/****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * ******************************************************************************/ #ifndef __HALDMOUTSRC_H__ #define __HALDMOUTSRC_H__ //============================================================ // include files //============================================================ #include "odm_DIG.h" #include "odm_EdcaTurboCheck.h" #include "odm_PathDiv.h" #include "odm_DynamicBBPowerSaving.h" #include "odm_RaInfo.h" #include "odm_DynamicTxPower.h" #include "odm_CfoTracking.h" #include "odm_ACS.h" #include "odm_NoiseMonitor.h" #include "odm_PowerTracking.h" #include "PhyDM_Adaptivity.h" //============================================================ // Definition //============================================================ // // 2011/09/22 MH Define all team supprt ability. // // // 2011/09/22 MH Define for all teams. Please Define the constan in your precomp header. // //#define DM_ODM_SUPPORT_AP 0 //#define DM_ODM_SUPPORT_ADSL 0 //#define DM_ODM_SUPPORT_CE 0 //#define DM_ODM_SUPPORT_MP 1 // // 2011/09/28 MH Define ODM SW team support flag. // // // Antenna Switch Relative Definition. // // // 20100503 Joseph: // Add new function SwAntDivCheck8192C(). // This is the main function of Antenna diversity function before link. // Mainly, it just retains last scan result and scan again. // After that, it compares the scan result to see which one gets better RSSI. // It selects antenna with better receiving power and returns better scan result. // #define TP_MODE 0 #define RSSI_MODE 1 #define TRAFFIC_LOW 0 #define TRAFFIC_HIGH 1 #define NONE 0 //============================================================ //3 Tx Power Tracking //3============================================================ //============================================================ //3 PSD Handler //3============================================================ #define AFH_PSD 1 //0:normal PSD scan, 1: only do 20 pts PSD #define MODE_40M 0 //0:20M, 1:40M #define PSD_TH2 3 #define PSD_CHMIN 20 // Minimum channel number for BT AFH #define SIR_STEP_SIZE 3 #define Smooth_Size_1 5 #define Smooth_TH_1 3 #define Smooth_Size_2 10 #define Smooth_TH_2 4 #define Smooth_Size_3 20 #define Smooth_TH_3 4 #define Smooth_Step_Size 5 #define Adaptive_SIR 1 #if(RTL8723_FPGA_VERIFICATION == 1) #define PSD_RESCAN 1 #else #define PSD_RESCAN 4 #endif #define PSD_SCAN_INTERVAL 700 //ms //8723A High Power IGI Setting #define DM_DIG_HIGH_PWR_IGI_LOWER_BOUND 0x22 #define DM_DIG_Gmode_HIGH_PWR_IGI_LOWER_BOUND 0x28 #define DM_DIG_HIGH_PWR_THRESHOLD 0x3a #define DM_DIG_LOW_PWR_THRESHOLD 0x14 //ANT Test #define ANTTESTALL 0x00 //Ant A or B will be Testing #define ANTTESTA 0x01 //Ant A will be Testing #define ANTTESTB 0x02 //Ant B will be testing //for 8723A Ant Definition--2012--06--07 due to different IC may be different ANT define #define MAIN_ANT 1 //Ant A or Ant Main #define AUX_ANT 2 //AntB or Ant Aux #define MAX_ANT 3 // 3 for AP using //Antenna Diversity Type #define SW_ANTDIV 0 #define HW_ANTDIV 1 //============================================================ // structure and define //============================================================ // // 2011/09/20 MH Add for AP/ADSLpseudo DM structuer requirement. // We need to remove to other position??? // #if(DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_WIN)) typedef struct rtl8192cd_priv { u1Byte temp; }rtl8192cd_priv, *prtl8192cd_priv; #endif #if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL)) typedef struct _ADAPTER{ u1Byte temp; #ifdef AP_BUILD_WORKAROUND HAL_DATA_TYPE* temp2; prtl8192cd_priv priv; #endif }ADAPTER, *PADAPTER; #endif #if (DM_ODM_SUPPORT_TYPE == ODM_AP) typedef struct _WLAN_STA{ u1Byte temp; } WLAN_STA, *PRT_WLAN_STA; #endif //Remove DIG by Yuchen //Remoce BB power saving by Yuchn //Remove DIG by yuchen typedef struct _Dynamic_Primary_CCA{ u1Byte PriCCA_flag; u1Byte intf_flag; u1Byte intf_type; u1Byte DupRTS_flag; u1Byte Monitor_flag; u1Byte CH_offset; u1Byte MF_state; }Pri_CCA_T, *pPri_CCA_T; //Remove RA_T,*pRA_T by RS_James typedef struct _RX_High_Power_ { u1Byte RXHP_flag; u1Byte PSD_func_trigger; u1Byte PSD_bitmap_RXHP[80]; u1Byte Pre_IGI; u1Byte Cur_IGI; u1Byte Pre_pw_th; u1Byte Cur_pw_th; BOOLEAN First_time_enter; BOOLEAN RXHP_enable; u1Byte TP_Mode; RT_TIMER PSDTimer; #if (DM_ODM_SUPPORT_TYPE == ODM_WIN) #if USE_WORKITEM RT_WORK_ITEM PSDTimeWorkitem; #endif #endif }RXHP_T, *pRXHP_T; #if(DM_ODM_SUPPORT_TYPE & (ODM_CE)) #define ASSOCIATE_ENTRY_NUM 32 // Max size of AsocEntry[]. #define ODM_ASSOCIATE_ENTRY_NUM ASSOCIATE_ENTRY_NUM #elif(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL)) #define ASSOCIATE_ENTRY_NUM NUM_STAT #define ODM_ASSOCIATE_ENTRY_NUM ASSOCIATE_ENTRY_NUM+1 #else // // 2012/01/12 MH Revise for compatiable with other SW team. // 0 is for STA 1-n is for AP clients. // #define ODM_ASSOCIATE_ENTRY_NUM ASSOCIATE_ENTRY_NUM+1// Default port only one #endif //#ifdef CONFIG_ANTENNA_DIVERSITY // This indicates two different the steps. // In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air. // In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK // with original RSSI to determine if it is necessary to switch antenna. #define SWAW_STEP_PEAK 0 #define SWAW_STEP_DETERMINE 1 #define TP_MODE 0 #define RSSI_MODE 1 #define TRAFFIC_LOW 0 #define TRAFFIC_HIGH 1 #define TRAFFIC_UltraLOW 2 typedef struct _SW_Antenna_Switch_ { u1Byte Double_chk_flag; u1Byte try_flag; s4Byte PreRSSI; u1Byte CurAntenna; u1Byte