/****************************************************************************** * * Copyright(c) 2007 - 2017 Realtek Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * *****************************************************************************/ #ifndef __RTL8188E_HAL_H__ #define __RTL8188E_HAL_H__ /* #include "hal_com.h" */ #include "hal_data.h" /* include HAL Related header after HAL Related compiling flags */ #include "rtl8188e_spec.h" #include "Hal8188EPhyReg.h" #include "Hal8188EPhyCfg.h" #include "rtl8188e_rf.h" #include "rtl8188e_dm.h" #include "rtl8188e_recv.h" #include "rtl8188e_xmit.h" #include "rtl8188e_cmd.h" #include "rtl8188e_led.h" #include "Hal8188EPwrSeq.h" #ifdef DBG_CONFIG_ERROR_DETECT #include "rtl8188e_sreset.h" #endif /* --------------------------------------------------------------------- */ /* RTL8188E Power Configuration CMDs for USB/SDIO/PCIE interfaces */ /* --------------------------------------------------------------------- */ #define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow #define Rtl8188E_NIC_RF_OFF_FLOW rtl8188E_radio_off_flow #define Rtl8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow #define Rtl8188E_NIC_ENABLE_FLOW rtl8188E_card_enable_flow #define Rtl8188E_NIC_SUSPEND_FLOW rtl8188E_suspend_flow #define Rtl8188E_NIC_RESUME_FLOW rtl8188E_resume_flow #define Rtl8188E_NIC_PDN_FLOW rtl8188E_hwpdn_flow #define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow #define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188E_leave_lps_flow #define MAX_FW_8188E_SIZE 0x8000 /* 32768, 32k / 16384, 16k */ #define FW_8188E_SIZE 0x4000 /* 16384, 16k */ #define FW_8188E_SIZE_2 0x8000 /* 32768, 32k */ #define FW_8188E_START_ADDRESS 0x1000 #define FW_8188E_END_ADDRESS 0x1FFF /* 0x5FFF */ #define IS_FW_HEADER_EXIST_88E(_pFwHdr) ((le16_to_cpu(_pFwHdr->Signature) & 0xFFF0) == 0x88E0) typedef struct _RT_FIRMWARE_8188E { FIRMWARE_SOURCE eFWSource; #ifdef CONFIG_EMBEDDED_FWIMG u8 *szFwBuffer; #else u8 szFwBuffer[MAX_FW_8188E_SIZE]; #endif u32 ulFwLength; } RT_FIRMWARE_8188E, *PRT_FIRMWARE_8188E; /* * This structure must be cared byte-ordering * */ typedef struct _RT_8188E_FIRMWARE_HDR { /* 8-byte alinment required */ /* --- LONG WORD 0 ---- */ u16 Signature; /* 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut */ u8 Category; /* AP/NIC and USB/PCI */ u8 Function; /* Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions */ u16 Version; /* FW Version */ u8 Subversion; /* FW Subversion, default 0x00 */ u16 Rsvd1; /* --- LONG WORD 1 ---- */ u8 Month; /* Release time Month field */ u8 Date; /* Release time Date field */ u8 Hour; /* Release time Hour field */ u8 Minute; /* Release time Minute field */ u16 RamCodeSize; /* The size of RAM code */ u8 Foundry; u8 Rsvd2; /* --- LONG WORD 2 ---- */ u32 SvnIdx; /* The SVN entry index */ u32 Rsvd3; /* --- LONG WORD 3 ---- */ u32 Rsvd4; u32 Rsvd5; } RT_8188E_FIRMWARE_HDR, *PRT_8188E_FIRMWARE_HDR; #define DRIVER_EARLY_INT_TIME_8188E 0x05 #define BCN_DMA_ATIME_INT_TIME_8188E 0x02 /* #define MAX_RX_DMA_BUFFER_SIZE_88E 0x2400 */ /* 9k for 88E nornal chip , */ /* MaxRxBuff=10k-max(TxReportSize(64*8), WOLPattern(16*24)) */ #ifdef CONFIG_USB_HCI #define RX_DMA_SIZE_88E(__Adapter) 0x2800 #else #define RX_DMA_SIZE_88E(__Adapter) ((!IS_VENDOR_8188E_I_CUT_SERIES(__Adapter))?0x2800:0x4000) #endif #ifdef CONFIG_WOWLAN #define RESV_FMWF (WKFMCAM_SIZE * MAX_WKFM_CAM_NUM) /* 16 entries, for each is 24 bytes*/ #else #define RESV_FMWF 0 #endif #define RX_DMA_RESERVD_FW_FEATURE 0x200 /* for tx report (64*8) */ #define MAX_RX_DMA_BUFFER_SIZE_88E(__Adapter) (RX_DMA_SIZE_88E(__Adapter)-RX_DMA_RESERVD_FW_FEATURE) #define MAX_TX_REPORT_BUFFER_SIZE 0x0400 /* 1k */ #define PAGE_SIZE_TX_88E PAGE_SIZE_128 /* Note: We will