/****************************************************************************** * * Copyright(c) 2007 - 2017 Realtek Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * *****************************************************************************/ /***************************************************************************** * * Module: __RTW_MP_PHY_REGDEF_H_ * * * Note: 1. Define PMAC/BB register map * 2. Define RF register map * 3. PMAC/BB register bit mask. * 4. RF reg bit mask. * 5. Other BB/RF relative definition. * * * Export: Constants, macro, functions(API), global variables(None). * * Abbrev: * * History: * Data Who Remark * 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h. * 2. Reorganize code architecture. * 09/25/2008 MH 1. Add RL6052 register definition * *****************************************************************************/ #ifndef __RTW_MP_PHY_REGDEF_H_ #define __RTW_MP_PHY_REGDEF_H_ /*--------------------------Define Parameters-------------------------------*/ /* ************************************************************ * 8192S Regsiter offset definition * ************************************************************ */ /* * BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF * 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF * 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 * 3. RF register 0x00-2E * 4. Bit Mask for BB/RF register * 5. Other defintion for BB/RF R/W * */ /* * 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF * 1. Page1(0x100) * */ #define rPMAC_Reset 0x100 #define rPMAC_TxStart 0x104 #define rPMAC_TxLegacySIG 0x108 #define rPMAC_TxHTSIG1 0x10c #define rPMAC_TxHTSIG2 0x110 #define rPMAC_PHYDebug 0x114 #define rPMAC_TxPacketNum 0x118 #define rPMAC_TxIdle 0x11c #define rPMAC_TxMACHeader0 0x120 #define rPMAC_TxMACHeader1 0x124 #define rPMAC_TxMACHeader2 0x128 #define rPMAC_TxMACHeader3 0x12c #define rPMAC_TxMACHeader4 0x130 #define rPMAC_TxMACHeader5 0x134 #define rPMAC_TxDataType 0x138 #define rPMAC_TxRandomSeed 0x13c #define rPMAC_CCKPLCPPreamble 0x140 #define rPMAC_CCKPLCPHeader 0x144 #define rPMAC_CCKCRC16 0x148 #define rPMAC_OFDMRxCRC32OK 0x170 #define rPMAC_OFDMRxCRC32Er 0x174 #define rPMAC_OFDMRxParityEr 0x178 #define rPMAC_OFDMRxCRC8Er 0x17c #define rPMAC_CCKCRxRC16Er 0x180 #define rPMAC_CCKCRxRC32Er 0x184 #define rPMAC_CCKCRxRC32OK 0x188 #define rPMAC_TxStatus 0x18c /* * 2. Page2(0x200) * * The following two definition are only used for USB interface. * #define RF_BB_CMD_ADDR 0x02c0 */ /* RF/BB read/write command address. * #define RF_BB_CMD_DATA 0x02c4 */ /* RF/BB read/write command data. */ /* * 3. Page8(0x800) * */ #define rFPGA0_RFMOD 0x800 /* RF mode & CCK TxSC */ /* RF BW Setting?? */ #define rFPGA0_TxInfo 0x804 /* Status report?? */ #define rFPGA0_PSDFunction 0x808 #define rFPGA0_TxGainStage 0x80c /* Set TX PWR init gain? */ #define rFPGA0_RFTiming1 0x810 /* Useless now */ #define rFPGA0_RFTiming2 0x814 /* #define rFPGA0_XC_RFTiming 0x818 */ /* #define rFPGA0_XD_RFTiming 0x81c */ #define rFPGA0_XA_HSSIParameter1 0x820 /* RF 3 wire register */ #define rFPGA0_XA_HSSIParameter2 0x824 #define rFPGA0_XB_HSSIParameter1 0x828 #define rFPGA0_XB_HSSIParameter2 0x82c #define rFPGA0_XC_HSSIParameter1 0x830 #define rFPGA0_XC_HSSIParameter2 0x834 #define rFPGA0_XD_HSSIParameter1 0x838 #define rFPGA0_XD_HSSIParameter2 0x83c #define rFPGA0_XA_LSSIParameter 0x840 #define rFPGA0_XB_LSSIParameter 0x844 #define rFPGA0_XC_LSSIParameter 0x848 #define rFPGA0_XD_LSSIParameter 0x84c #define rFPGA0_RFWakeUpParameter 0x850 /* Useless now */ #define rFPGA0_RFSleepUpParameter 0x854 #define rFPGA0_XAB_SwitchControl 0x858 /* RF Channel switch */ #define rFPGA0_XCD_SwitchControl 0x85c #define rFPGA0_XA_RFInterfaceOE 0x860 /* RF Channel switch */ #define rFPGA0_XB_RFInterfaceOE 0x864 #define rFPGA0_XC_RFInterfaceOE 0x868 #define rFPGA0_XD_RFInterfaceOE 0x86c #define rFPGA0_XAB_RFInterfaceSW 0x870 /* RF Interface Software Control */ #define rFPGA0_XCD_RFInterfaceSW 0x874 #define