStart, 4, 3)
#define GET_VHT_OPERATING_MODE_FIELD_RX_NSS_TYPE(_pEleStart) LE_BITS_TO_1BYTE(_pEleStart, 7, 1)
#define SET_EXT_CAPABILITY_ELE_OP_MODE_NOTIF(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+7, 6, 1, _val)
#define GET_EXT_CAPABILITY_ELE_OP_MODE_NOTIF(_pEleStart) LE_BITS_TO_1BYTE((_pEleStart)+7, 6, 1)
struct vht_priv
{
u8 vht_option;
u8 ldpc_cap;
u8 stbc_cap;
u8 beamform_cap;
u8 sgi_80m;//short GI
u8 ampdu_len;
u8 vht_op_mode_notify;
u8 vht_highest_rate;
u8 vht_mcs_map[2];
u8 vht_cap[32];
};
u8 rtw_get_vht_highest_rate(u8 *pvht_mcs_map);
void rtw_get_vht_nss(u8 *pvht_mcs_map);
u16 rtw_vht_mcs_to_data_rate(u8 bw, u8 short_GI, u8 vht_mcs_rate);
u32 rtw_vht_rate_to_bitmap(u8 *pVHTRate);
void rtw_vht_use_default_setting(_adapter *padapter);
u32 rtw_build_vht_operation_ie(_adapter *padapter, u8 *pbuf, u8 channel);
u32 rtw_build_vht_op_mode_notify_ie(_adapter *padapter, u8 *pbuf, u8 bw);
u32 rtw_build_vht_cap_ie(_adapter *padapter, u8 *pbuf);
void update_sta_vht_info_apmode(_adapter *padapter, PVOID psta);
void update_hw_vht_param(_adapter *padapter);
void VHT_caps_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE);
void VHT_operation_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE);
void rtw_process_vht_op_mode_notify(_adapter *padapter, u8 *pframe, PVOID sta);
u32 rtw_restructure_vht_ie(_adapter *padapter, u8 *in_ie, u8 *out_ie, uint in_len, uint *pout_len);
void VHTOnAssocRsp(_adapter *padapter);
#endif //_RTW_VHT_H_