/****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * ******************************************************************************/ #ifndef __RTL8814A_HAL_H__ #define __RTL8814A_HAL_H__ //#include "hal_com.h" #include "hal_data.h" //include HAL Related header after HAL Related compiling flags #include "rtl8814a_spec.h" #include "rtl8814a_rf.h" #include "rtl8814a_dm.h" #include "rtl8814a_recv.h" #include "rtl8814a_xmit.h" #include "rtl8814a_cmd.h" #include "rtl8814a_led.h" #include "Hal8814PwrSeq.h" #include "Hal8814PhyReg.h" #include "Hal8814PhyCfg.h" #ifdef DBG_CONFIG_ERROR_DETECT #include "rtl8814a_sreset.h" #endif //DBG_CONFIG_ERROR_DETECT typedef enum _TX_PWR_PERCENTAGE{ TX_PWR_PERCENTAGE_0 = 0x01, // 12.5% TX_PWR_PERCENTAGE_1 = 0x02, // 25% TX_PWR_PERCENTAGE_2 = 0x04, // 50% TX_PWR_PERCENTAGE_3 = 0x08, //100%, default target output power. } TX_PWR_PERCENTAGE; enum{ VOLTAGE_V25 = 0x03, LDOE25_SHIFT = 28 , }; /* max. iram is 64k , max dmen is 32k. Total = 96k = 0x18000*/ #define FW_SIZE 0x18000 #define FW_START_ADDRESS 0x1000 typedef struct _RT_FIRMWARE_8814 { FIRMWARE_SOURCE eFWSource; #ifdef CONFIG_EMBEDDED_FWIMG u8* szFwBuffer; #else u8 szFwBuffer[FW_SIZE]; #endif u32 ulFwLength; } RT_FIRMWARE_8814, *PRT_FIRMWARE_8814; #define PAGE_SIZE_TX_8814 PAGE_SIZE_128 #define BCNQ_PAGE_NUM_8814 0x08 //--------------------------------------------------------------------- // RTL8814AU From header //--------------------------------------------------------------------- #define RTL8814A_FW_IMG "rtl8814a/FW_NIC.bin" #define RTL8814A_FW_WW_IMG "rtl8814a/FW_WoWLAN.bin" #define RTL8814A_PHY_REG "rtl8814a/PHY_REG.txt" #define RTL8814A_PHY_RADIO_A "rtl8814a/RadioA.txt" #define RTL8814A_PHY_RADIO_B "rtl8814a/RadioB.txt" #define RTL8814A_PHY_RADIO_C "rtl8814a/RadioC.txt" #define RTL8814A_PHY_RADIO_D "rtl8814a/RadioD.txt" #define RTL8814A_TXPWR_TRACK "rtl8814a/TxPowerTrack.txt" #define RTL8814A_AGC_TAB "rtl8814a/AGC_TAB.txt" #define RTL8814A_PHY_MACREG "rtl8814a/MAC_REG.txt" #define RTL8814A_PHY_REG_PG "rtl8814a/PHY_REG_PG.txt" #define RTL8814A_PHY_REG_MP "rtl8814a/PHY_REG_MP.txt" #define RTL8814A_TXPWR_LMT "rtl8814a/TXPWR_LMT.txt" #define RTL8814A_WIFI_ANT_ISOLATION "rtl8814a/wifi_ant_isolation.txt" #define Rtl8814A_NIC_PWR_ON_FLOW rtl8814A_power_on_flow #define Rtl8814A_NIC_RF_OFF_FLOW rtl8814A_radio_off_flow #define Rtl8814A_NIC_DISABLE_FLOW rtl8814A_card_disable_flow #define Rtl8814A_NIC_ENABLE_FLOW rtl8814A_card_enable_flow #define Rtl8814A_NIC_SUSPEND_FLOW rtl8814A_suspend_flow #define Rtl8814A_NIC_RESUME_FLOW rtl8814A_resume_flow #define Rtl8814A_NIC_PDN_FLOW rtl8814A_hwpdn_flow #define Rtl8814A_NIC_LPS_ENTER_FLOW rtl8814A_enter_lps_flow #define Rtl8814A_NIC_LPS_LEAVE_FLOW rtl8814A_leave_lps_flow //===================================================== // New Firmware Header(8-byte alinment required) //===================================================== //--- LONG WORD 0 ---- #define GET_FIRMWARE_HDR_SIGNATURE_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr, 0, 16) #define GET_FIRMWARE_HDR_CATEGORY_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr, 16, 8) // AP/NIC and USB/PCI #define GET_FIRMWARE_HDR_FUNCTION_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr, 24, 8) // Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions #define GET_FIRMWARE_HDR_VERSION_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+4, 