/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/
#define _RTL8192E_MP_C_
#ifdef CONFIG_MP_INCLUDED

//#include <drv_types.h>
#include <rtl8192e_hal.h>



s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T		pDM_Odm = &(pHalData->odmpriv);


	if (!netif_running(padapter->pnetdev)) {
		RT_TRACE(_module_mp_, _drv_warning_, ("SetPowerTracking! Fail: interface not opened!\n"));
		return _FAIL;
	}

	if (check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE) == _FALSE) {
		RT_TRACE(_module_mp_, _drv_warning_, ("SetPowerTracking! Fail: not in MP mode!\n"));
		return _FAIL;
	}

	if (enable)
	{
			pDM_Odm->RFCalibrateInfo.bTXPowerTracking = _TRUE;
	}
	else
		pDM_Odm->RFCalibrateInfo.bTXPowerTrackingInit= _FALSE;

	return _SUCCESS;
}

void Hal_GetPowerTracking(PADAPTER padapter, u8 *enable)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T		pDM_Odm = &(pHalData->odmpriv);


	*enable = pDM_Odm->RFCalibrateInfo.TxPowerTrackControl;
}

static void Hal_disable_dm(PADAPTER padapter)
{
	u8 v8;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);

	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T		pDM_Odm = &(pHalData->odmpriv);


	//3 1. disable firmware dynamic mechanism
	// disable Power Training, Rate Adaptive
	v8 = rtw_read8(padapter, REG_BCN_CTRL);
	v8 &= ~EN_BCN_FUNCTION;
	rtw_write8(padapter, REG_BCN_CTRL, v8);

	//3 2. disable driver dynamic mechanism
	// disable Dynamic Initial Gain
	// disable High Power
	// disable Power Tracking
	Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE);

	// enable APK, LCK and IQK but disable power tracking
	pDM_Odm->RFCalibrateInfo.TxPowerTrackControl = _FALSE;
	Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _TRUE);
}

/*-----------------------------------------------------------------------------
 * Function:	mpt_SwitchRfSetting
 *
 * Overview:	Change RF Setting when we siwthc channel/rate/BW for MP.
 *
 * Input:       IN	PADAPTER				pAdapter
 *
 * Output:      NONE
 *
 * Return:      NONE
 *
 * Revised History:
 * When			Who		Remark
 * 01/08/2009	MHC		Suggestion from SD3 Willis for 92S series.
 * 01/09/2009	MHC		Add CCK modification for 40MHZ. Suggestion from SD3.
 *
 *---------------------------------------------------------------------------*/
void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter)
{	
	//HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
	struct mp_priv	*pmp = &pAdapter->mppriv;
	u1Byte				ChannelToSw = pmp->channel;
	ULONG				ulRateIdx = pmp->rateidx;
	ULONG				ulbandwidth = pmp->bandwidth;
	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(pAdapter);
	#if 0
	// <20120525, Kordan> Dynamic mechanism for APK, asked by Dennis.
		pmp->MptCtx.backup0x52_RF_A = (u1Byte)PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0);
		pmp->MptCtx.backup0x52_RF_B = (u1Byte)PHY_QueryRFReg(pAdapter, RF_PATH_B, RF_0x52, 0x000F0);
		PHY_SetRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0, 0xD);
		PHY_SetRFReg(pAdapter, RF_PATH_B, RF_0x52, 0x000F0, 0xD);
	#endif
	return ;
}
/*---------------------------hal\rtl8192c\MPT_Phy.c---------------------------*/

/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/
void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14)
{
	u32		TempVal = 0, TempVal2 = 0, TempVal3 = 0;
	u32		CurrCCKSwingVal = 0, CCKSwingIndex = 12;
	u8		i;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);


	// get current cck swing value and check 0xa22 & 0xa23 later to match the table.
	CurrCCKSwingVal = read_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord);

	if (!bInCH14)
	{
		// Readback the current bb cck swing value and compare with the table to
		// get the current swing index
		for (i = 0; i < CCK_TABLE_SIZE; i++)
		{
			if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch1_Ch13[i][0]) &&
				(((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch1_Ch13[i][1]))
			{
				CCKSwingIndex = i;
//				RT_TRACE(COMP_INIT, DBG_LOUD,("Ch1~13, Current reg0x%x = 0x%lx, CCKSwingIndex=0x%x\n",
//					(rCCK0_TxFilter1+2), CurrCCKSwingVal, CCKSwingIndex));
				break;
			}
		}

		//Write 0xa22 0xa23
		TempVal = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][0] +
				(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][1]<<8) ;