rFPGA0_XAB_RFParameter 0x878 /* RF Parameter */ #define rFPGA0_XCD_RFParameter 0x87c #define rFPGA0_AnalogParameter1 0x880 /* Crystal cap setting RF-R/W protection for parameter4?? */ #define rFPGA0_AnalogParameter2 0x884 #define rFPGA0_AnalogParameter3 0x888 /* Useless now */ #define rFPGA0_AnalogParameter4 0x88c #define rFPGA0_XA_LSSIReadBack 0x8a0 /* Tranceiver LSSI Readback */ #define rFPGA0_XB_LSSIReadBack 0x8a4 #define rFPGA0_XC_LSSIReadBack 0x8a8 #define rFPGA0_XD_LSSIReadBack 0x8ac #define rFPGA0_PSDReport 0x8b4 /* Useless now */ #define rFPGA0_XAB_RFInterfaceRB 0x8e0 /* Useless now */ /* RF Interface Readback Value */ #define rFPGA0_XCD_RFInterfaceRB 0x8e4 /* Useless now */ /* * 4. Page9(0x900) * */ #define rFPGA1_RFMOD 0x900 /* RF mode & OFDM TxSC */ /* RF BW Setting?? */ #define rFPGA1_TxBlock 0x904 /* Useless now */ #define rFPGA1_DebugSelect 0x908 /* Useless now */ #define rFPGA1_TxInfo 0x90c /* Useless now */ /* Status report?? */ #define rS0S1_PathSwitch 0x948 /* * 5. PageA(0xA00) * * Set Control channel to upper or lower. These settings are required only for 40MHz */ #define rCCK0_System 0xa00 #define rCCK0_AFESetting 0xa04 /* Disable init gain now */ /* Select RX path by RSSI */ #define rCCK0_CCA 0xa08 /* Disable init gain now */ /* Init gain */ #define rCCK0_RxAGC1 0xa0c /* AGC default value, saturation level */ /* Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series */ #define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */ #define rCCK0_RxHP 0xa14 #define rCCK0_DSPParameter1 0xa18 /* Timing recovery & Channel estimation threshold */ #define rCCK0_DSPParameter2 0xa1c /* SQ threshold */ #define rCCK0_TxFilter1 0xa20 #define rCCK0_TxFilter2 0xa24 #define rCCK0_DebugPort 0xa28 /* debug port and Tx filter3 */ #define rCCK0_FalseAlarmReport 0xa2c /* 0xa2d useless now 0xa30-a4f channel report */ #define rCCK0_TRSSIReport 0xa50 #define rCCK0_RxReport 0xa54 /* 0xa57 */ #define rCCK0_FACounterLower 0xa5c /* 0xa5b */ #define rCCK0_FACounterUpper 0xa58 /* 0xa5c */ /* * 6. PageC(0xC00) * */ #define rOFDM0_LSTF 0xc00 #define rOFDM0_TRxPathEnable 0xc04 #define rOFDM0_TRMuxPar 0xc08 #define rOFDM0_TRSWIsolation 0xc0c #define rOFDM0_XARxAFE 0xc10 /* RxIQ DC offset, Rx digital filter, DC notch filter */ #define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imblance matrix */ #define rOFDM0_XBRxAFE 0xc18 #define rOFDM0_XBRxIQImbalance 0xc1c #define rOFDM0_XCRxAFE 0xc20 #define rOFDM0_XCRxIQImbalance 0xc24 #define rOFDM0_XDRxAFE 0xc28 #define rOFDM0_XDRxIQImbalance 0xc2c #define rOFDM0_RxDetector1 0xc30 /* PD, BW & SBD */ /* DM tune init gain */ #define rOFDM0_RxDetector2 0xc34 /* SBD & Fame Sync. */ #define rOFDM0_RxDetector3 0xc38 /* Frame Sync. */ #define rOFDM0_RxDetector4 0xc3c /* PD, SBD, Frame Sync & Short-GI */ #define rOFDM0_RxDSP 0xc40 /* Rx Sync Path */ #define rOFDM0_CFOandDAGC 0xc44 /* CFO & DAGC */ #define rOFDM0_CCADropThreshold 0xc48 /* CCA Drop threshold */ #define rOFDM0_ECCAThreshold 0xc4c /* energy CCA */ #define rOFDM0_XAAGCCore1 0xc50 /* DIG */ #define rOFDM0_XAAGCCore2 0xc54 #define rOFDM0_XBAGCCore1 0xc58 #define rOFDM0_XBAGCCore2 0xc5c #define rOFDM0_XCAGCCore1 0xc60 #define rOFDM0_XCAGCCore2 0xc64 #define rOFDM0_XDAGCCore1 0xc68 #define rOFDM0_XDAGCCore2 0xc6c #define rOFDM0_AGCParameter1 0xc70 #define rOFDM0_AGCParameter2 0xc74 #define rOFDM0_AGCRSSITable 0xc78 #define rOFDM0_HTSTFAGC 0xc7c #define rOFDM0_XATxIQImbalance 0xc80 /* TX PWR TRACK and DIG */ #define rOFDM0_XATxAFE 0xc84 #define rOFDM0_XBTxIQImbalance 0xc88 #define rOFDM0_XBTxAFE 0xc8c #define rOFDM0_XCTxIQImbalance 0xc90 #define rOFDM0_XCTxAFE 0xc94 #define rOFDM0_XDTxIQImbalance 0xc98 #define rOFDM0_XDTxAFE 0xc9c #define rOFDM0_RxIQExtAnta 0xca0 #define rOFDM0_RxHPParameter 0xce0 #define rOFDM0_TxPseudoNoiseWgt 0xce4 #define rOFDM0_FrameSync 0xcf0 #define rOFDM0_DFSReport 0xcf4 #define rOFDM0_TxCoeff1 0xca4 #define rOFDM0_TxCoeff2 0xca8 #define rOFDM0_TxCoeff3 0xcac #define rOFDM0_TxCoeff4 0xcb0 #define rOFDM0_TxCoeff5 