#!/bin/bash # Forked from binhex's OpenVPN dockers DEBUG=false # Wait until tunnel is up while : ; do tunnelstat=$(netstat -ie | grep -E "tun|tap") if [[ ! -z "${tunnelstat}" ]]; then break else sleep 1 fi done echo "[info] WebUI port defined as ${WEBUI_PORT_ENV}" | ts '%Y-%m-%d %H:%M:%.S' # strip whitespace from start and end of LAN_NETWORK export LAN_NETWORK=$(echo "${LAN_NETWORK}" | sed -e 's~^[ \t]*~~;s~[ \t]*$~~') echo "[info] LAN Network defined as ${LAN_NETWORK}" | ts '%Y-%m-%d %H:%M:%.S' # get default gateway of interfaces as looping through them DEFAULT_GATEWAY=$(ip -4 route list 0/0 | cut -d ' ' -f 3) echo "[info] Default gateway defined as ${DEFAULT_GATEWAY}" | ts '%Y-%m-%d %H:%M:%.S' #echo "[info] Adding ${LAN_NETWORK} as route via docker eth0" | ts '%Y-%m-%d %H:%M:%.S' ip route add "${LAN_NETWORK}" via "${DEFAULT_GATEWAY}" dev eth0 echo "[info] ip route defined as follows..." | ts '%Y-%m-%d %H:%M:%.S' echo "--------------------" ip route echo "--------------------" # setup iptables marks to allow routing of defined ports via eth0 ### if [[ "${DEBUG}" == "true" ]]; then echo "[debug] Modules currently loaded for kernel" ; lsmod fi # check we have iptable_mangle, if so setup fwmark lsmod | grep iptable_mangle iptable_mangle_exit_code=$? if [[ $iptable_mangle_exit_code == 0 ]]; then echo "[info] iptable_mangle support detected, adding fwmark for tables" | ts '%Y-%m-%d %H:%M:%.S' # setup route for qbittorrent webui using set-mark to route traffic for port 8080 to eth0 if [ -z "${WEBUI_PORT_ENV}" ]; then echo "8080 webui" >> /etc/iproute2/rt_tables else echo "${WEBUI_PORT_ENV} webui" >> /etc/iproute2/rt_tables fi ip rule add fwmark 1 table webui ip route add default via ${DEFAULT_GATEWAY} table webui fi # identify docker bridge interface name (probably eth0) docker_interface=$(netstat -ie | grep -vE "lo|tun|tap" | sed -n '1!p' | grep -P -o -m 1 '^[\w]+') if [[ "${DEBUG}" == "true" ]]; then echo "[debug] Docker interface defined as ${docker_interface}" fi # identify ip for docker bridge interface docker_ip=$(ifconfig "${docker_interface}" | grep -o "inet [0-9]*\.[0-9]*\.[0-9]*\.[0-9]*" | grep -o "[0-9]*\.[0-9]*\.[0-9]*\.[0-9]*") if [[ "${DEBUG}" == "true" ]]; then echo "[debug] Docker IP defined as ${docker_ip}" fi # identify netmask for docker bridge interface docker_mask=$(ifconfig "${docker_interface}" | grep -o "netmask [0-9]*\.[0-9]*\.[0-9]*\.[0-9]*" | grep -o "[0-9]*\.[0-9]*\.[0-9]*\.[0-9]*") if [[ "${DEBUG}" == "true" ]]; then echo "[debug] Docker netmask defined as ${docker_mask}" fi # convert netmask into cidr format docker_network_cidr=$(ipcalc "${docker_ip}" "${docker_mask}" | grep -P -o -m 1 "(?