Merge cc99c34a5e into fc6506b125

ppp_install_jetson.sh

@@ -3,16 +3,19 @@
 # Created on July 12, 2019 by Saeed Johar (saeedjohar)
 # Revised on November 19, 2020 by Yasin Kaya (selengalp) 
 
+source src/functions.sh
+
 SIXFAB_PATH="/opt/sixfab"
 PPP_PATH="/opt/sixfab/ppp_connection_manager"
 
-REPO_PATH="https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer"
+# NEEDS TO BE CHANGED TO SIXFAB IF PULLED
+REPO_PATH="https://raw.githubusercontent.com/bzt/Sixfab_PPP_Installer"
 BRANCH=master
 SOURCE_PATH="$REPO_PATH/$BRANCH/src"
 SCRIPT_PATH="$REPO_PATH/$BRANCH/src/reconnect_scripts"
-RECONNECT_SCRIPT_NAME="ppp_reconnect.sh"
-MANAGER_SCRIPT_NAME="ppp_connection_manager.sh"
-SERVICE_NAME="ppp_connection_manager.service"
+MANAGER_SCRIPT_NAME="jetson_ppp_connection_manager.sh"
+SERVICE_NAME="jetson_ppp_connection_manager.service"
+UDEV_RULE_NAME="20-usb-bus.rules"
 
 YELLOW='\033[1;33m'
 RED='\033[0;31m'
@@ -139,5 +142,58 @@ if ! (grep -q 'sudo route' /etc/ppp/ip-up ); then
     echo "sudo route add default ppp0" >> /etc/ppp/ip-up	
 fi
 
+while [ 1 ]
+do
+	colored_echo "Do you want to activate auto connect service at boot up? [Y/n]"
+	read auto_reconnect
+
+	colored_echo "You chose $auto_connect" ${GREEN} 
+
+	case $auto_reconnect in
+		[Yy]* )    colored_echo "Copying setup file..."
+			  
+			wget --no-check-certificate  $SOURCE_PATH/$SERVICE_NAME -O $SERVICE_NAME
+			if [[ $? -ne 0 ]]; then colored_echo "Download failed" ${RED}; exit 1; fi
+			
+			wget --no-check-certificate  $SOURCE_PATH/functions.sh -O functions.sh
+			if [[ $? -ne 0 ]]; then colored_echo "Download failed" ${RED}; exit 1; fi
+			
+			wget --no-check-certificate  $SOURCE_PATH/configs.sh -O configs.sh
+			if [[ $? -ne 0 ]]; then colored_echo "Download failed" ${RED}; exit 1; fi
+			
+			wget --no-check-certificate  $SOURCE_PATH/jetson_configure_modem.sh -O jetson_configure_modem.sh
+			if [[ $? -ne 0 ]]; then colored_echo "Download failed" ${RED}; exit 1; fi
+			
+			wget --no-check-certificate  $SOURCE_PATH/$MANAGER_SCRIPT_NAME -O $MANAGER_SCRIPT_NAME
+			if [[ $? -ne 0 ]]; then colored_echo "Download failed" ${RED}; exit 1; fi
+
+			wget --no-check-certificate  $SOURCE_PATH/$UDEV_RULE_NAME -O $UDEV_RULE_NAME
+			if [[ $? -ne 0 ]]; then colored_echo "Download failed" ${RED}; exit 1; fi
+			
+			# APN Configuration
+			sed -i "s/SIM_APN/$carrierapn/" jetson_configure_modem.sh
+
+			# Devicename
+			sed -i "s/DEVICE/$devicename/" jetson_configure_modem.sh
+			sed -i "s/DEVICE/$devicename/" functions.sh
+  
+			mv functions.sh $PPP_PATH
+			mv configs.sh $PPP_PATH
+			mv jetson_configure_modem.sh $PPP_PATH
+			mv $MANAGER_SCRIPT_NAME $PPP_PATH
+			mv $SERVICE_NAME /etc/systemd/system/
+			mv $UDEV_RULE_NAME /etc/udev/rules.d/
+
+			systemctl daemon-reload
+			systemctl enable $SERVICE_NAME
+			
+			break;;
+			  
+		[Nn]* )    echo -e "${YELLOW}To connect to internet run ${BLUE}\"sudo pon\"${YELLOW} and to disconnect run ${BLUE}\"sudo poff\" ${SET}"
+			  break;;
+		*)   colored_echo "Wrong Selection, Select among Y or n" ${RED};;
+	esac
+done
+
 read -p "Press ENTER key to reboot" ENTER
 reboot

src/20-usb-bus.rules

@@ -0,0 +1,3 @@
+# UDEV RULE FOR SIXFAB WITH EC-25-E
+SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACE_NUM}="$attr{bInterfaceNumber}"
+SUBSYSTEMS=="usb", KERNEL=="ttyUSB[0-9]*", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", SYMLINK+="sixfab$env{ID_USB_INTERFACE_NUM}", TAG+="systemd"

src/functions.sh

@@ -10,6 +10,9 @@ CYAN='\033[0;36m'
 PURPLE='\033[0;35m'
 SET='\033[0m'
 