0xcb4 #define rOFDM0_TxCoeff6 0xcb8 /* * 7. PageD(0xD00) * */ #define rOFDM1_LSTF 0xd00 #define rOFDM1_TRxPathEnable 0xd04 #define rOFDM1_CFO 0xd08 /* No setting now */ #define rOFDM1_CSI1 0xd10 #define rOFDM1_SBD 0xd14 #define rOFDM1_CSI2 0xd18 #define rOFDM1_CFOTracking 0xd2c #define rOFDM1_TRxMesaure1 0xd34 #define rOFDM1_IntfDet 0xd3c #define rOFDM1_PseudoNoiseStateAB 0xd50 #define rOFDM1_PseudoNoiseStateCD 0xd54 #define rOFDM1_RxPseudoNoiseWgt 0xd58 #define rOFDM_PHYCounter1 0xda0 /* cca, parity fail */ #define rOFDM_PHYCounter2 0xda4 /* rate illegal, crc8 fail */ #define rOFDM_PHYCounter3 0xda8 /* MCS not support */ #define rOFDM_ShortCFOAB 0xdac /* No setting now */ #define rOFDM_ShortCFOCD 0xdb0 #define rOFDM_LongCFOAB 0xdb4 #define rOFDM_LongCFOCD 0xdb8 #define rOFDM_TailCFOAB 0xdbc #define rOFDM_TailCFOCD 0xdc0 #define rOFDM_PWMeasure1 0xdc4 #define rOFDM_PWMeasure2 0xdc8 #define rOFDM_BWReport 0xdcc #define rOFDM_AGCReport 0xdd0 #define rOFDM_RxSNR 0xdd4 #define rOFDM_RxEVMCSI 0xdd8 #define rOFDM_SIGReport 0xddc /* * 8. PageE(0xE00) * */ #define rTxAGC_Rate18_06 0xe00 #define rTxAGC_Rate54_24 0xe04 #define rTxAGC_CCK_Mcs32 0xe08 #define rTxAGC_Mcs03_Mcs00 0xe10 #define rTxAGC_Mcs07_Mcs04 0xe14 #define rTxAGC_Mcs11_Mcs08 0xe18 #define rTxAGC_Mcs15_Mcs12 0xe1c /* Analog- control in RX_WAIT_CCA : REG: EE0 [Analog- Power & Control Register] */ #define rRx_Wait_CCCA 0xe70 #define rAnapar_Ctrl_BB 0xee0 /* * 7. RF Register 0x00-0x2E (RF 8256) * RF-0222D 0x00-3F * * Zebra1 */ #define RTL92SE_FPGA_VERIFY 0 #define rZebra1_HSSIEnable 0x0 /* Useless now */ #define rZebra1_TRxEnable1 0x1 #define rZebra1_TRxEnable2 0x2 #define rZebra1_AGC 0x4 #define rZebra1_ChargePump 0x5 /* #if (RTL92SE_FPGA_VERIFY == 1) */ #define rZebra1_Channel 0x7 /* RF channel switch * #else */ /* #endif */ #define rZebra1_TxGain 0x8 /* Useless now */ #define rZebra1_TxLPF 0x9 #define rZebra1_RxLPF 0xb #define rZebra1_RxHPFCorner 0xc /* Zebra4 */ #define rGlobalCtrl 0 /* Useless now */ #define rRTL8256_TxLPF 19 #define rRTL8256_RxLPF 11 /* RTL8258 */ #define rRTL8258_TxLPF 0x11 /* Useless now */ #define rRTL8258_RxLPF 0x13 #define rRTL8258_RSSILPF 0xa /* * RL6052 Register definition * */ #define RF_AC 0x00 /* */ #define RF_IQADJ_G1 0x01 /* */ #define RF_IQADJ_G2 0x02 /* */ #define RF_POW_TRSW 0x05 /* */ #define RF_GAIN_RX 0x06 /* */ #define RF_GAIN_TX 0x07 /* */ #define RF_TXM_IDAC 0x08 /* */ #define RF_BS_IQGEN 0x0F /* */ #define RF_MODE1 0x10 /* */ #define RF_MODE2 0x11 /* */ #define RF_RX_AGC_HP 0x12 /* */ #define RF_TX_AGC 0x13 /* */ #define RF_BIAS 0x14 /* */ #define RF_IPA 0x15 /* */ #define RF_TXBIAS 0x16 #define RF_POW_ABILITY 0x17 /* */ #define RF_MODE_AG 0x18 /* */ #define rRfChannel 0x18 /* RF channel and BW switch */ #define RF_CHNLBW 0x18 /* RF channel and BW switch */ #define RF_TOP 0x19 /* */ #define RF_RX_G1 0x1A /* */ #define RF_RX_G2 0x1B /* */ #define RF_RX_BB2 0x1C /* */ #define RF_RX_BB1 0x1D /* */ #define RF_RCK1 0x1E /* */ #define RF_RCK2 0x1F /* */ #define RF_TX_G1 0x20 /* */ #define RF_TX_G2 0x21 /* */ #define RF_TX_G3 0x22 /* */ #define RF_TX_BB1 0x23 /* */ #define RF_T_METER 0x24 /* */ #define RF_SYN_G1 0x25 /* RF TX Power control */ #define RF_SYN_G2 0x26 /* RF TX Power control */ #define RF_SYN_G3 0x27 /* RF TX Power control */ #define RF_SYN_G4 0x28 /* RF TX Power control */ #define RF_SYN_G5 0x29 /* RF TX Power control */ #define RF_SYN_G6 0x2A /* RF TX Power control */ #define RF_SYN_G7 0x2B /* RF TX Power control */ #define RF_SYN_G8 0x2C /* RF TX Power control */ #define RF_RCK_OS 0x30 /* RF TX PA control */ #define RF_TXPA_G1 0x31 /* RF TX PA control */ #define RF_TXPA_G2 0x32 /* RF TX PA control */ #define RF_TXPA_G3 0x33 /* RF TX PA control */ /* * Bit Mask * * 1. Page1(0x100) */ #define bBBResetB 0x100 /* Useless now? */ #define bGlobalResetB 0x200 #define bOFDMTxStart 0x4 #define bCCKTxStart 0x8 #define bCRC32Debug 0x100 #define bPMACLoopback 0x10 #define bTxLSIG 0xffffff #define bOFDMTxRate 0xf #define bOFDMTxReserved 