divide number of page equally for each queue other than public queue! * 22k = 22528 bytes = 176 pages (@page = 128 bytes) * BCN rsvd_page_num = MAX_BEACON_LEN / PAGE_SIZE_TX_88E * 1 ps-poll / 1 null-data /1 prob_rsp /1 QOS null-data = 4 pages */ #define BCNQ_PAGE_NUM_88E (MAX_BEACON_LEN / PAGE_SIZE_TX_88E + 4) /*0x09*/ /* For WoWLan , more reserved page */ #ifdef CONFIG_WOWLAN /* 1 ArpRsp + 2 NbrAdv + 2 NDPInfo + 1 RCI + 1 AOAC = 7 pages */ #define WOWLAN_PAGE_NUM_88E 0x07 #else #define WOWLAN_PAGE_NUM_88E 0x00 #endif /* Note: Tx FIFO Size : previous CUT:22K /I_CUT after:32KB Tx page Size : 128B Total page numbers : 176(0xB0) / 256(0x100) */ #ifdef CONFIG_USB_HCI #define TOTAL_PAGE_NUMBER_88E(_Adapter) (0xB0 - 1) #else #define TOTAL_PAGE_NUMBER_88E(_Adapter) ((IS_VENDOR_8188E_I_CUT_SERIES(_Adapter)?0x100:0xB0) - 1)/* must reserved 1 page for dma issue */ #endif #define TX_TOTAL_PAGE_NUMBER_88E(_Adapter) (TOTAL_PAGE_NUMBER_88E(_Adapter) - BCNQ_PAGE_NUM_88E - WOWLAN_PAGE_NUM_88E) #define TX_PAGE_BOUNDARY_88E(_Adapter) (TX_TOTAL_PAGE_NUMBER_88E(_Adapter) + 1) /* beacon header start address */ #define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_88E(_Adapter) TX_TOTAL_PAGE_NUMBER_88E(_Adapter) #define WMM_NORMAL_TX_PAGE_BOUNDARY_88E(_Adapter) (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_88E(_Adapter) + 1) /* For Normal Chip Setting * (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER_8723B */ #define NORMAL_PAGE_NUM_HPQ_88E 0x0 #define NORMAL_PAGE_NUM_LPQ_88E 0x09 #define NORMAL_PAGE_NUM_NPQ_88E 0x0 /* Note: For Normal Chip Setting, modify later */ #define WMM_NORMAL_PAGE_NUM_HPQ_88E 0x29 #define WMM_NORMAL_PAGE_NUM_LPQ_88E 0x1C #define WMM_NORMAL_PAGE_NUM_NPQ_88E 0x1C /* ------------------------------------------------------------------------- * Chip specific * ------------------------------------------------------------------------- */ #define CHIP_BONDING_IDENTIFIER(_value) (((_value)>>22) & 0x3) #define CHIP_BONDING_92C_1T2R 0x1 #define CHIP_BONDING_88C_USB_MCARD 0x2 #define CHIP_BONDING_88C_USB_HP 0x1 /* ------------------------------------------------------------------------- * Channel Plan * ------------------------------------------------------------------------- */ #define EFUSE_REAL_CONTENT_LEN 512 #define EFUSE_MAP_LEN 128 #define EFUSE_MAX_SECTION 16 #define EFUSE_IC_ID_OFFSET 506 /* For some inferiority IC purpose. added by Roger, 2009.09.02. */ #define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN) /* * * To prevent out of boundary programming case, * leave 1byte and program full section * 9bytes + 1byt + 5bytes and pre 1byte. * For worst case: * | 1byte|----8bytes----|1byte|--5bytes--| * | | Reserved(14bytes) | * */ #define EFUSE_OOB_PROTECT_BYTES 15 /* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */ #define EFUSE_REAL_CONTENT_LEN_88E 256 #define EFUSE_MAP_LEN_88E 512 #define EFUSE_MAX_SECTION_88E 64 #define EFUSE_MAX_WORD_UNIT_88E 4 #define EFUSE_IC_ID_OFFSET_88E 506 /* For some inferiority IC purpose. added by Roger, 2009.09.02. */ #define AVAILABLE_EFUSE_ADDR_88E(addr) (addr < EFUSE_REAL_CONTENT_LEN_88E) /* To prevent out of boundary programming case, leave 1byte and program full section * 9bytes + 1byt + 5bytes and pre 1byte. * For worst case: * | 2byte|----8bytes----|1byte|--7bytes--| */ /* 92D */ #define EFUSE_OOB_PROTECT_BYTES_88E 18 /* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */ #define EFUSE_PROTECT_BYTES_BANK_88E 16 /* ******************************************************** * EFUSE for BT definition * ******************************************************** */ #define EFUSE_BT_REAL_CONTENT_LEN 1536 /* 512*3 */ #define EFUSE_BT_MAP_LEN 1024 /* 1k bytes */ #define EFUSE_BT_MAX_SECTION 128 /* 1024/8 */ #define EFUSE_PROTECT_BYTES_BANK 16 #define INCLUDE_MULTI_FUNC_BT(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT) #define INCLUDE_MULTI_FUNC_GPS(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS) /* #define IS_MULTI_FUNC_CHIP(_Adapter) (((((PHAL_DATA_TYPE)(_Adapter->HalData))->MultiFunc) & (RT_MULTI_FUNC_BT|RT_MULTI_FUNC_GPS)) ? _TRUE : _FALSE) */ /* #define RT_IS_FUNC_DISABLED(__pAdapter, __FuncBits) ( (__pAdapter)->DisabledFunctions & (__FuncBits) ) */ #ifdef CONFIG_PCI_HCI /* according to the define in the rtw_xmit.h, rtw_recv.h */ #define TX_DESC_NUM_8188EE TXDESC_NUM /* 128 */ #ifdef CONFIG_CONCURRENT_MODE /*#define BE_QUEUE_TX_DESC_NUM_8188EE (TXDESC_NUM<<1)*/ /* 256 */ #define BE_QUEUE_TX_DESC_NUM_8188EE ((TXDESC_NUM<<1)+(TXDESC_NUM>>1)) /* 320 */ /*#define BE_QUEUE_TX_DESC_NUM_8188EE ((TXDESC_NUM<<1)+TXDESC_NUM)*/ /* 384 */ #else #define BE_QUEUE_TX_DESC_NUM_8188EE TXDESC_NUM /* 128 */ /*#define BE_QUEUE_TX_DESC_NUM_8188EE (TXDESC_NUM+(TXDESC_NUM>>1)) */ /* 192 */ #endif void InterruptRecognized8188EE(PADAPTER Adapter, PRT_ISR_CONTENT pIsrContent); void UpdateInterruptMask8188EE(PADAPTER Adapter, u32 AddMSR, u32 AddMSR1, u32 RemoveMSR, u32 RemoveMSR1); #endif /* CONFIG_PCI_HCI */ /* rtl8188e_hal_init.c */ s32 rtl8188e_FirmwareDownload(PADAPTER padapter, BOOLEAN bUsedWoWLANFw); void _8051Reset88E(PADAPTER padapter); void rtl8188e_InitializeFirmwareVars(PADAPTER padapter); s32 InitLLTTable(PADAPTER padapter, u8 txpktbuf_bndy); /* EFuse */ u8 GetEEPROMSize8188E(PADAPTER padapter); void Hal_InitPGData88E(PADAPTER padapter); void Hal_EfuseParseIDCode88E(PADAPTER padapter, u8 *hwinfo); void Hal_ReadTxPowerInfo88E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseEEPROMVer88E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void rtl8188e_EfuseParseChnlPlan(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseCustomerID88E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_ReadAntennaDiversity88E(PADAPTER pAdapter, u8 *PROMContent, BOOLEAN AutoLoadFail); void Hal_ReadThermalMeter_88E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail); void Hal_EfuseParseXtal_8188E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseBoardType88E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_ReadPowerSavingMode88E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_ReadPAType_8188E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail); void Hal_ReadAmplifierType_8188E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail); void Hal_ReadRFEType_8188E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail); BOOLEAN HalDetectPwrDownMode88E(PADAPTER Adapter); #if defined(CONFIG_WOWLAN) || defined(CONFIG_AP_WOWLAN) void Hal_DetectWoWMode(PADAPTER pAdapter); #endif /* CONFIG_WOWLAN */ #ifdef CONFIG_RF_POWER_TRIM void Hal_ReadRFGainOffset(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail); #endif /*CONFIG_RF_POWER_TRIM*/ void InitBeaconParameters_8188e(_adapter *adapter); void SetBeaconRelatedRegisters8188E(PADAPTER padapter); void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc); void init_hal_spec_8188e(_adapter *adapter); void rtl8188e_start_thread(_adapter *padapter); void rtl8188e_stop_thread(_adapter *padapter); void rtw_IOL_cmd_tx_pkt_buf_dump(ADAPTER *Adapter, int data_len); #ifdef CONFIG_IOL_EFUSE_PATCH s32 rtl8188e_iol_efuse_patch(PADAPTER padapter); #endif/* CONFIG_IOL_EFUSE_PATCH */ void _InitTransferPageSize(PADAPTER padapter); u8 SetHwReg8188E(PADAPTER padapter, u8 variable, u8 *val); void GetHwReg8188E(PADAPTER padapter, u8 variable, u8 *val); u8 GetHalDefVar8188E( IN PADAPTER Adapter, IN HAL_DEF_VARIABLE eVariable, IN PVOID pValue ); #ifdef CONFIG_GPIO_API int rtl8188e_GpioFuncCheck(PADAPTER adapter, u8 gpio_num); #endif #endif /* __RTL8188E_HAL_H__ */