/****************************************************************************** * * Copyright(c) 2012 - 2017 Realtek Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * *****************************************************************************/ #define _HCI_HAL_INIT_C_ /* #include */ #include #ifndef CONFIG_USB_HCI #error "CONFIG_USB_HCI shall be on!\n" #endif static VOID _ConfigChipOutEP_8192E( IN PADAPTER pAdapter, IN u8 NumOutPipe ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); pHalData->OutEpQueueSel = 0; pHalData->OutEpNumber = 0; switch (NumOutPipe) { case 4: pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_LQ | TX_SELE_NQ | TX_SELE_EQ; pHalData->OutEpNumber = 4; break; case 3: pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_LQ | TX_SELE_NQ; pHalData->OutEpNumber = 3; break; case 2: pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_NQ; pHalData->OutEpNumber = 2; break; case 1: pHalData->OutEpQueueSel = TX_SELE_HQ; pHalData->OutEpNumber = 1; break; default: break; } RTW_INFO("%s OutEpQueueSel(0x%02x), OutEpNumber(%d)\n", __FUNCTION__, pHalData->OutEpQueueSel, pHalData->OutEpNumber); } static BOOLEAN HalUsbSetQueuePipeMapping8192EUsb( IN PADAPTER pAdapter, IN u8 NumInPipe, IN u8 NumOutPipe ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); BOOLEAN result = _FALSE; _ConfigChipOutEP_8192E(pAdapter, NumOutPipe); /* Normal chip with one IN and one OUT doesn't have interrupt IN EP. */ if (1 == pHalData->OutEpNumber) { if (1 != NumInPipe) return result; } /* All config other than above support one Bulk IN and one Interrupt IN. */ /* if(2 != NumInPipe){ */ /* return result; */ /* } */ result = Hal_MappingOutPipe(pAdapter, NumOutPipe); return result; } void rtl8192eu_interface_configure(_adapter *padapter) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); struct registry_priv *registry_par = &padapter->registrypriv; if (IS_HIGH_SPEED_USB(padapter)) { pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;/* 512 bytes */ } else { pHalData->UsbBulkOutSize = USB_FULL_SPEED_BULK_SIZE;/* 64 bytes */ } pHalData->interfaceIndex = pdvobjpriv->InterfaceNumber; #ifdef CONFIG_USB_TX_AGGREGATION pHalData->UsbTxAggMode = 1; pHalData->UsbTxAggDescNum = 3; /* only 4 bits */ #endif #ifdef CONFIG_USB_RX_AGGREGATION pHalData->rxagg_mode = registry_par->usb_rxagg_mode; if ((pHalData->rxagg_mode != RX_AGG_DMA) && (pHalData->rxagg_mode != RX_AGG_USB)) pHalData->rxagg_mode = RX_AGG_DMA; /* pHalData->UsbRxAggBlockCount = 8; */ /* unit : 512b */ /* pHalData->UsbRxAggBlockTimeout = 0x6; */ /* pHalData->UsbRxAggPageCount = 16; */ /* uint :128 b */ /* 0x0A; */ /* 10 = MAX_RX_DMA_BUFFER_SIZE/2/pHalData->UsbBulkOutSize */ /* pHalData->UsbRxAggPageTimeout = 0x6; */ /* 6, absolute time = 34ms/(2^6) */ if (pHalData->rxagg_mode == RX_AGG_DMA) { pHalData->rxagg_dma_size = 8;/* unit 1k for Rx DMA aggregation mode */ pHalData->rxagg_dma_timeout = 8;/* unit 32us */ } else if (pHalData->rxagg_mode == RX_AGG_USB) { #ifdef CONFIG_PREALLOC_RX_SKB_BUFFER u32 remainder = 0; u8 quotient = 0; remainder = MAX_RECVBUF_SZ % (4 * 1024); quotient = (u8)(MAX_RECVBUF_SZ >> 12); if (quotient > 5) { pHalData->rxagg_usb_size = 0x5; pHalData->rxagg_usb_timeout = 0x20; } else { if (remainder >= 2048) { pHalData->rxagg_usb_size = quotient; pHalData->rxagg_usb_timeout = 0x10; } else { pHalData->rxagg_usb_size = (quotient - 1); pHalData->rxagg_usb_timeout = 0x10; } } #elif defined(CONFIG_PLATFORM_HISILICON) pHalData->rxagg_usb_size = 3; /*unit 4k for USB aggregation mode */ pHalData->rxagg_usb_timeout = 8; /*unit 32us*/ #elif defined(CONFIG_PLATFORM_NOVATEK_NT72668) pHalData->rxagg_usb_size = 0x03; pHalData->rxagg_usb_timeout = 0x20; #else pHalData->rxagg_usb_size = 6; /* unit 4k for USB aggregation mode */ pHalData->rxagg_usb_timeout = 0x20; /* unit 32us */ #endif /* CONFIG_PREALLOC_RX_SKB_BUFFER */ } #endif HalUsbSetQueuePipeMapping8192EUsb(padapter, pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes); } static VOID _InitBurstPktLen_8192EU(IN PADAPTER Adapter) { #if 0 u1Byte speedvalue, provalue, temp; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); /* PlatformEFIOWrite2Byte(Adapter, REG_TRXDMA_CTRL_8195, 0xf5b0); */ /* PlatformEFIOWrite2Byte(Adapter, REG_TRXDMA_CTRL_8812, 0xf5b4); */ PlatformEFIOWrite2Byte(Adapter, REG_RXDMA_STATUS_8192E, 0x7400); /* burset lenght=4, set 0x3400 for burset length=2 */ PlatformEFIOWrite1Byte(Adapter, 0x289, 0xf5); /* for rxdma control */ /* PlatformEFIOWrite1Byte(Adapter, 0x3a, 0x46); */ /* 0x456 = 0x70, sugguested by Zhilin */ /* PlatformEFIOWrite1Byte(Adapter, REG_AMPDU_MAX_TIME_8192E, 0x70); */ /* Suggention by SD1 Jong and Pisa, by Maddest 20130107. */ PlatformEFIOWrite2Byte(Adapter, REG_MAX_AGGR_NUM_8192E, 0x0e0e); PlatformEFIOWrite1Byte(Adapter, REG_FWHW_TXQ_CTRL_8192E, 0x80);/* EN_AMPDU_RTY_NEW */ PlatformEFIOWrite1Byte(Adapter, REG_AMPDU_MAX_TIME_8192E, 0x5e); PlatformEFIOWrite4Byte(Adapter, REG_FAST_EDCA_CTRL_8192E, 0x03087777); /* PlatformEFIOWrite4Byte(Adapter, 0x458, 0xffffffff); */ PlatformEFIOWrite1Byte(Adapter, REG_USTIME_TSF_8192E, 0x50); PlatformEFIOWrite1Byte(Adapter, REG_USTIME_EDCA_8192E, 0x50); if (IS_HARDWARE_TYPE_8821U(Adapter) || IS_HARDWARE_TYPE_8192EU(Adapter)) speedvalue = BIT7; else speedvalue = PlatformEFIORead1Byte(Adapter, 0xff); /* check device operation speed: SS 0xff bit7 */ if (speedvalue & BIT7) { /* USB2/1.1 Mode */ temp = PlatformEFIORead1Byte(Adapter, REG_USB_INFO); if (((temp >> 4) & 0x03) == 0) { /* pHalData->UsbBulkOutSize = 512; */ provalue = PlatformEFIORead1Byte(Adapter, REG_RXDMA_PRO_8192E); PlatformEFIOWrite1Byte(Adapter, REG_RXDMA_PRO_8192E, (provalue | BIT(4) & (~BIT(5)))); /* set burst pkt len=512B */ PlatformEFIOWrite2Byte(Adapter, REG_RXDMA_PRO_8192E, 0x1e); } else { /* pHalData->UsbBulkOutSize = 64; */ provalue = PlatformEFIORead1Byte(Adapter, REG_RXDMA_PRO_8192E); PlatformEFIOWrite1Byte(Adapter, REG_RXDMA_PRO_8192E, ((provalue | BIT(5)) & (~BIT(4)))); /* set burst pkt len=64B */ } PlatformEFIOWrite2Byte(Adapter, REG_RXDMA_AGG_PG_TH_8192E, 0x2005); /* dmc agg th 20K */ pHalData->bSupportUSB3 = FALSE; } PlatformEFIOWrite1Byte(Adapter, REG_DWBCN0_CTRL_8192E, 0x10); PlatformEFIOWrite1Byte(Adapter, 0x4c7, PlatformEFIORead1Byte(Adapter, 0x4c7) | BIT(7)); /* enable single pkt ampdu */ PlatformEFIOWrite1Byte(Adapter, REG_RX_PKT_LIMIT_8192E, 0x18); /* for VHT packet length 11K */ /* PlatformEFIOWrite1Byte(Adapter, REG_MAX_AGGR_NUM_8192E, 