0x10 #define bOFDMTxLength 0x1ffe0 #define bOFDMTxParity 0x20000 #define bTxHTSIG1 0xffffff #define bTxHTMCSRate 0x7f #define bTxHTBW 0x80 #define bTxHTLength 0xffff00 #define bTxHTSIG2 0xffffff #define bTxHTSmoothing 0x1 #define bTxHTSounding 0x2 #define bTxHTReserved 0x4 #define bTxHTAggreation 0x8 #define bTxHTSTBC 0x30 #define bTxHTAdvanceCoding 0x40 #define bTxHTShortGI 0x80 #define bTxHTNumberHT_LTF 0x300 #define bTxHTCRC8 0x3fc00 #define bCounterReset 0x10000 #define bNumOfOFDMTx 0xffff #define bNumOfCCKTx 0xffff0000 #define bTxIdleInterval 0xffff #define bOFDMService 0xffff0000 #define bTxMACHeader 0xffffffff #define bTxDataInit 0xff #define bTxHTMode 0x100 #define bTxDataType 0x30000 #define bTxRandomSeed 0xffffffff #define bCCKTxPreamble 0x1 #define bCCKTxSFD 0xffff0000 #define bCCKTxSIG 0xff #define bCCKTxService 0xff00 #define bCCKLengthExt 0x8000 #define bCCKTxLength 0xffff0000 #define bCCKTxCRC16 0xffff #define bCCKTxStatus 0x1 #define bOFDMTxStatus 0x2 #define IS_BB_REG_OFFSET_92S(_Offset) ((_Offset >= 0x800) && (_Offset <= 0xfff)) /* 2. Page8(0x800) */ #define bRFMOD 0x1 /* Reg 0x800 rFPGA0_RFMOD */ #define bJapanMode 0x2 #define bCCKTxSC 0x30 #define bCCKEn 0x1000000 #define bOFDMEn 0x2000000 #define bOFDMRxADCPhase 0x10000 /* Useless now */ #define bOFDMTxDACPhase 0x40000 #define bXATxAGC 0x3f #define bXBTxAGC 0xf00 /* Reg 80c rFPGA0_TxGainStage */ #define bXCTxAGC 0xf000 #define bXDTxAGC 0xf0000 #define bPAStart 0xf0000000 /* Useless now */ #define bTRStart 0x00f00000 #define bRFStart 0x0000f000 #define bBBStart 0x000000f0 #define bBBCCKStart 0x0000000f #define bPAEnd 0xf /* Reg0x814 */ #define bTREnd 0x0f000000 #define bRFEnd 0x000f0000 #define bCCAMask 0x000000f0 /* T2R */ #define bR2RCCAMask 0x00000f00 #define bHSSI_R2TDelay 0xf8000000 #define bHSSI_T2RDelay 0xf80000 #define bContTxHSSI 0x400 /* chane gain at continue Tx */ #define bIGFromCCK 0x200 #define bAGCAddress 0x3f #define bRxHPTx 0x7000 #define bRxHPT2R 0x38000 #define bRxHPCCKIni 0xc0000 #define bAGCTxCode 0xc00000 #define bAGCRxCode 0x300000 #define b3WireDataLength 0x800 /* Reg 0x820~84f rFPGA0_XA_HSSIParameter1 */ #define b3WireAddressLength 0x400 #define b3WireRFPowerDown 0x1 /* Useless now * #define bHWSISelect 0x8 */ #define b5GPAPEPolarity 0x40000000 #define b2GPAPEPolarity 0x80000000 #define bRFSW_TxDefaultAnt 0x3 #define bRFSW_TxOptionAnt 0x30 #define bRFSW_RxDefaultAnt 0x300 #define bRFSW_RxOptionAnt 0x3000 #define bRFSI_3WireData 0x1 #define bRFSI_3WireClock 0x2 #define bRFSI_3WireLoad 0x4 #define bRFSI_3WireRW 0x8 #define bRFSI_3Wire 0xf #define bRFSI_RFENV 0x10 /* Reg 0x870 rFPGA0_XAB_RFInterfaceSW */ #define bRFSI_TRSW 0x20 /* Useless now */ #define bRFSI_TRSWB 0x40 #define bRFSI_ANTSW 0x100 #define bRFSI_ANTSWB 0x200 #define bRFSI_PAPE 0x400 #define bRFSI_PAPE5G 0x800 #define bBandSelect 0x1 #define bHTSIG2_GI 0x80 #define bHTSIG2_Smoothing 0x01 #define bHTSIG2_Sounding 0x02 #define bHTSIG2_Aggreaton 0x08 #define bHTSIG2_STBC 0x30 #define bHTSIG2_AdvCoding 0x40 #define bHTSIG2_NumOfHTLTF 0x300 #define bHTSIG2_CRC8 0x3fc #define bHTSIG1_MCS 0x7f #define bHTSIG1_BandWidth 0x80 #define bHTSIG1_HTLength 0xffff #define bLSIG_Rate 0xf #define bLSIG_Reserved 0x10 #define bLSIG_Length 0x1fffe #define bLSIG_Parity 0x20 #define bCCKRxPhase 0x4 #if (RTL92SE_FPGA_VERIFY == 1) #define bLSSIReadAddress 0x3f000000 /* LSSI "Read" Address */ /* Reg 0x824 rFPGA0_XA_HSSIParameter2 */ #else #define bLSSIReadAddress 0x7f800000 /* T65 RF */ #endif #define bLSSIReadEdge 0x80000000 /* LSSI "Read" edge signal */ #if (RTL92SE_FPGA_VERIFY == 1) #define bLSSIReadBackData 0xfff /* Reg 0x8a0 rFPGA0_XA_LSSIReadBack */ #else #define bLSSIReadBackData 0xfffff /* T65 RF */ #endif #define bLSSIReadOKFlag 0x1000 /* Useless now */ #define bCCKSampleRate 0x8 /* 0: 44MHz, 1:88MHz */ #define bRegulator0Standby 0x1 #define bRegulatorPLLStandby 0x2 #define bRegulator1Standby 0x4 #define bPLLPowerUp 0x8 #define bDPLLPowerUp 0x10 #define bDA10PowerUp 0x20 #define bAD7PowerUp 