diff --git a/openvpn/openvpn.init b/openvpn/openvpn.init
deleted file mode 100644
index 69052b8..0000000
--- a/openvpn/openvpn.init
+++ /dev/null
@@ -1,317 +0,0 @@
-#!/bin/sh -e
-
-### BEGIN INIT INFO
-# Provides:          openvpn
-# Required-Start:    $network $remote_fs $syslog
-# Required-Stop:     $network $remote_fs $syslog
-# Should-Start:      network-manager
-# Should-Stop:       network-manager
-# X-Start-Before:    $x-display-manager gdm kdm xdm wdm ldm sdm nodm
-# X-Interactive:     true
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: Openvpn VPN service
-# Description: This script will start OpenVPN tunnels as specified
-#              in /etc/default/openvpn and /etc/openvpn/*.conf
-### END INIT INFO
-
-# Original version by Robert Leslie
-# <rob@mars.org>, edited by iwj and cs
-# Modified for openvpn by Alberto Gonzalez Iniesta <agi@inittab.org>
-# Modified for restarting / starting / stopping single tunnels by Richard Mueller <mueller@teamix.net>
-
-. /lib/lsb/init-functions
-
-test $DEBIAN_SCRIPT_DEBUG && set -v -x
-
-DAEMON=/usr/sbin/openvpn
-DESC="virtual private network daemon(s)"
-CONFIG_DIR=/config/openvpn
-test -x $DAEMON || exit 0
-test -d $CONFIG_DIR || exit 0
-
-# Source defaults file; edit that file to configure this script.
-AUTOSTART=$(find /config/openvpn -maxdepth 1 -name "*.ovpn" -printf "%f\n" -quit | cut -d '.' -f 1)
-STATUSREFRESH=10
-OMIT_SENDSIGS=0
-if test -e /etc/default/openvpn ; then
-  . /etc/default/openvpn
-fi
-
-start_vpn () {
-    if grep -q '^[       ]*daemon' $CONFIG_DIR/$NAME.ovpn ; then
-      # daemon already given in config file
-      DAEMONARG=
-    else
-      # need to daemonize
-      DAEMONARG="--daemon ovpn-$NAME"
-    fi
-
-    if grep -q '^[       ]*status ' $CONFIG_DIR/$NAME.ovpn ; then
-      # status file already given in config file
-      STATUSARG=""
-    elif test $STATUSREFRESH -eq 0 ; then
-      # default status file disabled in /etc/default/openvpn
-      STATUSARG=""
-    else
-      # prepare default status file
-      STATUSARG="--status /run/openvpn/$NAME.status $STATUSREFRESH"
-    fi
-
-    # tun using the "subnet" topology confuses the routing code that wrongly
-    # emits ICMP redirects for client to client communications
-    SAVED_DEFAULT_SEND_REDIRECTS=0
-    if grep -q '^[[:space:]]*dev[[:space:]]*tun' $CONFIG_DIR/$NAME.ovpn && \
-       grep -q '^[[:space:]]*topology[[:space:]]*subnet' $CONFIG_DIR/$NAME.ovpn ; then
-        # When using "client-to-client", OpenVPN routes the traffic itself without
-        # involving the TUN/TAP interface so no ICMP redirects are sent
-        if ! grep -q '^[[:space:]]*client-to-client' $CONFIG_DIR/$NAME.ovpn ; then
-            sysctl -w net.ipv4.conf.all.send_redirects=0 > /dev/null
-
-            # Save the default value for send_redirects before disabling it
-            # to make sure the tun device is created with send_redirects disabled
-            SAVED_DEFAULT_SEND_REDIRECTS=$(sysctl -n net.ipv4.conf.default.send_redirects)
-
-            if [ "$SAVED_DEFAULT_SEND_REDIRECTS" -ne 0 ]; then
-              sysctl -w net.ipv4.conf.default.send_redirects=0 > /dev/null
-            fi
-        fi
-    fi
-
-    # Handle backwards compatibility
-    script_security=""
-    if test -z "$( grep '^[[:space:]]*script-security[[:space:]]' $CONFIG_DIR/$NAME.ovpn )" ; then
-        script_security="--script-security 2"
-    fi
-
-    STATUS=0