0x1f); */ PlatformEFIOWrite1Byte(Adapter, REG_PIFS_8192E, 0x00); /* PlatformEFIOWrite1Byte(Adapter, REG_FWHW_TXQ_CTRL_8192E, PlatformEFIORead1Byte(Adapter, REG_FWHW_TXQ_CTRL)&(~BIT(7))); */ #ifdef CONFIG_TX_EARLY_MODE if (pHalData->AMPDUBurstMode) PlatformEFIOWrite1Byte(Adapter, REG_SW_AMPDU_BURST_MODE_CTRL_8192E, 0x5F); #endif PlatformEFIOWrite1Byte(Adapter, 0x1c, PlatformEFIORead1Byte(Adapter, 0x1c) | BIT(5) | BIT(6)); /* to prevent mac is reseted by bus. 20111208, by Page */ #endif } static u32 _InitPowerOn_8192EU(_adapter *padapter) { u16 value16; u32 value32; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); /* HW Power on sequence */ u8 bMacPwrCtrlOn = _FALSE; rtw_hal_get_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn); if (bMacPwrCtrlOn == _TRUE) return _SUCCESS; RTW_INFO("==>%s\n", __FUNCTION__); value32 = rtw_read32(padapter, REG_SYS_CFG1_8192E); if (value32 & BIT_SPSLDO_SEL) { /* LDO */ rtw_write8(padapter, REG_LDO_SWR_CTRL, 0xC3); } else { /* SPS */ /* 0x7C [6] = 1��b0 (IC default, 0x83) */ /* 0x14[23:20]=b��0101 (raise 1.2V voltage) u1Byte tmp1Byte = PlatformEFIORead1Byte(Adapter,0x16); PlatformEFIOWrite1Byte(Adapter,0x16,tmp1Byte |BIT4|BIT6); */ u32 voltage = rtw_read32(padapter , REG_SYS_SWR_CTRL2_8192E); if (((voltage & 0x00F00000) >> 20) == 0x4) { voltage = (voltage & 0xFF0FFFFF) | (0x05 << 20); rtw_write32(padapter , REG_SYS_SWR_CTRL2_8192E , voltage); } rtw_write8(padapter, REG_LDO_SWR_CTRL, 0x83); } /* adjust xtal/afe before enable PLL, suggest by SD1-Scott */ Hal_CrystalAFEAdjust(padapter); if (!HalPwrSeqCmdParsing(padapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, Rtl8192E_NIC_ENABLE_FLOW)) { RTW_INFO("%s: HalPwrSeqCmdParsing fail\n", __func__); return _FAIL; } /* Enable MAC DMA/WMAC/SCHEDULE/SEC block */ /* Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */ rtw_write16(padapter, REG_CR, 0x00); /* suggseted by zhouzhou, by page, 20111230 */ value16 = rtw_read16(padapter, REG_CR); value16 |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN | PROTOCOL_EN | SCHEDULE_EN | ENSEC | CALTMR_EN); rtw_write16(padapter, REG_CR, value16); bMacPwrCtrlOn = _TRUE; rtw_hal_set_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn); return _SUCCESS; } /* --------------------------------------------------------------- * * MAC init functions * * --------------------------------------------------------------- */ /* Shall USB interface init this? */ static VOID _InitInterrupt_8192EU( IN PADAPTER Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); /*HISR write one to clear*/ rtw_write32(Adapter, REG_HISR0_8192E, 0xFFFFFFFF); rtw_write32(Adapter, REG_HISR1_8192E, 0xFFFFFFFF); /* HIMR */ rtw_write32(Adapter, REG_HIMR0_8192E, pHalData->IntrMask[0] & 0xFFFFFFFF); rtw_write32(Adapter, REG_HIMR1_8192E, pHalData->IntrMask[1] & 0xFFFFFFFF); } static VOID _InitQueueReservedPage_8192EUsb( IN PADAPTER Adapter ) { _InitQueueReservedPage_8192E(Adapter); } static VOID _InitHardwareDropIncorrectBulkOut_8192E( IN PADAPTER Adapter ) { #ifdef ENABLE_USB_DROP_INCORRECT_OUT u32 value32 = rtw_read32(Adapter, REG_TXDMA_OFFSET_CHK); value32 |= DROP_DATA_EN; rtw_write32(Adapter, REG_TXDMA_OFFSET_CHK, value32); #endif } #ifdef CONFIG_RTW_LED static void _InitHWLed(PADAPTER Adapter) { struct led_priv *pledpriv = adapter_to_led(Adapter); if (pledpriv->LedStrategy != HW_LED) return; rtw_write8(Adapter, REG_LEDCFG1, 0x02); /* HW led control * to do .... * must consider cases of antenna diversity/ commbo card/solo card/mini card */ } #endif /* CONFIG_RTW_LED */ static VOID _init_UsbBusSetting_8192EU( IN PADAPTER Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u8 usb_bus_setting = 0; usb_bus_setting = rtw_read8(Adapter, REG_RXDMA_8192E); usb_bus_setting = usb_bus_setting | BIT_DMA_MODE; usb_bus_setting = usb_bus_setting | BIT(3) | BIT(2); /* Burst number in dma mode,DD suggest 0x11 */ /* IS_SUPER_SPEED_USB(Adapter) */ /* for USB 3.0 */ if (IS_HIGH_SPEED_USB(Adapter)) rtw_write8(Adapter, REG_RXDMA_8192E, ((usb_bus_setting | BIT(4)) & (~BIT(5)))); else if (IS_FULL_SPEED_USB(Adapter)) rtw_write8(Adapter, REG_RXDMA_8192E, ((usb_bus_setting | BIT(5)) & (~BIT(4)))); } /*----------------------------------------------------------------------------- * Function: usb_AggSettingTxUpdate() * * Overview: Seperate TX/RX parameters update independent for TP detection and * dynamic TX/RX aggreagtion parameters update. * * Input: PADAPTER * * Output/Return: NONE * * Revised History: * When Who Remark * 12/10/2010 MHC Seperate to smaller function. * *---------------------------------------------------------------------------*/ static VOID usb_AggSettingTxUpdate_8192EU( IN PADAPTER Adapter ) { #ifdef CONFIG_USB_TX_AGGREGATION HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u32 value32; if (Adapter->registrypriv.wifi_spec) pHalData->UsbTxAggMode = _FALSE; if (pHalData->UsbTxAggMode) { value32 = rtw_read32(Adapter, REG_DWBCN0_CTRL_8192E); value32 = value32 & ~(BLK_DESC_NUM_MASK << BLK_DESC_NUM_SHIFT); value32 |= ((pHalData->UsbTxAggDescNum & BLK_DESC_NUM_MASK) << BLK_DESC_NUM_SHIFT); rtw_write32(Adapter, REG_DWBCN0_CTRL_8192E, value32); rtw_write8(Adapter, REG_DWBCN1_CTRL_8192E, pHalData->UsbTxAggDescNum << 1); } #endif } /* usb_AggSettingTxUpdate */ /*----------------------------------------------------------------------------- * Function: usb_AggSettingRxUpdate() * * Overview: Seperate TX/RX parameters update independent for TP detection and * dynamic TX/RX aggreagtion parameters update. * * Input: PADAPTER * * Output/Return: NONE * * Revised History: * When Who Remark * 12/10/2010 MHC Seperate to smaller function. * *---------------------------------------------------------------------------*/ static VOID usb_AggSettingRxUpdate_8192EU( IN PADAPTER Adapter ) { #ifdef CONFIG_USB_RX_AGGREGATION HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u8 usb_agg_setting; u32 usb_agg_th = 0; usb_agg_setting = rtw_read8(Adapter, REG_TRXDMA_CTRL); rtw_write8(Adapter, REG_TRXDMA_CTRL, usb_agg_setting | RXDMA_AGG_EN); switch (pHalData->rxagg_mode) { case RX_AGG_DMA: usb_agg_th = (pHalData->rxagg_dma_size & 0x0F) | (pHalData->rxagg_dma_timeout << 8); usb_agg_th |= BIT_USB_RXDMA_AGG_EN; break; case RX_AGG_USB: case RX_AGG_MIX: usb_agg_th = (pHalData->rxagg_usb_size & 0x0F) | (pHalData->rxagg_usb_timeout << 8); break; case RX_AGG_DISABLE: default: /* TODO: */ break; } rtw_write32(Adapter, REG_RXDMA_AGG_PG_TH, usb_agg_th); /*2010/12/10 MH Add for USB agg mode dynamic switch.