0x200 #define bDA6PowerUp 0x2000 #define bXtalPowerUp 0x4000 #define b40MDClkPowerUP 0x8000 #define bDA6DebugMode 0x20000 #define bDA6Swing 0x380000 #define bADClkPhase 0x4000000 /* Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ */ #define b80MClkDelay 0x18000000 /* Useless */ #define bAFEWatchDogEnable 0x20000000 #define bXtalCap01 0xc0000000 /* Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap */ #define bXtalCap23 0x3 #define bXtalCap92x 0x0f000000 #define bXtalCap 0x0f000000 #define bIntDifClkEnable 0x400 /* Useless */ #define bExtSigClkEnable 0x800 #define bBandgapMbiasPowerUp 0x10000 #define bAD11SHGain 0xc0000 #define bAD11InputRange 0x700000 #define bAD11OPCurrent 0x3800000 #define bIPathLoopback 0x4000000 #define bQPathLoopback 0x8000000 #define bAFELoopback 0x10000000 #define bDA10Swing 0x7e0 #define bDA10Reverse 0x800 #define bDAClkSource 0x1000 #define bAD7InputRange 0x6000 #define bAD7Gain 0x38000 #define bAD7OutputCMMode 0x40000 #define bAD7InputCMMode 0x380000 #define bAD7Current 0xc00000 #define bRegulatorAdjust 0x7000000 #define bAD11PowerUpAtTx 0x1 #define bDA10PSAtTx 0x10 #define bAD11PowerUpAtRx 0x100 #define bDA10PSAtRx 0x1000 #define bCCKRxAGCFormat 0x200 #define bPSDFFTSamplepPoint 0xc000 #define bPSDAverageNum 0x3000 #define bIQPathControl 0xc00 #define bPSDFreq 0x3ff #define bPSDAntennaPath 0x30 #define bPSDIQSwitch 0x40 #define bPSDRxTrigger 0x400000 #define bPSDTxTrigger 0x80000000 #define bPSDSineToneScale 0x7f000000 #define bPSDReport 0xffff /* 3. Page9(0x900) */ #define bOFDMTxSC 0x30000000 /* Useless */ #define bCCKTxOn 0x1 #define bOFDMTxOn 0x2 #define bDebugPage 0xfff /* reset debug page and also HWord, LWord */ #define bDebugItem 0xff /* reset debug page and LWord */ #define bAntL 0x10 #define bAntNonHT 0x100 #define bAntHT1 0x1000 #define bAntHT2 0x10000 #define bAntHT1S1 0x100000 #define bAntNonHTS1 0x1000000 /* 4. PageA(0xA00) */ #define bCCKBBMode 0x3 /* Useless */ #define bCCKTxPowerSaving 0x80 #define bCCKRxPowerSaving 0x40 #define bCCKSideBand 0x10 /* Reg 0xa00 rCCK0_System 20/40 switch */ #define bCCKScramble 0x8 /* Useless */ #define bCCKAntDiversity 0x8000 #define bCCKCarrierRecovery 0x4000 #define bCCKTxRate 0x3000 #define bCCKDCCancel 0x0800 #define bCCKISICancel 0x0400 #define bCCKMatchFilter 0x0200 #define bCCKEqualizer 0x0100 #define bCCKPreambleDetect 0x800000 #define bCCKFastFalseCCA 0x400000 #define bCCKChEstStart 0x300000 #define bCCKCCACount 0x080000 #define bCCKcs_lim 0x070000 #define bCCKBistMode 0x80000000 #define bCCKCCAMask 0x40000000 #define bCCKTxDACPhase 0x4 #define bCCKRxADCPhase 0x20000000 /* r_rx_clk */ #define bCCKr_cp_mode0 0x0100 #define bCCKTxDCOffset 0xf0 #define bCCKRxDCOffset 0xf #define bCCKCCAMode 0xc000 #define bCCKFalseCS_lim 0x3f00 #define bCCKCS_ratio 0xc00000 #define bCCKCorgBit_sel 0x300000 #define bCCKPD_lim 0x0f0000 #define bCCKNewCCA 0x80000000 #define bCCKRxHPofIG 0x8000 #define bCCKRxIG 0x7f00 #define bCCKLNAPolarity 0x800000 #define bCCKRx1stGain 0x7f0000 #define bCCKRFExtend 0x20000000 /* CCK Rx Iinital gain polarity */ #define bCCKRxAGCSatLevel 0x1f000000 #define bCCKRxAGCSatCount 0xe0 #define bCCKRxRFSettle 0x1f /* AGCsamp_dly */ #define bCCKFixedRxAGC 0x8000 /* #define bCCKRxAGCFormat 0x4000 */ /* remove to HSSI register 0x824 */ #define bCCKAntennaPolarity 0x2000 #define bCCKTxFilterType 0x0c00 #define bCCKRxAGCReportType 0x0300 #define bCCKRxDAGCEn 0x80000000 #define bCCKRxDAGCPeriod 0x20000000 #define bCCKRxDAGCSatLevel 0x1f000000 #define bCCKTimingRecovery 0x800000 #define bCCKTxC0 0x3f0000 #define bCCKTxC1 0x3f000000 #define bCCKTxC2 0x3f #define bCCKTxC3 0x3f00 #define bCCKTxC4 0x3f0000 #define bCCKTxC5 0x3f000000 #define bCCKTxC6 0x3f #define bCCKTxC7 0x3f00 #define bCCKDebugPort 0xff0000 #define bCCKDACDebug 0x0f000000 #define bCCKFalseAlarmEnable 0x8000 #define bCCKFalseAlarmRead 0x4000 #define bCCKTRSSI 0x7f #define bCCKRxAGCReport 0xfe #define bCCKRxReport_AntSel 0x80000000 #define bCCKRxReport_MFOff 0x40000000 #define