PreAntenna; u1Byte RSSI_Trying; u1Byte TestMode; u1Byte bTriggerAntennaSwitch; u1Byte SelectAntennaMap; u1Byte RSSI_target; u1Byte reset_idx; u2Byte Single_Ant_Counter; u2Byte Dual_Ant_Counter; u2Byte Aux_FailDetec_Counter; u2Byte Retry_Counter; // Before link Antenna Switch check u1Byte SWAS_NoLink_State; u4Byte SWAS_NoLink_BK_Reg860; u4Byte SWAS_NoLink_BK_Reg92c; u4Byte SWAS_NoLink_BK_Reg948; BOOLEAN ANTA_ON; //To indicate Ant A is or not BOOLEAN ANTB_ON; //To indicate Ant B is on or not BOOLEAN Pre_Aux_FailDetec; BOOLEAN RSSI_AntDect_bResult; u1Byte Ant5G; u1Byte Ant2G; s4Byte RSSI_sum_A; s4Byte RSSI_sum_B; s4Byte RSSI_cnt_A; s4Byte RSSI_cnt_B; u8Byte lastTxOkCnt; u8Byte lastRxOkCnt; u8Byte TXByteCnt_A; u8Byte TXByteCnt_B; u8Byte RXByteCnt_A; u8Byte RXByteCnt_B; u1Byte TrafficLoad; u1Byte Train_time; u1Byte Train_time_flag; RT_TIMER SwAntennaSwitchTimer; #if (RTL8723B_SUPPORT == 1)||(RTL8821A_SUPPORT == 1) RT_TIMER SwAntennaSwitchTimer_8723B; u4Byte PktCnt_SWAntDivByCtrlFrame; BOOLEAN bSWAntDivByCtrlFrame; #endif #if (DM_ODM_SUPPORT_TYPE == ODM_WIN) #if USE_WORKITEM RT_WORK_ITEM SwAntennaSwitchWorkitem; #if (RTL8723B_SUPPORT == 1)||(RTL8821A_SUPPORT == 1) RT_WORK_ITEM SwAntennaSwitchWorkitem_8723B; #endif #endif #endif /* CE Platform use #ifdef CONFIG_SW_ANTENNA_DIVERSITY _timer SwAntennaSwitchTimer; u8Byte lastTxOkCnt; u8Byte lastRxOkCnt; u8Byte TXByteCnt_A; u8Byte TXByteCnt_B; u8Byte RXByteCnt_A; u8Byte RXByteCnt_B; u1Byte DoubleComfirm; u1Byte TrafficLoad; //SW Antenna Switch #endif */ #ifdef CONFIG_HW_ANTENNA_DIVERSITY //Hybrid Antenna Diversity u4Byte CCK_Ant1_Cnt[ASSOCIATE_ENTRY_NUM+1]; u4Byte CCK_Ant2_Cnt[ASSOCIATE_ENTRY_NUM+1]; u4Byte OFDM_Ant1_Cnt[ASSOCIATE_ENTRY_NUM+1]; u4Byte OFDM_Ant2_Cnt[ASSOCIATE_ENTRY_NUM+1]; u4Byte RSSI_Ant1_Sum[ASSOCIATE_ENTRY_NUM+1]; u4Byte RSSI_Ant2_Sum[ASSOCIATE_ENTRY_NUM+1]; u1Byte TxAnt[ASSOCIATE_ENTRY_NUM+1]; u1Byte TargetSTA; u1Byte antsel; u1Byte RxIdleAnt; #endif }SWAT_T, *pSWAT_T; //#endif // Edca Remove by YuChen //ODM_RATE_ADAPTIVE Remove by RS_James #if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL)) #ifdef ADSL_AP_BUILD_WORKAROUND #define MAX_TOLERANCE 5 #define IQK_DELAY_TIME 1 //ms #endif // // Indicate different AP vendor for IOT issue. // typedef enum _HT_IOT_PEER { HT_IOT_PEER_UNKNOWN = 0, HT_IOT_PEER_REALTEK = 1, HT_IOT_PEER_REALTEK_92SE = 2, HT_IOT_PEER_BROADCOM = 3, HT_IOT_PEER_RALINK = 4, HT_IOT_PEER_ATHEROS = 5, HT_IOT_PEER_CISCO = 6, HT_IOT_PEER_MERU = 7, HT_IOT_PEER_MARVELL = 8, HT_IOT_PEER_REALTEK_SOFTAP = 9,// peer is RealTek SOFT_AP, by Bohn, 2009.12.17 HT_IOT_PEER_SELF_SOFTAP = 10, // Self is SoftAP HT_IOT_PEER_AIRGO = 11, HT_IOT_PEER_INTEL = 12, HT_IOT_PEER_RTK_APCLIENT = 13, HT_IOT_PEER_REALTEK_81XX = 14, HT_IOT_PEER_REALTEK_WOW = 15, HT_IOT_PEER_MAX = 16 }HT_IOT_PEER_E, *PHTIOT_PEER_E; #endif//#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL)) #define DM_Type_ByFW 0 #define DM_Type_ByDriver 1 // // Declare for common info // #define MAX_PATH_NUM_92CS 2 #define MAX_PATH_NUM_8188E 1 #define MAX_PATH_NUM_8192E 2 #define MAX_PATH_NUM_8723B 1 #define MAX_PATH_NUM_8812A 2 #define MAX_PATH_NUM_8821A 1 #define MAX_PATH_NUM_8814A 4 #define MAX_PATH_NUM_8822B 2 #define IQK_THRESHOLD 8 #define DPK_THRESHOLD 4 typedef struct _ODM_Phy_Status_Info_ { // // Be care, if you want to add any element please insert between // RxPWDBAll & SignalStrength. // #if (DM_ODM_SUPPORT_TYPE & (ODM_WIN)) u4Byte RxPWDBAll; #else u1Byte RxPWDBAll; #endif u1Byte SignalQuality; // in 0-100 index. s1Byte RxMIMOSignalQuality[4]; //per-path's EVM u1Byte RxMIMOEVMdbm[4]; //per-path's EVM dbm u1Byte RxMIMOSignalStrength[4];// in 0~100 index u2Byte Cfo_short[4]; // per-path's Cfo_short u2Byte Cfo_tail[4]; // per-path's Cfo_tail #if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE)) s1Byte RxPower; // in dBm Translate from PWdB s1Byte RecvSignalPower; // Real power in dBm for this packet, no beautification and aggregation. Keep this raw info to be used for the other procedures. u1Byte BTRxRSSIPercentage; u1Byte SignalStrength; // in 0-100 index. s1Byte RxPwr[4]; //per-path's pwdb #endif u1Byte RxSNR[4]; //per-path's SNR u1Byte BandWidth; u1Byte btCoexPwrAdjust; }ODM_PHY_INFO_T,*PODM_PHY_INFO_T; typedef struct _ODM_Per_Pkt_Info_ { //u1Byte Rate; u1Byte DataRate; u1Byte StationID; BOOLEAN bPacketMatchBSSID; BOOLEAN bPacketToSelf; BOOLEAN bPacketBeacon; BOOLEAN bToSelf; }ODM_PACKET_INFO_T,*PODM_PACKET_INFO_T; typedef struct _ODM_Phy_Dbg_Info_ { //ODM Write,debug info s1Byte RxSNRdB[4]; u4Byte NumQryPhyStatus; u4Byte NumQryPhyStatusCCK; u4Byte NumQryPhyStatusOFDM; u1Byte NumQryBeaconPkt; //Others s4Byte RxEVM[4]; }ODM_PHY_DBG_INFO_T; typedef struct _ODM_Mac_Status_Info_ { u1Byte test; }ODM_MAC_INFO; typedef enum tag_Dynamic_ODM_Support_Ability_Type { // BB Team ODM_DIG = 0x00000001, ODM_HIGH_POWER = 0x00000002, ODM_CCK_CCA_TH = 0x00000004, ODM_FA_STATISTICS = 0x00000008, ODM_RAMASK = 0x00000010, ODM_RSSI_MONITOR = 0x00000020, ODM_SW_ANTDIV = 0x00000040, ODM_HW_ANTDIV = 0x00000080, ODM_BB_PWRSV = 0x00000100, ODM_2TPATHDIV = 0x00000200, ODM_1TPATHDIV = 0x00000400, ODM_PSD2AFH = 0x00000800 }ODM_Ability_E; // // 2011/20/20 MH For MP driver RT_WLAN_STA = STA_INFO_T // Please declare below ODM relative info in your STA info structure. // #if 1 typedef struct _ODM_STA_INFO{ // Driver Write BOOLEAN bUsed; // record the sta status link or not? //u1Byte WirelessMode; // u1Byte IOTPeer; // Enum value. HT_IOT_PEER_E // ODM Write //1 PHY_STATUS_INFO u1Byte