*/ pHalData->UsbRxHighSpeedMode = _FALSE; #endif } /* usb_AggSettingRxUpdate */ static VOID _init_UsbAggregationSetting_8192EU( IN PADAPTER Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); /* Tx aggregation setting */ usb_AggSettingTxUpdate_8192EU(Adapter); /* Rx aggregation setting */ usb_AggSettingRxUpdate_8192EU(Adapter); } /*----------------------------------------------------------------------------- * Function: USB_AggModeSwitch() * * Overview: When RX traffic is more than 40M, we need to adjust some parameters to increase * RX speed by increasing batch indication size. This will decrease TCP ACK speed, we * need to monitor the influence of FTP/network share. * For TX mode, we are still ubder investigation. * * Input: PADAPTER * * Output: NONE * * Return: NONE * * Revised History: * When Who Remark * 12/10/2010 MHC Create Version 0. * *---------------------------------------------------------------------------*/ VOID USB_AggModeSwitch( IN PADAPTER Adapter ) { #if 0 HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); /* pHalData->UsbRxHighSpeedMode = FALSE; */ /* How to measure the RX speed? We assume that when traffic is more than */ if (pMgntInfo->bRegAggDMEnable == FALSE) { return; /* Inf not support. */ } if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == TRUE && pHalData->UsbRxHighSpeedMode == FALSE) { pHalData->UsbRxHighSpeedMode = TRUE; } else if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == FALSE && pHalData->UsbRxHighSpeedMode == TRUE) { pHalData->UsbRxHighSpeedMode = FALSE; } else return; #if USB_RX_AGGREGATION_92C if (pHalData->UsbRxHighSpeedMode == TRUE) { /* 2010/12/10 MH The parameter is tested by SD1 engineer and SD3 channel emulator. */ /* USB mode */ #if (RT_PLATFORM == PLATFORM_LINUX) if (pMgntInfo->LinkDetectInfo.bTxBusyTraffic) { pHalData->RxAggBlockCount = 16; pHalData->RxAggBlockTimeout = 7; } else #endif { pHalData->RxAggBlockCount = 40; pHalData->RxAggBlockTimeout = 5; } /* Mix mode */ pHalData->RxAggPageCount = 72; pHalData->RxAggPageTimeout = 6; } else { /* USB mode */ pHalData->RxAggBlockCount = pMgntInfo->RegRxAggBlockCount; pHalData->RxAggBlockTimeout = pMgntInfo->RegRxAggBlockTimeout; /* Mix mode */ pHalData->RxAggPageCount = pMgntInfo->RegRxAggPageCount; pHalData->RxAggPageTimeout = pMgntInfo->RegRxAggPageTimeout; } if (pHalData->RxAggBlockCount > MAX_RX_AGG_BLKCNT) pHalData->RxAggBlockCount = MAX_RX_AGG_BLKCNT; #if (OS_WIN_FROM_VISTA(OS_VERSION)) || (RT_PLATFORM == PLATFORM_LINUX) /* do not support WINXP to prevent usbehci.sys BSOD */ if (IS_WIRELESS_MODE_N_24G(Adapter) || IS_WIRELESS_MODE_N_5G(Adapter)) { /* */ /* 2010/12/24 MH According to V1012 QC IOT test, XP BSOD happen when running chariot test */ /* with the aggregation dynamic change!! We need to disable the function to prevent it is broken */ /* in usbehci.sys. */ /* */ usb_AggSettingRxUpdate_8188E(Adapter); /* 2010/12/27 MH According to designer's suggstion, we can only modify Timeout value. Otheriwse */ /* there might many HW incorrect behavior, the XP BSOD at usbehci.sys may be relative to the */ /* issue. Base on the newest test, we can not enable block cnt > 30, otherwise XP usbehci.sys may */ /* BSOD. */ } #endif #endif #endif } /* USB_AggModeSwitch */ enum { Antenna_Lfet = 1, Antenna_Right = 2, }; #if 0 /*----------------------------------------------------------------------------- * Function: HwSuspendModeEnable92Cu() * * Overview: HW suspend mode switch. * * Input: NONE * * Output: NONE * * Return: NONE * * Revised History: * When Who Remark * 08/23/2010 MHC HW suspend mode switch test.. *---------------------------------------------------------------------------*/ static VOID HwSuspendModeEnable_8192EU( IN PADAPTER pAdapter, IN u8 Type ) { /* PRT_USB_DEVICE pDevice = GET_RT_USB_DEVICE(pAdapter); */ u16 reg = rtw_read16(pAdapter, REG_GPIO_MUXCFG); /* if (!pDevice->RegUsbSS) */ { return; } /* */ /* 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW */ /* to enter suspend mode automatically. Otherwise, it will shut down major power */ /* domain and 8051 will stop. When we try to enter selective suspend mode, we */ /* need to prevent HW to enter D2 mode aumotmatically. Another way, Host will */ /* issue a S10 signal to power domain. Then it will cleat SIC setting(from Yngli). */ /* We need to enable HW suspend mode when enter S3/S4 or disable. We need */ /* to disable HW suspend mode for IPS/radio_off. */ /* */ if (Type == _FALSE) { reg |= BIT14; rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg); reg |= BIT12; rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg); } else { reg &= (~BIT12); rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg); reg &= (~BIT14); rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg); } } /* HwSuspendModeEnable92Cu */ #endif rt_rf_power_state RfOnOffDetect(IN PADAPTER pAdapter) { struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(pAdapter); HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); u8 val8; rt_rf_power_state rfpowerstate = rf_off; if (pwrctl->bHWPowerdown) { val8 = rtw_read8(pAdapter, REG_HSISR); RTW_INFO("pwrdown, 0x5c(BIT7)=%02x\n", val8); rfpowerstate = (val8 & BIT7) ? rf_off : rf_on; } else { /* rf on/off */ rtw_write8(pAdapter, REG_MAC_PINMUX_CFG, rtw_read8(pAdapter, REG_MAC_PINMUX_CFG) & ~(BIT3)); val8 = rtw_read8(pAdapter, REG_GPIO_IO_SEL); RTW_INFO("GPIO_IN=%02x\n", val8); rfpowerstate = (val8 & BIT3) ? rf_on : rf_off; } return rfpowerstate; } /* HalDetectPwrDownMode */ void _ps_open_RF(_adapter *padapter) { /* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified */ /* phy_SsPwrSwitch92CU(padapter, rf_on, 1); */ } void _ps_close_RF(_adapter *padapter) { /* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified */ /* phy_SsPwrSwitch92CU(padapter, rf_off, 1); */ } /* page added for usb2 phy reg access. 