/****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * ******************************************************************************/ #ifndef __RTL8188F_HAL_H__ #define __RTL8188F_HAL_H__ #include "hal_data.h" #include "rtl8188f_spec.h" #include "rtl8188f_rf.h" #include "rtl8188f_dm.h" #include "rtl8188f_recv.h" #include "rtl8188f_xmit.h" #include "rtl8188f_cmd.h" #include "rtl8188f_led.h" #include "Hal8188FPwrSeq.h" #include "Hal8188FPhyReg.h" #include "Hal8188FPhyCfg.h" #ifdef DBG_CONFIG_ERROR_DETECT #include "rtl8188f_sreset.h" #endif //--------------------------------------------------------------------- // RTL8188F From file //--------------------------------------------------------------------- #define RTL8188F_FW_IMG "rtl8188f/FW_NIC.bin" #define RTL8188F_FW_WW_IMG "rtl8188f/FW_WoWLAN.bin" #define RTL8188F_PHY_REG "rtl8188f/PHY_REG.txt" #define RTL8188F_PHY_RADIO_A "rtl8188f/RadioA.txt" #define RTL8188F_PHY_RADIO_B "rtl8188f/RadioB.txt" #define RTL8188F_TXPWR_TRACK "rtl8188f/TxPowerTrack.txt" #define RTL8188F_AGC_TAB "rtl8188f/AGC_TAB.txt" #define RTL8188F_PHY_MACREG "rtl8188f/MAC_REG.txt" #define RTL8188F_PHY_REG_PG "rtl8188f/PHY_REG_PG.txt" #define RTL8188F_PHY_REG_MP "rtl8188f/PHY_REG_MP.txt" #define RTL8188F_TXPWR_LMT "rtl8188f/TXPWR_LMT.txt" //--------------------------------------------------------------------- // RTL8188F From header //--------------------------------------------------------------------- #if MP_DRIVER == 1 #define Rtl8188F_FwBTImgArray Rtl8188FFwBTImgArray #define Rtl8188F_FwBTImgArrayLength Rtl8188FFwBTImgArrayLength #define Rtl8188F_FwMPImageArray Rtl8188FFwMPImgArray #define Rtl8188F_FwMPImgArrayLength Rtl8188FMPImgArrayLength #define Rtl8188F_PHY_REG_Array_MP Rtl8188F_PHYREG_Array_MP #define Rtl8188F_PHY_REG_Array_MPLength Rtl8188F_PHYREG_Array_MPLength #endif #define FW_8188F_SIZE 0x8000 #define FW_8188F_START_ADDRESS 0x1000 #define FW_8188F_END_ADDRESS 0x1FFF //0x5FFF #define IS_FW_HEADER_EXIST_8188F(_pFwHdr) ((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88F0) typedef struct _RT_FIRMWARE { FIRMWARE_SOURCE eFWSource; #ifdef CONFIG_EMBEDDED_FWIMG u8* szFwBuffer; #else u8 szFwBuffer[FW_8188F_SIZE]; #endif u32 ulFwLength; } RT_FIRMWARE_8188F, *PRT_FIRMWARE_8188F; // // This structure must be cared byte-ordering // // Added by tynli. 2009.12.04. typedef struct _RT_8188F_FIRMWARE_HDR { // 8-byte alinment required //--- LONG WORD 0 ---- u16 Signature; // 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut u8 Category; // AP/NIC and USB/PCI u8 Function; // Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions u16 Version; // FW Version u16 Subversion; // FW Subversion, default 0x00 //--- LONG WORD 1 ---- u8 Month; // Release time Month field u8 Date; // Release time Date field u8 Hour; // Release time Hour field u8 Minute; // Release time Minute field u16 RamCodeSize; // The size of RAM code u16 Rsvd2; //--- LONG WORD 2 ---- u32 SvnIdx; // The SVN entry index u32 Rsvd3; //--- LONG WORD 3 ---- u32 Rsvd4; u32 Rsvd5; }RT_8188F_FIRMWARE_HDR, *PRT_8188F_FIRMWARE_HDR; #define DRIVER_EARLY_INT_TIME_8188F 0x05 #define BCN_DMA_ATIME_INT_TIME_8188F 0x02 // for 8188F // TX 32K, RX 16K, Page size 128B for TX, 8B for RX #define PAGE_SIZE_TX_8188F 128 #define PAGE_SIZE_RX_8188F 8 #define RX_DMA_SIZE_8188F 0x4000 // 16K #ifdef CONFIG_FW_C2H_DEBUG #define RX_DMA_RESERVED_SIZE_8188F 0x100 // 256B, reserved for c2h debug message #else #define