Sixfab_PPP_Installer/ppp_install.sh
saeedjohar 7bb5477872
WiringPi installation from source code (#35)
* installing wiringPi from source code

* gpio -vshowing custom error message
2022-05-13 19:06:36 +03:00

318 lines
9.5 KiB
Bash
Executable File

#!/bin/bash
# Created on November 27, 2020 by Yasin Kaya (selengalp)
SIXFAB_PATH="/opt/sixfab"
PPP_PATH="/opt/sixfab/ppp_connection_manager"
REPO_PATH="https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer"
BRANCH=master
SOURCE_PATH="./src"
SCRIPT_PATH="./src/reconnect_scripts"
RECONNECT_SCRIPT_NAME="ppp_reconnect.sh"
MANAGER_SCRIPT_NAME="ppp_connection_manager.sh"
SERVICE_NAME="ppp_connection_manager.service"
YELLOW='\033[1;33m'
RED='\033[0;31m'
BLUE='\033[1;34m'
GREEN='\033[0;32m'
SET='\033[0m'
# Global Varibales
POWERUP_REQ=1
POWERUP_NOT_REQ=0
STATUS_GPRS=19
STATUS_CELL_IOT_APP=20
STATUS_CELL_IOT=23
STATUS_TRACKER=23
POWERKEY_GPRS=26
POWERKEY_CELL_IOT_APP=11
POWERKEY_CELL_IOT=24
POWERKEY_TRACKER=24
function colored_echo
{
COLOR=${2:-$YELLOW}
echo -e "$COLOR$1 ${SET}"
}
# Check Sixfab path
if [[ -e $SIXFAB_PATH ]]; then
colored_echo "Sixfab path already exist!" ${SET}
else
sudo mkdir $SIXFAB_PATH
colored_echo "Sixfab path is created." ${SET}
fi
# Check PPP path
if [[ -e $PPP_PATH ]]; then
colored_echo "PPP path already exist!" ${SET}
else
sudo mkdir $PPP_PATH
colored_echo "PPP path is created." ${SET}
fi
colored_echo "Please choose your Sixfab Shield/HAT:"
colored_echo "1: GSM/GPRS Shield"
colored_echo "2: 3G, 4G/LTE Base Shield"
colored_echo "3: Cellular IoT App Shield"
colored_echo "4: Cellular IoT HAT"
colored_echo "5: Tracker HAT"
colored_echo "6: 3G/4G Base HAT"
read shield_hat
case $shield_hat in
1) colored_echo "You chose GSM/GPRS Shield" ${GREEN};;
2) colored_echo "You chose Base Shield" ${GREEN};;
3) colored_echo "You chose CellularIoT Shield" ${GREEN};;
4) colored_echo "You chose CellularIoT HAT" ${GREEN};;
5) colored_echo "You chose Tracker HAT" ${GREEN};;
6) colored_echo "You chose 3G/4G Base HAT" ${GREEN};;
*) colored_echo "Wrong Selection, exiting" ${RED}; exit 1;
esac
colored_echo "Checking requirements..."
colored_echo "Updating headers..."
sudo apt-get update
colored_echo "Copying setup files..."
cp $SOURCE_PATH/chat-connect chat-connect
cp $SOURCE_PATH/chat-disconnect chat-disconnect
cp $SOURCE_PATH/provider provider
colored_echo "ppp installing..."
apt-get install ppp -y
if [[ $? -ne 0 ]]; then colored_echo "Process failed" ${RED}; exit 1; fi
colored_echo "What is your carrier APN?"
read carrierapn
colored_echo "Your Input is : $carrierapn" ${GREEN}
while [ 1 ]
do
colored_echo "Does your carrier need username and password? [Y/n]"
read usernpass
colored_echo "You chose $usernpass" ${GREEN}
case $usernpass in
[Yy]* )
while [ 1 ]
do
colored_echo "Enter username"
read username
colored_echo "Your Input is : $username" ${GREEN}
colored_echo "Enter password"
read password
colored_echo "Your Input is : $password" ${GREEN}
sed -i "s/noauth/#noauth\nuser \"$username\"\npassword \"$password\"/" provider
break
done
break;;
[Nn]* ) break;;
*) colored_echo "Wrong Selection, Select among Y or n" ${RED};;
esac
done
colored_echo "What is your device communication PORT? (ttyS0/ttyUSB3/etc.)"
