rtl8192eu-linux-driver/include/rtl8188e_cmd.h
Magnus Bergmark 1387cf623d
The official RTL8192EU linux driver from D-Link Australia
Version information: 20140812_rtl8192EU_linux_v4.3.1.1_11320
  2014-08-12
  version 4.3.1.1_11320
Source:
  ftp://files.dlink.com.au/products/DWA-131/REV_E/Drivers/DWA-131_Linux_driver_v4.3.1.1.zip

This version does not currently work on newer kernels, but it does
contain USB ID 2001:3319, which a lot of other repos in GitHub does not.
2015-08-18 21:03:11 +02:00

250 lines
8.3 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __RTL8188E_CMD_H__
#define __RTL8188E_CMD_H__
#if 0
enum cmd_msg_element_id
{
NONE_CMDMSG_EID,
AP_OFFLOAD_EID = 0,
SET_PWRMODE_EID = 1,
JOINBSS_RPT_EID = 2,
RSVD_PAGE_EID = 3,
RSSI_4_EID = 4,
RSSI_SETTING_EID = 5,
MACID_CONFIG_EID = 6,
MACID_PS_MODE_EID = 7,
P2P_PS_OFFLOAD_EID = 8,
SELECTIVE_SUSPEND_ROF_CMD = 9,
P2P_PS_CTW_CMD_EID = 32,
MAX_CMDMSG_EID
};
#else
typedef enum _RTL8188E_H2C_CMD_ID
{
//Class Common
H2C_COM_RSVD_PAGE =0x00,
H2C_COM_MEDIA_STATUS_RPT =0x01,
H2C_COM_SCAN =0x02,
H2C_COM_KEEP_ALIVE =0x03,
H2C_COM_DISCNT_DECISION =0x04,
#ifndef CONFIG_WOWLAN
H2C_COM_WWLAN =0x05,
#endif
H2C_COM_INIT_OFFLOAD =0x06,
H2C_COM_REMOTE_WAKE_CTL =0x07,
H2C_COM_AP_OFFLOAD =0x08,
H2C_COM_BCN_RSVD_PAGE =0x09,
H2C_COM_PROB_RSP_RSVD_PAGE =0x0A,
//Class PS
H2C_PS_PWR_MODE =0x20,
H2C_PS_TUNE_PARA =0x21,
H2C_PS_TUNE_PARA_2 =0x22,
H2C_PS_LPS_PARA =0x23,
H2C_PS_P2P_OFFLOAD =0x24,
//Class DM
H2C_DM_MACID_CFG =0x40,
H2C_DM_TXBF =0x41,
//Class BT
H2C_BT_COEX_MASK =0x60,
H2C_BT_COEX_GPIO_MODE =0x61,
H2C_BT_DAC_SWING_VAL =0x62,
H2C_BT_PSD_RST =0x63,
//Class Remote WakeUp
#ifdef CONFIG_WOWLAN
H2C_COM_WWLAN =0x80,
H2C_COM_REMOTE_WAKE_CTRL =0x81,
H2C_COM_AOAC_GLOBAL_INFO =0x82,
H2C_COM_AOAC_RSVD_PAGE =0x83,
#endif
//Class
//H2C_RESET_TSF =0xc0,
}RTL8188E_H2C_CMD_ID;
#endif
struct cmd_msg_parm {
u8 eid; //element id
u8 sz; // sz
u8 buf[6];
};
enum{
PWRS
};
typedef struct _SETPWRMODE_PARM {
u8 Mode;//0:Active,1:LPS,2:WMMPS
//u8 RLBM:4;//0:Min,1:Max,2: User define
u8 SmartPS_RLBM;//LPS=0:PS_Poll,1:PS_Poll,2:NullData,WMM=0:PS_Poll,1:NullData
u8 AwakeInterval; // unit: beacon interval
u8 bAllQueueUAPSD;
u8 PwrState;//AllON(0x0c),RFON(0x04),RFOFF(0x00)
} SETPWRMODE_PARM, *PSETPWRMODE_PARM;
struct H2C_SS_RFOFF_PARAM{
u8 ROFOn; // 1: on, 0:off
u16 gpio_period; // unit: 1024 us
}__attribute__ ((packed));
typedef struct JOINBSSRPT_PARM_88E{
u8 OpMode; // RT_MEDIA_STATUS
#ifdef CONFIG_WOWLAN
u8 MacID; // MACID
#endif //CONFIG_WOWLAN
}JOINBSSRPT_PARM_88E, *PJOINBSSRPT_PARM_88E;
/* move to hal_com_h2c.h