		//Write 0xa24 ~ 0xa27
		TempVal2 = 0;
		TempVal2 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][2] +
				(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][3]<<8) +
				(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][4]<<16 )+
				(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][5]<<24);

		//Write 0xa28  0xa29
		TempVal3 = 0;
		TempVal3 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][6] +
				(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][7]<<8) ;
	}
	else
	{
		for (i = 0; i < CCK_TABLE_SIZE; i++)
		{
			if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch14[i][0]) &&
				(((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch14[i][1]))
			{
				CCKSwingIndex = i;
//				RT_TRACE(COMP_INIT, DBG_LOUD,("Ch14, Current reg0x%x = 0x%lx, CCKSwingIndex=0x%x\n",
//					(rCCK0_TxFilter1+2), CurrCCKSwingVal, CCKSwingIndex));
				break;
			}
		}

		//Write 0xa22 0xa23
		TempVal = CCKSwingTable_Ch14[CCKSwingIndex][0] +
				(CCKSwingTable_Ch14[CCKSwingIndex][1]<<8) ;

		//Write 0xa24 ~ 0xa27
		TempVal2 = 0;
		TempVal2 = CCKSwingTable_Ch14[CCKSwingIndex][2] +
				(CCKSwingTable_Ch14[CCKSwingIndex][3]<<8) +
				(CCKSwingTable_Ch14[CCKSwingIndex][4]<<16 )+
				(CCKSwingTable_Ch14[CCKSwingIndex][5]<<24);

		//Write 0xa28  0xa29
		TempVal3 = 0;
		TempVal3 = CCKSwingTable_Ch14[CCKSwingIndex][6] +
				(CCKSwingTable_Ch14[CCKSwingIndex][7]<<8) ;
	}

	write_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord, TempVal);
	write_bbreg(Adapter, rCCK0_TxFilter2, bMaskDWord, TempVal2);
	write_bbreg(Adapter, rCCK0_DebugPort, bMaskLWord, TempVal3);
}

void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven)
{
	s32		TempCCk;
	u8		CCK_index, CCK_index_old=0;
	u8		Action = 0;	//0: no action, 1: even->odd, 2:odd->even
	u8		TimeOut = 100;
	s32		i = 0;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
	PMPT_CONTEXT	pMptCtx = &pAdapter->mppriv.MptCtx;

	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T		pDM_Odm = &(pHalData->odmpriv);


	if (!IS_92C_SERIAL(pHalData->VersionID))
		return;
#if 0
	while(PlatformAtomicExchange(&Adapter->IntrCCKRefCount, TRUE) == TRUE)
	{
		PlatformSleepUs(100);
		TimeOut--;
		if(TimeOut <= 0)
		{
			RTPRINT(FINIT, INIT_TxPower,
			 ("!!!MPT_CCKTxPowerAdjustbyIndex Wait for check CCK gain index too long!!!\n" ));
			break;
		}
	}
#endif
	if (beven && !pMptCtx->bMptIndexEven)	//odd->even
	{
		Action = 2;
		pMptCtx->bMptIndexEven = _TRUE;
	}
	else if (!beven && pMptCtx->bMptIndexEven)	//even->odd
	{
		Action = 1;
		pMptCtx->bMptIndexEven = _FALSE;
	}

	if (Action != 0)
	{
		//Query CCK default setting From 0xa24
		TempCCk = read_bbreg(pAdapter, rCCK0_TxFilter2, bMaskDWord) & bMaskCCK;
		for (i = 0; i < CCK_TABLE_SIZE; i++)
		{
			if (pDM_Odm->RFCalibrateInfo.bCCKinCH14)
			{
				if (_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch14[i][2], 4) == _TRUE)
				{
					CCK_index_old = (u8) i;
//					RTPRINT(FINIT, INIT_TxPower,("MPT_CCKTxPowerAdjustbyIndex: Initial reg0x%x = 0x%lx, CCK_index=0x%x, ch 14 %d\n",
//						rCCK0_TxFilter2, TempCCk, CCK_index_old, pHalData->bCCKinCH14));
					break;
				}
			}
			else
			{
				if (_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch1_Ch13[i][2], 4) == _TRUE)
				{
					CCK_index_old = (u8) i;
//					RTPRINT(FINIT, INIT_TxPower,("MPT_CCKTxPowerAdjustbyIndex: Initial reg0x%x = 0x%lx, CCK_index=0x%x, ch14 %d\n",
//						rCCK0_TxFilter2, TempCCk, CCK_index_old, pHalData->bCCKinCH14));
					break;
				}
			}
		}
		
		if (Action == 1) {
			if (CCK_index_old == 0)
				CCK_index_old = 1;
			CCK_index = CCK_index_old - 1;
		} else {
			CCK_index = CCK_index_old + 1;
		}

		if (CCK_index == CCK_TABLE_SIZE) {
			CCK_index = CCK_TABLE_SIZE -1;
			RT_TRACE(_module_mp_, _drv_info_, ("CCK_index == CCK_TABLE_SIZE\n"));
		}