bCCKRxRxReport_SQLoss 0x20000000 #define bCCKRxReport_Pktloss 0x10000000 #define bCCKRxReport_Lockedbit 0x08000000 #define bCCKRxReport_RateError 0x04000000 #define bCCKRxReport_RxRate 0x03000000 #define bCCKRxFACounterLower 0xff #define bCCKRxFACounterUpper 0xff000000 #define bCCKRxHPAGCStart 0xe000 #define bCCKRxHPAGCFinal 0x1c00 #define bCCKRxFalseAlarmEnable 0x8000 #define bCCKFACounterFreeze 0x4000 #define bCCKTxPathSel 0x10000000 #define bCCKDefaultRxPath 0xc000000 #define bCCKOptionRxPath 0x3000000 /* 5. PageC(0xC00) */ #define bNumOfSTF 0x3 /* Useless */ #define bShift_L 0xc0 #define bGI_TH 0xc #define bRxPathA 0x1 #define bRxPathB 0x2 #define bRxPathC 0x4 #define bRxPathD 0x8 #define bTxPathA 0x1 #define bTxPathB 0x2 #define bTxPathC 0x4 #define bTxPathD 0x8 #define bTRSSIFreq 0x200 #define bADCBackoff 0x3000 #define bDFIRBackoff 0xc000 #define bTRSSILatchPhase 0x10000 #define bRxIDCOffset 0xff #define bRxQDCOffset 0xff00 #define bRxDFIRMode 0x1800000 #define bRxDCNFType 0xe000000 #define bRXIQImb_A 0x3ff #define bRXIQImb_B 0xfc00 #define bRXIQImb_C 0x3f0000 #define bRXIQImb_D 0xffc00000 #define bDC_dc_Notch 0x60000 #define bRxNBINotch 0x1f000000 #define bPD_TH 0xf #define bPD_TH_Opt2 0xc000 #define bPWED_TH 0x700 #define bIfMF_Win_L 0x800 #define bPD_Option 0x1000 #define bMF_Win_L 0xe000 #define bBW_Search_L 0x30000 #define bwin_enh_L 0xc0000 #define bBW_TH 0x700000 #define bED_TH2 0x3800000 #define bBW_option 0x4000000 #define bRatio_TH 0x18000000 #define bWindow_L 0xe0000000 #define bSBD_Option 0x1 #define bFrame_TH 0x1c #define bFS_Option 0x60 #define bDC_Slope_check 0x80 #define bFGuard_Counter_DC_L 0xe00 #define bFrame_Weight_Short 0x7000 #define bSub_Tune 0xe00000 #define bFrame_DC_Length 0xe000000 #define bSBD_start_offset 0x30000000 #define bFrame_TH_2 0x7 #define bFrame_GI2_TH 0x38 #define bGI2_Sync_en 0x40 #define bSarch_Short_Early 0x300 #define bSarch_Short_Late 0xc00 #define bSarch_GI2_Late 0x70000 #define bCFOAntSum 0x1 #define bCFOAcc 0x2 #define bCFOStartOffset 0xc #define bCFOLookBack 0x70 #define bCFOSumWeight 0x80 #define bDAGCEnable 0x10000 #define bTXIQImb_A 0x3ff #define bTXIQImb_B 0xfc00 #define bTXIQImb_C 0x3f0000 #define bTXIQImb_D 0xffc00000 #define bTxIDCOffset 0xff #define bTxQDCOffset 0xff00 #define bTxDFIRMode 0x10000 #define bTxPesudoNoiseOn 0x4000000 #define bTxPesudoNoise_A 0xff #define bTxPesudoNoise_B 0xff00 #define bTxPesudoNoise_C 0xff0000 #define bTxPesudoNoise_D 0xff000000 #define bCCADropOption 0x20000 #define bCCADropThres 0xfff00000 #define bEDCCA_H 0xf #define bEDCCA_L 0xf0 #define bLambda_ED 0x300 #define bRxInitialGain 0x7f #define bRxAntDivEn 0x80 #define bRxAGCAddressForLNA 0x7f00 #define bRxHighPowerFlow 0x8000 #define bRxAGCFreezeThres 0xc0000 #define bRxFreezeStep_AGC1 0x300000 #define bRxFreezeStep_AGC2 0xc00000 #define bRxFreezeStep_AGC3 0x3000000 #define bRxFreezeStep_AGC0 0xc000000 #define bRxRssi_Cmp_En 0x10000000 #define bRxQuickAGCEn 0x20000000 #define bRxAGCFreezeThresMode 0x40000000 #define bRxOverFlowCheckType 0x80000000 #define bRxAGCShift 0x7f #define bTRSW_Tri_Only 0x80 #define bPowerThres 0x300 #define bRxAGCEn 0x1 #define bRxAGCTogetherEn 0x2 #define bRxAGCMin 0x4 #define bRxHP_Ini 0x7 #define bRxHP_TRLNA 0x70 #define bRxHP_RSSI 0x700 #define bRxHP_BBP1 0x7000 #define bRxHP_BBP2 0x70000 #define bRxHP_BBP3 0x700000 #define bRSSI_H 0x7f0000 /* the threshold for high power */ #define bRSSI_Gen 0x7f000000 /* the threshold for ant diversity */ #define bRxSettle_TRSW 0x7 #define bRxSettle_LNA 0x38 #define bRxSettle_RSSI 0x1c0 #define bRxSettle_BBP 0xe00 #define bRxSettle_RxHP 0x7000 #define bRxSettle_AntSW_RSSI 0x38000 #define bRxSettle_AntSW 0xc0000 #define bRxProcessTime_DAGC 0x300000 #define bRxSettle_HSSI 0x400000 #define bRxProcessTime_BBPPW 0x800000 #define bRxAntennaPowerShift 0x3000000 #define bRSSITableSelect 0xc000000 #define bRxHP_Final 0x7000000 #define bRxHTSettle_BBP 0x7 #define bRxHTSettle_HSSI 0x8 #define bRxHTSettle_RxHP 0x70 #define