/****************************************************************************** * * Copyright(c) 2007 - 2017 Realtek Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * *****************************************************************************/ #ifndef __RTL8188F_HAL_H__ #define __RTL8188F_HAL_H__ #include "hal_data.h" #include "rtl8188f_spec.h" #include "rtl8188f_rf.h" #include "rtl8188f_dm.h" #include "rtl8188f_recv.h" #include "rtl8188f_xmit.h" #include "rtl8188f_cmd.h" #include "rtl8188f_led.h" #include "Hal8188FPwrSeq.h" #include "Hal8188FPhyReg.h" #include "Hal8188FPhyCfg.h" #ifdef DBG_CONFIG_ERROR_DETECT #include "rtl8188f_sreset.h" #endif #define FW_8188F_SIZE 0x8000 #define FW_8188F_START_ADDRESS 0x1000 #define FW_8188F_END_ADDRESS 0x1FFF /* 0x5FFF */ #define IS_FW_HEADER_EXIST_8188F(_pFwHdr) ((le16_to_cpu(_pFwHdr->Signature) & 0xFFF0) == 0x88F0) typedef struct _RT_FIRMWARE { FIRMWARE_SOURCE eFWSource; #ifdef CONFIG_EMBEDDED_FWIMG u8 *szFwBuffer; #else u8 szFwBuffer[FW_8188F_SIZE]; #endif u32 ulFwLength; } RT_FIRMWARE_8188F, *PRT_FIRMWARE_8188F; /* * This structure must be cared byte-ordering * * Added by tynli. 2009.12.04. */ typedef struct _RT_8188F_FIRMWARE_HDR { /* 8-byte alinment required */ /* --- LONG WORD 0 ---- */ u16 Signature; /* 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut */ u8 Category; /* AP/NIC and USB/PCI */ u8 Function; /* Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions */ u16 Version; /* FW Version */ u16 Subversion; /* FW Subversion, default 0x00 */ /* --- LONG WORD 1 ---- */ u8 Month; /* Release time Month field */ u8 Date; /* Release time Date field */ u8 Hour; /* Release time Hour field */ u8 Minute; /* Release time Minute field */ u16 RamCodeSize; /* The size of RAM code */ u16 Rsvd2; /* --- LONG WORD 2 ---- */ u32 SvnIdx; /* The SVN entry index */ u32 Rsvd3; /* --- LONG WORD 3 ---- */ u32 Rsvd4; u32 Rsvd5; } RT_8188F_FIRMWARE_HDR, *PRT_8188F_FIRMWARE_HDR; #define DRIVER_EARLY_INT_TIME_8188F 0x05 #define BCN_DMA_ATIME_INT_TIME_8188F 0x02 /* for 8188F * TX 32K, RX 16K, Page size 128B for TX, 8B for RX */ #define PAGE_SIZE_TX_8188F 128 #define PAGE_SIZE_RX_8188F 8 #define RX_DMA_SIZE_8188F 0x4000 /* 16K */ #ifdef CONFIG_FW_C2H_DEBUG #define RX_DMA_RESERVED_SIZE_8188F 0x100 /* 256B, reserved for c2h debug message */ #else #define RX_DMA_RESERVED_SIZE_8188F 0x80 /* 128B, reserved for tx report */ #endif #ifdef CONFIG_WOWLAN #define RESV_FMWF (WKFMCAM_SIZE * MAX_WKFM_CAM_NUM) /* 16 entries, for each is 24 bytes*/ #else #define RESV_FMWF 0 #endif #define RX_DMA_BOUNDARY_8188F (RX_DMA_SIZE_8188F - RX_DMA_RESERVED_SIZE_8188F - 1) /* Note: We will divide number of page equally for each queue other than public queue! */ /* For General Reserved Page Number(Beacon Queue is reserved page) * BCN rsvd_page_num = MAX_BEACON_LEN / PAGE_SIZE_TX_8188F, * PS-Poll:1, Null Data:1,Qos Null Data:1,BT Qos Null Data:1, CTS-2-SELF / LTE QoS Null */ #define BCNQ_PAGE_NUM_8188F (MAX_BEACON_LEN / PAGE_SIZE_TX_8188F + 6) /*0x08*/ /* For WoWLan , more reserved page * ARP Rsp:1, RWC:1, GTK Info:1,GTK RSP:2,GTK EXT MEM:2, AOAC rpt:1 ,PNO: 6 * NS offload:2 NDP info: 1 */ #ifdef CONFIG_WOWLAN #define WOWLAN_PAGE_NUM_8188F 0x0b #else #define WOWLAN_PAGE_NUM_8188F 0x00 #endif #ifdef CONFIG_PNO_SUPPORT #undef WOWLAN_PAGE_NUM_8188F #define WOWLAN_PAGE_NUM_8188F 0x15 #endif #ifdef CONFIG_AP_WOWLAN #define AP_WOWLAN_PAGE_NUM_8188F 0x02 #endif #define TX_TOTAL_PAGE_NUMBER_8188F (0xFF - BCNQ_PAGE_NUM_8188F - WOWLAN_PAGE_NUM_8188F) #define TX_PAGE_BOUNDARY_8188F (TX_TOTAL_PAGE_NUMBER_8188F + 1) #define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_8188F TX_TOTAL_PAGE_NUMBER_8188F #define WMM_NORMAL_TX_PAGE_BOUNDARY_8188F (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_8188F + 1) /* For Normal Chip Setting * (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER_8188F */ #define NORMAL_PAGE_NUM_HPQ_8188F 0x0C #define NORMAL_PAGE_NUM_LPQ_8188F 0x02 #define NORMAL_PAGE_NUM_NPQ_8188F 0x02 /* Note: For Normal Chip Setting, modify later */ #define WMM_NORMAL_PAGE_NUM_HPQ_8188F 0x30 #define WMM_NORMAL_PAGE_NUM_LPQ_8188F 0x20 #define WMM_NORMAL_PAGE_NUM_NPQ_8188F 0x20 #include "HalVerDef.h" #include "hal_com.h" #define EFUSE_OOB_PROTECT_BYTES (34 + 1) #define HAL_EFUSE_MEMORY #define HWSET_MAX_SIZE_8188F 512 #define EFUSE_REAL_CONTENT_LEN_8188F 256 #define EFUSE_MAP_LEN_8188F 512 #define EFUSE_MAX_SECTION_8188F (EFUSE_MAP_LEN_8188F / 8) #define EFUSE_IC_ID_OFFSET 506 /* For some inferiority IC purpose. added by Roger, 2009.09.02. */ #define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN_8188F) #define EFUSE_ACCESS_ON 0x69 /* For RTL8188 only. */ #define EFUSE_ACCESS_OFF 0x00 /* For RTL8188 only. */ /* ******************************************************** * EFUSE for BT definition * ******************************************************** */ #define EFUSE_BT_REAL_BANK_CONTENT_LEN 512 #define EFUSE_BT_REAL_CONTENT_LEN 1536 /* 512*3 */ #define EFUSE_BT_MAP_LEN 1024 /* 1k bytes */ #define EFUSE_BT_MAX_SECTION 128 /* 1024/8 */ #define EFUSE_PROTECT_BYTES_BANK 16 #define INCLUDE_MULTI_FUNC_BT(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT) #define INCLUDE_MULTI_FUNC_GPS(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS) /* rtl8188a_hal_init.c */ s32 rtl8188f_FirmwareDownload(PADAPTER padapter, BOOLEAN bUsedWoWLANFw); void rtl8188f_FirmwareSelfReset(PADAPTER padapter); void rtl8188f_InitializeFirmwareVars(PADAPTER padapter); void rtl8188f_InitAntenna_Selection(PADAPTER padapter); void rtl8188f_DeinitAntenna_Selection(PADAPTER padapter); void rtl8188f_CheckAntenna_Selection(PADAPTER padapter); void rtl8188f_init_default_value(PADAPTER padapter); s32 rtl8188f_InitLLTTable(PADAPTER padapter); s32 CardDisableHWSM(PADAPTER padapter, u8 resetMCU); s32 CardDisableWithoutHWSM(PADAPTER padapter); /* EFuse */ u8 GetEEPROMSize8188F(PADAPTER padapter); void Hal_InitPGData(PADAPTER padapter, u8 *PROMContent); void Hal_EfuseParseIDCode(PADAPTER padapter, u8 *hwinfo); void Hal_EfuseParseTxPowerInfo_8188F(PADAPTER padapter, u8 *PROMContent, BOOLEAN AutoLoadFail); /* void Hal_EfuseParseBTCoexistInfo_8188F(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); */ void Hal_EfuseParseEEPROMVer_8188F(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseChnlPlan_8188F(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseCustomerID_8188F(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParsePowerSavingMode_8188F(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseAntennaDiversity_8188F(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseXtal_8188F(PADAPTER pAdapter, u8 *hwinfo, u8 AutoLoadFail); void Hal_EfuseParseThermalMeter_8188F(PADAPTER padapter, u8 *hwinfo, u8 AutoLoadFail); void Hal_EfuseParseKFreeData_8188F(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void rtl8188f_set_pll_ref_clk_sel(_adapter *adapter, u8 sel); void rtl8188f_set_hal_ops(struct hal_ops *pHalFunc); void init_hal_spec_8188f(_adapter *adapter); u8 SetHwReg8188F(PADAPTER padapter, u8 variable, u8 *val); void GetHwReg8188F(PADAPTER padapter, u8 variable, u8 *val); u8 SetHalDefVar8188F(PADAPTER padapter, HAL_DEF_VARIABLE variable, void *pval); u8 GetHalDefVar8188F(PADAPTER padapter, HAL_DEF_VARIABLE variable, void *pval); /* register */ void rtl8188f_InitBeaconParameters(PADAPTER padapter); void rtl8188f_InitBeaconMaxError(PADAPTER padapter, u8 InfraMode); void _InitBurstPktLen_8188FS(PADAPTER Adapter); void _8051Reset8188(PADAPTER padapter); #ifdef CONFIG_WOWLAN void Hal_DetectWoWMode(PADAPTER pAdapter); #endif /* CONFIG_WOWLAN */ void rtl8188f_start_thread(_adapter *padapter); void rtl8188f_stop_thread(_adapter *padapter); #if defined(CONFIG_CHECK_BT_HANG) && defined(CONFIG_BT_COEXIST) void rtl8188fs_init_checkbthang_workqueue(_adapter *adapter); void rtl8188fs_free_checkbthang_workqueue(_adapter *adapter); void rtl8188fs_cancle_checkbthang_workqueue(_adapter *adapter); void rtl8188fs_hal_check_bt_hang(_adapter *adapter); #endif #ifdef CONFIG_GPIO_WAKEUP void HalSetOutPutGPIO(PADAPTER padapter, u8 index, u8 OutPutValue); #endif #ifdef CONFIG_MP_INCLUDED int FirmwareDownloadBT(IN PADAPTER Adapter, PRT_MP_FIRMWARE pFirmware); #endif void CCX_FwC2HTxRpt_8188f(PADAPTER padapter, u8 *pdata, u8 len); u8 MRateToHwRate8188F(u8 rate); u8 HwRateToMRate8188F(u8 rate); #ifdef CONFIG_PCI_HCI BOOLEAN InterruptRecognized8188FE(PADAPTER Adapter); VOID UpdateInterruptMask8188FE(PADAPTER Adapter, u32 AddMSR, u32 AddMSR1, u32 RemoveMSR, u32 RemoveMSR1); #endif #endif