//		RTPRINT(FINIT, INIT_TxPower,("MPT_CCKTxPowerAdjustbyIndex: new CCK_index=0x%x\n",
//			 CCK_index));

		//Adjust CCK according to gain index
		if (!pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
			rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch1_Ch13[CCK_index][0]);
			rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch1_Ch13[CCK_index][1]);
			rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch1_Ch13[CCK_index][2]);
			rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch1_Ch13[CCK_index][3]);
			rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch1_Ch13[CCK_index][4]);
			rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch1_Ch13[CCK_index][5]);
			rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch1_Ch13[CCK_index][6]);
			rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch1_Ch13[CCK_index][7]);
		} else {
			rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch14[CCK_index][0]);
			rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch14[CCK_index][1]);
			rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch14[CCK_index][2]);
			rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch14[CCK_index][3]);
			rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch14[CCK_index][4]);
			rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch14[CCK_index][5]);
			rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch14[CCK_index][6]);
			rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch14[CCK_index][7]);
		}
	}
#if 0
	RTPRINT(FINIT, INIT_TxPower,
	("MPT_CCKTxPowerAdjustbyIndex 0xa20=%x\n", PlatformEFIORead4Byte(Adapter, 0xa20)));

	PlatformAtomicExchange(&Adapter->IntrCCKRefCount, FALSE);
#endif
}
/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/

/*
 * SetChannel
 * Description
 *	Use H2C command to change channel,
 *	not only modify rf register, but also other setting need to be done.
 */
void Hal_SetChannel(PADAPTER pAdapter)
{
#if 0
	struct mp_priv *pmp = &pAdapter->mppriv;

//	SelectChannel(pAdapter, pmp->channel);
	set_channel_bwmode(pAdapter, pmp->channel, pmp->channel_offset, pmp->bandwidth);
#else
	u8 		eRFPath;

	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
	struct mp_priv	*pmp = &pAdapter->mppriv;
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T		pDM_Odm = &(pHalData->odmpriv);
	
	u8		channel = pmp->channel;
	u8		bandwidth = pmp->bandwidth;
	u8		rate = pmp->rateidx;


	// set RF channel register
	for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
	{
      		if(IS_HARDWARE_TYPE_8192D(pAdapter))
			_write_rfreg(pAdapter, eRFPath, ODM_CHANNEL, 0xFF, channel);
		else
			_write_rfreg(pAdapter, eRFPath, ODM_CHANNEL, 0x3FF, channel);
	}
	Hal_mpt_SwitchRfSetting(pAdapter);

	SelectChannel(pAdapter, channel);

	if (pHalData->CurrentChannel == 14 && !pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
		pDM_Odm->RFCalibrateInfo.bCCKinCH14 = _TRUE;
		Hal_MPT_CCKTxPowerAdjust(pAdapter, pDM_Odm->RFCalibrateInfo.bCCKinCH14);
	}
	else if (pHalData->CurrentChannel != 14 && pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
		pDM_Odm->RFCalibrateInfo.bCCKinCH14 = _FALSE;
		Hal_MPT_CCKTxPowerAdjust(pAdapter, pDM_Odm->RFCalibrateInfo.bCCKinCH14);
	}

#endif
}

/*
 * Notice
 *	Switch bandwitdth may change center frequency(channel)
 */
void Hal_SetBandwidth(PADAPTER pAdapter)
{
	struct mp_priv *pmp = &pAdapter->mppriv;


	SetBWMode(pAdapter, pmp->bandwidth, pmp->prime_channel_offset);
	//Hal_mpt_SwitchRfSetting(pAdapter);
}

void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 *TxPower)
{
	u32 tmpval = 0;


	// rf-A cck tx power
	write_bbreg(pAdapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, TxPower[RF_PATH_A]);
	tmpval = (TxPower[RF_PATH_A]<<16) | (TxPower[RF_PATH_A]<<8) | TxPower[RF_PATH_A];
	write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskH3Bytes, tmpval);

	// rf-B cck tx power
	write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, TxPower[RF_PATH_B]);
	tmpval = (TxPower[RF_PATH_B]<<16) | (TxPower[RF_PATH_B]<<8) | TxPower[RF_PATH_B];
	write_bbreg(pAdapter, rTxAGC_B_CCK1_55_Mcs32, bMaskH3Bytes, tmpval);