<=Network:)\s+[^\s]+" | sed -e 's~^[ \t]*~~;s~[ \t]*$~~') echo "[info] Docker network defined as ${docker_network_cidr}" | ts '%Y-%m-%d %H:%M:%.S' # input iptable rules ### # set policy to drop ipv4 for input iptables -P INPUT DROP # set policy to drop ipv6 for input ip6tables -P INPUT DROP 1>&- 2>&- # accept input to tunnel adapter iptables -A INPUT -i "${VPN_DEVICE_TYPE}" -j ACCEPT # accept input to/from LANs (172.x range is internal dhcp) iptables -A INPUT -s "${docker_network_cidr}" -d "${docker_network_cidr}" -j ACCEPT # accept input to vpn gateway iptables -A INPUT -i eth0 -p $VPN_PROTOCOL --sport $VPN_PORT -j ACCEPT # accept input to qbittorrent webui port if [ -z "${WEBUI_PORT_ENV}" ]; then iptables -A INPUT -i eth0 -p tcp --dport 8080 -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 8080 -j ACCEPT else iptables -A INPUT -i eth0 -p tcp --dport ${WEBUI_PORT_ENV} -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport ${WEBUI_PORT_ENV} -j ACCEPT fi # accept input to qbittorrent daemon port - used for lan access if [ -z "${INCOMING_PORT}" ]; then iptables -A INPUT -i eth0 -s "${LAN_NETWORK}" -p tcp --dport 8999 -j ACCEPT else iptables -A INPUT -i eth0 -s "${LAN_NETWORK}" -p tcp --dport ${INCOMING_PORT} -j ACCEPT fi # accept input icmp (ping) iptables -A INPUT -p icmp --icmp-type echo-reply -j ACCEPT # accept input to local loopback iptables -A INPUT -i lo -j ACCEPT # output iptable rules ### # set policy to drop ipv4 for output iptables -P OUTPUT DROP # set policy to drop ipv6 for output ip6tables -P OUTPUT DROP 1>&- 2>&- # accept output from tunnel adapter iptables -A OUTPUT -o "${VPN_DEVICE_TYPE}" -j ACCEPT # accept output to/from LANs iptables -A OUTPUT -s "${docker_network_cidr}" -d "${docker_network_cidr}" -j ACCEPT # accept output from vpn gateway iptables -A OUTPUT -o eth0 -p $VPN_PROTOCOL --dport $VPN_PORT -j ACCEPT # if iptable mangle is available (kernel module) then use mark if [[ $iptable_mangle_exit_code == 0 ]]; then # accept output from qBittorrent webui port - used for external access if [ -z "${WEBUI_PORT_ENV}" ]; then iptables -t mangle -A OUTPUT -p tcp --dport 8080 -j MARK --set-mark 1 iptables -t mangle -A OUTPUT -p tcp --sport 8080 -j MARK --set-mark 1 else iptables -t mangle -A OUTPUT -p tcp --dport ${WEBUI_PORT_ENV} -j MARK --set-mark 1 iptables -t mangle -A OUTPUT -p tcp --sport ${WEBUI_PORT_ENV} -j MARK --set-mark 1 fi fi # accept output from qBittorrent webui port - used for lan access if [ -z "${WEBUI_PORT_ENV}" ]; then iptables -A OUTPUT -o eth0 -p tcp --dport 8080 -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 8080 -j ACCEPT else iptables -A OUTPUT -o eth0 -p tcp --dport ${WEBUI_PORT_ENV} -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport ${WEBUI_PORT_ENV} -j ACCEPT fi # accept output to qBittorrent daemon port - used for lan access if [ -z "${INCOMING_PORT}" ]; then iptables -A OUTPUT -o eth0 -d "${LAN_NETWORK}" -p tcp --sport 8999 -j ACCEPT else echo "[info] Incoming connections port defined as ${INCOMING_PORT}" | ts '%Y-%m-%d %H:%M:%.S' iptables -A OUTPUT -o eth0 -d "${LAN_NETWORK}" -p tcp --sport ${INCOMING_PORT} -j ACCEPT fi # accept output for icmp (ping) iptables -A OUTPUT -p icmp --icmp-type echo-request -j ACCEPT # accept output from local loopback adapter iptables -A OUTPUT -o lo -j ACCEPT echo "[info] iptables defined as follows..." | ts '%Y-%m-%d %H:%M:%.S' echo "--------------------" iptables -S echo "--------------------" exec /bin/bash /etc/qbittorrent/start.sh