RSSI_Path[4]; // u1Byte RSSI_Ave; u1Byte RXEVM[4]; u1Byte RXSNR[4]; // ODM Write //1 TX_INFO (may changed by IC) //TX_INFO_T pTxInfo; // Define in IC folder. Move lower layer. #if 0 u1Byte ANTSEL_A; //in Jagar: 4bit; others: 2bit u1Byte ANTSEL_B; //in Jagar: 4bit; others: 2bit u1Byte ANTSEL_C; //only in Jagar: 4bit u1Byte ANTSEL_D; //only in Jagar: 4bit u1Byte TX_ANTL; //not in Jagar: 2bit u1Byte TX_ANT_HT; //not in Jagar: 2bit u1Byte TX_ANT_CCK; //not in Jagar: 2bit u1Byte TXAGC_A; //not in Jagar: 4bit u1Byte TXAGC_B; //not in Jagar: 4bit u1Byte TXPWR_OFFSET; //only in Jagar: 3bit u1Byte TX_ANT; //only in Jagar: 4bit for TX_ANTL/TX_ANTHT/TX_ANT_CCK #endif // // Please use compile flag to disabe the strcutrue for other IC except 88E. // Move To lower layer. // // ODM Write Wilson will handle this part(said by Luke.Lee) //TX_RPT_T pTxRpt; // Define in IC folder. Move lower layer. #if 0 //1 For 88E RA (don't redefine the naming) u1Byte rate_id; u1Byte rate_SGI; u1Byte rssi_sta_ra; u1Byte SGI_enable; u1Byte Decision_rate; u1Byte Pre_rate; u1Byte Active; // Driver write Wilson handle. //1 TX_RPT (don't redefine the naming) u2Byte RTY[4]; // ??? u2Byte TOTAL; // ??? u2Byte DROP; // ??? // // Please use compile flag to disabe the strcutrue for other IC except 88E. // #endif }ODM_STA_INFO_T, *PODM_STA_INFO_T; #endif // // 2011/10/20 MH Define Common info enum for all team. // typedef enum _ODM_Common_Info_Definition { //-------------REMOVED CASE-----------// //ODM_CMNINFO_CCK_HP, //ODM_CMNINFO_RFPATH_ENABLE, // Define as ODM write??? //ODM_CMNINFO_BT_COEXIST, // ODM_BT_COEXIST_E //ODM_CMNINFO_OP_MODE, // ODM_OPERATION_MODE_E //-------------REMOVED CASE-----------// // // Fixed value: // //-----------HOOK BEFORE REG INIT-----------// ODM_CMNINFO_PLATFORM = 0, ODM_CMNINFO_ABILITY, // ODM_ABILITY_E ODM_CMNINFO_INTERFACE, // ODM_INTERFACE_E ODM_CMNINFO_MP_TEST_CHIP, ODM_CMNINFO_IC_TYPE, // ODM_IC_TYPE_E ODM_CMNINFO_CUT_VER, // ODM_CUT_VERSION_E ODM_CMNINFO_FAB_VER, // ODM_FAB_E ODM_CMNINFO_RF_TYPE, // ODM_RF_PATH_E or ODM_RF_TYPE_E? ODM_CMNINFO_RFE_TYPE, ODM_CMNINFO_BOARD_TYPE, // ODM_BOARD_TYPE_E ODM_CMNINFO_PACKAGE_TYPE, ODM_CMNINFO_EXT_LNA, // TRUE ODM_CMNINFO_5G_EXT_LNA, ODM_CMNINFO_EXT_PA, ODM_CMNINFO_5G_EXT_PA, ODM_CMNINFO_GPA, ODM_CMNINFO_APA, ODM_CMNINFO_GLNA, ODM_CMNINFO_ALNA, ODM_CMNINFO_EXT_TRSW, ODM_CMNINFO_PATCH_ID, //CUSTOMER ID ODM_CMNINFO_BINHCT_TEST, ODM_CMNINFO_BWIFI_TEST, ODM_CMNINFO_SMART_CONCURRENT, ODM_CMNINFO_DOMAIN_CODE_2G, ODM_CMNINFO_DOMAIN_CODE_5G, ODM_CMNINFO_IQKFWOFFLOAD, //-----------HOOK BEFORE REG INIT-----------// // // Dynamic value: // //--------- POINTER REFERENCE-----------// ODM_CMNINFO_MAC_PHY_MODE, // ODM_MAC_PHY_MODE_E ODM_CMNINFO_TX_UNI, ODM_CMNINFO_RX_UNI, ODM_CMNINFO_WM_MODE, // ODM_WIRELESS_MODE_E ODM_CMNINFO_BAND, // ODM_BAND_TYPE_E ODM_CMNINFO_SEC_CHNL_OFFSET, // ODM_SEC_CHNL_OFFSET_E ODM_CMNINFO_SEC_MODE, // ODM_SECURITY_E ODM_CMNINFO_BW, // ODM_BW_E ODM_CMNINFO_CHNL, ODM_CMNINFO_FORCED_RATE, ODM_CMNINFO_DMSP_GET_VALUE, ODM_CMNINFO_BUDDY_ADAPTOR, ODM_CMNINFO_DMSP_IS_MASTER, ODM_CMNINFO_SCAN, ODM_CMNINFO_POWER_SAVING, ODM_CMNINFO_ONE_PATH_CCA, // ODM_CCA_PATH_E ODM_CMNINFO_DRV_STOP, ODM_CMNINFO_PNP_IN, ODM_CMNINFO_INIT_ON, ODM_CMNINFO_ANT_TEST, ODM_CMNINFO_NET_CLOSED, //ODM_CMNINFO_RTSTA_AID, // For win driver only? ODM_CMNINFO_FORCED_IGI_LB, ODM_CMNINFO_P2P_LINK, ODM_CMNINFO_FCS_MODE, ODM_CMNINFO_IS1ANTENNA, ODM_CMNINFO_RFDEFAULTPATH, //--------- POINTER REFERENCE-----------// //------------CALL BY VALUE-------------// ODM_CMNINFO_WIFI_DIRECT, ODM_CMNINFO_WIFI_DISPLAY, ODM_CMNINFO_LINK_IN_PROGRESS, ODM_CMNINFO_LINK, ODM_CMNINFO_STATION_STATE, ODM_CMNINFO_RSSI_MIN, ODM_CMNINFO_DBG_COMP, // u8Byte ODM_CMNINFO_DBG_LEVEL, // u4Byte ODM_CMNINFO_RA_THRESHOLD_HIGH, // u1Byte ODM_CMNINFO_RA_THRESHOLD_LOW, // u1Byte ODM_CMNINFO_RF_ANTENNA_TYPE, // u1Byte ODM_CMNINFO_BT_ENABLED, ODM_CMNINFO_BT_HS_CONNECT_PROCESS, ODM_CMNINFO_BT_HS_RSSI, ODM_CMNINFO_BT_OPERATION, ODM_CMNINFO_BT_LIMITED_DIG, //Need to Limited Dig or not ODM_CMNINFO_BT_DISABLE_EDCA, #if(DM_ODM_SUPPORT_TYPE & ODM_AP) // for repeater mode add by YuChen 2014.06. #ifdef UNIVERSAL_REPEATER ODM_CMNINFO_VXD_LINK, #endif #endif //------------CALL BY VALUE-------------// // // Dynamic ptr array hook itms. // ODM_CMNINFO_STA_STATUS, ODM_CMNINFO_PHY_STATUS, ODM_CMNINFO_MAC_STATUS, ODM_CMNINFO_MAX, }ODM_CMNINFO_E; // // 2011/10/20 MH Define ODM support ability. ODM_CMNINFO_ABILITY // typedef enum _ODM_Support_Ability_Definition { // // BB ODM section BIT 0-19 // ODM_BB_DIG = BIT0, ODM_BB_RA_MASK = BIT1, ODM_BB_DYNAMIC_TXPWR = BIT2, ODM_BB_FA_CNT = BIT3, ODM_BB_RSSI_MONITOR = BIT4, ODM_BB_CCK_PD = BIT5, ODM_BB_ANT_DIV = BIT6, ODM_BB_PWR_SAVE = BIT7, ODM_BB_PWR_TRAIN = BIT8, ODM_BB_RATE_ADAPTIVE = BIT9, ODM_BB_PATH_DIV = BIT10, ODM_BB_PSD = BIT11, ODM_BB_RXHP = BIT12, ODM_BB_ADAPTIVITY = BIT13, ODM_BB_CFO_TRACKING = BIT14, ODM_BB_NHM_CNT = BIT15, ODM_BB_PRIMARY_CCA = BIT16, // // MAC DM section BIT 20-23 // ODM_MAC_EDCA_TURBO = BIT20, ODM_MAC_EARLY_MODE = BIT21, // // RF ODM section BIT 24-31 // ODM_RF_TX_PWR_TRACK = BIT24, ODM_RF_RX_GAIN_TRACK = BIT25, ODM_RF_CALIBRATION = BIT26, }ODM_ABILITY_E; // ODM_CMNINFO_INTERFACE typedef enum tag_ODM_Support_Interface_Definition { ODM_ITRF_PCIE = 0x1, ODM_ITRF_USB = 0x2, ODM_ITRF_SDIO = 0x4, ODM_ITRF_ALL = 0x7, }ODM_INTERFACE_E; // ODM_CMNINFO_IC_TYPE typedef enum tag_ODM_Support_IC_Type_Definition { ODM_RTL8192S = BIT0, ODM_RTL8192C = BIT1, ODM_RTL8192D = BIT2, ODM_RTL8723A = BIT3, ODM_RTL8188E = BIT4, ODM_RTL8812 = BIT5, ODM_RTL8821 = BIT6, ODM_RTL8192E = BIT7, ODM_RTL8723B = BIT8, ODM_RTL8814A = BIT9, ODM_RTL8881A = BIT10, ODM_RTL8821B = BIT11, ODM_RTL8822B = BIT12, ODM_RTL8703B = BIT13 }ODM_IC_TYPE_E; #define ODM_IC_11N_SERIES (ODM_RTL8192S|ODM_RTL8192C|ODM_RTL8192D|ODM_RTL8723A|ODM_RTL8188E|ODM_RTL8192E|ODM_RTL8723B|ODM_RTL8703B) #define ODM_IC_11AC_SERIES (ODM_RTL8812|ODM_RTL8821|ODM_RTL8814A|ODM_RTL8881A|ODM_RTL8821B|ODM_RTL8822B) #if (DM_ODM_SUPPORT_TYPE == ODM_AP) #ifdef RTK_AC_SUPPORT #define ODM_IC_11AC_SERIES_SUPPORT 1 #else #define ODM_IC_11AC_SERIES_SUPPORT 0 #endif #else #define ODM_IC_11AC_SERIES_SUPPORT 1 #endif //ODM_CMNINFO_CUT_VER typedef enum tag_ODM_Cut_Version_Definition { ODM_CUT_A = 0, ODM_CUT_B = 1, ODM_CUT_C = 2, ODM_CUT_D = 3, ODM_CUT_E = 4, ODM_CUT_F = 5, ODM_CUT_I = 8, ODM_CUT_J = 9, ODM_CUT_K = 10, ODM_CUT_TEST = 15, }ODM_CUT_VERSION_E; // ODM_CMNINFO_FAB_VER typedef enum tag_ODM_Fab_Version_Definition { ODM_TSMC = 0, ODM_UMC = 1, }ODM_FAB_E; // ODM_CMNINFO_RF_TYPE // // For example 1T2R (A+AB = BIT0|BIT4|BIT5) // typedef enum tag_ODM_RF_Path_Bit_Definition { ODM_RF_TX_A = BIT0, ODM_RF_TX_B = BIT1, ODM_RF_TX_C = BIT2, ODM_RF_TX_D = BIT3, ODM_RF_RX_A = BIT4, ODM_RF_RX_B = BIT5, ODM_RF_RX_C = BIT6, ODM_RF_RX_D = BIT7, }ODM_RF_PATH_E; typedef enum tag_ODM_RF_Type_Definition { ODM_1T1R = 0, ODM_1T2R = 1, ODM_2T2R = 2, ODM_2T3R = 3, ODM_2T4R = 4, ODM_3T3R = 5, ODM_3T4R = 6, ODM_4T4R = 7, }ODM_RF_TYPE_E; // // ODM Dynamic common info value definition // //typedef enum _MACPHY_MODE_8192D{ // SINGLEMAC_SINGLEPHY, // DUALMAC_DUALPHY, // DUALMAC_SINGLEPHY, //}MACPHY_MODE_8192D,*PMACPHY_MODE_8192D; // Above is the original define in MP driver. Please use the same define. THX. typedef enum tag_ODM_MAC_PHY_Mode_Definition { ODM_SMSP = 0, ODM_DMSP = 1, ODM_DMDP = 2, }ODM_MAC_PHY_MODE_E; typedef enum tag_BT_Coexist_Definition { ODM_BT_BUSY = 1, ODM_BT_ON = 2, ODM_BT_OFF = 3, ODM_BT_NONE = 4, }ODM_BT_COEXIST_E; // ODM_CMNINFO_OP_MODE typedef enum tag_Operation_Mode_Definition { ODM_NO_LINK = BIT0, ODM_LINK = BIT1, ODM_SCAN = BIT2, ODM_POWERSAVE = BIT3, ODM_AP_MODE = BIT4, ODM_CLIENT_MODE = BIT5, ODM_AD_HOC = BIT6, ODM_WIFI_DIRECT = BIT7, ODM_WIFI_DISPLAY = BIT8, }ODM_OPERATION_MODE_E; // ODM_CMNINFO_WM_MODE #if (DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_CE)) typedef enum tag_Wireless_Mode_Definition { ODM_WM_UNKNOW = 0x0, ODM_WM_B = BIT0, ODM_WM_G = BIT1, ODM_WM_A = BIT2, ODM_WM_N24G = BIT3, ODM_WM_N5G = BIT4, ODM_WM_AUTO = BIT5, ODM_WM_AC = BIT6, }ODM_WIRELESS_MODE_E; #else typedef enum tag_Wireless_Mode_Definition { ODM_WM_UNKNOWN = 0x00, ODM_WM_A = BIT0, ODM_WM_B = BIT1, ODM_WM_G = BIT2, ODM_WM_AUTO = BIT3, ODM_WM_N24G = BIT4, ODM_WM_N5G = BIT5, ODM_WM_AC_5G = BIT6, ODM_WM_AC_24G = BIT7, ODM_WM_AC_ONLY = BIT8, ODM_WM_MAX = BIT9 }ODM_WIRELESS_MODE_E; #endif // ODM_CMNINFO_BAND typedef enum tag_Band_Type_Definition { ODM_BAND_2_4G = 0, ODM_BAND_5G, ODM_BAND_ON_BOTH, ODM_BANDMAX }ODM_BAND_TYPE_E; // ODM_CMNINFO_SEC_CHNL_OFFSET typedef enum tag_Secondary_Channel_Offset_Definition { ODM_DONT_CARE = 0, ODM_BELOW = 1, ODM_ABOVE = 2 }ODM_SEC_CHNL_OFFSET_E; // ODM_CMNINFO_SEC_MODE typedef enum tag_Security_Definition { ODM_SEC_OPEN = 0, ODM_SEC_WEP40 = 1, ODM_SEC_TKIP = 2, ODM_SEC_RESERVE = 3, ODM_SEC_AESCCMP = 4, ODM_SEC_WEP104 = 5, ODM_WEP_WPA_MIXED = 6, // WEP + WPA ODM_SEC_SMS4 = 7, }ODM_SECURITY_E; // ODM_CMNINFO_BW typedef enum tag_Bandwidth_Definition { ODM_BW20M = 0, ODM_BW40M = 1, ODM_BW80M = 2, ODM_BW160M = 3, ODM_BW10M = 4, }ODM_BW_E; // ODM_CMNINFO_BOARD_TYPE // For non-AC-series IC , ODM_BOARD_5G_EXT_PA and ODM_BOARD_5G_EXT_LNA are ignored // For AC-series IC, external PA & LNA can be indivisuallly added on 2.4G and/or 5G typedef enum tag_Board_Definition { ODM_BOARD_DEFAULT = 0, // The DEFAULT case. ODM_BOARD_MINICARD = BIT(0), // 0 = non-mini card, 1= mini card. ODM_BOARD_SLIM = BIT(1), // 0 = non-slim card, 1 = slim card ODM_BOARD_BT = BIT(2), // 0 = without BT card, 1 = with BT ODM_BOARD_EXT_PA = BIT(3), // 0 = no 2G ext-PA, 1 = existing 2G ext-PA ODM_BOARD_EXT_LNA = BIT(4), // 0 = no 2G ext-LNA, 1 = existing 2G ext-LNA ODM_BOARD_EXT_TRSW = BIT(5), // 0 = no ext-TRSW, 1 = existing ext-TRSW ODM_BOARD_EXT_PA_5G = BIT(6), // 0 = no 5G ext-PA, 1 = existing 5G ext-PA ODM_BOARD_EXT_LNA_5G= BIT(7), // 0 = no 5G ext-LNA, 1 = existing 5G ext-LNA }ODM_BOARD_TYPE_E; typedef enum tag_ODM_Package_Definition { ODM_PACKAGE_DEFAULT = 0, ODM_PACKAGE_QFN68 = BIT(0), ODM_PACKAGE_TFBGA90 = BIT(1), ODM_PACKAGE_TFBGA79 = BIT(2), }ODM_Package_TYPE_E; typedef enum tag_ODM_TYPE_GPA_Definition { TYPE_GPA0 = 0, TYPE_GPA1 = BIT(1)|BIT(0) }ODM_TYPE_GPA_E; typedef enum tag_ODM_TYPE_APA_Definition { TYPE_APA0 = 0, TYPE_APA1 = BIT(1)|BIT(0) }ODM_TYPE_APA_E; typedef enum tag_ODM_TYPE_GLNA_Definition { TYPE_GLNA0 = 0, TYPE_GLNA1 = BIT(2)|BIT(0), TYPE_GLNA2 = BIT(3)|BIT(1), TYPE_GLNA3 = BIT(3)|BIT(2)|BIT(1)|BIT(0) }ODM_TYPE_GLNA_E; typedef enum tag_ODM_TYPE_ALNA_Definition { TYPE_ALNA0 = 0, TYPE_ALNA1 = BIT(2)|BIT(0), TYPE_ALNA2 = BIT(3)|BIT(1), TYPE_ALNA3 = BIT(3)|BIT(2)|BIT(1)|BIT(0) }ODM_TYPE_ALNA_E; // ODM_CMNINFO_ONE_PATH_CCA typedef enum tag_CCA_Path { ODM_CCA_2R = 0, ODM_CCA_1R_A = 1, ODM_CCA_1R_B = 2, }ODM_CCA_PATH_E; typedef struct _ODM_RA_Info_ { u1Byte RateID; u4Byte RateMask; u4Byte RAUseRate; u1Byte RateSGI; u1Byte RssiStaRA; u1Byte PreRssiStaRA; u1Byte SGIEnable; u1Byte DecisionRate; u1Byte PreRate; u1Byte HighestRate; u1Byte LowestRate; u4Byte NscUp; u4Byte