bRxHTSettle_BBPPW 0x80 #define bRxHTSettle_Idle 0x300 #define bRxHTSettle_Reserved 0x1c00 #define bRxHTRxHPEn 0x8000 #define bRxHTAGCFreezeThres 0x30000 #define bRxHTAGCTogetherEn 0x40000 #define bRxHTAGCMin 0x80000 #define bRxHTAGCEn 0x100000 #define bRxHTDAGCEn 0x200000 #define bRxHTRxHP_BBP 0x1c00000 #define bRxHTRxHP_Final 0xe0000000 #define bRxPWRatioTH 0x3 #define bRxPWRatioEn 0x4 #define bRxMFHold 0x3800 #define bRxPD_Delay_TH1 0x38 #define bRxPD_Delay_TH2 0x1c0 #define bRxPD_DC_COUNT_MAX 0x600 /* #define bRxMF_Hold 0x3800 */ #define bRxPD_Delay_TH 0x8000 #define bRxProcess_Delay 0xf0000 #define bRxSearchrange_GI2_Early 0x700000 #define bRxFrame_Guard_Counter_L 0x3800000 #define bRxSGI_Guard_L 0xc000000 #define bRxSGI_Search_L 0x30000000 #define bRxSGI_TH 0xc0000000 #define bDFSCnt0 0xff #define bDFSCnt1 0xff00 #define bDFSFlag 0xf0000 #define bMFWeightSum 0x300000 #define bMinIdxTH 0x7f000000 #define bDAFormat 0x40000 #define bTxChEmuEnable 0x01000000 #define bTRSWIsolation_A 0x7f #define bTRSWIsolation_B 0x7f00 #define bTRSWIsolation_C 0x7f0000 #define bTRSWIsolation_D 0x7f000000 #define bExtLNAGain 0x7c00 /* 6. PageE(0xE00) */ #define bSTBCEn 0x4 /* Useless */ #define bAntennaMapping 0x10 #define bNss 0x20 #define bCFOAntSumD 0x200 #define bPHYCounterReset 0x8000000 #define bCFOReportGet 0x4000000 #define bOFDMContinueTx 0x10000000 #define bOFDMSingleCarrier 0x20000000 #define bOFDMSingleTone 0x40000000 /* #define bRxPath1 0x01 */ /* #define bRxPath2 0x02 */ /* #define bRxPath3 0x04 */ /* #define bRxPath4 0x08 */ /* #define bTxPath1 0x10 */ /* #define bTxPath2 0x20 */ #define bHTDetect 0x100 #define bCFOEn 0x10000 #define bCFOValue 0xfff00000 #define bSigTone_Re 0x3f #define bSigTone_Im 0x7f00 #define bCounter_CCA 0xffff #define bCounter_ParityFail 0xffff0000 #define bCounter_RateIllegal 0xffff #define bCounter_CRC8Fail 0xffff0000 #define bCounter_MCSNoSupport 0xffff #define bCounter_FastSync 0xffff #define bShortCFO 0xfff #define bShortCFOTLength 12 /* total */ #define bShortCFOFLength 11 /* fraction */ #define bLongCFO 0x7ff #define bLongCFOTLength 11 #define bLongCFOFLength 11 #define bTailCFO 0x1fff #define bTailCFOTLength 13 #define bTailCFOFLength 12 #define bmax_en_pwdB 0xffff #define bCC_power_dB 0xffff0000 #define bnoise_pwdB 0xffff #define bPowerMeasTLength 10 #define bPowerMeasFLength 3 #define bRx_HT_BW 0x1 #define bRxSC 0x6 #define bRx_HT 0x8 #define bNB_intf_det_on 0x1 #define bIntf_win_len_cfg 0x30 #define bNB_Intf_TH_cfg 0x1c0 #define bRFGain 0x3f #define bTableSel 0x40 #define bTRSW 0x80 #define bRxSNR_A 0xff #define bRxSNR_B 0xff00 #define bRxSNR_C 0xff0000 #define bRxSNR_D 0xff000000 #define bSNREVMTLength 8 #define bSNREVMFLength 1 #define bCSI1st 0xff #define bCSI2nd 0xff00 #define bRxEVM1st 0xff0000 #define bRxEVM2nd 0xff000000 #define bSIGEVM 0xff #define bPWDB 0xff00 #define bSGIEN 0x10000 #define bSFactorQAM1 0xf /* Useless */ #define bSFactorQAM2 0xf0 #define bSFactorQAM3 0xf00 #define bSFactorQAM4 0xf000 #define bSFactorQAM5 0xf0000 #define bSFactorQAM6 0xf0000 #define bSFactorQAM7 0xf00000 #define bSFactorQAM8 0xf000000 #define bSFactorQAM9 0xf0000000 #define bCSIScheme 0x100000 #define bNoiseLvlTopSet 0x3 /* Useless */ #define bChSmooth 0x4 #define bChSmoothCfg1 0x38 #define bChSmoothCfg2 0x1c0 #define bChSmoothCfg3 0xe00 #define bChSmoothCfg4 0x7000 #define bMRCMode 0x800000 #define bTHEVMCfg 0x7000000 #define bLoopFitType 0x1 /* Useless */ #define bUpdCFO 0x40 #define bUpdCFOOffData 0x80 #define bAdvUpdCFO 0x100 #define bAdvTimeCtrl 0x800 #define bUpdClko 0x1000 #define bFC 0x6000 #define bTrackingMode 0x8000 #define bPhCmpEnable 0x10000 #define bUpdClkoLTF 0x20000 #define bComChCFO 0x40000 #define bCSIEstiMode 0x80000 #define bAdvUpdEqz 0x100000 #define bUChCfg 0x7000000 #define bUpdEqz 0x8000000 #define bTxAGCRate18_06 0x7f7f7f7f /* Useless */ #define bTxAGCRate54_24 0x7f7f7f7f #define bTxAGCRateMCS32 0x7f #define bTxAGCRateCCK 0x7f00 #define bTxAGCRateMCS3_MCS0 0x7f7f7f7f #define