0, 16)// FW Version #define GET_FIRMWARE_HDR_SUB_VER_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+4, 16, 8) // FW Subversion, default 0x00 #define GET_FIRMWARE_HDR_SUB_IDX_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+4, 24, 8) // FW Subversion Index //--- LONG WORD 1 ---- #define GET_FIRMWARE_HDR_SVN_IDX_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+8, 0, 32)// The SVN entry index #define GET_FIRMWARE_HDR_RSVD1_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+12, 0, 32) //--- LONG WORD 2 ---- #define GET_FIRMWARE_HDR_MONTH_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+16, 0, 8) // Release time Month field #define GET_FIRMWARE_HDR_DATE_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+16, 8, 8) // Release time Date field #define GET_FIRMWARE_HDR_HOUR_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+16, 16, 8)// Release time Hour field #define GET_FIRMWARE_HDR_MINUTE_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+16, 24, 8)// Release time Minute field #define GET_FIRMWARE_HDR_YEAR_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+20, 0, 16)// Release time Year field #define GET_FIRMWARE_HDR_FOUNDRY_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+20, 16, 8)// Release time Foundry field #define GET_FIRMWARE_HDR_RSVD2_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+20, 24, 8) //--- LONG WORD 3 ---- #define GET_FIRMWARE_HDR_MEM_UASGE_DL_FROM_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 0, 1) #define GET_FIRMWARE_HDR_MEM_UASGE_BOOT_FROM_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 1, 1) #define GET_FIRMWARE_HDR_MEM_UASGE_BOOT_LOADER_3081(__FwHdr)LE_BITS_TO_4BYTE(__FwHdr+24, 2, 1) #define GET_FIRMWARE_HDR_MEM_UASGE_IRAM_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 3, 1) #define GET_FIRMWARE_HDR_MEM_UASGE_ERAM_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 4, 1) #define GET_FIRMWARE_HDR_MEM_UASGE_RSVD4_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 5, 3) #define GET_FIRMWARE_HDR_RSVD3_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 8, 8) #define GET_FIRMWARE_HDR_BOOT_LOADER_SZ_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 16, 16) #define GET_FIRMWARE_HDR_RSVD5_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+28, 0, 32) //--- LONG WORD 4 ---- #define GET_FIRMWARE_HDR_TOTAL_DMEM_SZ_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+36, 0, 32) #define GET_FIRMWARE_HDR_FW_CFG_SZ_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+36, 0, 16) #define GET_FIRMWARE_HDR_FW_ATTR_SZ_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+36, 16, 16) //--- LONG WORD 5 ---- #define GET_FIRMWARE_HDR_IROM_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+40, 0, 32) #define GET_FIRMWARE_HDR_EROM_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+44, 0, 32) //--- LONG WORD 6 ---- #define GET_FIRMWARE_HDR_IRAM_SZ_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+48, 0, 32) #define GET_FIRMWARE_HDR_ERAM_SZ_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+52, 0, 32) //--- LONG WORD 7 ---- #define GET_FIRMWARE_HDR_RSVD6_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+56, 0, 32) #define GET_FIRMWARE_HDR_RSVD7_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+60, 0, 32) // // 2013/08/16 MH MOve from SDIO.h for common use. // #if defined(CONFIG_SDIO_HCI) || defined(CONFIG_USB_HCI) #define