rtl8192eu-linux-driver/hal/rtl8192e/rtl8192e_dm.c

/******************************************************************************
 *
 * Copyright(c) 2012 - 2017 Realtek Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 *****************************************************************************/
/* ************************************************************
 * Description:
 *
 * This file is for 92CE/92CU dynamic mechanism only
 *
 *
 * ************************************************************ */
#define _RTL8192E_DM_C_

/* ************************************************************
 * include files
 * ************************************************************
 * #include <drv_types.h> */
#include <rtl8192e_hal.h>

/* ************************************************************
 * Global var
 * ************************************************************ */

#ifdef CONFIG_SUPPORT_HW_WPS_PBC
static void dm_CheckPbcGPIO(_adapter *padapter)
{
	u8	tmp1byte;
	u8	bPbcPressed = _FALSE;

	if (!padapter->registrypriv.hw_wps_pbc)
		return;

#ifdef CONFIG_USB_HCI
	tmp1byte = rtw_read8(padapter, GPIO_IO_SEL);
	tmp1byte |= (HAL_8192EU_HW_GPIO_WPS_BIT);
	rtw_write8(padapter, GPIO_IO_SEL, tmp1byte);	/* enable GPIO[7] as output mode */

	tmp1byte &= ~(HAL_8192EU_HW_GPIO_WPS_BIT);
	rtw_write8(padapter, GPIO_IN, tmp1byte);		/* reset the floating voltage level */

	tmp1byte =  rtw_read8(padapter,  GPIO_IO_SEL);
	tmp1byte &= ~(HAL_8192EU_HW_GPIO_WPS_BIT);
	rtw_write8(padapter, GPIO_IO_SEL, tmp1byte);	/* enable GPIO[7] as input mode */

	tmp1byte = rtw_read8(padapter, GPIO_IN);
	/* RTW_INFO("CheckPbcGPIO - %x\n", tmp1byte); */

	if (tmp1byte == 0xff)
		return ;

	if (tmp1byte & HAL_8192EU_HW_GPIO_WPS_BIT) {
		/* Here we only set bPbcPressed to TRUE */
		/* After trigger PBC, the variable will be set to FALSE */
		bPbcPressed = _TRUE;
		/* RTW_INFO("CheckPbcGPIO - PBC is pressed\n"); */

	}
#endif

	if (_TRUE == bPbcPressed) {
		/* Here we only set bPbcPressed to true */
		/* After trigger PBC, the variable will be set to false */
		RTW_INFO("CheckPbcGPIO - PBC is pressed\n");
		rtw_request_wps_pbc_event(padapter);
	}
}
#endif /* #ifdef CONFIG_SUPPORT_HW_WPS_PBC */

#ifdef CONFIG_PCI_HCI
/*
 *	Description:
 *		Perform interrupt migration dynamically to reduce CPU utilization.
 *
 *	Assumption:
 *		1. Do not enable migration under WIFI test.
 *
 *	Created by Roger, 2010.03.05.
 *   */
VOID
dm_InterruptMigration(
	IN	PADAPTER	Adapter
)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	struct mlme_priv	*pmlmepriv = &(Adapter->mlmepriv);
	BOOLEAN			bCurrentIntMt, bCurrentACIntDisable;
	BOOLEAN			IntMtToSet = _FALSE;
	BOOLEAN			ACIntToSet = _FALSE;


	/* Retrieve current interrupt migration and Tx four ACs IMR settings first. */
	bCurrentIntMt = pHalData->bInterruptMigration;
	bCurrentACIntDisable = pHalData->bDisableTxInt;

	/*  */
	/* <Roger_Notes> Currently we use busy traffic for reference instead of RxIntOK counts to prevent non-linear Rx statistics */
	/* when interrupt migration is set before. 2010.03.05. */
	/*  */
	if (!Adapter->registrypriv.wifi_spec &&
	    (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) &&
	    pmlmepriv->LinkDetectInfo.bHigherBusyTraffic) {
		IntMtToSet = _TRUE;

		/* To check whether we should disable Tx interrupt or not. */
		if (pmlmepriv->LinkDetectInfo.bHigherBusyRxTraffic)
			ACIntToSet = _TRUE;
	}

	/* Update current settings. */
	if (bCurrentIntMt != IntMtToSet) {
		RTW_INFO("%s(): Update interrrupt migration(%d)\n", __FUNCTION__, IntMtToSet);
		if (IntMtToSet) {
			/*  */
			/* <Roger_Notes> Set interrrupt migration timer and corresponging Tx/Rx counter. */
			/* timer 25ns*0xfa0=100us for 0xf packets. */
			/* 2010.03.05. */
			/*  */
			rtw_write32(Adapter, REG_INT_MIG, 0xff000fa0);/* 0x306:Rx, 0x307:Tx */
			pHalData->bInterruptMigration = IntMtToSet;
		} else {
			/* Reset all interrupt migration settings. */
			rtw_write32(Adapter, REG_INT_MIG, 0);
			pHalData->bInterruptMigration = IntMtToSet;
		}
	}