NscDown; u2Byte RTY[5]; u4Byte TOTAL; u2Byte DROP; u1Byte Active; u2Byte RptTime; u1Byte RAWaitingCounter; u1Byte RAPendingCounter; #if 1 //POWER_TRAINING_ACTIVE == 1 // For compile pass only~! u1Byte PTActive; // on or off u1Byte PTTryState; // 0 trying state, 1 for decision state u1Byte PTStage; // 0~6 u1Byte PTStopCount; //Stop PT counter u1Byte PTPreRate; // if rate change do PT u1Byte PTPreRssi; // if RSSI change 5% do PT u1Byte PTModeSS; // decide whitch rate should do PT u1Byte RAstage; // StageRA, decide how many times RA will be done between PT u1Byte PTSmoothFactor; #endif } ODM_RA_INFO_T,*PODM_RA_INFO_T; //Remove struct PATHDIV_PARA to odm_PathDiv.h //move to PowerTracking.h by YuChen // // ODM Dynamic common info value definition // typedef struct _FAST_ANTENNA_TRAINNING_ { u1Byte Bssid[6]; u1Byte antsel_rx_keep_0; u1Byte antsel_rx_keep_1; u1Byte antsel_rx_keep_2; u1Byte antsel_rx_keep_3; u4Byte antSumRSSI[7]; u4Byte antRSSIcnt[7]; u4Byte antAveRSSI[7]; u1Byte FAT_State; u4Byte TrainIdx; u1Byte antsel_a[ODM_ASSOCIATE_ENTRY_NUM]; u1Byte antsel_b[ODM_ASSOCIATE_ENTRY_NUM]; u1Byte antsel_c[ODM_ASSOCIATE_ENTRY_NUM]; u4Byte MainAnt_Sum[ODM_ASSOCIATE_ENTRY_NUM]; u4Byte AuxAnt_Sum[ODM_ASSOCIATE_ENTRY_NUM]; u4Byte MainAnt_Cnt[ODM_ASSOCIATE_ENTRY_NUM]; u4Byte AuxAnt_Cnt[ODM_ASSOCIATE_ENTRY_NUM]; u1Byte RxIdleAnt; BOOLEAN bBecomeLinked; u4Byte MinMaxRSSI; u1Byte idx_AntDiv_counter_2G; u1Byte idx_AntDiv_counter_5G; u4Byte AntDiv_2G_5G; u4Byte CCK_counter_main; u4Byte CCK_counter_aux; u4Byte OFDM_counter_main; u4Byte OFDM_counter_aux; u4Byte CCK_CtrlFrame_Cnt_main; u4Byte CCK_CtrlFrame_Cnt_aux; u4Byte OFDM_CtrlFrame_Cnt_main; u4Byte OFDM_CtrlFrame_Cnt_aux; u4Byte MainAnt_CtrlFrame_Sum; u4Byte AuxAnt_CtrlFrame_Sum; u4Byte MainAnt_CtrlFrame_Cnt; u4Byte AuxAnt_CtrlFrame_Cnt; }FAT_T,*pFAT_T; typedef enum _FAT_STATE { FAT_NORMAL_STATE = 0, FAT_TRAINING_STATE = 1, }FAT_STATE_E, *PFAT_STATE_E; typedef enum _ANT_DIV_TYPE { NO_ANTDIV = 0xFF, CG_TRX_HW_ANTDIV = 0x01, CGCS_RX_HW_ANTDIV = 0x02, FIXED_HW_ANTDIV = 0x03, CG_TRX_SMART_ANTDIV = 0x04, CGCS_RX_SW_ANTDIV = 0x05, S0S1_SW_ANTDIV = 0x06 //8723B intrnal switch S0 S1 }ANT_DIV_TYPE_E, *PANT_DIV_TYPE_E; typedef struct _ODM_PATH_DIVERSITY_ { u1Byte RespTxPath; u1Byte PathSel[ODM_ASSOCIATE_ENTRY_NUM]; u4Byte PathA_Sum[ODM_ASSOCIATE_ENTRY_NUM]; u4Byte PathB_Sum[ODM_ASSOCIATE_ENTRY_NUM]; u4Byte PathA_Cnt[ODM_ASSOCIATE_ENTRY_NUM]; u4Byte PathB_Cnt[ODM_ASSOCIATE_ENTRY_NUM]; }PATHDIV_T, *pPATHDIV_T; typedef enum _BASEBAND_CONFIG_PHY_REG_PG_VALUE_TYPE{ PHY_REG_PG_RELATIVE_VALUE = 0, PHY_REG_PG_EXACT_VALUE = 1 } PHY_REG_PG_TYPE; // // Antenna detection information from single tone mechanism, added by Roger, 2012.11.27. // typedef struct _ANT_DETECTED_INFO{ BOOLEAN bAntDetected; u4Byte dBForAntA; u4Byte dBForAntB; u4Byte dBForAntO; }ANT_DETECTED_INFO, *PANT_DETECTED_INFO; // // 2011/09/22 MH Copy from SD4 defined structure. We use to support PHY DM integration. // #if(DM_ODM_SUPPORT_TYPE & ODM_WIN) #if (RT_PLATFORM != PLATFORM_LINUX) typedef #endif struct DM_Out_Source_Dynamic_Mechanism_Structure #else// for AP,ADSL,CE Team typedef struct DM_Out_Source_Dynamic_Mechanism_Structure #endif { //RT_TIMER FastAntTrainingTimer; // // Add for different team use temporarily // PADAPTER Adapter; // For CE/NIC team prtl8192cd_priv priv; // For AP/ADSL team // WHen you use Adapter or priv pointer, you must make sure the pointer is ready. BOOLEAN odm_ready; #if(DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_WIN)) rtl8192cd_priv fake_priv; #endif #if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL)) // ADSL_AP_BUILD_WORKAROUND ADAPTER fake_adapter; #endif PHY_REG_PG_TYPE PhyRegPgValueType; u1Byte PhyRegPgVersion; u8Byte DebugComponents; u4Byte DebugLevel; u4Byte NumQryPhyStatusAll; //CCK + OFDM u4Byte LastNumQryPhyStatusAll; u4Byte RxPWDBAve; BOOLEAN MPDIG_2G; //off MPDIG u1Byte Times_2G; //------ ODM HANDLE, DRIVER NEEDS NOT TO HOOK------// BOOLEAN bCckHighPower; u1Byte RFPathRxEnable; // ODM_CMNINFO_RFPATH_ENABLE u1Byte ControlChannel; //------ ODM HANDLE, DRIVER NEEDS NOT TO HOOK------// //--------REMOVED COMMON INFO----------// //u1Byte PseudoMacPhyMode; //BOOLEAN *BTCoexist; //BOOLEAN PseudoBtCoexist; //u1Byte OPMode; //BOOLEAN bAPMode; //BOOLEAN bClientMode; //BOOLEAN bAdHocMode; //BOOLEAN bSlaveOfDMSP; //--------REMOVED COMMON INFO----------// //1 COMMON INFORMATION // // Init Value // //-----------HOOK BEFORE REG INIT-----------// // ODM Platform info AP/ADSL/CE/MP = 1/2/3/4 u1Byte SupportPlatform; // ODM Support Ability DIG/RATR/TX_PWR_TRACK/ ¡K¡K = 1/2/3/¡K u4Byte SupportAbility; // ODM PCIE/USB/SDIO = 1/2/3 u1Byte SupportInterface; // ODM composite or independent. Bit oriented/ 92C+92D+ .... or any other type = 1/2/3/... u4Byte SupportICType; // Cut Version TestChip/A-cut/B-cut... = 0/1/2/3/... u1Byte CutVersion; // Fab Version TSMC/UMC = 0/1 u1Byte FabVersion; // RF Type 4T4R/3T3R/2T2R/1T2R/1T1R/... u1Byte RFType; u1Byte RFEType; // Board Type Normal/HighPower/MiniCard/SLIM/Combo/... = 0/1/2/3/4/... u1Byte BoardType; u1Byte PackageType; u1Byte TypeGLNA; u1Byte TypeGPA; u1Byte TypeALNA; u1Byte TypeAPA; // with external LNA NO/Yes = 0/1 u1Byte ExtLNA; u1Byte ExtLNA5G; // with external PA NO/Yes = 0/1 u1Byte ExtPA; u1Byte ExtPA5G; // with external TRSW NO/Yes = 0/1 u1Byte ExtTRSW; u1Byte PatchID; //Customer ID BOOLEAN bInHctTest; BOOLEAN bWIFITest; BOOLEAN bDualMacSmartConcurrent; u4Byte BK_SupportAbility; u1Byte AntDivType; u1Byte odm_Regulation2_4G; u1Byte