TRX_SHARE_MODE_8814A 0 //TRX Buffer Share Index #define BASIC_RXFF_SIZE_8814A 24576//Basic RXFF Size is 24K = 24*1024 Unit: Byte #define TRX_SHARE_BUFF_UNIT_8814A 65536//TRX Share Buffer unit Size 64K = 64*1024 Unit: Byte #define TRX_SHARE_BUFF_UNIT_PAGE_8814A TRX_SHARE_BUFF_UNIT_8814A/PAGE_SIZE_8814A//512 Pages //Origin: #define HPQ_PGNUM_8814A 0x20 //High Queue #define LPQ_PGNUM_8814A 0x20 //Low Queue #define NPQ_PGNUM_8814A 0x20 //Normal Queue #define EPQ_PGNUM_8814A 0x20 //Extra Queue #else // #if defined(CONFIG_SDIO_HCI) || defined(CONFIG_USB_HCI) #define HPQ_PGNUM_8814A 20 #define NPQ_PGNUM_8814A 20 #define LPQ_PGNUM_8814A 20 //1972 #define EPQ_PGNUM_8814A 20 #define BCQ_PGNUM_8814A 32 #endif //#if defined(CONFIG_SDIO_HCI) || defined(CONFIG_USB_HCI) #ifdef CONFIG_WOWLAN #define WOWLAN_PAGE_NUM_8814 0x00 #else #define WOWLAN_PAGE_NUM_8814 0x00 #endif #define PAGE_SIZE_8814A 128//TXFF Page Size, Unit: Byte #define MAX_RX_DMA_BUFFER_SIZE_8814A 0x5C00 //BASIC_RXFF_SIZE_8814A+TRX_SHARE_MODE_8814A*TRX_SHARE_BUFF_UNIT_8814A //Basic RXFF Size + ShareBuffer Size #define TX_PAGE_BOUNDARY_8814A TXPKT_PGNUM_8814A // Need to enlarge boundary, by KaiYuan #define TX_PAGE_BOUNDARY_WOWLAN_8814A TXPKT_PGNUM_8814A //TODO: 20130415 KaiYuan Check this value later #define TOTAL_PGNUM_8814A 2048 #define TXPKT_PGNUM_8814A (2048 - BCNQ_PAGE_NUM_8814-WOWLAN_PAGE_NUM_8814) #define PUB_PGNUM_8814A (TXPKT_PGNUM_8814A-HPQ_PGNUM_8814A-NPQ_PGNUM_8814A-LPQ_PGNUM_8814A-EPQ_PGNUM_8814A) //Note: For WMM Normal Chip Setting ,modify later #define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_8814A TX_PAGE_BOUNDARY_8814A #define WMM_NORMAL_TX_PAGE_BOUNDARY_8814A (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_8814A + 1) #define DRIVER_EARLY_INT_TIME_8814 0x05 #define BCN_DMA_ATIME_INT_TIME_8814 0x02 #define MAX_PAGE_SIZE 4096 // @ page : 4k bytes #define EFUSE_MAX_SECTION_JAGUAR 64 #define HWSET_MAX_SIZE_8814A 512 #define EFUSE_REAL_CONTENT_LEN_8814A 1024 #define EFUSE_MAX_BANK_8814A 2 #define EFUSE_MAP_LEN_8814A 512 #define EFUSE_MAX_SECTION_8814A 64 #define EFUSE_MAX_WORD_UNIT_8814A 4 #define EFUSE_PROTECT_BYTES_BANK_8814A 16 #define EFUSE_IC_ID_OFFSET_8814A 506 //For some inferiority IC purpose. added by Roger, 2009.09.02. #define AVAILABLE_EFUSE_ADDR_8814A(addr) (addr < EFUSE_REAL_CONTENT_LEN_8814A) /*------------------------------------------------------------------------- Chip specific -------------------------------------------------------------------------*/ /* pic buffer descriptor */ #if 1 /* according to the define in the rtw_xmit.h, rtw_recv.h */ #define RTL8814AE_SEG_NUM TX_BUFFER_SEG_NUM /* 0:2 seg, 1: 4 seg, 2: 8 seg */ #define TX_DESC_NUM_8814A TXDESC_NUM /* 128 */ #define RX_DESC_NUM_8814A PCI_MAX_RX_COUNT /* 128 */ #ifdef CONFIG_CONCURRENT_MODE #define BE_QUEUE_TX_DESC_NUM_8814A (TXDESC_NUM<<1) /* 256 */ #else #define BE_QUEUE_TX_DESC_NUM_8814A (TXDESC_NUM+(TXDESC_NUM>>1)) /* 192 */ #endif #else #define RTL8814AE_SEG_NUM TX_BUFFER_SEG_NUM /* 0:2 seg, 1: 4 seg, 2: 8 seg */ #define TX_DESC_NUM_8814A 128 /* 1024//2048 change by ylb 20130624 */ #define RX_DESC_NUM_8814A 128 /* 1024 //512 change by ylb 20130624 */ #endif // To prevent out of boundary programming case, leave 1byte and program full section // 9bytes + 1byt + 5bytes and pre 1byte. // For worst case: // | 1byte|----8bytes----|1byte|--5bytes--| // | | Reserved(14bytes) | // #define