/****************************************************************************** * * Copyright(c) 2007 - 2013 Realtek Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * ******************************************************************************/ #ifndef __RTL8192E_HAL_H__ #define __RTL8192E_HAL_H__ //#include "hal_com.h" #if 1 #include "hal_data.h" #else #include "../hal/OUTSRC/odm_precomp.h" #endif //include HAL Related header after HAL Related compiling flags #include "rtl8192e_spec.h" #include "rtl8192e_rf.h" #include "rtl8192e_dm.h" #include "rtl8192e_recv.h" #include "rtl8192e_xmit.h" #include "rtl8192e_cmd.h" #include "rtl8192e_led.h" #include "Hal8192EPwrSeq.h" #include "Hal8192EPhyReg.h" #include "Hal8192EPhyCfg.h" #ifdef DBG_CONFIG_ERROR_DETECT #include "rtl8192e_sreset.h" #endif //--------------------------------------------------------------------- // RTL8192E From header //--------------------------------------------------------------------- #define RTL8192E_FW_IMG "rtl8192e/FW_NIC.bin" #define RTL8192E_FW_WW_IMG "rtl8192e/FW_WoWLAN.bin" #define RTL8192E_PHY_REG "rtl8192e/PHY_REG.txt" #define RTL8192E_PHY_RADIO_A "rtl8192e/RadioA.txt" #define RTL8192E_PHY_RADIO_B "rtl8192e/RadioB.txt" #define RTL8192E_TXPWR_TRACK "rtl8192e/TxPowerTrack.txt" #define RTL8192E_AGC_TAB "rtl8192e/AGC_TAB.txt" #define RTL8192E_PHY_MACREG "rtl8192e/MAC_REG.txt" #define RTL8192E_PHY_REG_PG "rtl8192e/PHY_REG_PG.txt" #define RTL8192E_PHY_REG_MP "rtl8192e/PHY_REG_MP.txt" #define RTL8192E_TXPWR_LMT "rtl8192e/TXPWR_LMT.txt" //--------------------------------------------------------------------- // RTL8192E Power Configuration CMDs for PCIe interface //--------------------------------------------------------------------- #define Rtl8192E_NIC_PWR_ON_FLOW rtl8192E_power_on_flow #define Rtl8192E_NIC_RF_OFF_FLOW rtl8192E_radio_off_flow #define Rtl8192E_NIC_DISABLE_FLOW rtl8192E_card_disable_flow #define Rtl8192E_NIC_ENABLE_FLOW rtl8192E_card_enable_flow #define Rtl8192E_NIC_SUSPEND_FLOW rtl8192E_suspend_flow #define Rtl8192E_NIC_RESUME_FLOW rtl8192E_resume_flow #define Rtl8192E_NIC_PDN_FLOW rtl8192E_hwpdn_flow #define Rtl8192E_NIC_LPS_ENTER_FLOW rtl8192E_enter_lps_flow #define Rtl8192E_NIC_LPS_LEAVE_FLOW rtl8192E_leave_lps_flow #if 1 // download firmware related data structure #define FW_SIZE_8192E 0x8000 // Compatible with RTL8192e Maximal RAM code size 32k #define FW_START_ADDRESS 0x1000 #define FW_END_ADDRESS 0x5FFF #define IS_FW_HEADER_EXIST_8192E(_pFwHdr) ((GET_FIRMWARE_HDR_SIGNATURE_8192E(_pFwHdr) &0xFFF0) == 0x92E0) typedef struct _RT_FIRMWARE_8192E { FIRMWARE_SOURCE eFWSource; #ifdef CONFIG_EMBEDDED_FWIMG u8* szFwBuffer; #else u8 szFwBuffer[FW_SIZE_8192E]; #endif u32 ulFwLength; } RT_FIRMWARE_8192E, *PRT_FIRMWARE_8192E; // // This structure must be cared byte-ordering // // Added by tynli. 2009.12.04. //===================================================== // Firmware Header(8-byte alinment required) //===================================================== //--- LONG WORD 0 ---- #define GET_FIRMWARE_HDR_SIGNATURE_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr, 0, 16) // 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut #define GET_FIRMWARE_HDR_CATEGORY_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr, 16, 8) // AP/NIC and USB/PCI #define GET_FIRMWARE_HDR_FUNCTION_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr, 24, 8) // Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions #define GET_FIRMWARE_HDR_VERSION_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+4, 0, 16)// FW Version #define GET_FIRMWARE_HDR_SUB_VER_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+4, 16, 8) // FW Subversion, default 