odm_Regulation5G; u1Byte IQKFWOffload; //-----------HOOK BEFORE REG INIT-----------// // // Dynamic Value // //--------- POINTER REFERENCE-----------// u1Byte u1Byte_temp; BOOLEAN BOOLEAN_temp; PADAPTER PADAPTER_temp; // MAC PHY Mode SMSP/DMSP/DMDP = 0/1/2 u1Byte *pMacPhyMode; //TX Unicast byte count u8Byte *pNumTxBytesUnicast; //RX Unicast byte count u8Byte *pNumRxBytesUnicast; // Wireless mode B/G/A/N = BIT0/BIT1/BIT2/BIT3 u1Byte *pWirelessMode; //ODM_WIRELESS_MODE_E // Frequence band 2.4G/5G = 0/1 u1Byte *pBandType; // Secondary channel offset don't_care/below/above = 0/1/2 u1Byte *pSecChOffset; // Security mode Open/WEP/AES/TKIP = 0/1/2/3 u1Byte *pSecurity; // BW info 20M/40M/80M = 0/1/2 u1Byte *pBandWidth; // Central channel location Ch1/Ch2/.... u1Byte *pChannel; //central channel number BOOLEAN DPK_Done; // Common info for 92D DMSP BOOLEAN *pbGetValueFromOtherMac; PADAPTER *pBuddyAdapter; BOOLEAN *pbMasterOfDMSP; //MAC0: master, MAC1: slave // Common info for Status BOOLEAN *pbScanInProcess; BOOLEAN *pbPowerSaving; // CCA Path 2-path/path-A/path-B = 0/1/2; using ODM_CCA_PATH_E. u1Byte *pOnePathCCA; //pMgntInfo->AntennaTest u1Byte *pAntennaTest; BOOLEAN *pbNet_closed; //u1Byte *pAidMap; u1Byte *pu1ForcedIgiLb; BOOLEAN *pIsFcsModeEnable; //--------- For 8723B IQK-----------// BOOLEAN *pIs1Antenna; u1Byte *pRFDefaultPath; // 0:S1, 1:S0 //--------- POINTER REFERENCE-----------// pu2Byte pForcedDataRate; //------------CALL BY VALUE-------------// BOOLEAN bLinkInProcess; BOOLEAN bWIFI_Direct; BOOLEAN bWIFI_Display; BOOLEAN bLinked; BOOLEAN bsta_state; u1Byte RSSI_Min; u1Byte InterfaceIndex; // Add for 92D dual MAC: 0--Mac0 1--Mac1 BOOLEAN bIsMPChip; BOOLEAN bOneEntryOnly; BOOLEAN mp_mode; // Common info for BTDM BOOLEAN bBtEnabled; // BT is enabled BOOLEAN bBtConnectProcess; // BT HS is under connection progress. u1Byte btHsRssi; // BT HS mode wifi rssi value. BOOLEAN bBtHsOperation; // BT HS mode is under progress BOOLEAN bBtDisableEdcaTurbo; // Under some condition, don't enable the EDCA Turbo BOOLEAN bBtLimitedDig; // BT is busy. //------------CALL BY VALUE-------------// u1Byte RSSI_A; u1Byte RSSI_B; u1Byte RSSI_C; u1Byte RSSI_D; u8Byte RSSI_TRSW; u8Byte RSSI_TRSW_H; u8Byte RSSI_TRSW_L; u8Byte RSSI_TRSW_iso; u1Byte RxRate; BOOLEAN bNoisyState; u1Byte TxRate; u1Byte LinkedInterval; u1Byte preChannel; u4Byte TxagcOffsetValueA; BOOLEAN IsTxagcOffsetPositiveA; u4Byte TxagcOffsetValueB; BOOLEAN IsTxagcOffsetPositiveB; u8Byte lastTxOkCnt; u8Byte lastRxOkCnt; u4Byte BbSwingOffsetA; BOOLEAN IsBbSwingOffsetPositiveA; u4Byte BbSwingOffsetB; BOOLEAN IsBbSwingOffsetPositiveB; s1Byte TH_L2H_ini; s1Byte TH_EDCCA_HL_diff; s1Byte IGI_Base; u1Byte IGI_target; BOOLEAN ForceEDCCA; u1Byte AdapEn_RSSI; s1Byte Force_TH_H; s1Byte Force_TH_L; u1Byte IGI_LowerBound; u1Byte antdiv_rssi; u1Byte AntType; u1Byte pre_AntType; u1Byte antdiv_period; u1Byte antdiv_select; u1Byte NdpaPeriod; BOOLEAN H2C_RARpt_connect; // add by Yu Cehn for adaptivtiy BOOLEAN adaptivity_flag; u1Byte tolerance_cnt; u8Byte NHMCurTxOkcnt; u8Byte NHMCurRxOkcnt; u8Byte NHMLastTxOkcnt; u8Byte NHMLastRxOkcnt; u1Byte NHMWait; s1Byte H2L_lb; s1Byte L2H_lb; u1Byte Adaptivity_IGI_upper; u2Byte NHM_cnt_0; u2Byte NHM_cnt_1; BOOLEAN Carrier_Sense_enable; BOOLEAN bFirstLink; BOOLEAN bCheck; BOOLEAN EDCCA_enable_state; BOOLEAN NHM_enable; BOOLEAN DynamicLinkAdaptivity; BOOLEAN bAdaOn; ODM_NOISE_MONITOR noise_level;//[ODM_MAX_CHANNEL_NUM]; // //2 Define STA info. // _ODM_STA_INFO // 2012/01/12 MH For MP, we need to reduce one array pointer for default port.?? PSTA_INFO_T pODM_StaInfo[ODM_ASSOCIATE_ENTRY_NUM]; #if (RATE_ADAPTIVE_SUPPORT == 1) u2Byte CurrminRptTime; ODM_RA_INFO_T RAInfo[ODM_ASSOCIATE_ENTRY_NUM]; //See HalMacID support #endif // // 2012/02/14 MH Add to share 88E ra with other SW team. // We need to colelct all support abilit to a proper area. // BOOLEAN RaSupport88E; // Define ........... // Latest packet phy info (ODM write) ODM_PHY_DBG_INFO_T PhyDbgInfo; //PHY_INFO_88E PhyInfo; // Latest packet phy info (ODM write) ODM_MAC_INFO *pMacInfo; //MAC_INFO_88E MacInfo; // Different Team independt structure?? // //TX_RTP_CMN TX_retrpo; //TX_RTP_88E TX_retrpo; //TX_RTP_8195 TX_retrpo; // //ODM Structure // FAT_T DM_FatTable; DIG_T DM_DigTable; PS_T DM_PSTable; Pri_CCA_T DM_PriCCA; #if (DM_ODM_SUPPORT_TYPE & ODM_WIN) RXHP_T DM_RXHP_Table; #endif RA_T DM_RA_Table; FALSE_ALARM_STATISTICS FalseAlmCnt; FALSE_ALARM_STATISTICS FlaseAlmCntBuddyAdapter; //#ifdef CONFIG_ANTENNA_DIVERSITY SWAT_T DM_SWAT_Table; BOOLEAN RSSI_test; CFO_TRACKING DM_CfoTrack; ACS DM_ACS; //#endif #if (DM_ODM_SUPPORT_TYPE & ODM_WIN) //Path Div Struct PATHDIV_PARA pathIQK; #endif EDCA_T DM_EDCA_Table; u4Byte WMMEDCA_BE; PATHDIV_T DM_PathDiv; // Copy from SD4 structure // // ================================================== // //common //u1Byte DM_Type; //u1Byte PSD_Report_RXHP[80]; // Add By Gary //u1Byte PSD_func_flag; // Add By Gary //for DIG //u1Byte bDMInitialGainEnable; //u1Byte binitialized; // for dm_initial_gain_Multi_STA use. //for Antenna diversity //u8 AntDivCfg;// 0:OFF , 1:ON, 2:by efuse //PSTA_INFO_T RSSI_target; BOOLEAN *pbDriverStopped; BOOLEAN *pbDriverIsGoingToPnpSetPowerSleep; BOOLEAN *pinit_adpt_in_progress; //PSD BOOLEAN bUserAssignLevel; RT_TIMER PSDTimer; u1Byte RSSI_BT; //come from BT BOOLEAN bPSDinProcess; BOOLEAN bPSDactive; BOOLEAN bDMInitialGainEnable; //MPT DIG RT_TIMER MPT_DIGTimer; //for rate adaptive, in fact, 88c/92c fw will handle this u1Byte bUseRAMask; ODM_RATE_ADAPTIVE