EFUSE_OOB_PROTECT_BYTES 15 // PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. /* rtl8814_hal_init.c */ s32 FirmwareDownload8814A( PADAPTER Adapter, BOOLEAN bUsedWoWLANFw); void InitializeFirmwareVars8814(PADAPTER padapter); VOID Hal_InitEfuseVars_8814A( IN PADAPTER Adapter ); s32 InitLLTTable8814A( IN PADAPTER Adapter ); void InitRDGSetting8814A(PADAPTER padapter); //void CheckAutoloadState8812A(PADAPTER padapter); // EFuse u8 GetEEPROMSize8814A(PADAPTER padapter); void InitPGData8814A(PADAPTER padapter); void hal_ReadPROMVersion8814A(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void hal_ReadTxPowerInfo8814A(PADAPTER padapter, u8* hwinfo,BOOLEAN AutoLoadFail); void hal_ReadBoardType8814A(PADAPTER pAdapter, u8* hwinfo,BOOLEAN AutoLoadFail); void hal_ReadThermalMeter_8814A(PADAPTER Adapter, u8* PROMContent,BOOLEAN AutoloadFail); void hal_ReadChannelPlan8814A(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void hal_EfuseParseXtal_8814A(PADAPTER pAdapter, u8* hwinfo,BOOLEAN AutoLoadFail); void hal_ReadAntennaDiversity8814A(PADAPTER pAdapter,u8* PROMContent,BOOLEAN AutoLoadFail); void hal_Read_TRX_antenna_8814A(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail); VOID hal_ReadAmplifierType_8814A( IN PADAPTER Adapter ); VOID hal_ReadPAType_8814A( IN PADAPTER Adapter, IN u8* PROMContent, IN BOOLEAN AutoloadFail, OUT u8* pPAType, OUT u8* pLNAType ); void hal_GetRxGainOffset_8814A( PADAPTER Adapter, pu1Byte PROMContent, BOOLEAN AutoloadFail ); void Hal_EfuseParseKFreeData_8814A( IN PADAPTER Adapter, IN u8 *PROMContent, IN BOOLEAN AutoloadFail); void hal_ReadRFEType_8814A(PADAPTER Adapter,u8* PROMContent, BOOLEAN AutoloadFail); void hal_EfuseParseBTCoexistInfo8814A(PADAPTER Adapter, u8* hwinfo, BOOLEAN AutoLoadFail); //void hal_ReadUsbType_8812AU(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail); //int FirmwareDownloadBT(PADAPTER Adapter, PRT_MP_FIRMWARE pFirmware); void hal_ReadRemoteWakeup_8814A(PADAPTER padapter, u8* hwinfo, BOOLEAN AutoLoadFail); u8 MgntQuery_NssTxRate(u16 Rate); //BOOLEAN HalDetectPwrDownMode8812(PADAPTER Adapter); #ifdef CONFIG_WOWLAN void Hal_DetectWoWMode(PADAPTER pAdapter); #endif //CONFIG_WOWLAN void _InitBeaconParameters_8814A(PADAPTER padapter); void SetBeaconRelatedRegisters8814A(PADAPTER padapter); void ReadRFType8814A(PADAPTER padapter); void InitDefaultValue8814A(PADAPTER padapter); void SetHwReg8814A(PADAPTER padapter, u8 variable, u8 *pval); void GetHwReg8814A(PADAPTER padapter, u8 variable, u8 *pval); u8 SetHalDefVar8814A(PADAPTER padapter, HAL_DEF_VARIABLE variable, void *pval); u8 GetHalDefVar8814A(PADAPTER padapter, HAL_DEF_VARIABLE variable, void *pval); s32 c2h_id_filter_ccx_8814a(u8 *buf); void rtl8814_set_hal_ops(struct hal_ops *pHalFunc); void init_hal_spec_8814a(_adapter *adapter); // register void SetBcnCtrlReg(PADAPTER padapter, u8 SetBits, u8 ClearBits); void SetBcnCtrlReg(PADAPTER Adapter, u8 SetBits, u8 ClearBits); void rtl8814_start_thread(PADAPTER padapter); void rtl8814_stop_thread(PADAPTER padapter); #ifdef CONFIG_PCI_HCI BOOLEAN InterruptRecognized8814AE(PADAPTER Adapter); VOID UpdateInterruptMask8814AE(PADAPTER Adapter, u32 AddMSR, u32 AddMSR1, u32 RemoveMSR, u32 RemoveMSR1); u16 get_txbd_idx_addr(u16 ff_hwaddr); #endif #ifdef CONFIG_BT_COEXIST void rtl8812a_combo_card_WifiOnlyHwInit(PADAPTER Adapter); #endif #endif //__RTL8188E_HAL_H__