typedef struct _RSVDPAGE_LOC_88E {
u8 LocProbeRsp;
u8 LocPsPoll;
u8 LocNullData;
u8 LocQosNull;
u8 LocBTQosNull;
#ifdef CONFIG_WOWLAN
u8 LocRemoteCtrlInfo;
u8 LocArpRsp;
u8 LocNbrAdv;
u8 LocGTKRsp;
u8 LocGTKInfo;
u8 LocProbeReq;
u8 LocNetList;
#endif //CONFIG_WOWLAN
} RSVDPAGE_LOC_88E, *PRSVDPAGE_LOC_88E;
*/
// host message to firmware cmd
void rtl8188e_set_FwPwrMode_cmd(PADAPTER padapter, u8 Mode);
void rtl8188e_set_FwJoinBssReport_cmd(PADAPTER padapter, u8 mstatus);
u8 rtl8188e_set_rssi_cmd(PADAPTER padapter, u8 *param);
u8 rtl8188e_set_raid_cmd(PADAPTER padapter, u32 mask);
void rtl8188e_Add_RateATid(PADAPTER padapter, u32 bitmap, u8* arg, u8 rssi_level);
//u8 rtl8192c_set_FwSelectSuspend_cmd(PADAPTER padapter, u8 bfwpoll, u16 period);
#ifdef CONFIG_P2P
void rtl8188e_set_p2p_ps_offload_cmd(PADAPTER padapter, u8 p2p_ps_state);
#endif //CONFIG_P2P
void CheckFwRsvdPageContent(PADAPTER padapter);
void rtl8188e_set_FwMediaStatus_cmd(PADAPTER padapter, u16 mstatus_rpt );
#ifdef CONFIG_TSF_RESET_OFFLOAD
//u8 rtl8188e_reset_tsf(_adapter *padapter, u8 reset_port);
int reset_tsf(PADAPTER Adapter, u8 reset_port );
#endif // CONFIG_TSF_RESET_OFFLOAD
//#define H2C_8188E_RSVDPAGE_LOC_LEN 5
//#define H2C_8188E_AOAC_RSVDPAGE_LOC_LEN 7
#ifdef CONFIG_WOWLAN
typedef struct _SETWOWLAN_PARM{
u8 mode;
u8 gpio_index;
u8 gpio_duration;
u8 second_mode;
u8 reserve;
}SETWOWLAN_PARM, *PSETWOWLAN_PARM;
typedef struct _SETAOAC_GLOBAL_INFO{
u8 pairwiseEncAlg;
u8 groupEncAlg;
}SETAOAC_GLOBAL_INFO, *PSETAOAC_GLOBAL_INFO;
/* move to hal_com_h2c.h
#define eqMacAddr(a,b) ( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )
#define cpMacAddr(des,src) ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5])
#define cpIpAddr(des,src) ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3])
//
// ARP packet
//
// LLC Header
#define GET_ARP_PKT_LLC_TYPE(__pHeader) ReadEF2Byte( ((u8*)(__pHeader)) + 6)
//ARP element
#define GET_ARP_PKT_OPERATION(__pHeader) ReadEF2Byte( ((u8*)(__pHeader)) + 6)
#define GET_ARP_PKT_SENDER_MAC_ADDR(__pHeader, _val) cpMacAddr((u8*)(_val), ((u8*)(__pHeader))+8)
#define GET_ARP_PKT_SENDER_IP_ADDR(__pHeader, _val) cpIpAddr((u8*)(_val), ((u8*)(__pHeader))+14)
#define GET_ARP_PKT_TARGET_MAC_ADDR(__pHeader, _val) cpMacAddr((u8*)(_val), ((u8*)(__pHeader))+18)
#define SET_ARP_PKT_HW(__pHeader, __Value) WriteEF2Byte( ((u8*)(__pHeader)) + 0, __Value)
#define SET_ARP_PKT_PROTOCOL(__pHeader, __Value) WriteEF2Byte( ((u8*)(__pHeader)) + 2, __Value)
#define SET_ARP_PKT_HW_ADDR_LEN(__pHeader, __Value) WriteEF1Byte( ((u8*)(__pHeader)) + 4, __Value)
#define SET_ARP_PKT_PROTOCOL_ADDR_LEN(__pHeader, __Value) WriteEF1Byte( ((u8*)(__pHeader)) + 5, __Value)
#define SET_ARP_PKT_OPERATION(__pHeader, __Value) WriteEF2Byte( ((u8*)(__pHeader)) + 6, __Value)
#define SET_ARP_PKT_SENDER_MAC_ADDR(__pHeader, _val) cpMacAddr(((u8*)(__pHeader))+8, (u8*)(_val))
#define SET_ARP_PKT_SENDER_IP_ADDR(__pHeader, _val) cpIpAddr(((u8*)(__pHeader))+14, (u8*)(_val))
#define SET_ARP_PKT_TARGET_MAC_ADDR(__pHeader, _val) cpMacAddr(((u8*)(__pHeader))+18, (u8*)(_val))
#define SET_ARP_PKT_TARGET_IP_ADDR(__pHeader, _val) cpIpAddr(((u8*)(__pHeader))+24, (u8*)(_val))
#define FW_WOWLAN_FUN_EN BIT(0)
#define FW_WOWLAN_PATTERN_MATCH BIT(1)
#define FW_WOWLAN_MAGIC_PKT BIT(2)
#define FW_WOWLAN_UNICAST BIT(3)
#define FW_WOWLAN_ALL_PKT_DROP BIT(4)
#define FW_WOWLAN_GPIO_ACTIVE BIT(5)
#define FW_WOWLAN_REKEY_WAKEUP BIT(6)
#define FW_WOWLAN_DEAUTH_WAKEUP BIT(7)
#define FW_WOWLAN_GPIO_WAKEUP_EN BIT(0)
#define FW_FW_PARSE_MAGIC_PKT BIT(1)
#define FW_WOWLAN_KEEP_ALIVE_EN BIT(0)
#define FW_WOWLAN_KEEP_ALIVE_PKT_TYPE BIT(2)
#define FW_REMOTE_WAKE_CTRL_EN BIT(0)
#define FW_ARP_EN BIT(1)
#define FW_REALWOWLAN_EN BIT(5)
#define FW_WOW_FW_UNICAST_EN BIT(7)
#define FW_ADOPT_USER BIT(1)
*/
void rtl8188es_set_wowlan_cmd(_adapter* padapter, u8 enable);
void SetFwRelatedForWoWLAN8188ES(_adapter* padapter, u8 bHostIsGoingtoSleep);
#endif//CONFIG_WOWLAN
//---------------------------------------------------------------------------------------------------------//
//---------------------------------- H2C CMD CONTENT --------------------------------------------------//
//---------------------------------------------------------------------------------------------------------//
//
/* move to hal_com_h2c.h
//_RSVDPAGE_LOC_CMD_0x00
#define SET_8188E_H2CCMD_RSVDPAGE_LOC_PROBE_RSP(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE(__pH2CCmd, 0, 8, __Value)
#define SET_8188E_H2CCMD_RSVDPAGE_LOC_PSPOLL(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE((__pH2CCmd)+1, 0, 8, __Value)
#define SET_8188E_H2CCMD_RSVDPAGE_LOC_NULL_DATA(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE((__pH2CCmd)+2, 0, 8, __Value)
#define SET_8188E_H2CCMD_RSVDPAGE_LOC_QOS_NULL_DATA(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE((__pH2CCmd)+3, 0, 8, __Value)
// AOAC_RSVDPAGE_LOC_0x83
#define SET_8188E_H2CCMD_AOAC_RSVDPAGE_LOC_REMOTE_WAKE_CTRL_INFO(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE((__pH2CCmd), 0, 8, __Value)
#define SET_8188E_H2CCMD_AOAC_RSVDPAGE_LOC_ARP_RSP(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE((__pH2CCmd)+1, 0, 8, __Value)
*/
#endif//__RTL8188E_CMD_H__