RateAdaptive; ANT_DETECTED_INFO AntDetectedInfo; // Antenna detected information for RSSI tool ODM_RF_CAL_T RFCalibrateInfo; // // TX power tracking // u1Byte BbSwingIdxOfdm[MAX_RF_PATH]; u1Byte BbSwingIdxOfdmCurrent; u1Byte BbSwingIdxOfdmBase[MAX_RF_PATH]; BOOLEAN BbSwingFlagOfdm; u1Byte BbSwingIdxCck; u1Byte BbSwingIdxCckCurrent; u1Byte BbSwingIdxCckBase; u1Byte DefaultOfdmIndex; u1Byte DefaultCckIndex; BOOLEAN BbSwingFlagCck; s1Byte Absolute_OFDMSwingIdx[MAX_RF_PATH]; s1Byte Remnant_OFDMSwingIdx[MAX_RF_PATH]; s1Byte Remnant_CCKSwingIdx; s1Byte Modify_TxAGC_Value; //Remnat compensate value at TxAGC BOOLEAN Modify_TxAGC_Flag_PathA; BOOLEAN Modify_TxAGC_Flag_PathB; BOOLEAN Modify_TxAGC_Flag_PathC; BOOLEAN Modify_TxAGC_Flag_PathD; BOOLEAN Modify_TxAGC_Flag_PathA_CCK; s1Byte KfreeOffset[MAX_RF_PATH]; // // Dynamic ATC switch // #if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE)) // // Power Training // BOOLEAN bDisablePowerTraining; u1Byte ForcePowerTrainingState; BOOLEAN bChangeState; u4Byte PT_score; u8Byte OFDM_RX_Cnt; u8Byte CCK_RX_Cnt; #endif // // ODM system resource. // // ODM relative time. RT_TIMER PathDivSwitchTimer; //2011.09.27 add for Path Diversity RT_TIMER CCKPathDiversityTimer; RT_TIMER FastAntTrainingTimer; // ODM relative workitem. #if (DM_ODM_SUPPORT_TYPE == ODM_WIN) #if USE_WORKITEM RT_WORK_ITEM PathDivSwitchWorkitem; RT_WORK_ITEM CCKPathDiversityWorkitem; RT_WORK_ITEM FastAntTrainingWorkitem; RT_WORK_ITEM MPT_DIGWorkitem; RT_WORK_ITEM RaRptWorkitem; #endif #endif #if (BEAMFORMING_SUPPORT == 1) RT_BEAMFORMING_INFO BeamformingInfo; #endif #if(DM_ODM_SUPPORT_TYPE & ODM_WIN) #if (RT_PLATFORM != PLATFORM_LINUX) } DM_ODM_T, *PDM_ODM_T; // DM_Dynamic_Mechanism_Structure #else }; #endif #else// for AP,ADSL,CE Team } DM_ODM_T, *PDM_ODM_T; // DM_Dynamic_Mechanism_Structure #endif #if 1 //92c-series #define ODM_RF_PATH_MAX 2 #else //jaguar - series #define ODM_RF_PATH_MAX 4 #endif typedef enum _ODM_RF_RADIO_PATH { ODM_RF_PATH_A = 0, //Radio Path A ODM_RF_PATH_B = 1, //Radio Path B ODM_RF_PATH_C = 2, //Radio Path C ODM_RF_PATH_D = 3, //Radio Path D ODM_RF_PATH_AB, ODM_RF_PATH_AC, ODM_RF_PATH_AD, ODM_RF_PATH_BC, ODM_RF_PATH_BD, ODM_RF_PATH_CD, ODM_RF_PATH_ABC, ODM_RF_PATH_ACD, ODM_RF_PATH_BCD, ODM_RF_PATH_ABCD, // ODM_RF_PATH_MAX, //Max RF number 90 support } ODM_RF_RADIO_PATH_E, *PODM_RF_RADIO_PATH_E; typedef enum _ODM_RF_CONTENT{ odm_radioa_txt = 0x1000, odm_radiob_txt = 0x1001, odm_radioc_txt = 0x1002, odm_radiod_txt = 0x1003 } ODM_RF_CONTENT; typedef enum _ODM_BB_Config_Type{ CONFIG_BB_PHY_REG, CONFIG_BB_AGC_TAB, CONFIG_BB_AGC_TAB_2G, CONFIG_BB_AGC_TAB_5G, CONFIG_BB_PHY_REG_PG, CONFIG_BB_PHY_REG_MP, CONFIG_BB_AGC_TAB_DIFF, } ODM_BB_Config_Type, *PODM_BB_Config_Type; typedef enum _ODM_RF_Config_Type{ CONFIG_RF_RADIO, CONFIG_RF_TXPWR_LMT, } ODM_RF_Config_Type, *PODM_RF_Config_Type; typedef enum _ODM_FW_Config_Type{ CONFIG_FW_NIC, CONFIG_FW_NIC_2, CONFIG_FW_AP, CONFIG_FW_MP, CONFIG_FW_WoWLAN, CONFIG_FW_WoWLAN_2, CONFIG_FW_AP_WoWLAN, CONFIG_FW_BT, } ODM_FW_Config_Type; // Status code #if (DM_ODM_SUPPORT_TYPE != ODM_WIN) typedef enum _RT_STATUS{ RT_STATUS_SUCCESS, RT_STATUS_FAILURE, RT_STATUS_PENDING, RT_STATUS_RESOURCE, RT_STATUS_INVALID_CONTEXT, RT_STATUS_INVALID_PARAMETER, RT_STATUS_NOT_SUPPORT, RT_STATUS_OS_API_FAILED, }RT_STATUS,*PRT_STATUS; #endif // end of RT_STATUS definition #ifdef REMOVE_PACK #pragma pack() #endif //#include "odm_function.h" //3=========================================================== //3 DIG //3=========================================================== //Remove DIG by Yuchen //3=========================================================== //3 AGC RX High Power Mode //3=========================================================== #define LNA_Low_Gain_1 0x64 #define LNA_Low_Gain_2 0x5A #define LNA_Low_Gain_3 0x58 #define FA_RXHP_TH1 5000 #define FA_RXHP_TH2 1500 #define FA_RXHP_TH3 800 #define FA_RXHP_TH4 600 #define FA_RXHP_TH5 500 //3=========================================================== //3 EDCA //3=========================================================== //3=========================================================== //3 Dynamic Tx Power //3=========================================================== //Dynamic Tx Power Control Threshold //Remove By YuChen //3=========================================================== //3 Tx Power Tracking //3=========================================================== #if 0 //mask this, since these have been defined in typdef.h, vivi #define OFDM_TABLE_SIZE 43 #define CCK_TABLE_SIZE 33 #endif //3=========================================================== //3 Rate Adaptive //3=========================================================== //Remove to odm_RaInfo.h by RS_James //3=========================================================== //3 BB Power Save //3=========================================================== typedef enum tag_1R_CCA_Type_Definition { CCA_1R =0, CCA_2R = 1, CCA_MAX = 2, }DM_1R_CCA_E; typedef enum tag_RF_Type_Definition { RF_Save =0, RF_Normal = 1, RF_MAX = 2, }DM_RF_E; //3=========================================================== //3 Antenna Diversity //3=========================================================== typedef enum tag_SW_Antenna_Switch_Definition { Antenna_A = 1, Antenna_B = 2, Antenna_MAX = 3, }DM_SWAS_E; // Maximal number of antenna detection mechanism needs to perform, added by Roger, 2011.12.28. #define MAX_ANTENNA_DETECTION_CNT 10 // // Extern Global Variables. // //remove PT by