20120514 */ VOID WriteUSB2PHYReg_8192EU(PADAPTER Adapter, u8 Offset, u8 Value) { Offset -= 0x20; rtw_write8(Adapter, 0xFE41, Value); rtw_write8(Adapter, 0xFE40, Offset); rtw_write8(Adapter, 0xFE42, 0x81); } u1Byte ReadUSB2PHYReg_8192EU(PADAPTER Adapter, u8 Offset) { u8 value; rtw_write8(Adapter, 0xFE40, Offset); rtw_write8(Adapter, 0xFE42, 0x81); value = rtw_read8(Adapter, 0xFE43); return value; } u32 rtl8192eu_hal_init(PADAPTER Adapter) { u8 value8 = 0; u16 value16; u8 txpktbuf_bndy; u32 status = _SUCCESS; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct pwrctrl_priv *pwrctrlpriv = adapter_to_pwrctl(Adapter); struct registry_priv *pregistrypriv = &Adapter->registrypriv; rt_rf_power_state eRfPowerStateToSet; systime init_start_time = rtw_get_current_time(); #ifdef DBG_HAL_INIT_PROFILING enum HAL_INIT_STAGES { HAL_INIT_STAGES_BEGIN = 0, HAL_INIT_STAGES_INIT_PW_ON, HAL_INIT_STAGES_MISC01, HAL_INIT_STAGES_DOWNLOAD_FW, HAL_INIT_STAGES_MAC, HAL_INIT_STAGES_BB, HAL_INIT_STAGES_RF, HAL_INIT_STAGES_EFUSE_PATCH, HAL_INIT_STAGES_INIT_LLTT, HAL_INIT_STAGES_MISC02, HAL_INIT_STAGES_TURN_ON_BLOCK, HAL_INIT_STAGES_INIT_SECURITY, HAL_INIT_STAGES_MISC11, HAL_INIT_STAGES_INIT_HAL_DM, /* HAL_INIT_STAGES_RF_PS, */ HAL_INIT_STAGES_IQK, HAL_INIT_STAGES_PW_TRACK, HAL_INIT_STAGES_LCK, HAL_INIT_STAGES_MISC21, /* HAL_INIT_STAGES_INIT_PABIAS, */ #ifdef CONFIG_BT_COEXIST HAL_INIT_STAGES_BT_COEXIST, #endif /* HAL_INIT_STAGES_ANTENNA_SEL, */ HAL_INIT_STAGES_MISC31, HAL_INIT_STAGES_END, HAL_INIT_STAGES_NUM }; char *hal_init_stages_str[] = { "HAL_INIT_STAGES_BEGIN", "HAL_INIT_STAGES_INIT_PW_ON", "HAL_INIT_STAGES_MISC01", "HAL_INIT_STAGES_DOWNLOAD_FW", "HAL_INIT_STAGES_MAC", "HAL_INIT_STAGES_BB", "HAL_INIT_STAGES_RF", "HAL_INIT_STAGES_EFUSE_PATCH", "HAL_INIT_STAGES_INIT_LLTT", "HAL_INIT_STAGES_MISC02", "HAL_INIT_STAGES_TURN_ON_BLOCK", "HAL_INIT_STAGES_INIT_SECURITY", "HAL_INIT_STAGES_MISC11", "HAL_INIT_STAGES_INIT_HAL_DM", /* "HAL_INIT_STAGES_RF_PS", */ "HAL_INIT_STAGES_IQK", "HAL_INIT_STAGES_PW_TRACK", "HAL_INIT_STAGES_LCK", "HAL_INIT_STAGES_MISC21", #ifdef CONFIG_BT_COEXIST "HAL_INIT_STAGES_BT_COEXIST", #endif /* "HAL_INIT_STAGES_ANTENNA_SEL", */ "HAL_INIT_STAGES_MISC31", "HAL_INIT_STAGES_END", }; int hal_init_profiling_i; systime hal_init_stages_timestamp[HAL_INIT_STAGES_NUM]; /* used to record the time of each stage's starting point */ for (hal_init_profiling_i = 0; hal_init_profiling_i < HAL_INIT_STAGES_NUM; hal_init_profiling_i++) hal_init_stages_timestamp[hal_init_profiling_i] = 0; #define HAL_INIT_PROFILE_TAG(stage) do { hal_init_stages_timestamp[(stage)] = rtw_get_current_time(); } while (0) #else #define HAL_INIT_PROFILE_TAG(stage) do {} while (0) #endif /* DBG_HAL_INIT_PROFILING */ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BEGIN); /* if(0) { WriteUSB2PHYReg_8192EU(Adapter, 0xE1, ReadUSB2PHYReg_8192EU(Adapter, 0xE1)&0x7f); WriteUSB2PHYReg_8192EU(Adapter, 0xE2, ReadUSB2PHYReg_8192EU(Adapter, 0xE2)&0x0f); delay_us(50); WriteUSB2PHYReg_8192EU(Adapter, 0xE1, ReadUSB2PHYReg_8192EU(Adapter, 0xE1)|0x80); WriteUSB2PHYReg_8192EU(Adapter, 0xE2, ReadUSB2PHYReg_8192EU(Adapter, 0xE1)|0x90); } */ #ifdef CONFIG_WOWLAN pwrctrlpriv->wowlan_wake_reason = rtw_read8(Adapter, REG_WOWLAN_WAKE_REASON); RTW_INFO("%s wowlan_wake_reason: 0x%02x\n", __func__, pwrctrlpriv->wowlan_wake_reason); if (rtw_read8(Adapter, REG_MCUFWDL) & BIT7) { /*&& (pwrctrlpriv->wowlan_wake_reason & FW_DECISION_DISCONNECT)) {*/ u8 reg_val = 0; RTW_INFO("+Reset Entry+\n"); rtw_write8(Adapter, REG_MCUFWDL, 0x00); _8051Reset8192E(Adapter); /* reset BB */ reg_val = rtw_read8(Adapter, REG_SYS_FUNC_EN); reg_val &= ~(BIT(0) | BIT(1)); rtw_write8(Adapter, REG_SYS_FUNC_EN, reg_val); /* reset RF */ rtw_write8(Adapter, REG_RF_CTRL, 0); /* reset TRX path */ rtw_write16(Adapter, REG_CR, 0); /* reset MAC, Digital Core */ reg_val = rtw_read8(Adapter, REG_SYS_FUNC_EN + 1); reg_val &= ~(BIT(4) | BIT(7)); rtw_write8(Adapter, REG_SYS_FUNC_EN + 1, reg_val); reg_val = rtw_read8(Adapter, REG_SYS_FUNC_EN + 1); reg_val |= BIT(4) | BIT(7); rtw_write8(Adapter, REG_SYS_FUNC_EN + 1, reg_val); RTW_INFO("-Reset Entry-\n"); } #endif /* CONFIG_WOWLAN */ if (pwrctrlpriv->bkeepfwalive) { _ps_open_RF(Adapter); if (pHalData->bIQKInitialized) { /* PHY_IQCalibrate(padapter, _TRUE); */ } else { /* PHY_IQCalibrate(padapter, _FALSE); */ pHalData->bIQKInitialized = _TRUE; } /* dm_check_txpowertracking(padapter); * phy_lc_calibrate(padapter); */ odm_txpowertracking_check(&pHalData->odmpriv); /* phy_lc_calibrate_8188e(Adapter); */ goto exit; } HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON); status = rtw_hal_power_on(Adapter); if (status == _FAIL) { goto exit; } txpktbuf_bndy = TX_PAGE_BOUNDARY_8192E; HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC01); _InitQueueReservedPage_8192EUsb(Adapter); _InitQueuePriority_8192E(Adapter); _InitPageBoundary_8192E(Adapter); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_DOWNLOAD_FW); if (Adapter->registrypriv.mp_mode == 0) { status = FirmwareDownload8192E(Adapter, _FALSE); if (status != _SUCCESS) { RTW_INFO("%s: Download Firmware failed!!\n", __FUNCTION__); pHalData->bFWReady = _FALSE; pHalData->fw_ractrl = _FALSE; return status; } else { pHalData->bFWReady = _TRUE; pHalData->fw_ractrl = _TRUE; } } if (pwrctrlpriv->reg_rfoff == _TRUE) pwrctrlpriv->rf_pwrstate = rf_off; /* Save target channel */ pHalData->current_channel = 6;/* default set to 6 */ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MAC); #if (HAL_MAC_ENABLE == 1) status = PHY_MACConfig8192E(Adapter); if (status == _FAIL) goto exit; #endif HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BB); #if (HAL_BB_ENABLE == 1) status = PHY_BBConfig8192E(Adapter); if (status == _FAIL) goto exit; #endif HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_RF); #if (HAL_RF_ENABLE == 1) status = PHY_RFConfig8192E(Adapter); if (status == _FAIL) goto exit; HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_EFUSE_PATCH); _InitTxBufferBoundary_8192E(Adapter, txpktbuf_bndy); status = InitLLTTable8192E(Adapter, txpktbuf_bndy); if (status == _FAIL) { goto exit; } _InitHardwareDropIncorrectBulkOut_8192E(Adapter); if (pHalData->bRDGEnable) _InitRDGSetting_8192E(Adapter); #ifdef CONFIG_TX_EARLY_MODE if (pHalData->AMPDUBurstMode) { value8 = rtw_read8(Adapter, REG_EARLY_MODE_CONTROL_8192E); #if RTL8192E_EARLY_MODE_PKT_NUM_10 == 1 value8 = value8 | 0x1f; #else value8 = value8 | 0xf; #endif rtw_write8(Adapter, REG_EARLY_MODE_CONTROL_8192E, value8); rtw_write8(Adapter, REG_EARLY_MODE_CONTROL_8192E+3, 0x80); value8 = rtw_read8(Adapter, REG_TCR + 1); value8 = value8 | 0x40; rtw_write8(Adapter, REG_TCR + 1, value8); } else { /* rtw_write8(Adapter, REG_EARLY_MODE_CONTROL, 0); */ } #endif /* CONFIG_TX_EARLY_MODE */ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02); /* Get Rx PHY status in order to report RSSI and others. */ _InitDriverInfoSize_8192E(Adapter, DRVINFO_SZ); _InitInterrupt_8192EU(Adapter); _InitNetworkType_8192E(Adapter);/* set