0x00 #define GET_FIRMWARE_HDR_RSVD1_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+4, 24, 8) //--- LONG WORD 1 ---- #define GET_FIRMWARE_HDR_MONTH_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+8, 0, 8) // Release time Month field #define GET_FIRMWARE_HDR_DATE_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+8, 8, 8) // Release time Date field #define GET_FIRMWARE_HDR_HOUR_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+8, 16, 8)// Release time Hour field #define GET_FIRMWARE_HDR_MINUTE_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+8, 24, 8)// Release time Minute field #define GET_FIRMWARE_HDR_ROMCODE_SIZE_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+12, 0, 16)// The size of RAM code #define GET_FIRMWARE_HDR_RSVD2_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+12, 16, 16) //--- LONG WORD 2 ---- #define GET_FIRMWARE_HDR_SVN_IDX_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+16, 0, 32)// The SVN entry index #define GET_FIRMWARE_HDR_RSVD3_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+20, 0, 32) //--- LONG WORD 3 ---- #define GET_FIRMWARE_HDR_RSVD4_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 0, 32) #define GET_FIRMWARE_HDR_RSVD5_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+28, 0, 32) #endif // download firmware related data structure #define DRIVER_EARLY_INT_TIME_8192E 0x05 #define BCN_DMA_ATIME_INT_TIME_8192E 0x02 #define MAX_RX_DMA_BUFFER_SIZE_8192E 0x3d00 //0x3E80 //0x3FFF // RX 16K reserved for WOW ? #define TX_TOTAL_PAGE_NUMBER_8192E 243 //0x00~0xF3 totoal pages: F4 #define TX_PAGE_BOUNDARY_8192E (TX_TOTAL_PAGE_NUMBER_8192E + 1)//0xF4 ~0xFF ,Rserved 12 pages for BCN/PS-POLL.. #define TX_PAGE_LOAD_FW_BOUNDARY_8192E 0x47 //0xA5 #define TX_PAGE_BOUNDARY_WOWLAN_8192E 0xE0 // For Normal Chip Setting // (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER_92C #define NORMAL_PAGE_NUM_LPQ_8192E 0x0C #define NORMAL_PAGE_NUM_HPQ_8192E 0x08 #define NORMAL_PAGE_NUM_NPQ_8192E 0x00 #define NORMAL_PAGE_NUM_EPQ_8192E 0x00 //Note: For WMM Normal Chip Setting ,modify later #define WMM_NORMAL_PAGE_NUM_HPQ_8192E NORMAL_PAGE_NUM_HPQ_8192E #define WMM_NORMAL_PAGE_NUM_LPQ_8192E NORMAL_PAGE_NUM_LPQ_8192E #define WMM_NORMAL_PAGE_NUM_NPQ_8192E NORMAL_PAGE_NUM_NPQ_8192E //------------------------------------------------------------------------- // Chip specific //------------------------------------------------------------------------- //------------------------------------------------------------------------- // Channel Plan //------------------------------------------------------------------------- #define HWSET_MAX_SIZE_8192E 512 #define EFUSE_REAL_CONTENT_LEN_8192E 512 #define EFUSE_MAP_LEN_8192E 512 #define EFUSE_MAX_SECTION_8192E 64 #define EFUSE_MAX_WORD_UNIT_8192E 4 #define EFUSE_IC_ID_OFFSET_8192E 506 //For some inferiority IC purpose. added by Roger, 2009.09.02. #define AVAILABLE_EFUSE_ADDR_8192E(addr) (addr < EFUSE_REAL_CONTENT_LEN_8192E) // // To prevent out of boundary programming case, leave 1byte and program full section // 9bytes + 1byt + 5bytes and pre 1byte. // For worst case: // | 1byte|----8bytes----|1byte|--5bytes--| // | | Reserved(14bytes) | // #define EFUSE_OOB_PROTECT_BYTES_8192E 15 // PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. //======================================================== // EFUSE for BT definition //======================================================== #define EFUSE_BT_REAL_BANK_CONTENT_LEN_8192E 512 #define EFUSE_BT_REAL_CONTENT_LEN_8192E 1024 // 512*2 #define EFUSE_BT_MAP_LEN_8192E 1024 // 1k bytes #define EFUSE_BT_MAX_SECTION_8192E 128 // 1024/8 #define EFUSE_PROTECT_BYTES_BANK_8192E 16 #define