isnatll script is compatible with miniuart (ttyS0 port)

This commit is contained in:
Yasin Kaya 2020-11-27 09:48:41 +00:00
parent 69a94b0e73
commit 85f5503174

View File

@ -170,7 +170,25 @@ read devicename
colored_echo "Your input is: $devicename" ${GREEN}
if grep -q "ttyS0" <<<"$devicename"; then
debug "Doing atcom configuration for ttyS0 serial..."
colored_echo "*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-" ${BLUE}
colored_echo "REMINDER!" ${BLUE}
colored_echo "- Disable serial console and enable miniuart to use ttyS0 as the serial interface." ${SET}
colored_echo "✔ If your ttyS0 (miniuart) port is enabled, press ENTER and continue to installation." ${SET}
colored_echo "✘ If not, please follow the instructions to enable ttyS0 interface on Raspberry Pi" ${SET}
echo -e "
1. Start raspi-config: ${BLUE}sudo raspi-config${SET}.
2. Select option 3 - ${BLUE}Interface Options${SET}.
3. Select option P6 - ${BLUE}Serial Port${SET}.
4. ${BLUE}At the prompt Would you like a login shell to be accessible over serial?${SET} answer ${BLUE}'No'${SET}
5. ${BLUE}At the prompt Would you like the serial port hardware to be enabled?${SET} answer ${BLUE}'Yes'${SET}
6. Exit raspi-config and ${BLUE}reboot${SET} the Pi for changes to take effect.
"
colored_echo "*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-" ${BLUE}
echo
echo -e "Press ${BLUE}ENTER${SET} key to continue to installation or press ${BLUE}CTRL^C${SET} to abort installation and enable ttyS0 serial interface."
read -p "" ENTER
colored_echo "Doing atcom configuration for ttyS0 serial..."
# create atcom config
echo port: "/dev/ttyS0" > configs.yml
mv configs.yml $PPP_PATH