	RT_TRACE(_module_mp_, _drv_notice_,
		 ("-SetCCKTxPower: A[0x%02x] B[0x%02x]\n",
		  TxPower[RF_PATH_A], TxPower[RF_PATH_B]));
}

void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 *TxPower)
{
	u32 TxAGC = 0;
	u8 tmpval = 0;
	PMPT_CONTEXT	pMptCtx = &pAdapter->mppriv.MptCtx;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);


	// HT Tx-rf(A)
	tmpval = TxPower[RF_PATH_A];
	TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval;

	write_bbreg(pAdapter, rTxAGC_A_Rate18_06, bMaskDWord, TxAGC);
	write_bbreg(pAdapter, rTxAGC_A_Rate54_24, bMaskDWord, TxAGC);
	write_bbreg(pAdapter, rTxAGC_A_Mcs03_Mcs00, bMaskDWord, TxAGC);
	write_bbreg(pAdapter, rTxAGC_A_Mcs07_Mcs04, bMaskDWord, TxAGC);
	write_bbreg(pAdapter, rTxAGC_A_Mcs11_Mcs08, bMaskDWord, TxAGC);
	write_bbreg(pAdapter, rTxAGC_A_Mcs15_Mcs12, bMaskDWord, TxAGC);

	// HT Tx-rf(B)
	tmpval = TxPower[RF_PATH_B];
	TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval;

	write_bbreg(pAdapter, rTxAGC_B_Rate18_06, bMaskDWord, TxAGC);
	write_bbreg(pAdapter, rTxAGC_B_Rate54_24, bMaskDWord, TxAGC);
	write_bbreg(pAdapter, rTxAGC_B_Mcs03_Mcs00, bMaskDWord, TxAGC);
	write_bbreg(pAdapter, rTxAGC_B_Mcs07_Mcs04, bMaskDWord, TxAGC);
	write_bbreg(pAdapter, rTxAGC_B_Mcs11_Mcs08, bMaskDWord, TxAGC);
	write_bbreg(pAdapter, rTxAGC_B_Mcs15_Mcs12, bMaskDWord, TxAGC);

}

void Hal_SetAntennaPathPower(PADAPTER pAdapter)
{
	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
	u8 TxPowerLevel[MAX_RF_PATH];
	u8 rfPath;

	TxPowerLevel[RF_PATH_A] = pAdapter->mppriv.txpoweridx;
	TxPowerLevel[RF_PATH_B] = pAdapter->mppriv.txpoweridx_b;

	switch (pAdapter->mppriv.antenna_tx)
	{
		case ANTENNA_A:
		default:
			rfPath = RF_PATH_A;
			break;
		case ANTENNA_B:
			rfPath = RF_PATH_B;
			break;
		case ANTENNA_C:
			rfPath = RF_PATH_C;
			break;
	}

	switch (pHalData->rf_chip)
	{
		case RF_8225:
		case RF_8256:
		case RF_6052:
			Hal_SetCCKTxPower(pAdapter, TxPowerLevel);
			if (pAdapter->mppriv.rateidx < MPT_RATE_6M)	// CCK rate
				Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0);
			Hal_SetOFDMTxPower(pAdapter, TxPowerLevel);
		break;

		default:
			break;
	}
}

void Hal_SetTxPower(PADAPTER pAdapter)
{
	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
	u8 TxPower = pAdapter->mppriv.txpoweridx;
	u8 TxPowerLevel[MAX_RF_PATH];
	u8 rf, rfPath;

	for (rf = 0; rf < pHalData->NumTotalRFPath; rf++) {
		TxPowerLevel[rf] = TxPower;
	}

	switch (pAdapter->mppriv.antenna_tx)
	{
		case ANTENNA_A:
		default:
			rfPath = RF_PATH_A;
			break;
		case ANTENNA_B:
			rfPath = RF_PATH_B;
			break;
		case ANTENNA_C:
			rfPath = RF_PATH_C;
			break;
	}

	switch (pHalData->rf_chip)
	{
		// 2008/09/12 MH Test only !! We enable the TX power tracking for MP!!!!!
		// We should call normal driver API later!!
		case RF_8225:
		case RF_8256:
		case RF_6052:
			Hal_SetCCKTxPower(pAdapter, TxPowerLevel);
			if (pAdapter->mppriv.rateidx < MPT_RATE_6M)	// CCK rate
				Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0);
			Hal_SetOFDMTxPower(pAdapter, TxPowerLevel);
			break;

		default:
			break;
	}

//	SetCCKTxPower(pAdapter, TxPower);
//	SetOFDMTxPower(pAdapter, TxPower);
}

void Hal_SetTxAGCOffset(PADAPTER pAdapter, u32 ulTxAGCOffset)
{
	u32 TxAGCOffset_B, TxAGCOffset_C, TxAGCOffset_D,tmpAGC;