read devicename
colored_echo "Your input is: $devicename" ${GREEN}
if grep -q "ttyS0" <<<"$devicename"; then
colored_echo "*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-" ${BLUE}
colored_echo "REMINDER!" ${BLUE}
colored_echo "- Disable serial console and enable miniuart to use ttyS0 as the serial interface." ${SET}
colored_echo "✔ If your ttyS0 (miniuart) port is enabled, press ENTER and continue to installation." ${SET}
colored_echo "✘ If not, please follow the instructions to enable ttyS0 interface on Raspberry Pi" ${SET}
echo -e "
1. Start raspi-config: ${BLUE}sudo raspi-config${SET}.
2. Select option 3 - ${BLUE}Interface Options${SET}.
3. Select option P6 - ${BLUE}Serial Port${SET}.
4. ${BLUE}At the prompt Would you like a login shell to be accessible over serial?${SET} answer ${BLUE}'No'${SET}
5. ${BLUE}At the prompt Would you like the serial port hardware to be enabled?${SET} answer ${BLUE}'Yes'${SET}
6. Exit raspi-config and ${BLUE}reboot${SET} the Pi for changes to take effect.
"
colored_echo "*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-" ${BLUE}
echo
echo -e "Press ${BLUE}ENTER${SET} key to continue to installation or press ${BLUE}CTRL^C${SET} to abort installation and enable ttyS0 serial interface."
read -p "" ENTER
colored_echo "Doing atcom configuration for ttyS0 serial..."
# create atcom config
echo port: "/dev/ttyS0" > configs.yml
mv configs.yml $PPP_PATH
else
# delete atcom config
ls $PPP_PATH | grep configs.yml > /dev/null
if [[ $? -eq 0 ]]; then rm $PPP_PATH/configs.yml; fi
fi
mkdir -p /etc/chatscripts
mv chat-connect /etc/chatscripts/
mv chat-disconnect /etc/chatscripts/
mkdir -p /etc/ppp/peers
sed -i "s/#APN/$carrierapn/" provider
sed -i "s/#DEVICE/$devicename/" provider
mv provider /etc/ppp/peers/provider
if ! (grep -q 'sudo route' /etc/ppp/ip-up ); then
echo "sudo route add default ppp0" >> /etc/ppp/ip-up
fi
if [[ $shield_hat -eq 2 ]] || [[ $shield_hat -eq 6 ]]; then
if ! (grep -q 'max_usb_current' /boot/config.txt ); then
echo "max_usb_current=1" >> /boot/config.txt
fi
fi
while [ 1 ]
do
colored_echo "Do you want to activate auto connect/reconnect service at R.Pi boot up? [Y/n]"
read auto_reconnect
colored_echo "You chose $auto_reconnect" ${GREEN}
case $auto_reconnect in
[Yy]* )
colored_echo "Installing python3 if it is required..."
if ! [ -x "$(command -v python3)" ]; then
sudo apt-get install python3 -y
if [[ $? -ne 0 ]]; then colored_echo "Process failed" ${RED}; exit 1; fi
fi
colored_echo "Installing pip3 if it is required..."
if ! [ -x "$(command -v pip3)" ]; then
sudo apt-get install python3-pip -y
if [[ $? -ne 0 ]]; then colored_echo "Process failed" ${RED}; exit 1; fi
fi
colored_echo "Installing or upgrading atcom if it is required..."
pip3 install -U atcom
if [[ $? -ne 0 ]]; then colored_echo "Process failed" ${RED}; exit 1; fi
source ~/.profile
if [[ $? -ne 0 ]]; then colored_echo "Process failed" ${RED}; exit 1; fi
colored_echo "Installing WiringPi (gpio tool) if required..."