msr */ _InitWMACSetting_8192E(Adapter); _InitAdaptiveCtrl_8192E(Adapter); _InitEDCA_8192E(Adapter); _InitRetryFunction_8192E(Adapter); _init_UsbBusSetting_8192EU(Adapter); _init_UsbAggregationSetting_8192EU(Adapter); _InitBeaconParameters_8192E(Adapter); _InitBeaconMaxError_8192E(Adapter, _TRUE); _InitBurstPktLen_8192EU(Adapter); /* added by page. 20110919 */ /* */ /* Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch */ /* Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E. */ /* 2011.08.05. by tynli. */ /* */ value8 = rtw_read8(Adapter, REG_CR); rtw_write8(Adapter, REG_CR, (value8 | MACTXEN | MACRXEN)); #ifdef CONFIG_CHECK_AC_LIFETIME /* Enable lifetime check for the four ACs */ rtw_write8(Adapter, REG_LIFETIME_CTRL, rtw_read8(Adapter, REG_LIFETIME_CTRL) | 0x0f); #endif /* CONFIG_CHECK_AC_LIFETIME */ #if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_TX_MCAST2UNI) #ifdef CONFIG_TX_MCAST2UNI rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */ rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */ #else /* CONFIG_TX_MCAST2UNI */ rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x3000); /* unit: 256us. 3s */ rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x3000); /* unit: 256us. 3s */ #endif /* CONFIG_TX_MCAST2UNI */ #endif /* CONFIG_CONCURRENT_MODE || CONFIG_TX_MCAST2UNI */ #ifdef CONFIG_RTW_LED _InitHWLed(Adapter); #endif /* CONFIG_RTW_LED */ _BBTurnOnBlock_8192E(Adapter); #endif /* */ /* Joseph Note: Keep RfRegChnlVal for later use. */ /* */ pHalData->RfRegChnlVal[0] = phy_query_rf_reg(Adapter, 0, RF_CHNLBW, bRFRegOffsetMask); pHalData->RfRegChnlVal[1] = phy_query_rf_reg(Adapter, 1, RF_CHNLBW, bRFRegOffsetMask); rtw_hal_set_chnl_bw(Adapter, Adapter->registrypriv.channel, CHANNEL_WIDTH_20, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HAL_PRIME_CHNL_OFFSET_DONT_CARE); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_TURN_ON_BLOCK); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_SECURITY); invalidate_cam_all(Adapter); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11); /* HW SEQ CTRL */ /* set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM. */ rtw_write8(Adapter, REG_HWSEQ_CTRL, 0xFF); /* */ /* Disable BAR, suggested by Scott */ /* 2010.04.09 add by hpfan */ /* */ rtw_write32(Adapter, REG_BAR_MODE_CTRL, 0x0201ffff); PHY_SetRFEReg_8192E(Adapter); if (pregistrypriv->wifi_spec) { rtw_write16(Adapter, REG_FAST_EDCA_CTRL , 0); /* Nav limit , suggest by SD1-Pisa,disable NAV_UPPER function when wifi_spec=1 for Test item: 5.2.3 */ rtw_write8(Adapter, REG_NAV_UPPER, 0x0); } HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM); rtl8192e_InitHalDm(Adapter); #if (MP_DRIVER == 1) if (Adapter->registrypriv.mp_mode == 1) { Adapter->mppriv.channel = pHalData->current_channel; MPT_InitializeAdapter(Adapter, Adapter->mppriv.channel); } else #endif /* #if (MP_DRIVER == 1) */ { /* */ /* 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status */ /* and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not */ /* call init_adapter. May cause some problem?? */ /* */ /* Fix the bug that Hw/Sw radio off before S3/S4, the RF off action will not be executed */ /* in MgntActSet_RF_State() after wake up, because the value of pHalData->eRFPowerState */ /* is the same as eRfOff, we should change it to eRfOn after we config RF parameters. */ /* Added by tynli. 2010.03.30. */ pwrctrlpriv->rf_pwrstate = rf_on; /* 0x4c6[3] 1: RTS BW = Data BW */ /* 0: RTS BW depends on CCA / secondary CCA result. */ rtw_write8(Adapter, REG_QUEUE_CTRL, rtw_read8(Adapter, REG_QUEUE_CTRL) & 0xF7); /* enable Tx report. */ /* rtw_write8(Adapter, REG_FWHW_TXQ_CTRL+1, 0x0F); */ /* Suggested by SD1 pisa. Added by tynli. 2011.10.21. */ /* rtw_write8(Adapter, REG_EARLY_MODE_CONTROL_8192E+3, 0x01); */ /* Pretx_en, for WEP/TKIP SEC */ /* tynli_test_tx_report. */ /* rtw_write16(Adapter, REG_TX_RPT_TIME, 0x3DF0); */ /* Reset USB mode switch setting */ rtw_write8(Adapter, REG_ACLK_MON, 0x0); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_IQK); if (pwrctrlpriv->rf_pwrstate == rf_on) { pHalData->neediqk_24g = _TRUE; HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_PW_TRACK); odm_txpowertracking_check(&pHalData->odmpriv); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK); /* phy_lc_calibrate_8192e((GET_HAL_DATA(Adapter)->odmpriv)); */ } } #ifdef CONFIG_HIGH_CHAN_SUPER_CALIBRATION rtw_hal_set_chnl_bw(Adapter, 13, CHANNEL_WIDTH_20, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HAL_PRIME_CHNL_OFFSET_DONT_CARE); PHY_SpurCalibration_8192E(Adapter); rtw_hal_set_chnl_bw(Adapter, Adapter->registrypriv.channel, CHANNEL_WIDTH_20, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HAL_PRIME_CHNL_OFFSET_DONT_CARE); #endif HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC21); /* HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS); * _InitPABias(Adapter); */ #ifdef CONFIG_BT_COEXIST HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BT_COEXIST); if (pHalData->EEPROMBluetoothCoexist == 1) { /* YiWei 20140624 , Fix 8192eu mailbox BT info no response issue reduce I2C clock rate to 156KHz (default 1.25Mhz) */ rtw_write8(Adapter, rPMAC_TxPacketNum, rtw_read8(Adapter, rPMAC_TxPacketNum) | 0x7); /* Init BT hw config.*/ rtw_btcoex_HAL_Initialize(Adapter, _FALSE); } #if 0 /* else */ { /* In combo card run wifi only , must setting some hardware reg. */ rtl8192e_combo_card_WifiOnlyHwInit(Adapter); } #endif #endif /* 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW enter */ /* suspend mode automatically. */ /* HwSuspendModeEnable92Cu(Adapter, _FALSE); */ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC31); rtw_write8(Adapter, REG_USB_HRPWM, 0); #ifdef CONFIG_XMIT_ACK /* ack for xmit mgmt frames. */ rtw_write32(Adapter, REG_FWHW_TXQ_CTRL, rtw_read32(Adapter, REG_FWHW_TXQ_CTRL) | BIT(12)); #endif /* CONFIG_XMIT_ACK */ /* Fixed LDPC rx hang issue. */ { u4Byte tmp4Byte = PlatformEFIORead4Byte(Adapter, REG_SYS_SWR_CTRL1_8192E); PlatformEFIOWrite1Byte(Adapter, REG_SYS_SWR_CTRL2_8192E, 0x75); tmp4Byte = (tmp4Byte & 0xfff00fff) | (0x7E << 12); PlatformEFIOWrite4Byte(Adapter, REG_SYS_SWR_CTRL1_8192E, tmp4Byte); } exit: HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END); RTW_INFO("%s in %dms\n", __FUNCTION__, rtw_get_passing_time_ms(init_start_time)); #ifdef DBG_HAL_INIT_PROFILING hal_init_stages_timestamp[HAL_INIT_STAGES_END] = rtw_get_current_time(); for (hal_init_profiling_i = 0; hal_init_profiling_i < HAL_INIT_STAGES_NUM - 1; hal_init_profiling_i++) { RTW_INFO("DBG_HAL_INIT_PROFILING: %35s, %u, %5u, %5u\n" , hal_init_stages_str[hal_init_profiling_i] , hal_init_stages_timestamp[hal_init_profiling_i] , (hal_init_stages_timestamp[hal_init_profiling_i + 1] - hal_init_stages_timestamp[hal_init_profiling_i]) , rtw_get_time_interval_ms(hal_init_stages_timestamp[hal_init_profiling_i], hal_init_stages_timestamp[hal_init_profiling_i + 1]) ); } #endif return status; } VOID hal_poweroff_8192eu( IN PADAPTER Adapter ) { u8 u1bTmp; u8 bMacPwrCtrlOn = _FALSE; rtw_hal_get_hwreg(Adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn); if (bMacPwrCtrlOn == _FALSE) return ; RTW_INFO(" %s\n", __FUNCTION__); /* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */ u1bTmp = rtw_read8(Adapter, REG_TX_RPT_CTRL); rtw_write8(Adapter, REG_TX_RPT_CTRL, u1bTmp & (~BIT1)); /* stop rx */ rtw_write8(Adapter, REG_CR, 0x0); HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8192E_NIC_LPS_ENTER_FLOW); /* MCUFWDL 0x80[1:0]=0 */ /* reset MCU ready status */ rtw_write8(Adapter, REG_MCUFWDL, 0x00); #if 0 if ((rtw_read8(Adapter, REG_MCUFWDL) & RAM_DL_SEL) && GET_HAL_DATA(Adapter)->bFWReady) /* 8051 RAM code */ _8051Reset8192E(Adapter); #else /* Reset MCU IO Wrapper */ u1bTmp = rtw_read8(Adapter, REG_RSV_CTRL + 1); rtw_write8(Adapter, REG_RSV_CTRL + 1, (u1bTmp & (~BIT0))); /* Reset MCU. Suggested by Filen. 2011.01.26. by tynli. */ u1bTmp = rtw_read8(Adapter, REG_SYS_FUNC_EN + 1); rtw_write8(Adapter, REG_SYS_FUNC_EN + 1, (u1bTmp & (~BIT2))); /* Enable MCU IO Wrapper , for IPS flow */ u1bTmp = rtw_read8(Adapter, REG_RSV_CTRL + 1); rtw_write8(Adapter, REG_RSV_CTRL + 1, u1bTmp | BIT0); #endif /* Card disable power action flow */ HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8192E_NIC_DISABLE_FLOW); bMacPwrCtrlOn = _FALSE; rtw_hal_set_hwreg(Adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn); GET_HAL_DATA(Adapter)->bFWReady = _FALSE; } static void rtl8192e_hw_power_down(_adapter *padapter) { /* 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c. */ /* Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1. */ /* Enable register area 0x0-0xc. */ rtw_write8(padapter, REG_RSV_CTRL, 0x0); rtw_write16(padapter, REG_APS_FSMCO, 0x8812); } u32 rtl8192eu_hal_deinit(PADAPTER Adapter) { struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(Adapter); HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); RTW_INFO("==> %s\n", __FUNCTION__); rtw_write16(Adapter, REG_GPIO_MUXCFG, rtw_read16(Adapter, REG_GPIO_MUXCFG) & (~BIT12)); if (pHalData->bSupportUSB3 == _TRUE) { /* set Reg 0xf008[3:4] to 2'11 to eable U1/U2 Mode in USB3.0. added by page, 20120712 */ rtw_write8(Adapter, 0xf008, rtw_read8(Adapter, 0xf008) | 0x18); } rtw_write32(Adapter, REG_HISR0_8192E, 0xFFFFFFFF); rtw_write32(Adapter, REG_HISR1_8192E, 0xFFFFFFFF); rtw_write32(Adapter, REG_HIMR0_8192E, IMR_DISABLED_8192E); rtw_write32(Adapter, REG_HIMR1_8192E, IMR_DISABLED_8192E); #ifdef SUPPORT_HW_RFOFF_DETECTED RTW_INFO("bkeepfwalive(%x)\n", pwrctl->bkeepfwalive); if (pwrctl->bkeepfwalive) { _ps_close_RF(Adapter); if ((pwrctl->bHWPwrPindetect) && (pwrctl->bHWPowerdown)) rtl8192e_hw_power_down(Adapter); } else #endif { if (rtw_is_hw_init_completed(Adapter)) { rtw_hal_power_off(Adapter); if ((pwrctl->bHWPwrPindetect) && (pwrctl->bHWPowerdown)) rtl8192e_hw_power_down(Adapter); } pHalData->bMacPwrCtrlOn = _FALSE; } return _SUCCESS; } unsigned int rtl8192eu_inirp_init(PADAPTER Adapter) { u8 i; struct recv_buf *precvbuf; uint status; struct dvobj_priv *pdev = adapter_to_dvobj(Adapter); struct intf_hdl *pintfhdl = &Adapter->iopriv.intf; struct recv_priv *precvpriv = &(Adapter->recvpriv); u32(*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); #ifdef CONFIG_USB_INTERRUPT_IN_PIPE HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u32(*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr); #endif _read_port = pintfhdl->io_ops._read_port; status = _SUCCESS; precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR; /* issue Rx irp to receive data */ precvbuf = (struct recv_buf *)precvpriv->precv_buf; for (i = 0; i < NR_RECVBUFF; i++) { if (_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == _FALSE) { status = _FAIL; goto exit; } precvbuf++; precvpriv->free_recv_buf_queue_cnt--; } #ifdef CONFIG_USB_INTERRUPT_IN_PIPE if (pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX] != 0x07) { status = _FAIL; RTW_INFO("%s =>Warning !! Have not USB Int-IN pipe, RtIntInPipe(%d)!!!\n", __func__, pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX]); goto exit; } _read_interrupt = pintfhdl->io_ops._read_interrupt; if (_read_interrupt(pintfhdl, RECV_INT_IN_ADDR) == _FALSE) { status = _FAIL; } #endif exit: return status; } unsigned int rtl8192eu_inirp_deinit(PADAPTER Adapter) { rtw_read_port_cancel(Adapter); return _SUCCESS; } /* ------------------------------------------------------------------- * * EEPROM/EFUSE Content Parsing * * ------------------------------------------------------------------- */ VOID hal_ReadIDs_8192EU( IN PADAPTER Adapter, IN pu1Byte PROMContent, IN BOOLEAN AutoloadFail ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); if (!AutoloadFail) { /* VID, PID */ pHalData->EEPROMVID = ReadLE2Byte(&PROMContent[EEPROM_VID_8192EU]); pHalData->EEPROMPID = ReadLE2Byte(&PROMContent[EEPROM_PID_8192EU]); /* Customer ID, 0x00 and 0xff are reserved for Realtek. */ pHalData->EEPROMCustomerID = *(u8 *)&PROMContent[EEPROM_CustomID_8192E]; pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID; } else { pHalData->EEPROMVID = EEPROM_Default_VID; pHalData->EEPROMPID = EEPROM_Default_PID; /* Customer ID, 0x00 and 0xff are reserved for Realtek. */ pHalData->EEPROMCustomerID = EEPROM_Default_CustomerID; pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID; } if ((pHalData->EEPROMVID == 0x050D) && (pHalData->EEPROMPID == 0x1106)) /* SerComm for Belkin. */ pHalData->CustomerID = RT_CID_819x_Sercomm_Belkin; else if ((pHalData->EEPROMVID == 0x0846) && (pHalData->EEPROMPID == 0x9051)) /* SerComm for Netgear. */ pHalData->CustomerID = RT_CID_819x_Sercomm_Netgear; else if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330e)) /* add by ylb 20121012 for customer led for alpha */ pHalData->CustomerID = RT_CID_819x_ALPHA_Dlink; RTW_INFO("VID = 0x%04X, PID = 0x%04X\n", pHalData->EEPROMVID, pHalData->EEPROMPID); RTW_INFO("Customer ID: 0x%02X, SubCustomer ID: 0x%02X\n", pHalData->EEPROMCustomerID, pHalData->EEPROMSubCustomerID); } VOID hal_CustomizedBehavior_8192EU( IN PADAPTER Adapter ) { #ifdef CONFIG_RTW_SW_LED HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct led_priv *pledpriv = adapter_to_led(Adapter); /* Led mode */ switch (pHalData->CustomerID) { case RT_CID_DEFAULT: pledpriv->LedStrategy = SW_LED_MODE1; pledpriv->bRegUseLed = _TRUE; break; case RT_CID_819x_HP: pledpriv->LedStrategy = SW_LED_MODE6; /* Customize Led mode */ break; case RT_CID_819x_Sercomm_Belkin: pledpriv->LedStrategy = SW_LED_MODE9; break; case RT_CID_819x_Sercomm_Netgear: pledpriv->LedStrategy = SW_LED_MODE10; break; case RT_CID_819x_ALPHA_Dlink: /* add by ylb 20121012 for customer led for alpha */ pledpriv->LedStrategy = SW_LED_MODE1; break; default: pledpriv->LedStrategy = SW_LED_MODE9; break; } /* 2010.04.28 for 88CU minicard led control */ /* if(pHalData->InterfaceSel == INTF_SEL2_MINICARD) */ /* { */ /* pHalData->LedStrategy = SW_LED_MODE6; */ /* } */ pHalData->bLedOpenDrain = _TRUE;/* Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */ #endif } static void hal_CustomizeByCustomerID_8192EU( IN PADAPTER padapter ) { #if 0 HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); /* For customized behavior. */ if ((pHalData->EEPROMVID == 0x103C) && (pHalData->EEPROMPID == 0x1629)) /* HP Lite-On for RTL8188CUS Slim Combo. */ pHalData->CustomerID = RT_CID_819x_HP; else if ((pHalData->EEPROMVID == 0x9846) && (pHalData->EEPROMPID == 0x9041)) pHalData->CustomerID = RT_CID_NETGEAR; else if ((pHalData->EEPROMVID == 0x2019) && (pHalData->EEPROMPID == 0x1201)) pHalData->CustomerID = RT_CID_PLANEX; else if ((pHalData->EEPROMVID == 0x0BDA) && (pHalData->EEPROMPID == 0x5088)) pHalData->CustomerID = RT_CID_CC_C; RTW_INFO("PID= 0x%x, VID= %x\n", pHalData->EEPROMPID, pHalData->EEPROMVID); /* Decide CustomerID according to VID/DID or EEPROM */ switch (pHalData->EEPROMCustomerID) { case EEPROM_CID_DEFAULT: if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3308)) pHalData->CustomerID = RT_CID_DLINK; else if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3309)) pHalData->CustomerID = RT_CID_DLINK; else if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330a)) pHalData->CustomerID = RT_CID_DLINK; else if ((pHalData->EEPROMVID == 0x0BFF) && (pHalData->EEPROMPID == 0x8160)) { pHalData->bAutoConnectEnable = _FALSE; pHalData->CustomerID = RT_CID_CHINA_MOBILE; } else if ((pHalData->EEPROMVID == 0x0BDA) && (pHalData->EEPROMPID == 0x5088)) pHalData->CustomerID = RT_CID_CC_C; RTW_INFO("PID= 0x%x, VID= %x\n", pHalData->EEPROMPID, pHalData->EEPROMVID); break; case EEPROM_CID_WHQL: /* padapter->bInHctTest = TRUE; */ /* pMgntInfo->bSupportTurboMode = FALSE; */ /* pMgntInfo->bAutoTurboBy8186 = FALSE; */ /* pMgntInfo->PowerSaveControl.bInactivePs = FALSE; */ /* pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE; */ /* pMgntInfo->PowerSaveControl.bLeisurePs = FALSE; */ /* pMgntInfo->PowerSaveControl.bLeisurePsModeBackup = FALSE; */ /* pMgntInfo->keepAliveLevel = 0; */ /* padapter->bUnloadDriverwhenS3S4 = FALSE; */ break; default: pHalData->CustomerID = RT_CID_DEFAULT; break; } RTW_INFO("MGNT Customer ID: 0x%2x\n", pHalData->CustomerID); hal_CustomizedBehavior_8192EU(padapter); #endif } static VOID ReadLEDSetting_8192EU( IN PADAPTER Adapter, IN u8 *PROMContent, IN BOOLEAN AutoloadFail ) { #ifdef CONFIG_RTW_LED struct led_priv *pledpriv = adapter_to_led(Adapter); HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); #ifdef CONFIG_RTW_SW_LED pledpriv->bRegUseLed = _TRUE; switch (pHalData->CustomerID) { default: pledpriv->LedStrategy = SW_LED_MODE1; break; } pHalData->bLedOpenDrain = _TRUE;/* Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */ #else /* HW LED */ pledpriv->LedStrategy = HW_LED; #endif /* CONFIG_RTW_SW_LED */ #endif } VOID InitAdapterVariablesByPROM_8192EU( IN PADAPTER Adapter ) { PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); hal_InitPGData_8192E(Adapter, pHalData->efuse_eeprom_data); Hal_EfuseParseIDCode8192E(Adapter, pHalData->efuse_eeprom_data); Hal_ReadPROMVersion8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); hal_ReadIDs_8192EU(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); hal_config_macaddr(Adapter, pHalData->bautoload_fail_flag); Hal_ReadPowerSavingMode8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadTxPowerInfo8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadBoardType8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); /* */ /* Read Bluetooth co-exist and initialize */ /* */ Hal_EfuseParseBTCoexistInfo8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadChannelPlan8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_EfuseParseXtal_8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadThermalMeter_8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadAntennaDiversity8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadPAType_8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadAmplifierType_8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadRFEType_8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); hal_CustomizeByCustomerID_8192EU(Adapter); ReadLEDSetting_8192EU(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_EfuseParseKFreeData_8192E(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); /* set coex. ant info once efuse parsing is done */ rtw_btcoex_set_ant_info(Adapter); } static void Hal_ReadPROMContent_8192EU( IN PADAPTER Adapter ) { PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); u8 eeValue; /* check system boot selection */ eeValue = rtw_read8(Adapter, REG_SYS_EEPROM_CTRL); pHalData->EepromOrEfuse = (eeValue & EEPROMSEL) ? _TRUE : _FALSE; pHalData->bautoload_fail_flag = (eeValue & EEPROM_EN) ? _FALSE : _TRUE; RTW_INFO("Boot from %s, Autoload %s !