-    start-stop-daemon --start --quiet --oknodo \
-        --pidfile /run/openvpn/$NAME.pid \
-        --exec $DAEMON -- $OPTARGS --writepid /run/openvpn/$NAME.pid \
-        $DAEMONARG $STATUSARG --cd $CONFIG_DIR \
-        --config $CONFIG_DIR/$NAME.ovpn $script_security < /dev/null || STATUS=1
-
-    [ "$OMIT_SENDSIGS" -ne 1 ] || ln -s /run/openvpn/$NAME.pid /run/sendsigs.omit.d/openvpn.$NAME.pid
-
-    # Set the back the original default value of send_redirects if it was changed
-    if [ "$SAVED_DEFAULT_SEND_REDIRECTS" -ne 0 ]; then
-      sysctl -w net.ipv4.conf.default.send_redirects=$SAVED_DEFAULT_SEND_REDIRECTS > /dev/null
-    fi
-}
-stop_vpn () {
-  start-stop-daemon --stop --quiet --oknodo \
-      --pidfile $PIDFILE --exec $DAEMON --retry 10
-  if [ "$?" -eq 0 ]; then
-    rm -f $PIDFILE
-    [ "$OMIT_SENDSIGS" -ne 1 ] || rm -f /run/sendsigs.omit.d/openvpn.$NAME.pid
-    rm -f /run/openvpn/$NAME.status 2> /dev/null
-    log_end_msg 0
-  else
-    log_failure_msg "  Unable to stop VPN '$NAME'"
-  fi
-}
-
-case "$1" in
-start)
-  log_action_begin_msg "Starting $DESC"
-
-  # first create /run directory so it's present even
-  # when no VPN are autostarted by this script, but later
-  # by systemd openvpn@.service
-  mkdir -p /run/openvpn
-
-  # autostart VPNs
-  if test -z "$2" ; then
-    # check if automatic startup is disabled by AUTOSTART=none
-    if test "x$AUTOSTART" = "xnone" -o -z "$AUTOSTART" ; then
-      log_warning_msg "  Autostart disabled, no VPN will be started."
-      exit 0
-    fi
-    if test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
-      # all VPNs shall be started automatically
-      for CONFIG in `cd $CONFIG_DIR; ls *.ovpn 2> /dev/null`; do
-        NAME=${CONFIG%%.ovpn}
-        log_daemon_msg "  Autostarting VPN '$NAME'"
-        start_vpn
-      done
-    else
-      # start only specified VPNs
-      for NAME in $AUTOSTART ; do
-        if test -e $CONFIG_DIR/$NAME.ovpn ; then
-          log_daemon_msg "  Autostarting VPN '$NAME'"
-          start_vpn
-        else
-          log_failure_msg "  Autostarting VPN '$NAME': missing $CONFIG_DIR/$NAME.ovpn file !"
-          STATUS=1
-        fi
-      done
-    fi
-  #start VPNs from command line
-  else
-    while shift ; do
-      [ -z "$1" ] && break
-      NAME=$1
-      if test -e $CONFIG_DIR/$NAME.ovpn ; then
-        log_daemon_msg "  Starting VPN '$NAME'"
-        start_vpn
-      else
-        log_failure_msg "  Starting VPN '$NAME': missing $CONFIG_DIR/$NAME.ovpn file !"
-       STATUS=1
-      fi
-    done
-  fi
-  exit ${STATUS:-0}
-  ;;
-stop)
-  log_action_begin_msg "Stopping $DESC"
-  if test -z "$2" ; then
-    for PIDFILE in `ls /run/openvpn/*.pid 2> /dev/null`; do
-      NAME=`echo $PIDFILE | cut -c14-`
-      NAME=${NAME%%.pid}
-      log_daemon_msg "  Stopping VPN '$NAME'"
-      stop_vpn
-    done
-    if test -z "$PIDFILE" ; then
-      log_warning_msg "  No VPN is running."
-    fi
-  else
-    while shift ; do
-      [ -z "$1" ] && break
-      if test -e /run/openvpn/$1.pid ; then
-        log_daemon_msg "  Stopping VPN '$1'"
-        PIDFILE=`ls /run/openvpn/$1.pid 2> /dev/null`
-        NAME=`echo $PIDFILE | cut -c14-`
-        NAME=${NAME%%.pid}
-        stop_vpn
-      else
-        log_failure_msg "  Stopping VPN '$1': No such VPN is running."
-      fi
-    done
-  fi
-  ;;
-# Only 'reload' running VPNs. New ones will only start with 'start' or 'restart'.