# Check the availability of the gpio.
gpio -v > /dev/null 2>&1
if [[ $? -ne 0 ]]; then colored_echo "WiringPi not found\n" ${RED} ; fi
# Download WiringPi from https://github.com/WiringPi/WiringPi.git
git clone https://github.com/WiringPi/WiringPi.git
# change directory to WiringPi and build from source code
pushd WiringPi && ./build && popd
if [[ $? -ne 0 ]]; then colored_echo "WiringPi installation failed \nTry manual insatallation" ${RED} ; fi
# # test wiringpi and fix if there is any issue
# gpio readall | grep Oops > /dev/null
# if [[ $? -ne 1 ]]; then
# colored_echo "Known wiringPi issue is detected! WiringPi is updating..."
# # wget https://project-downloads.drogon.net/wiringpi-latest.deb
# # sudo dpkg -i wiringpi-latest.deb
# fi
colored_echo "Copying setup file..."
cp $SOURCE_PATH/$SERVICE_NAME $SERVICE_NAME
cp $SOURCE_PATH/functions.sh functions.sh
cp $SOURCE_PATH/configs.sh configs.sh
cp $SOURCE_PATH/configure_modem.sh configure_modem.sh
cp $SOURCE_PATH/$MANAGER_SCRIPT_NAME $MANAGER_SCRIPT_NAME
# APN Configuration
sed -i "s/SIM_APN/$carrierapn/" configure_modem.sh
if [ $shield_hat -eq 1 ]; then
cp $SCRIPT_PATH/reconnect_gprsshield $RECONNECT_SCRIPT_NAME
sed -i "s/STATUS_PIN/$STATUS_GPRS/" configure_modem.sh
sed -i "s/POWERKEY_PIN/$POWERKEY_GPRS/" configure_modem.sh
sed -i "s/POWERUP_FLAG/$POWERUP_REQ/" configure_modem.sh
elif [ $shield_hat -eq 2 ]; then
cp $SCRIPT_PATH/reconnect_baseshield $RECONNECT_SCRIPT_NAME
sed -i "s/POWERUP_FLAG/$POWERUP_NOT_REQ/" configure_modem.sh
elif [ $shield_hat -eq 3 ]; then
cp $SCRIPT_PATH/reconnect_cellulariot_app $RECONNECT_SCRIPT_NAME
sed -i "s/STATUS_PIN/$STATUS_CELL_IOT_APP/" configure_modem.sh
sed -i "s/POWERKEY_PIN/$POWERKEY_CELL_IOT_APP/" configure_modem.sh
sed -i "s/POWERUP_FLAG/$POWERUP_REQ/" configure_modem.sh
elif [ $shield_hat -eq 4 ]; then
cp $SCRIPT_PATH/reconnect_cellulariot $RECONNECT_SCRIPT_NAME
sed -i "s/STATUS_PIN/$STATUS_CELL_IOT/" configure_modem.sh
sed -i "s/POWERKEY_PIN/$POWERKEY_CELL_IOT/" configure_modem.sh
sed -i "s/POWERUP_FLAG/$POWERUP_REQ/" configure_modem.sh
elif [ $shield_hat -eq 5 ]; then
cp $SCRIPT_PATH/reconnect_tracker $RECONNECT_SCRIPT_NAME
sed -i "s/STATUS_PIN/$STATUS_TRACKER/" configure_modem.sh
sed -i "s/POWERKEY_PIN/$POWERKEY_TRACKER/" configure_modem.sh
sed -i "s/POWERUP_FLAG/$POWERUP_REQ/" configure_modem.sh
elif [ $shield_hat -eq 6 ]; then
cp $SCRIPT_PATH/reconnect_basehat $RECONNECT_SCRIPT_NAME
sed -i "s/POWERUP_FLAG/$POWERUP_NOT_REQ/" configure_modem.sh
fi
mv functions.sh $PPP_PATH
mv configs.sh $PPP_PATH
mv configure_modem.sh $PPP_PATH
mv $RECONNECT_SCRIPT_NAME $PPP_PATH
mv $MANAGER_SCRIPT_NAME $PPP_PATH
mv $SERVICE_NAME /etc/systemd/system/
systemctl daemon-reload
systemctl enable $SERVICE_NAME
break;;
[Nn]* ) echo -e "${YELLOW}To connect to internet run ${BLUE}\"sudo pon\"${YELLOW} and to disconnect run ${BLUE}\"sudo poff\" ${SET}"
break;;
*) colored_echo "Wrong Selection, Select among Y or n" ${RED};;
esac
done
read -p "Press ENTER key to reboot" ENTER
colored_echo "Rebooting..." ${GREEN}
reboot