#if 0
	if (bCurrentACIntDisable != ACIntToSet) {
		RTW_INFO("%s(): Update AC interrrupt(%d)\n", __FUNCTION__, ACIntToSet);
		if (ACIntToSet) { /*  Disable four ACs interrupts. */
			/* */
			/*  <Roger_Notes> Disable VO, VI, BE and BK four AC interrupts to gain more efficient CPU utilization. */
			/*  When extremely highly Rx OK occurs, we will disable Tx interrupts. */
			/*  2010.03.05. */
			/* */
			UpdateInterruptMask8192CE(Adapter, 0, RT_AC_INT_MASKS);
			pHalData->bDisableTxInt = ACIntToSet;
		} else { /*  Enable four ACs interrupts. */
			UpdateInterruptMask8192CE(Adapter, RT_AC_INT_MASKS, 0);
			pHalData->bDisableTxInt = ACIntToSet;
		}
	}
#endif

}

#endif

/*
 * Initialize GPIO setting registers
 *   */
static void
dm_InitGPIOSetting(
	IN	PADAPTER	Adapter
)
{
	PHAL_DATA_TYPE		pHalData = GET_HAL_DATA(Adapter);

	u8	tmp1byte;

	tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG);
	tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT);

	rtw_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte);

}

/* ************************************************************
 * functions
 * ************************************************************ */
static void Init_ODM_ComInfo_8192e(PADAPTER	Adapter)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_struct		*pDM_Odm = &(pHalData->odmpriv);
	u8	cut_ver, fab_ver;

	Init_ODM_ComInfo(Adapter);

	odm_cmn_info_init(pDM_Odm, ODM_CMNINFO_FAB_VER, pHalData->version_id.VendorType);

	if (IS_A_CUT(pHalData->version_id))
		cut_ver = ODM_CUT_A;
	else if (IS_B_CUT(pHalData->version_id))
		cut_ver = ODM_CUT_B;
	else if (IS_C_CUT(pHalData->version_id))
		cut_ver = ODM_CUT_C;
	else if (IS_D_CUT(pHalData->version_id))
		cut_ver = ODM_CUT_D;
	else if (IS_E_CUT(pHalData->version_id))
		cut_ver = ODM_CUT_E;
	else
		cut_ver = ODM_CUT_A;
	odm_cmn_info_init(pDM_Odm, ODM_CMNINFO_CUT_VER, cut_ver);
}

void
rtl8192e_InitHalDm(
	IN	PADAPTER	Adapter
)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_struct		*pDM_Odm = &(pHalData->odmpriv);

#ifdef CONFIG_USB_HCI
	dm_InitGPIOSetting(Adapter);
#endif
	rtw_phydm_init(Adapter);
	/* Adapter->fix_rate = 0xFF; */
}


VOID
rtl8192e_HalDmWatchDog(
	IN	PADAPTER	Adapter
)
{
	BOOLEAN		bFwCurrentInPSMode = _FALSE;
	u8 bFwPSAwake = _TRUE;
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_struct		*pDM_Odm = &(pHalData->odmpriv);
	struct pwrctrl_priv *pwrpriv = adapter_to_pwrctl(Adapter);
	u8 in_lps = _FALSE;

	if (!rtw_is_hw_init_completed(Adapter))
		goto skip_dm;

#ifdef CONFIG_LPS
	bFwCurrentInPSMode = pwrpriv->bFwCurrentInPSMode;
	rtw_hal_get_hwreg(Adapter, HW_VAR_FWLPS_RF_ON, &bFwPSAwake);
#endif

#ifdef CONFIG_P2P_PS
	/* Fw is under p2p powersaving mode, driver should stop dynamic mechanism. */
	/* modifed by thomas. 2011.06.11. */
	if (Adapter->wdinfo.p2p_ps_mode)
		bFwPSAwake = _FALSE;
#endif /* CONFIG_P2P_PS */

	if ((rtw_is_hw_init_completed(Adapter))
	    && ((!bFwCurrentInPSMode) && bFwPSAwake)) {

		rtw_hal_check_rxfifo_full(Adapter);
		/*  */
		/* Dynamically switch RTS/CTS protection. */
		/*  */
		/* dm_CheckProtection(Adapter); */

#ifdef CONFIG_PCI_HCI
		/* 20100630 Joseph: Disable Interrupt Migration mechanism temporarily because it degrades Rx throughput. */
		/* Tx Migration settings. */
		/* dm_InterruptMigration(Adapter); */

		/* if(Adapter->HalFunc.TxCheckStuckHandler(Adapter)) */
		/*	PlatformScheduleWorkItem(&(GET_HAL_DATA(Adapter)->HalResetWorkItem)); */
#endif

	}

#ifdef CONFIG_DISABLE_ODM
	goto skip_dm;
#endif

#ifdef CONFIG_LPS
	if (pwrpriv->bLeisurePs && bFwCurrentInPSMode && pwrpriv->pwr_mode != PS_MODE_ACTIVE)
		in_lps = _TRUE;
#endif

	rtw_phydm_watchdog(Adapter, in_lps);

skip_dm:

#ifdef CONFIG_SUPPORT_HW_WPS_PBC
	/* Check GPIO to determine current Pbc status. */
	dm_CheckPbcGPIO(Adapter);
#endif
	return;
}

void rtl8192e_init_dm_priv(IN PADAPTER Adapter)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_struct		*podmpriv = &pHalData->odmpriv;
	/* _rtw_spinlock_init(&(pHalData->odm_stainfo_lock)); */
	Init_ODM_ComInfo_8192e(Adapter);
	odm_init_all_timers(podmpriv);

}

void rtl8192e_deinit_dm_priv(IN PADAPTER Adapter)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_struct		*podmpriv = &pHalData->odmpriv;
	odm_cancel_all_timers(podmpriv);
}