EFUSE_MAX_BANK_8192E 3 //=========================================================== #define INCLUDE_MULTI_FUNC_BT(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT) #define INCLUDE_MULTI_FUNC_GPS(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS) //#define IS_MULTI_FUNC_CHIP(_Adapter) (((((PHAL_DATA_TYPE)(_Adapter->HalData))->MultiFunc) & (RT_MULTI_FUNC_BT|RT_MULTI_FUNC_GPS)) ? _TRUE : _FALSE) //#define RT_IS_FUNC_DISABLED(__pAdapter, __FuncBits) ( (__pAdapter)->DisabledFunctions & (__FuncBits) ) #define GetDefaultAdapter(padapter) padapter // rtl8812_hal_init.c void _8051Reset8192E(PADAPTER padapter); s32 FirmwareDownload8192E(PADAPTER Adapter, BOOLEAN bUsedWoWLANFw); void InitializeFirmwareVars8192E(PADAPTER padapter); s32 InitLLTTable8192E(PADAPTER padapter, u8 txpktbuf_bndy); // EFuse u8 GetEEPROMSize8192E(PADAPTER padapter); void hal_InitPGData_8192E(PADAPTER padapter, u8* PROMContent); void Hal_EfuseParseIDCode8192E(PADAPTER padapter, u8 *hwinfo); void Hal_ReadPROMVersion8192E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_ReadPowerSavingMode8192E(PADAPTER padapter, u8* hwinfo, BOOLEAN AutoLoadFail); void Hal_ReadTxPowerInfo8192E(PADAPTER padapter,u8* hwinfo,BOOLEAN AutoLoadFail); void Hal_ReadBoardType8192E(PADAPTER pAdapter,u8* hwinfo,BOOLEAN AutoLoadFail); void Hal_ReadThermalMeter_8192E(PADAPTER Adapter,u8* PROMContent,BOOLEAN AutoloadFail); void Hal_ReadChannelPlan8192E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseXtal_8192E(PADAPTER pAdapter,u8* hwinfo,BOOLEAN AutoLoadFail); void Hal_ReadAntennaDiversity8192E(PADAPTER pAdapter,u8* PROMContent,BOOLEAN AutoLoadFail); void Hal_ReadPAType_8192E(PADAPTER Adapter,u8* PROMContent, BOOLEAN AutoloadFail); void Hal_EfuseParseBTCoexistInfo8192E(PADAPTER Adapter, u8* hwinfo, BOOLEAN AutoLoadFail); u8 Hal_CrystalAFEAdjust(_adapter * Adapter); BOOLEAN HalDetectPwrDownMode8192E(PADAPTER Adapter); #ifdef CONFIG_WOWLAN void Hal_DetectWoWMode(PADAPTER pAdapter); #endif //CONFIG_WOWLAN /***********************************************************/ // RTL8192E-MAC Setting VOID _InitTxBufferBoundary_8192E(IN PADAPTER Adapter,IN u8 txpktbuf_bndy); VOID _InitPageBoundary_8192E(IN PADAPTER Adapter); //VOID _InitTransferPageSize_8192E(IN PADAPTER Adapter); VOID _InitDriverInfoSize_8192E(IN PADAPTER Adapter,IN u8 drvInfoSize); VOID _InitRxSetting_8192E(PADAPTER Adapter); VOID _InitRDGSetting_8192E(PADAPTER Adapter); void _InitID_8192E(IN PADAPTER Adapter); VOID _InitNetworkType_8192E(IN PADAPTER Adapter); VOID _InitWMACSetting_8192E(IN PADAPTER Adapter); VOID _InitAdaptiveCtrl_8192E(IN PADAPTER Adapter); VOID _InitEDCA_8192E( IN PADAPTER Adapter); VOID _InitRetryFunction_8192E( IN PADAPTER Adapter); VOID _InitBeaconParameters_8192E(IN PADAPTER Adapter); VOID _InitBeaconMaxError_8192E( IN PADAPTER Adapter, IN BOOLEAN InfraMode ); void _BBTurnOnBlock_8192E(PADAPTER padapter); void SetBeaconRelatedRegisters8192E(PADAPTER padapter); VOID hal_ReadRFType_8192E(PADAPTER Adapter); // RTL8192E-MAC Setting /***********************************************************/ void SetHwReg8192E(PADAPTER Adapter, u8 variable, u8* val); void GetHwReg8192E(PADAPTER Adapter, u8 variable, u8* val); u8 SetHalDefVar8192E( IN PADAPTER Adapter, IN HAL_DEF_VARIABLE eVariable, IN PVOID pValue ); u8 GetHalDefVar8192E( IN PADAPTER Adapter, IN HAL_DEF_VARIABLE eVariable, IN PVOID pValue ); void rtl8192e_set_hal_ops(struct hal_ops *pHalFunc); void rtl8192e_init_default_value(_adapter * padapter); // register void SetBcnCtrlReg(PADAPTER padapter, u8 SetBits, u8 ClearBits); void rtl8192e_start_thread(_adapter *padapter); void rtl8192e_stop_thread(_adapter *padapter); #endif //__RTL8192E_HAL_H__