\n", (pHalData->EepromOrEfuse ? "EEPROM" : "EFUSE"), (pHalData->bautoload_fail_flag ? "Fail" : "OK")); /* pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE; */ InitAdapterVariablesByPROM_8192EU(Adapter); } u8 ReadAdapterInfo8192EU( IN PADAPTER Adapter ) { /* Read all content in Efuse/EEPROM. */ Hal_ReadPROMContent_8192EU(Adapter); /* We need to define the RF type after all PROM value is recognized. */ hal_ReadRFType_8192E(Adapter); return _SUCCESS; } void UpdateInterruptMask8192EU(PADAPTER padapter, u8 bHIMR0 , u32 AddMSR, u32 RemoveMSR) { HAL_DATA_TYPE *pHalData; u32 *himr; pHalData = GET_HAL_DATA(padapter); if (bHIMR0) himr = &(pHalData->IntrMask[0]); else himr = &(pHalData->IntrMask[1]); if (AddMSR) *himr |= AddMSR; if (RemoveMSR) *himr &= (~RemoveMSR); if (bHIMR0) rtw_write32(padapter, REG_HIMR0_8192E, *himr); else rtw_write32(padapter, REG_HIMR1_8192E, *himr); } u8 SetHwReg8192EU(PADAPTER Adapter, u8 variable, u8 *val) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(Adapter); u8 ret = _SUCCESS; switch (variable) { case HW_VAR_RXDMA_AGG_PG_TH: #ifdef CONFIG_USB_RX_AGGREGATION { /* threshold == 1 , Disable Rx-agg when AP is B/G mode or wifi_spec=1 to prevent bad TP. */ u8 threshold = *((u8 *)val); if (threshold == 0) { switch (pHalData->rxagg_mode) { case RX_AGG_DMA: threshold = (pHalData->rxagg_dma_size & 0x0F); break; case RX_AGG_USB: case RX_AGG_MIX: threshold = (pHalData->rxagg_usb_size & 0x0F); break; case RX_AGG_DISABLE: default: break; } } rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold); #ifdef CONFIG_80211N_HT { /* 2014-07-24 Fix WIFI Logo -5.2.4/5.2.9 - DT3 low TP issue */ /* Adjust RxAggrTimeout to close to zero disable RxAggr for RxAgg-USB mode, suggested by designer */ /* Timeout value is calculated by 34 / (2^n) */ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; struct ht_priv *phtpriv = &pmlmepriv->htpriv; if (pHalData->rxagg_mode == RX_AGG_USB) { #if 1 /* BG mode || (wifi_spec=1 && BG mode Testbed) */ if ((threshold == 1) && (_FALSE == phtpriv->ht_option)) #else /* (wifi_spec=1 && BG mode Testbed) */ if ((Adapter->registrypriv.wifi_spec == 1) && (_FALSE == phtpriv->ht_option)) #endif rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH + 1, 0); else rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH + 1, pHalData->rxagg_usb_timeout); } } #endif/* #ifdef CONFIG_80211N_HT */ } #endif break; case HW_VAR_SET_RPWM: #ifdef CONFIG_LPS_LCLK { u8 ps_state = *((u8 *)val); /* rpwm value only use BIT0(clock bit) ,BIT6(Ack bit), and BIT7(Toggle bit) for 88e. */ /* BIT0 value - 1: 32k, 0:40MHz. */ /* BIT6 value - 1: report cpwm value after success set, 0:do not report. */ /* BIT7 value - Toggle bit change. */ /* modify by Thomas. 2012/4/2. */ ps_state = ps_state & 0xC1; /* RTW_INFO("##### Change RPWM value to = %x for switch clk #####\n",ps_state); */ rtw_write8(Adapter, REG_USB_HRPWM, ps_state); } #endif #ifdef CONFIG_AP_WOWLAN if (pwrctl->wowlan_ap_mode == _TRUE) { u8 ps_state = *((u8 *)val); RTW_INFO("%s, RPWM\n", __func__); /* rpwm value only use BIT0(clock bit) ,BIT6(Ack bit), and BIT7(Toggle bit) for 88e. */ /* BIT0 value - 1: 32k, 0:40MHz. */ /* BIT6 value - 1: report cpwm value after success set, 0:do not report. */ /* BIT7 value - Toggle bit change. */ /* modify by Thomas. 2012/4/2. */ ps_state = ps_state & 0xC1; /* RTW_INFO("##### Change RPWM value to = %x for switch clk #####\n",ps_state); */ rtw_write8(Adapter, REG_USB_HRPWM, ps_state); } #endif break; default: ret = SetHwReg8192E(Adapter, variable, val); break; } return ret; } void GetHwReg8192EU(PADAPTER Adapter, u8 variable, u8 *val) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); switch (variable) { default: GetHwReg8192E(Adapter, variable, val); break; } } u8 GetHalDefVar8192EUsb( IN PADAPTER Adapter, IN HAL_DEF_VARIABLE eVariable, IN PVOID pValue ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u8 bResult = _SUCCESS; switch (eVariable) { case HW_VAR_MAX_RX_AMPDU_FACTOR: *((u32 *)pValue) = MAX_AMPDU_FACTOR_64K; /* MAX_AMPDU_FACTOR_64K; */ break; default: GetHalDefVar8192E(Adapter, eVariable, pValue); break; } return bResult; } /* * Description: * Change default setting of specified variable. * */ u8 SetHalDefVar8192EUsb( IN PADAPTER Adapter, IN HAL_DEF_VARIABLE eVariable, IN PVOID pValue ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u8 bResult = _SUCCESS; switch (eVariable) { default: SetHalDefVar8192E(Adapter, eVariable, pValue); break; } return bResult; } void _update_response_rate(_adapter *padapter, unsigned int mask) { u8 RateIndex = 0; /* Set RRSR rate table. */ rtw_write8(padapter, REG_RRSR, mask & 0xff); rtw_write8(padapter, REG_RRSR + 1, (mask >> 8) & 0xff); /* Set RTS initial rate */ /* We just need to update to pHalData->RTSInitRate which will be set in Tx descriptor. */ } static void rtl8192eu_init_default_value(_adapter *padapter) { rtl8192e_init_default_value(padapter); } static u8 rtl8192eu_ps_func(PADAPTER Adapter, HAL_INTF_PS_FUNC efunc_id, u8 *val) { u8 bResult = _TRUE; switch (efunc_id) { #if defined(CONFIG_AUTOSUSPEND) && defined(SUPPORT_HW_RFOFF_DETECTED) case HAL_USB_SELECT_SUSPEND: { u8 bfwpoll = *((u8 *)val); /* rtl8188e_set_FwSelectSuspend_cmd(Adapter,bfwpoll ,500); */ /* note fw to support hw power down ping detect */ } break; #endif /* CONFIG_AUTOSUSPEND && SUPPORT_HW_RFOFF_DETECTED */ default: break; } return bResult; } void rtl8192eu_set_hal_ops(_adapter *padapter) { struct hal_ops *pHalFunc = &padapter->hal_func; pHalFunc->hal_power_on = _InitPowerOn_8192EU; pHalFunc->hal_power_off = hal_poweroff_8192eu; pHalFunc->hal_init = &rtl8192eu_hal_init; pHalFunc->hal_deinit = &rtl8192eu_hal_deinit; pHalFunc->inirp_init = &rtl8192eu_inirp_init; pHalFunc->inirp_deinit = &rtl8192eu_inirp_deinit; pHalFunc->init_xmit_priv = &rtl8192eu_init_xmit_priv; pHalFunc->free_xmit_priv = &rtl8192eu_free_xmit_priv; pHalFunc->init_recv_priv = &rtl8192eu_init_recv_priv; pHalFunc->free_recv_priv = &rtl8192eu_free_recv_priv; #ifdef CONFIG_RTW_SW_LED pHalFunc->InitSwLeds = &rtl8192eu_InitSwLeds; pHalFunc->DeInitSwLeds = &rtl8192eu_DeInitSwLeds; #endif/* CONFIG_RTW_SW_LED */ pHalFunc->init_default_value = &rtl8192eu_init_default_value; pHalFunc->intf_chip_configure = &rtl8192eu_interface_configure; pHalFunc->read_adapter_info = &ReadAdapterInfo8192EU; pHalFunc->set_hw_reg_handler = &SetHwReg8192EU; pHalFunc->GetHwRegHandler = &GetHwReg8192EU; pHalFunc->get_hal_def_var_handler = &GetHalDefVar8192EUsb; pHalFunc->SetHalDefVarHandler = &SetHalDefVar8192EUsb; pHalFunc->hal_xmit = &rtl8192eu_hal_xmit; pHalFunc->mgnt_xmit = &rtl8192eu_mgnt_xmit; pHalFunc->hal_xmitframe_enqueue = &rtl8192eu_hal_xmitframe_enqueue; #ifdef CONFIG_HOSTAPD_MLME pHalFunc->hostap_mgnt_xmit_entry = &rtl8192eu_hostap_mgnt_xmit_entry; #endif pHalFunc->interface_ps_func = &rtl8192eu_ps_func; #ifdef CONFIG_XMIT_THREAD_MODE pHalFunc->xmit_thread_handler = &rtl8192eu_xmit_buf_handler; #endif #ifdef CONFIG_SUPPORT_USB_INT pHalFunc->interrupt_handler = interrupt_handler_8192eu; #endif rtl8192e_set_hal_ops(pHalFunc); }