	TxAGCOffset_B = (ulTxAGCOffset&0x000000ff);
	TxAGCOffset_C = ((ulTxAGCOffset&0x0000ff00)>>8);
	TxAGCOffset_D = ((ulTxAGCOffset&0x00ff0000)>>16);

	tmpAGC = (TxAGCOffset_D<<8 | TxAGCOffset_C<<4 | TxAGCOffset_B);
	write_bbreg(pAdapter, rFPGA0_TxGainStage,
			(bXBTxAGC|bXCTxAGC|bXDTxAGC), tmpAGC);
}

void Hal_SetDataRate(PADAPTER pAdapter)
{
	Hal_mpt_SwitchRfSetting(pAdapter);
}

void Hal_SetAntenna(PADAPTER pAdapter)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);

	R_ANTENNA_SELECT_OFDM *p_ofdm_tx;	/* OFDM Tx register */
	R_ANTENNA_SELECT_CCK *p_cck_txrx;

	u8	r_rx_antenna_ofdm = 0, r_ant_select_cck_val = 0;
	u8	chgTx = 0, chgRx = 0;
	u32	r_ant_sel_cck_val = 0, r_ant_select_ofdm_val = 0, r_ofdm_tx_en_val = 0;


	p_ofdm_tx = (R_ANTENNA_SELECT_OFDM *)&r_ant_select_ofdm_val;
	p_cck_txrx = (R_ANTENNA_SELECT_CCK *)&r_ant_select_cck_val;

	p_ofdm_tx->r_ant_ht1	= 0x1;
	p_ofdm_tx->r_ant_ht2	= 0x2;	// Second TX RF path is A
	p_ofdm_tx->r_ant_non_ht = 0x3;	// 0x1+0x2=0x3

	switch (pAdapter->mppriv.antenna_tx)
	{
		case ANTENNA_A:
			p_ofdm_tx->r_tx_antenna		= 0x1;
			r_ofdm_tx_en_val		= 0x1;
			p_ofdm_tx->r_ant_l 		= 0x1;
			p_ofdm_tx->r_ant_ht_s1 		= 0x1;
			p_ofdm_tx->r_ant_non_ht_s1 	= 0x1;
			p_cck_txrx->r_ccktx_enable	= 0x8;
			chgTx = 1;

			// From SD3 Willis suggestion !!! Set RF A=TX and B as standby
//			if (IS_HARDWARE_TYPE_8192S(pAdapter))
			{
			write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2);
			write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 1);
			r_ofdm_tx_en_val		= 0x3;

			// Power save
			//cosa r_ant_select_ofdm_val = 0x11111111;

			// We need to close RFB by SW control
			if (pHalData->rf_type == RF_2T2R)
			{
				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 1);
				PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);
				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 0);
			}
			}
			break;

		case ANTENNA_B:
			p_ofdm_tx->r_tx_antenna		= 0x2;
			r_ofdm_tx_en_val		= 0x2;
			p_ofdm_tx->r_ant_l 		= 0x2;
			p_ofdm_tx->r_ant_ht_s1 		= 0x2;
			p_ofdm_tx->r_ant_non_ht_s1 	= 0x2;
			p_cck_txrx->r_ccktx_enable	= 0x4;
			chgTx = 1;

			// From SD3 Willis suggestion !!! Set RF A as standby
			//if (IS_HARDWARE_TYPE_8192S(pAdapter))
			{
			PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 1);
			PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2);
//			r_ofdm_tx_en_val		= 0x3;

			// Power save
			//cosa r_ant_select_ofdm_val = 0x22222222;

			// 2008/10/31 MH From SD3 Willi's suggestion. We must read RF 1T table.
			// 2009/01/08 MH From Sd3 Willis. We need to close RFA by SW control
			if (pHalData->rf_type == RF_2T2R || pHalData->rf_type == RF_1T2R)
			{
				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 1);
				PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0);
				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
//				PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);
				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 0);
				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
			}
			}
		break;

		case ANTENNA_AB:	// For 8192S
			p_ofdm_tx->r_tx_antenna		= 0x3;
			r_ofdm_tx_en_val		= 0x3;
			p_ofdm_tx->r_ant_l 		= 0x3;
			p_ofdm_tx->r_ant_ht_s1 		= 0x3;
			p_ofdm_tx->r_ant_non_ht_s1 	= 0x3;
			p_cck_txrx->r_ccktx_enable	= 0xC;
			chgTx = 1;