YuChen // // check Sta pointer valid or not // #if (DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL)) #define IS_STA_VALID(pSta) (pSta && pSta->expire_to) #elif (DM_ODM_SUPPORT_TYPE & ODM_WIN) #define IS_STA_VALID(pSta) (pSta && pSta->bUsed) #else #define IS_STA_VALID(pSta) (pSta) #endif // 20100514 Joseph: Add definition for antenna switching test after link. // This indicates two different the steps. // In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air. // In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK // with original RSSI to determine if it is necessary to switch antenna. #define SWAW_STEP_PEAK 0 #define SWAW_STEP_DETERMINE 1 //Remove DIG by yuchen //Remove BB power saving by Yuchen //ODM_RAStateCheck() Remove by RS_James #if(DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_AP|ODM_ADSL)) //============================================================ // function prototype //============================================================ //#define DM_ChangeDynamicInitGainThresh ODM_ChangeDynamicInitGainThresh //void ODM_ChangeDynamicInitGainThresh(IN PADAPTER pAdapter, // IN INT32 DM_Type, // IN INT32 DM_Value); //Remove DIG by yuchen BOOLEAN ODM_CheckPowerStatus( IN PADAPTER Adapter ); //Remove ODM_RateAdaptiveStateApInit() by RS_James //Remove Edca by YuChen #endif #if((DM_ODM_SUPPORT_TYPE==ODM_WIN)||(DM_ODM_SUPPORT_TYPE==ODM_CE)) u4Byte ConvertTo_dB(u4Byte Value); u4Byte GetPSDData( PDM_ODM_T pDM_Odm, unsigned int point, u1Byte initial_gain_psd); #endif //Remove ODM_Get_Rate_Bitmap() by RS_James #if (BEAMFORMING_SUPPORT == 1) BEAMFORMING_CAP Beamforming_GetEntryBeamCapByMacId( IN PMGNT_INFO pMgntInfo, IN u1Byte MacId ); #endif VOID ODM_DMInit( IN PDM_ODM_T pDM_Odm ); VOID ODM_DMReset( IN PDM_ODM_T pDM_Odm ); VOID ODM_DMWatchdog( IN PDM_ODM_T pDM_Odm // For common use in the future ); VOID ODM_CmnInfoInit( IN PDM_ODM_T pDM_Odm, IN ODM_CMNINFO_E CmnInfo, IN u4Byte Value ); VOID ODM_CmnInfoHook( IN PDM_ODM_T pDM_Odm, IN ODM_CMNINFO_E CmnInfo, IN PVOID pValue ); VOID ODM_CmnInfoPtrArrayHook( IN PDM_ODM_T pDM_Odm, IN ODM_CMNINFO_E CmnInfo, IN u2Byte Index, IN PVOID pValue ); VOID ODM_CmnInfoUpdate( IN PDM_ODM_T pDM_Odm, IN u4Byte CmnInfo, IN u8Byte Value ); VOID ODM_InitAllTimers( IN PDM_ODM_T pDM_Odm ); VOID ODM_CancelAllTimers( IN PDM_ODM_T pDM_Odm ); VOID ODM_ReleaseAllTimers( IN PDM_ODM_T pDM_Odm ); VOID ODM_ResetIQKResult( IN PDM_ODM_T pDM_Odm ); #if (DM_ODM_SUPPORT_TYPE == ODM_WIN) VOID ODM_InitAllWorkItems(IN PDM_ODM_T pDM_Odm ); VOID ODM_FreeAllWorkItems(IN PDM_ODM_T pDM_Odm ); //===========================================// // Neil Chen----2011--06--15-- //3 Path Diversity //=========================================================== #define TP_MODE 0 #define RSSI_MODE 1 #define TRAFFIC_LOW 0 #define TRAFFIC_HIGH 1 //#define PATHDIV_ENABLE 1 //#define dm_PathDiv_RSSI_Check ODM_PathDivChkPerPktRssi u8Byte PlatformDivision64( IN u8Byte x, IN u8Byte y ); // 20100514 Joseph: Add definition for antenna switching test after link. // This indicates two different the steps. // In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air. // In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK // with original RSSI to determine if it is necessary to switch antenna. #define SWAW_STEP_PEAK 0 #define SWAW_STEP_DETERMINE 1 //==================================================== //3 PathDiV End //==================================================== //#define PathDivCheckBeforeLink8192C ODM_PathDiversityBeforeLink92C #define DM_ChangeDynamicInitGainThresh ODM_ChangeDynamicInitGainThresh //void ODM_ChangeDynamicInitGainThresh(IN PADAPTER pAdapter, // IN INT32 DM_Type, // IN INT32 DM_Value); // typedef enum tag_DIG_Connect_Definition { DIG_STA_DISCONNECT = 0, DIG_STA_CONNECT = 1, DIG_STA_BEFORE_CONNECT = 2, DIG_MultiSTA_DISCONNECT = 3, DIG_MultiSTA_CONNECT = 4, DIG_CONNECT_MAX }DM_DIG_CONNECT_E; // // 2012/01/12 MH Check afapter status. Temp fix BSOD. // #define HAL_ADAPTER_STS_CHK(pDM_Odm)\ if (pDM_Odm->Adapter == NULL)\ {\ return;\ }\ // // For new definition in MP temporarily fro power tracking, // #define odm_TXPowerTrackingDirectCall(_Adapter) \ IS_HARDWARE_TYPE_8192D(_Adapter) ? odm_TXPowerTrackingCallback_ThermalMeter_92D(_Adapter) : \ IS_HARDWARE_TYPE_8192C(_Adapter) ? odm_TXPowerTrackingCallback_ThermalMeter_92C(_Adapter) : \ IS_HARDWARE_TYPE_8723A(_Adapter) ? odm_TXPowerTrackingCallback_ThermalMeter_8723A(_Adapter) :\ ODM_TXPowerTrackingCallback_ThermalMeter(_Adapter) #endif // #if (DM_ODM_SUPPORT_TYPE == ODM_WIN) #if( DM_ODM_SUPPORT_TYPE & (ODM_WIN |ODM_CE)) VOID ODM_SingleDualAntennaDefaultSetting( IN PDM_ODM_T pDM_Odm ); BOOLEAN ODM_SingleDualAntennaDetection( IN PDM_ODM_T pDM_Odm, IN u1Byte mode ); #endif // #if((DM_ODM_SUPPORT_TYPE==ODM_WIN)||(DM_ODM_SUPPORT_TYPE==ODM_CE)) VOID ODM_UpdateNoisyState( IN PDM_ODM_T pDM_Odm, IN BOOLEAN bNoisyStateFromC2H ); u4Byte Set_RA_DM_Ratrbitmap_by_Noisy( IN PDM_ODM_T pDM_Odm, IN WIRELESS_MODE WirelessMode, IN u4Byte ratr_bitmap, IN u1Byte rssi_level ); VOID ODM_UpdateInitRate( IN PDM_ODM_T pDM_Odm, IN u1Byte Rate ); VOID ODM_InitializeTimer( IN PDM_ODM_T pDM_Odm, IN PRT_TIMER pTimer, IN RT_TIMER_CALL_BACK CallBackFunc, IN PVOID pContext, IN const char* szID ); VOID ODM_CancelAllTimers( IN PDM_ODM_T pDM_Odm ); VOID ODM_ReleaseAllTimers( IN PDM_ODM_T pDM_Odm ); //Remove ODM_DynamicARFBSelect() by RS_James #if (DM_ODM_SUPPORT_TYPE == ODM_CE) void odm_dtc(PDM_ODM_T pDM_Odm); #endif /* #if (DM_ODM_SUPPORT_TYPE == ODM_CE) */ #endif