bTxAGCRateMCS7_MCS4 0x7f7f7f7f #define bTxAGCRateMCS11_MCS8 0x7f7f7f7f #define bTxAGCRateMCS15_MCS12 0x7f7f7f7f /* Rx Pseduo noise */ #define bRxPesudoNoiseOn 0x20000000 /* Useless */ #define bRxPesudoNoise_A 0xff #define bRxPesudoNoise_B 0xff00 #define bRxPesudoNoise_C 0xff0000 #define bRxPesudoNoise_D 0xff000000 #define bPesudoNoiseState_A 0xffff #define bPesudoNoiseState_B 0xffff0000 #define bPesudoNoiseState_C 0xffff #define bPesudoNoiseState_D 0xffff0000 /* 7. RF Register * Zebra1 */ #define bZebra1_HSSIEnable 0x8 /* Useless */ #define bZebra1_TRxControl 0xc00 #define bZebra1_TRxGainSetting 0x07f #define bZebra1_RxCorner 0xc00 #define bZebra1_TxChargePump 0x38 #define bZebra1_RxChargePump 0x7 #define bZebra1_ChannelNum 0xf80 #define bZebra1_TxLPFBW 0x400 #define bZebra1_RxLPFBW 0x600 /* Zebra4 */ #define bRTL8256RegModeCtrl1 0x100 /* Useless */ #define bRTL8256RegModeCtrl0 0x40 #define bRTL8256_TxLPFBW 0x18 #define bRTL8256_RxLPFBW 0x600 /* RTL8258 */ #define bRTL8258_TxLPFBW 0xc /* Useless */ #define bRTL8258_RxLPFBW 0xc00 #define bRTL8258_RSSILPFBW 0xc0 /* * Other Definition * */ /* byte endable for sb_write */ #define bByte0 0x1 /* Useless */ #define bByte1 0x2 #define bByte2 0x4 #define bByte3 0x8 #define bWord0 0x3 #define bWord1 0xc #define bDWord 0xf /* for PutRegsetting & GetRegSetting BitMask */ #define bMaskByte0 0xff /* Reg 0xc50 rOFDM0_XAAGCCore~0xC6f */ #define bMaskByte1 0xff00 #define bMaskByte2 0xff0000 #define bMaskByte3 0xff000000 #define bMaskHWord 0xffff0000 #define bMaskLWord 0x0000ffff #define bMaskDWord 0xffffffff #define bMaskH4Bits 0xf0000000 #define bMaskH3Bytes 0xffffff00 #define bMaskOFDM_D 0xffc00000 #define bMaskCCK 0x3f3f3f3f #define bMask12Bits 0xfff /* for PutRFRegsetting & GetRFRegSetting BitMask */ #if (RTL92SE_FPGA_VERIFY == 1) /* #define bMask12Bits 0xfff */ /* RF Reg mask bits */ /* #define bMask20Bits 0xfff */ /* RF Reg mask bits T65 RF */ #define bRFRegOffsetMask 0xfff #else /* #define bMask12Bits 0xfffff */ /* RF Reg mask bits */ /* #define bMask20Bits 0xfffff */ /* RF Reg mask bits T65 RF */ #define bRFRegOffsetMask 0xfffff #endif #define bEnable 0x1 /* Useless */ #define bDisable 0x0 #define LeftAntenna 0x0 /* Useless */ #define RightAntenna 0x1 #define tCheckTxStatus 500 /* 500ms */ /* Useless */ #define tUpdateRxCounter 100 /* 100ms */ #define rateCCK 0 /* Useless */ #define rateOFDM 1 #define rateHT 2 /* define Register-End */ #define bPMAC_End 0x1ff /* Useless */ #define bFPGAPHY0_End 0x8ff #define bFPGAPHY1_End 0x9ff #define bCCKPHY0_End 0xaff #define bOFDMPHY0_End 0xcff #define bOFDMPHY1_End 0xdff /* define max debug item in each debug page * #define bMaxItem_FPGA_PHY0 0x9 * #define bMaxItem_FPGA_PHY1 0x3 * #define bMaxItem_PHY_11B 0x16 * #define bMaxItem_OFDM_PHY0 0x29 * #define bMaxItem_OFDM_PHY1 0x0 */ #define bPMACControl 0x0 /* Useless */ #define bWMACControl 0x1 #define bWNICControl 0x2 #define RCR_AAP BIT(0) /* accept all physical address */ #define RCR_APM BIT(1) /* accept physical match */ #define RCR_AM BIT(2) /* accept multicast */ #define RCR_AB BIT(3) /* accept broadcast */ #define RCR_ACRC32 BIT(5) /* accept error packet */ #define RCR_9356SEL BIT(6) #define RCR_AICV BIT(9) /* Accept ICV error packet */ #define RCR_RXFTH0 (BIT(13) | BIT(14) | BIT(15)) /* Rx FIFO threshold */ #define RCR_ADF BIT(18) /* Accept Data(frame type) frame */ #define RCR_ACF BIT(19) /* Accept control frame */ #define RCR_AMF BIT(20) /* Accept management frame */ #define RCR_ADD3 BIT(21) #define RCR_APWRMGT BIT(22) /* Accept power management packet */ #define RCR_CBSSID BIT(23) /* Accept BSSID match packet */ #define RCR_ENMARP BIT(28) /* enable mac auto reset phy */ #define RCR_EnCS1 BIT(29) /* enable carrier sense method 1 */ #define RCR_EnCS2 BIT(30) /* enable carrier sense method 2 */ #define RCR_OnlyErlPkt BIT(31) /* Rx Early mode is performed for packet size greater than 1536 */ /*--------------------------Define Parameters-------------------------------*/ #endif /* __INC_HAL8192SPHYREG_H */