			// From SD3 Willis suggestion !!! Set RF B as standby
			//if (IS_HARDWARE_TYPE_8192S(pAdapter))
			{
			PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2);
			PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2);

			// Disable Power save
			//cosa r_ant_select_ofdm_val = 0x3321333;
#if 0
			// 2008/10/31 MH From SD3 Willi's suggestion. We must read RFA 2T table.
			if ((pHalData->VersionID == VERSION_8192S_ACUT)) // For RTL8192SU A-Cut only, by Roger, 2008.11.07.
			{
				mpt_RFConfigFromPreParaArrary(pAdapter, 1, RF_PATH_A);
			}
#endif
			// 2009/01/08 MH From Sd3 Willis. We need to enable RFA/B by SW control
			if (pHalData->rf_type == RF_2T2R)
			{
				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
//				PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);
				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
			}
			}
			break;

		default:
			break;
	}

	//
	// r_rx_antenna_ofdm, bit0=A, bit1=B, bit2=C, bit3=D
	// r_cckrx_enable : CCK default, 0=A, 1=B, 2=C, 3=D
	// r_cckrx_enable_2 : CCK option, 0=A, 1=B, 2=C, 3=D
	//
	switch (pAdapter->mppriv.antenna_rx)
	{
		case ANTENNA_A:
			r_rx_antenna_ofdm 		= 0x1;	// A
			p_cck_txrx->r_cckrx_enable 	= 0x0;	// default: A
			p_cck_txrx->r_cckrx_enable_2	= 0x0;	// option: A
			chgRx = 1;
			break;

		case ANTENNA_B:
			r_rx_antenna_ofdm 		= 0x2;	// B
			p_cck_txrx->r_cckrx_enable 	= 0x1;	// default: B
			p_cck_txrx->r_cckrx_enable_2	= 0x1;	// option: B
			chgRx = 1;
			break;

		case ANTENNA_AB:
			r_rx_antenna_ofdm 		= 0x3;	// AB
			p_cck_txrx->r_cckrx_enable 	= 0x0;	// default:A
			p_cck_txrx->r_cckrx_enable_2	= 0x1;	// option:B
			chgRx = 1;
			break;

		default:
			break;
	}

	if (chgTx && chgRx)
	{
		switch(pHalData->rf_chip)
		{
			case RF_8225:
			case RF_8256:
			case RF_6052:
				//r_ant_sel_cck_val = r_ant_select_cck_val;
				PHY_SetBBReg(pAdapter, rFPGA1_TxInfo, 0x7fffffff, r_ant_select_ofdm_val);	//OFDM Tx
				PHY_SetBBReg(pAdapter, rFPGA0_TxInfo, 0x0000000f, r_ofdm_tx_en_val);		//OFDM Tx
				PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, 0x000000ff, ((r_rx_antenna_ofdm<<4)|r_rx_antenna_ofdm));	//OFDM Rx
				PHY_SetBBReg(pAdapter, rOFDM1_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm);	//OFDM Rx
				PHY_SetBBReg(pAdapter, rCCK0_AFESetting, bMaskByte3, r_ant_select_cck_val);//r_ant_sel_cck_val);		//CCK TxRx

				break;

			default:
				break;
		}
	}

	RT_TRACE(_module_mp_, _drv_notice_, ("-SwitchAntenna: finished\n"));
}

s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther)
{
	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);


	if (!netif_running(pAdapter->pnetdev)) {
		RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter! Fail: interface not opened!\n"));
		return _FAIL;
	}

	if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == _FALSE) {
		RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter: Fail! not in MP mode!\n"));
		return _FAIL;
	}

	target_ther &= 0xff;
	if (target_ther < 0x07)
		target_ther = 0x07;
	else if (target_ther > 0x1d)
		target_ther = 0x1d;

	pHalData->EEPROMThermalMeter = target_ther;

	return _SUCCESS;
}

void Hal_TriggerRFThermalMeter(PADAPTER pAdapter)
{
  
	PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_T_METER_8192E, BIT17 | BIT16, 0x03);
//	RT_TRACE(_module_mp_,_drv_alert_, ("TriggerRFThermalMeter() finished.\n" ));
}

u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter)
{
	u32 ThermalValue = 0;