-reload|force-reload)
-  log_action_begin_msg "Reloading $DESC"
-  for PIDFILE in `ls /run/openvpn/*.pid 2> /dev/null`; do
-    NAME=`echo $PIDFILE | cut -c14-`
-    NAME=${NAME%%.pid}
-# If openvpn if running under a different user than root we'll need to restart
-    if egrep '^[[:blank:]]*user[[:blank:]]' $CONFIG_DIR/$NAME.ovpn > /dev/null 2>&1 ; then
-      log_daemon_msg "  Stopping VPN '$NAME'"
-      stop_vpn
-      log_daemon_msg "  Restarting VPN '$NAME'"
-      start_vpn
-    else
-      log_daemon_msg "  Restarting VPN '$NAME'"
-      kill -HUP `cat $PIDFILE` || true
-      log_end_msg 0
-    fi
-  done
-  if test -z "$PIDFILE" ; then
-    log_warning_msg "  No VPN is running."
-  fi
-  ;;
-# Only 'soft-restart' running VPNs. New ones will only start with 'start' or 'restart'.
-soft-restart)
-  log_action_begin_msg "Soft-restarting $DESC"
-  for PIDFILE in `ls /run/openvpn/*.pid 2> /dev/null`; do
-    NAME=`echo $PIDFILE | cut -c14-`
-    NAME=${NAME%%.pid}
-    log_daemon_msg "  Soft-restarting VPN '$NAME'"
-    kill -USR1 `cat $PIDFILE` || true
-    log_end_msg 0
-  done
-  if test -z "$PIDFILE" ; then
-    log_warning_msg "  No VPN is running."
-  fi
-  ;;
-restart)
-  shift
-  $0 stop ${@}
-  $0 start ${@}
-  ;;
-cond-restart)
-  log_action_begin_msg "Restarting $DESC"
-  for PIDFILE in `ls /run/openvpn/*.pid 2> /dev/null`; do
-    NAME=`echo $PIDFILE | cut -c14-`
-    NAME=${NAME%%.pid}
-    log_daemon_msg "  Stopping VPN '$NAME'"
-    stop_vpn
-    log_daemon_msg "  Restarting VPN '$NAME'"
-    start_vpn
-  done
-  if test -z "$PIDFILE" ; then
-    log_warning_msg "  No VPN is running."
-  fi
-  ;;
-status)
-  GLOBAL_STATUS=0
-  if test -z "$2" ; then
-    # We want status for all defined VPNs.
-    # Returns success if all autostarted VPNs are defined and running
-    if test "x$AUTOSTART" = "xnone" ; then
-      # Consider it a failure if AUTOSTART=none
-      log_warning_msg "No VPN autostarted"
-      GLOBAL_STATUS=1
-    else
-      if ! test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
-        # Consider it a failure if one of the autostarted VPN is not defined
-        for VPN in $AUTOSTART ; do
-          if ! test -f $CONFIG_DIR/$VPN.conf ; then
-            log_warning_msg "VPN '$VPN' is in AUTOSTART but is not defined"
-            GLOBAL_STATUS=1
-          fi
-        done
-      fi
-    fi
-    for CONFIG in `cd $CONFIG_DIR; ls *.conf 2> /dev/null`; do
-      NAME=${CONFIG%%.conf}
-      # Is it an autostarted VPN ?
-      if test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
-        AUTOVPN=1
-      else
-        if test "x$AUTOSTART" = "xnone" ; then
-          AUTOVPN=0
-        else
-          AUTOVPN=0
-          for VPN in $AUTOSTART; do
-            if test "x$VPN" = "x$NAME" ; then
-              AUTOVPN=1
-            fi
-          done
-        fi
-      fi
-      if test "x$AUTOVPN" = "x1" ; then
-        # If it is autostarted, then it contributes to global status
-        status_of_proc -p /run/openvpn/${NAME}.pid openvpn "VPN '${NAME}'" || GLOBAL_STATUS=1
-      else
-        status_of_proc -p /run/openvpn/${NAME}.pid openvpn "VPN '${NAME}' (non autostarted)" || true
-      fi
-    done
-  else
-    # We just want status for specified VPNs.
-    # Returns success if all specified VPNs are defined and running
-    while shift ; do
-      [ -z "$1" ] && break
-      NAME=$1
-      if test -e $CONFIG_DIR/$NAME.ovpn ; then
-        # Config exists
-        status_of_proc -p /run/openvpn/${NAME}.pid openvpn "VPN '${NAME}'" || GLOBAL_STATUS=1
-      else
-        # Config does not exist
-        log_warning_msg "VPN '$NAME': missing $CONFIG_DIR/$NAME.ovpn file !"
-        GLOBAL_STATUS=1
-      fi
-    done
-  fi
-  exit $GLOBAL_STATUS
-  ;;
-*)
-  echo "Usage: $0 {start|stop|reload|restart|force-reload|cond-restart|soft-restart|status}" >&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# vim:set ai sts=2 sw=2 tw=0: