rtl8192eu-linux-driver/hal/OUTSRC/rtl8192e/odm_RegConfig8192E.c

/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *                                        
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/

#include "../odm_precomp.h"

#if (RTL8192E_SUPPORT == 1)  

void
odm_ConfigRFReg_8192E(
	IN 	PDM_ODM_T 				pDM_Odm,
	IN 	u4Byte 					Addr,
	IN 	u4Byte 					Data,
	IN  ODM_RF_RADIO_PATH_E     RF_PATH,
	IN	u4Byte				    RegAddr
	)
{
	if(Addr == 0xfe || Addr == 0xffe)
	{ 					  
		#ifdef CONFIG_LONG_DELAY_ISSUE
		ODM_sleep_ms(50);
		#else		
		ODM_delay_ms(50);
		#endif
	}
	else
	{
		ODM_SetRFReg(pDM_Odm, RF_PATH, RegAddr, bRFRegOffsetMask, Data);
		// Add 1us delay between BB/RF register setting.
		ODM_delay_us(1);


		//For disable/enable test in high temperature, the B6 value will fail to fill. Suggestion by Ed 20130.
		if(Addr == 0xb6)
		{
			u4Byte getvalue=0;
			u1Byte	count =0;
			getvalue = ODM_GetRFReg(pDM_Odm, RF_PATH, Addr, bMaskDWord);	

			ODM_delay_us(1);

			while((getvalue>>8)!=(Data>>8))
			{
				count++;
				ODM_SetRFReg(pDM_Odm, RF_PATH, RegAddr, bRFRegOffsetMask, Data);
				ODM_delay_us(1);
				getvalue = ODM_GetRFReg(pDM_Odm, RF_PATH, Addr, bMaskDWord);
				ODM_RT_TRACE(pDM_Odm,ODM_COMP_INIT, ODM_DBG_TRACE, ("===> ODM_ConfigRFWithHeaderFile: [B6] getvalue 0x%x, Data 0x%x, count %d\n", getvalue, Data,count));			
				if(count>5)
					break;
			}
		}

		if(Addr == 0xb2)
		{
			u4Byte getvalue=0;
			u1Byte	count =0;
			getvalue = ODM_GetRFReg(pDM_Odm, RF_PATH, Addr, bMaskDWord);	

			ODM_delay_us(1);
			
			while(getvalue!=Data)
			{
				count++;
				ODM_SetRFReg(pDM_Odm, RF_PATH, RegAddr, bRFRegOffsetMask, Data);
				ODM_delay_us(1);
				//Do LCK againg 
				ODM_SetRFReg(pDM_Odm, RF_PATH, 0x18, bRFRegOffsetMask, 0x0fc07);
				ODM_delay_us(1);
				getvalue = ODM_GetRFReg(pDM_Odm, RF_PATH, Addr, bMaskDWord);
				ODM_RT_TRACE(pDM_Odm,ODM_COMP_INIT, ODM_DBG_TRACE, ("===> ODM_ConfigRFWithHeaderFile: [B2] getvalue 0x%x, Data 0x%x, count %d\n", getvalue, Data,count));			
				if(count>5)
					break;
			}
		}	
	}	
}


void 
odm_ConfigRF_RadioA_8192E(
	IN 	PDM_ODM_T 				pDM_Odm,
	IN 	u4Byte 					Addr,
	IN 	u4Byte 					Data
	)
{
	u4Byte  content = 0x1000; // RF_Content: radioa_txt
	u4Byte	maskforPhySet= (u4Byte)(content&0xE000);

    odm_ConfigRFReg_8192E(pDM_Odm, Addr, Data, ODM_RF_PATH_A, Addr|maskforPhySet);

    ODM_RT_TRACE(pDM_Odm,ODM_COMP_INIT, ODM_DBG_TRACE, ("===> ODM_ConfigRFWithHeaderFile: [RadioA] %08X %08X\n", Addr, Data));
}

void 
odm_ConfigRF_RadioB_8192E(
	IN 	PDM_ODM_T 				pDM_Odm,
	IN 	u4Byte 					Addr,
	IN 	u4Byte 					Data
	)
{
	u4Byte  content = 0x1001; // RF_Content: radiob_txt
	u4Byte	maskforPhySet= (u4Byte)(content&0xE000);

    odm_ConfigRFReg_8192E(pDM_Odm, Addr, Data, ODM_RF_PATH_B, Addr|maskforPhySet);
	
	ODM_RT_TRACE(pDM_Odm,ODM_COMP_INIT, ODM_DBG_TRACE, ("===> ODM_ConfigRFWithHeaderFile: [RadioB] %08X %08X\n", Addr, Data));
    
}

void 
odm_ConfigMAC_8192E(
 	IN 	PDM_ODM_T 	pDM_Odm,
 	IN 	u4Byte 		Addr,
 	IN 	u1Byte 		Data
 	)
{
	ODM_Write1Byte(pDM_Odm, Addr, Data);
    ODM_RT_TRACE(pDM_Odm,ODM_COMP_INIT, ODM_DBG_TRACE, ("===> ODM_ConfigMACWithHeaderFile: [MAC_REG] %08X %08X\n", Addr, Data));
}

void 
odm_ConfigBB_AGC_8192E(
    IN 	PDM_ODM_T 	pDM_Odm,
    IN 	u4Byte 		Addr,
    IN 	u4Byte 		Bitmask,
    IN 	u4Byte 		Data
    )
{
	ODM_SetBBReg(pDM_Odm, Addr, Bitmask, Data);		
	// Add 1us delay between BB/RF register setting.
	ODM_delay_us(1);

    ODM_RT_TRACE(pDM_Odm,ODM_COMP_INIT, ODM_DBG_TRACE, ("===> ODM_ConfigBBWithHeaderFile: [AGC_TAB] %08X %08X\n", Addr, Data));
}

void
odm_ConfigBB_PHY_REG_PG_8192E(
	IN 	PDM_ODM_T 	pDM_Odm,
	IN	u4Byte		Band,
	IN	u4Byte		RfPath,
	IN	u4Byte		TxNum,
    IN 	u4Byte 		Addr,
    IN 	u4Byte 		Bitmask,
    IN 	u4Byte 		Data
    )
{    
	if (Addr == 0xfe || Addr == 0xffe)
		#ifdef CONFIG_LONG_DELAY_ISSUE
		ODM_sleep_ms(50);
		#else		
		ODM_delay_ms(50);
		#endif
    else 
    {
#if	!(DM_ODM_SUPPORT_TYPE&ODM_AP)
	    PHY_StoreTxPowerByRate(pDM_Odm->Adapter, Band, RfPath, TxNum, Addr, Bitmask, Data);
#endif
    }
	ODM_RT_TRACE(pDM_Odm,ODM_COMP_INIT, ODM_DBG_LOUD, ("===> ODM_ConfigBBWithHeaderFile: [PHY_REG] %08X %08X %08X\n", Addr, Bitmask, Data));
}

void 
odm_ConfigBB_PHY_8192E(
	IN 	PDM_ODM_T 	pDM_Odm,
    IN 	u4Byte 		Addr,
    IN 	u4Byte 		Bitmask,
    IN 	u4Byte 		Data
    )
{    
	if (Addr == 0xfe)
		#ifdef CONFIG_LONG_DELAY_ISSUE
		ODM_sleep_ms(50);
		#else		
		ODM_delay_ms(50);
		#endif
	else if (Addr == 0xfd)
		ODM_delay_ms(5);
	else if (Addr == 0xfc)
		ODM_delay_ms(1);
	else if (Addr == 0xfb)
		ODM_delay_us(50);
	else if (Addr == 0xfa)
		ODM_delay_us(5);
	else if (Addr == 0xf9)
		ODM_delay_us(1);
	else 
	{
		ODM_SetBBReg(pDM_Odm, Addr, Bitmask, Data);		
	}
	
	// Add 1us delay between BB/RF register setting.
	ODM_delay_us(1);
    ODM_RT_TRACE(pDM_Odm,ODM_COMP_INIT, ODM_DBG_TRACE, ("===> ODM_ConfigBBWithHeaderFile: [PHY_REG] %08X %08X\n", Addr, Data));
}

void
odm_ConfigBB_TXPWR_LMT_8192E(
	IN 	PDM_ODM_T 	pDM_Odm,
	IN	pu1Byte		Regulation,
	IN	pu1Byte		Band,
	IN	pu1Byte		Bandwidth,
	IN	pu1Byte		RateSection,
	IN	pu1Byte		RfPath,
	IN	pu1Byte 	Channel,
	IN	pu1Byte		PowerLimit
    )
{   
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN))
	PHY_SetTxPowerLimit(pDM_Odm, Regulation, Band,
		Bandwidth, RateSection, RfPath, Channel, PowerLimit);
#elif (DM_ODM_SUPPORT_TYPE & (ODM_CE))
	PHY_SetTxPowerLimit(pDM_Odm->Adapter, Regulation, Band,
		Bandwidth, RateSection, RfPath, Channel, PowerLimit);
#endif
}

#endif