	//ThermalValue = _read_rfreg(pAdapter, RF_PATH_A, RF_T_METER, 0x1F);	// 0x24: RF Reg[4:0]
	ThermalValue = (u1Byte)PHY_QueryRFReg(pAdapter, ODM_RF_PATH_A, RF_T_METER_8192E, 0xfc00);	// 0x42: RF Reg[15:10]
	DBG_871X("%s ThermalValue = 0x%x\n", __FUNCTION__,ThermalValue);
//	RT_TRACE(_module_mp_, _drv_alert_, ("ThermalValue = 0x%x\n", ThermalValue));
	return (u8)ThermalValue;
}

void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value)
{
#if 0
	fw_cmd(pAdapter, IOCMD_GET_THERMAL_METER);
	rtw_msleep_os(1000);
	fw_cmd_data(pAdapter, value, 1);
	*value &= 0xFF;
#else

	Hal_TriggerRFThermalMeter(pAdapter);
	rtw_msleep_os(1000);
	*value = Hal_ReadRFThermalMeter(pAdapter);
#endif
}

void Hal_SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart)
{
    HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
	pAdapter->mppriv.MptCtx.bSingleCarrier = bStart;
	if (bStart)// Start Single Carrier.
	{
		RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleCarrierTx: test start\n"));
		// 1. if OFDM block on?
		if(!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
			write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);//set OFDM block on

		{
		// 2. set CCK test mode off, set to CCK normal mode
		write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable);
		// 3. turn on scramble setting
		write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable);
         }
		// 4. Turn On Single Carrier Tx and turn off the other test modes.
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bEnable);
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
#ifdef CONFIG_RTL8192C
		// 5. Disable TX power saving at STF & LLTF
		write_bbreg(pAdapter, rOFDM1_LSTF, BIT22, 1);
#endif
		//for dynamic set Power index.
		write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
		write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
		
	}
	else// Stop Single Carrier.
	{
		RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleCarrierTx: test stop\n"));

		// Turn off all test modes.
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
#ifdef CONFIG_RTL8192C
		// Cancel disable TX power saving at STF&LLTF
		write_bbreg(pAdapter, rOFDM1_LSTF, BIT22, 0);
#endif
		//Delay 10 ms //delay_ms(10);
		rtw_msleep_os(10);

		//BB Reset
		write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
		write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);

		//Stop for dynamic set Power index.
		write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
		write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
		
	}
}


void Hal_SetSingleToneTx(PADAPTER pAdapter, u8 bStart)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
	PMPT_CONTEXT	pMptCtx = &(pAdapter->mppriv.MptCtx);	

	switch (pAdapter->mppriv.antenna_tx)
	{
		case ANTENNA_A:
		default:
			pMptCtx->MptRfPath = RF_PATH_A;
			break;
		case ANTENNA_B:
			pMptCtx->MptRfPath = RF_PATH_B;
			break;	
	}
	
	pAdapter->mppriv.MptCtx.bSingleTone = bStart;
	if (bStart)// Start Single Tone.
	{
		//Set MAC REG 88C: Prevent SingleTone Fail
		//rtw_write32(pAdapter,0x88C,0xCCF000C0);
		PHY_SetMacReg(pAdapter, 0x88C, 0xF00000, 0xF);
		PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, LNA_Low_Gain_3, BIT1, 0x1); // RF LO disabled
		PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, RF_AC, 0xF0000, 0x2); // Tx mode		
		
	}
	else// Stop Single Tone.
	{
		PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, RF_AC, 0xF0000, 0x3); // Tx mode
		PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, LNA_Low_Gain_3, BIT1, 0x0); // RF LO disabled    	
		//rtw_write32(pAdapter,0x88C,0xCC0000C0);
		PHY_SetMacReg(pAdapter, 0x88C, 0xF00000, 0x0);	
	}
	
}



void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart)
{
	pAdapter->mppriv.MptCtx.bCarrierSuppression = bStart;
	if (bStart) // Start Carrier Suppression.
	{
		RT_TRACE(_module_mp_,_drv_alert_, ("SetCarrierSuppressionTx: test start\n"));
		//if(pMgntInfo->dot11CurrentWirelessMode == WIRELESS_MODE_B)
		if (pAdapter->mppriv.rateidx <= MPT_RATE_11M)
		  {
			// 1. if CCK block on?
			if(!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
				write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);//set CCK block on

			//Turn Off All Test Mode
			write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
			write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
			write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);

			write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2);    //transmit mode
			write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x0);  //turn off scramble setting

			//Set CCK Tx Test Rate
			//PHY_SetBBReg(pAdapter, rCCK0_System, bCCKTxRate, pMgntInfo->ForcedDataRate);
			write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, 0x0);    //Set FTxRate to 1Mbps
		}

		//for dynamic set Power index.
		write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
		write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
		