+# default arguments
+PORT=/dev/DEVICE
+
 function debug
 {
     ECHO_PARAM=${2:-''}
@@ -25,14 +28,14 @@ function check_network()
         NETWORK_OK=0
 
         debug "SIM Status: " "-n" # no line break
-        atcom AT+CPIN? | grep "CPIN: READY"
+        atcom -p $PORT AT+CPIN? | grep "CPIN: READY"
         SIM_READY=$?
 
-        if [[ $SIM_READY -ne 0 ]]; then  atcom AT+CPIN? | grep "CPIN:"; fi
+        if [[ $SIM_READY -ne 0 ]]; then  atcom -p $PORT AT+CPIN? | grep "CPIN:"; fi
 
 
         debug "Network Registration Status: " "-n" # no line break
-        NR_TEXT=`atcom AT+CREG? | grep "CREG:"`
+        NR_TEXT=`atcom -p $PORT AT+CREG? | grep "CREG:"`
         echo $NR_TEXT
 
          # For super SIM

src/jetson_configure_modem.sh

@@ -0,0 +1,56 @@
+#!/bin/bash
+
+source functions.sh
+
+# only for "2: 3G, 4G/LTE Base Shield"
+
+# default arguments
+APN=SIM_APN
+PORT=/dev/DEVICE
+
+### Modem configuration for RMNET/PPP mode ##################################
+debug "Checking APN and Modem Modem..."
+
+# APN Configuration
+# -----------------
+atcom -p $PORT "AT+CGDCONT?" | grep $APN > /dev/null
+
+if [[ $? -ne 0 ]]; then
+    atcom -p $PORT "AT+CGDCONT=1,\"IPV4V6\",\"$APN\""
+    debug "APN is updated."
+fi
+
+# Check the vendor 
+# ON JETSON ONLY THE vendor:product ID is SHOWN
+lsusb | grep 2c7c >> /dev/null
+IS_QUECTEL=$?
+
+
+# Modem Mode Configuration
+# ------------------------
+# For Quectel
+if [[ $IS_QUECTEL -eq 0 ]]; then
+
+    # Quectel EC25-E
+    lsusb | grep 0125 > /dev/null
+    MODEL_EC25E=$?
+
+    if [[ $MODEL_EC25E -eq 0 ]]; then
+        
+        # EC25 or derives.
+        sudo pon
+
+    fi
+
+# Unknown
+else
+    debug "The cellular module couldn't be detected!"
+    exit 1
+fi
+### End of Modem configuration for RMNET/PPP mode ############################
+
+
+# Check the network is ready
+# --------------------------
+if check_network -eq 0; then exit 0; else debug "Network registration is failed!. Modem configuration is unsuccesfully ended!"; exit 1; fi
+

src/jetson_ppp_connection_manager.service

@@ -0,0 +1,19 @@
+[Unit]
+Description=Jetson PPP Connection Manager
+# NEEDS TO BE CHANGED TO YOUR DEVICE
+After=dev-sixfab03.device
+# OR
+# After=network.target
+
+[Service]
+Type=simple
+ExecStart=/bin/bash jetson_ppp_connection_manager.sh
+WorkingDirectory=/opt/sixfab/ppp_connection_manager
+StandardOutput=inherit
+StandardError=inherit
+RemainAfterExit=true
+Restart=on-failure
+RestartSec=5s
+
+[Install]
+WantedBy=multi-user.target

src/jetson_ppp_connection_manager.sh

@@ -0,0 +1,21 @@
+#!/bin/bash
+
+source functions.sh
+
+for i in {1..4}; do
+    bash jetson_configure_modem.sh
+    WAS_SUCCESSFUL=$?
+    
+    
+    if [[ $WAS_SUCCESSFUL -eq 0 ]]; then
+        debug "Jetson configure modem successful"
+    else
+        debug "Jetson configure modem failed: Exit code = $WAS_SUCCESSFUL"
+        exit 1
+    fi
+    
+    if [[ $MODEM_CONFIG -eq 0 ]]; then
+        break
+    fi
+    sleep 1
+done