RX_DMA_RESERVED_SIZE_8188F 0x80 // 128B, reserved for tx report #endif #ifdef CONFIG_WOWLAN #define RESV_FMWF WKFMCAM_SIZE*MAX_WKFM_NUM /* 16 entries, for each is 24 bytes*/ #else #define RESV_FMWF 0 #endif #define RX_DMA_BOUNDARY_8188F (RX_DMA_SIZE_8188F - RX_DMA_RESERVED_SIZE_8188F - 1) // Note: We will divide number of page equally for each queue other than public queue! //For General Reserved Page Number(Beacon Queue is reserved page) //Beacon:2, PS-Poll:1, Null Data:1,Qos Null Data:1,BT Qos Null Data:1 #define BCNQ_PAGE_NUM_8188F 0x08 #ifdef CONFIG_CONCURRENT_MODE #define BCNQ1_PAGE_NUM_8188F 0x08 // 0x04 #else #define BCNQ1_PAGE_NUM_8188F 0x00 #endif #ifdef CONFIG_PNO_SUPPORT #undef BCNQ1_PAGE_NUM_8188F #define BCNQ1_PAGE_NUM_8188F 0x00 // 0x04 #endif //For WoWLan , more reserved page //ARP Rsp:1, RWC:1, GTK Info:1,GTK RSP:2,GTK EXT MEM:2, PNO: 6 #ifdef CONFIG_WOWLAN #define WOWLAN_PAGE_NUM_8188F 0x07 #else #define WOWLAN_PAGE_NUM_8188F 0x00 #endif #ifdef CONFIG_PNO_SUPPORT #undef WOWLAN_PAGE_NUM_8188F #define WOWLAN_PAGE_NUM_8188F 0x15 #endif #ifdef CONFIG_AP_WOWLAN #define AP_WOWLAN_PAGE_NUM_8188F 0x02 #endif #define TX_TOTAL_PAGE_NUMBER_8188F (0xFF - BCNQ_PAGE_NUM_8188F - BCNQ1_PAGE_NUM_8188F - WOWLAN_PAGE_NUM_8188F) #define TX_PAGE_BOUNDARY_8188F (TX_TOTAL_PAGE_NUMBER_8188F + 1) #define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_8188F TX_TOTAL_PAGE_NUMBER_8188F #define WMM_NORMAL_TX_PAGE_BOUNDARY_8188F (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_8188F + 1) // For Normal Chip Setting // (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER_8188F #define NORMAL_PAGE_NUM_HPQ_8188F 0x0C #define NORMAL_PAGE_NUM_LPQ_8188F 0x02 #define NORMAL_PAGE_NUM_NPQ_8188F 0x02 // Note: For Normal Chip Setting, modify later #define WMM_NORMAL_PAGE_NUM_HPQ_8188F 0x30 #define WMM_NORMAL_PAGE_NUM_LPQ_8188F 0x20 #define WMM_NORMAL_PAGE_NUM_NPQ_8188F 0x20 #include "HalVerDef.h" #include "hal_com.h" #define EFUSE_OOB_PROTECT_BYTES 15 #define HAL_EFUSE_MEMORY #define HWSET_MAX_SIZE_8188F 512 #define EFUSE_REAL_CONTENT_LEN_8188F 512 #define EFUSE_MAP_LEN_8188F 512 #define EFUSE_MAX_SECTION_8188F 64 #define EFUSE_IC_ID_OFFSET 506 //For some inferiority IC purpose. added by Roger, 2009.09.02. #define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN_8188F) #define EFUSE_ACCESS_ON 0x69 // For RTL8188 only. #define EFUSE_ACCESS_OFF 0x00 // For RTL8188 only. //======================================================== // EFUSE for BT definition //======================================================== #define EFUSE_BT_REAL_BANK_CONTENT_LEN 512 #define EFUSE_BT_REAL_CONTENT_LEN 1536 // 512*3 #define EFUSE_BT_MAP_LEN 1024 // 1k bytes #define EFUSE_BT_MAX_SECTION 128 // 1024/8 #define EFUSE_PROTECT_BYTES_BANK 16 typedef struct _C2H_EVT_HDR { u8 CmdID; u8 CmdLen; u8 CmdSeq; } __attribute__((__packed__)) C2H_EVT_HDR, *PC2H_EVT_HDR; #define INCLUDE_MULTI_FUNC_BT(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT) #define INCLUDE_MULTI_FUNC_GPS(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS) // rtl8188a_hal_init.c s32 rtl8188f_FirmwareDownload(PADAPTER padapter, BOOLEAN bUsedWoWLANFw); void rtl8188f_FirmwareSelfReset(PADAPTER padapter); void rtl8188f_InitializeFirmwareVars(PADAPTER padapter); void rtl8188f_InitAntenna_Selection(PADAPTER padapter); void rtl8188f_DeinitAntenna_Selection(PADAPTER padapter); void rtl8188f_CheckAntenna_Selection(PADAPTER padapter); void rtl8188f_init_default_value(PADAPTER padapter); s32 rtl8188f_InitLLTTable(PADAPTER padapter); s32 CardDisableHWSM(PADAPTER padapter, u8 resetMCU); s32 CardDisableWithoutHWSM(PADAPTER padapter); // EFuse u8 GetEEPROMSize8188F(PADAPTER padapter); void Hal_InitPGData(PADAPTER padapter, u8 *PROMContent); void Hal_EfuseParseIDCode(PADAPTER padapter, u8 *hwinfo); void Hal_EfuseParseTxPowerInfo_8188F(PADAPTER padapter, u8 *PROMContent, BOOLEAN AutoLoadFail); /* void Hal_EfuseParseBTCoexistInfo_8188F(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); */ void Hal_EfuseParseEEPROMVer_8188F(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseChnlPlan_8188F(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseCustomerID_8188F(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParsePowerSavingMode_8188F(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseAntennaDiversity_8188F(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseXtal_8188F(PADAPTER pAdapter, u8 *hwinfo, u8 AutoLoadFail); void Hal_EfuseParseThermalMeter_8188F(PADAPTER padapter, u8 *hwinfo, u8 AutoLoadFail); void Hal_EfuseParseKFreeData_8188F(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail); #if 0 /* Do not need for rtl8188f */ VOID Hal_EfuseParseVoltage_8188F(PADAPTER pAdapter,u8* hwinfo,BOOLEAN AutoLoadFail); #endif #ifdef CONFIG_C2H_PACKET_EN void rtl8188f_c2h_packet_handler(PADAPTER padapter, u8 *pbuf, u16 length); #endif void rtl8188f_set_pll_ref_clk_sel(_adapter *adapter, u8 sel); void rtl8188f_set_hal_ops(struct hal_ops *pHalFunc); void init_hal_spec_8188f(_adapter *adapter); void SetHwReg8188F(PADAPTER padapter, u8 variable, u8 *val); void GetHwReg8188F(PADAPTER padapter, u8 variable, u8 *val); #ifdef CONFIG_C2H_PACKET_EN void SetHwRegWithBuf8188F(PADAPTER padapter, u8 variable, u8 *pbuf, int len); #endif // CONFIG_C2H_PACKET_EN u8 SetHalDefVar8188F(PADAPTER padapter, HAL_DEF_VARIABLE variable, void *pval); u8 GetHalDefVar8188F(PADAPTER padapter, HAL_DEF_VARIABLE variable, void *pval); // register void rtl8188f_InitBeaconParameters(PADAPTER padapter); void rtl8188f_InitBeaconMaxError(PADAPTER padapter, u8 InfraMode); void _InitBurstPktLen_8188FS(PADAPTER Adapter); void _8051Reset8188(PADAPTER padapter); #ifdef CONFIG_WOWLAN void Hal_DetectWoWMode(PADAPTER pAdapter); #endif //CONFIG_WOWLAN void rtl8188f_start_thread(_adapter *padapter); void rtl8188f_stop_thread(_adapter *padapter); #if defined(CONFIG_CHECK_BT_HANG) && defined(CONFIG_BT_COEXIST) void rtl8188fs_init_checkbthang_workqueue(_adapter * adapter); void rtl8188fs_free_checkbthang_workqueue(_adapter * adapter); void rtl8188fs_cancle_checkbthang_workqueue(_adapter * adapter); void rtl8188fs_hal_check_bt_hang(_adapter * adapter); #endif #ifdef CONFIG_GPIO_WAKEUP void HalSetOutPutGPIO(PADAPTER padapter, u8 index, u8 OutPutValue); #endif int FirmwareDownloadBT(IN PADAPTER Adapter, PRT_MP_FIRMWARE pFirmware); void CCX_FwC2HTxRpt_8188f(PADAPTER padapter, u8 *pdata, u8 len); #ifdef CONFIG_FW_C2H_DEBUG void Debug_FwC2H_8188f(PADAPTER padapter, u8 *pdata, u8 len); #endif //CONFIG_FW_C2H_DEBUG s32 c2h_id_filter_ccx_8188f(u8 *buf); s32 c2h_handler_8188f(PADAPTER padapter, u8 *pC2hEvent); u8 MRateToHwRate8188F(u8 rate); u8 HwRateToMRate8188F(u8 rate); #ifdef CONFIG_PCI_HCI BOOLEAN InterruptRecognized8188FE(PADAPTER Adapter); VOID UpdateInterruptMask8188FE(PADAPTER Adapter, u32 AddMSR, u32 AddMSR1, u32 RemoveMSR, u32 RemoveMSR1); #endif #endif