	}
	else// Stop Carrier Suppression.
	{
		RT_TRACE(_module_mp_,_drv_alert_, ("SetCarrierSuppressionTx: test stop\n"));
		//if(pMgntInfo->dot11CurrentWirelessMode == WIRELESS_MODE_B)
		if (pAdapter->mppriv.rateidx <= MPT_RATE_11M ) {
			write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0);    //normal mode
			write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x1);  //turn on scramble setting

			//BB Reset
			write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
			write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
		}

		//Stop for dynamic set Power index.
		write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
		write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
		
	}
	//DbgPrint("\n MPT_ProSetCarrierSupp() is finished. \n");
}

void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart)
{
	u32 cckrate;

	if (bStart)
	{
		RT_TRACE(_module_mp_, _drv_alert_,
			 ("SetCCKContinuousTx: test start\n"));

		// 1. if CCK block on?
		if(!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
			write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);//set CCK block on

		//Turn Off All Test Mode
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
		//Set CCK Tx Test Rate
		#if 0
		switch(pAdapter->mppriv.rateidx)
		{
			case 2:
				cckrate = 0;
				break;
			case 4:
				cckrate = 1;
				break;
			case 11:
				cckrate = 2;
				break;
			case 22:
				cckrate = 3;
				break;
			default:
				cckrate = 0;
				break;
		}
		#else
		cckrate  = pAdapter->mppriv.rateidx;
		#endif
		write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, cckrate);
		write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2);	//transmit mode
		write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable);	//turn on scramble setting

#ifdef CONFIG_RTL8192C
		// Patch for CCK 11M waveform
		if (cckrate == MPT_RATE_1M)
			write_bbreg(pAdapter, 0xA71, BIT(6), bDisable);
		else
			write_bbreg(pAdapter, 0xA71, BIT(6), bEnable);
#endif
		//for dynamic set Power index.
		write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
		write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);

	}
	else {
		RT_TRACE(_module_mp_, _drv_info_,
			 ("SetCCKContinuousTx: test stop\n"));

		write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0);	//normal mode
		write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable);	//turn on scramble setting

		//BB Reset
		write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
		write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);

		//Stop for dynamic set Power index.
		write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
		write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
	}

	pAdapter->mppriv.MptCtx.bCckContTx = bStart;
	pAdapter->mppriv.MptCtx.bOfdmContTx = _FALSE;
}/* mpt_StartCckContTx */

void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart)
{
    HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);

	if (bStart) {
		RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test start\n"));
		// 1. if OFDM block on?
		if(!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
			write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);//set OFDM block on
        {

		// 2. set CCK test mode off, set to CCK normal mode
		write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable);

		// 3. turn on scramble setting
		write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable);
        }
		// 4. Turn On Continue Tx and turn off the other test modes.
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bEnable);
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);

		//for dynamic set Power index.
		write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
		write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
		
	} else {
		RT_TRACE(_module_mp_,_drv_info_, ("SetOFDMContinuousTx: test stop\n"));
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
		//Delay 10 ms
		rtw_msleep_os(10);
		//BB Reset
		write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
		write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);

		//Stop for dynamic set Power index.
		write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
		write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
	}

	pAdapter->mppriv.MptCtx.bCckContTx = _FALSE;
	pAdapter->mppriv.MptCtx.bOfdmContTx = bStart;
}/* mpt_StartOfdmContTx */

void Hal_SetContinuousTx(PADAPTER pAdapter, u8 bStart)
{
#if 0
	// ADC turn off [bit24-21] adc port0 ~ port1
	if (bStart) {
		write_bbreg(pAdapter, rRx_Wait_CCCA, read_bbreg(pAdapter, rRx_Wait_CCCA) & 0xFE1FFFFF);
		rtw_usleep_os(100);
	}
#endif
	RT_TRACE(_module_mp_, _drv_info_,
		 ("SetContinuousTx: rate:%d\n", pAdapter->mppriv.rateidx));

	pAdapter->mppriv.MptCtx.bStartContTx = bStart;
	if (pAdapter->mppriv.rateidx <= MPT_RATE_11M)
	{
		Hal_SetCCKContinuousTx(pAdapter, bStart);
	}
	else if ((pAdapter->mppriv.rateidx >= MPT_RATE_6M) &&
		 (pAdapter->mppriv.rateidx <= MPT_RATE_MCS15))
	{
		Hal_SetOFDMContinuousTx(pAdapter, bStart);
	}
#if 0
	// ADC turn on [bit24-21] adc port0 ~ port1
	if (!bStart) {
		write_bbreg(pAdapter, rRx_Wait_CCCA, read_bbreg(pAdapter, rRx_Wait_CCCA) | 0x01E00000);
	}
#endif
}

#endif // CONFIG_MP_INCLUDE