diff --git a/ppp_installer/reconnect_basehat b/ppp_installer/reconnect_basehat
index fd76725..9591265 100644
--- a/ppp_installer/reconnect_basehat
+++ b/ppp_installer/reconnect_basehat
@@ -1,54 +1,12 @@
 #!/bin/env bash
 
+source functions.sh
+source configs.sh
+
 # Pinout for base hat
 POWER_OFF=26
 W_DISABLE=19
 
-# General variables
-INTERVAL=60
-DOUBLE_CHECK_WAIT=10
-PING_TIMEOUT=9
-
-function debug()
-{
-    echo $(date "+%Y/%m/%d - %H:%M:%S :") "$1"
-}
-
-function check_network()
-{
-    # Check the network is ready
-    debug "Checking the network is ready..."
-
-    for i in {1..600}; do
-        NETWORK_OK=0
-
-        debug "SIM Status:"
-        atcom AT+CPIN? OK ERROR 10 | grep "CPIN: READY"
-        SIM_READY=$?
-
-        debug "Network Registeration Status:"
-        # For super SIM
-        atcom AT+CREG? OK ERROR 10 | grep "CREG: 0,5"
-        NETWORK_REG=$?
-        # For native SIM
-        atcom AT+CREG? OK ERROR 10 | grep "CREG: 0,1"
-        NETWORK_REG_2=$?
-        # Combined network registeration status
-        NETWORK_REG=$((NETWORK_REG+NETWORK_REG_2))
-
-        if [[ $SIM_READY -eq 0 ]] && [[ $NETWORK_REG -le 1 ]]; then
-            debug "Network is ready."
-            NETWORK_OK=1
-            return 0
-            break
-        else
-            printf "?"
-        fi
-        sleep 2
-    done
-    return 1
-}
-
 # Control pins
 gpio -g mode $POWER_OFF out	#HAT_POWER_OFF
 gpio -g mode $W_DISABLE out	#W_DISABLE
@@ -56,6 +14,7 @@ gpio -g mode $W_DISABLE out	#W_DISABLE
 gpio -g write $POWER_OFF 0
 gpio -g write $W_DISABLE 0
 
+
 if check_network -eq 0; then 
     debug "PPP chatscript is starting...";
     sudo pon;
diff --git a/ppp_installer/reconnect_cellulariot b/ppp_installer/reconnect_cellulariot
index 53066af..5c0967a 100644
--- a/ppp_installer/reconnect_cellulariot
+++ b/ppp_installer/reconnect_cellulariot
@@ -1,59 +1,18 @@
 #!/bin/env bash
 
+source functions.sh
+source configs.sh
+
 # Pinout for cellulariot hat
 STATUS=23
 POWERKEY=24
 ENABLE=17
 
-# General variables
-INTERVAL=60
-DOUBLE_CHECK_WAIT=10
-PING_TIMEOUT=9
-
 # Configure pins
 gpio -g mode $STATUS in
 gpio -g mode $POWERKEY out
 gpio -g mode $ENABLE out
 
-function debug()
-{
-    echo $(date "+%Y/%m/%d - %H:%M:%S :") "$1"
-}
-
-function check_network()
-{
-    # Check the network is ready
-    debug "Checking the network is ready..."
-
-    for i in {1..600}; do
-        NETWORK_OK=0
-
-        debug "SIM Status:"
-        atcom AT+CPIN? OK ERROR 10 | grep "CPIN: READY"
-        SIM_READY=$?
-
-        debug "Network Registeration Status:"
-        # For super SIM
-        atcom AT+CREG? OK ERROR 10 | grep "CREG: 0,5"
-        NETWORK_REG=$?
-        # For native SIM
-        atcom AT+CREG? OK ERROR 10 | grep "CREG: 0,1"
-        NETWORK_REG_2=$?
-        # Combined network registeration status
-        NETWORK_REG=$((NETWORK_REG+NETWORK_REG_2))
-
-        if [[ $SIM_READY -eq 0 ]] && [[ $NETWORK_REG -le 1 ]]; then
-            debug "Network is ready."
-            NETWORK_OK=1
-            return 0
-            break
-        else
-            printf "?"
-        fi
-        sleep 2
-    done
-    return 1
-}
 
 function power_up_module()
 {
diff --git a/ppp_installer/reconnect_cellulariot_app b/ppp_installer/reconnect_cellulariot_app
index 945e2fa..41c2e4e 100644
--- a/ppp_installer/reconnect_cellulariot_app
+++ b/ppp_installer/reconnect_cellulariot_app
@@ -1,59 +1,18 @@
 #!/bin/env bash
 
+source functions.sh
+source configs.sh
+
 # Pinout for cellulariot app shield
 STATUS=20
 POWERKEY=11
 DISABLE=26
 
-# General variables
-INTERVAL=60
-DOUBLE_CHECK_WAIT=10
-PING_TIMEOUT=9
-
 # Configure pins
 gpio -g mode $STATUS in
 gpio -g mode $POWERKEY out
 gpio -g mode $DISABLE out
 
-function debug()
-{
-    echo $(date "+%Y/%m/%d - %H:%M:%S :") "$1"
-}
-
-function check_network()
-{
-    # Check the network is ready
-    debug "Checking the network is ready..."
-
-    for i in {1..600}; do
-        NETWORK_OK=0
-
-        debug "SIM Status:"
-        atcom AT+CPIN? OK ERROR 10 | grep "CPIN: READY"
-        SIM_READY=$?
-
-        debug "Network Registeration Status:"
-        # For super SIM
-        atcom AT+CREG? OK ERROR 10 | grep "CREG: 0,5"
-        NETWORK_REG=$?
-        # For native SIM
-        atcom AT+CREG? OK ERROR 10 | grep "CREG: 0,1"
-        NETWORK_REG_2=$?
-        # Combined network registeration status
-        NETWORK_REG=$((NETWORK_REG+NETWORK_REG_2))
-
-        if [[ $SIM_READY -eq 0 ]] && [[ $NETWORK_REG -le 1 ]]; then
-            debug "Network is ready."
-            NETWORK_OK=1
-            return 0
-            break
-        else
-            printf "?"
-        fi
-        sleep 2
-    done
-    return 1
-}
 
 function power_up_module()
 {
diff --git a/ppp_installer/reconnect_gprsshield b/ppp_installer/reconnect_gprsshield
index 644e59b..11698c8 100644
--- a/ppp_installer/reconnect_gprsshield
+++ b/ppp_installer/reconnect_gprsshield
@@ -1,58 +1,18 @@
 #!/bin/env bash
 
+source functions.sh
+source configs.sh
+
 # Pinout for cellulariot hat
 STATUS=19
 POWERKEY=26
 
-# General variables
-INTERVAL=60
-DOUBLE_CHECK_WAIT=10
-PING_TIMEOUT=9
 
 # Configure pins
 gpio -g mode $STATUS in
 gpio -g mode $POWERKEY out
 gpio -g mode $ENABLE out
 
-function debug()
-{
-    echo $(date "+%Y/%m/%d - %H:%M:%S :") "$1"
-}
-
-function check_network()
-{
-    # Check the network is ready
-    debug "Checking the network is ready..."
-
-    for i in {1..600}; do
-        NETWORK_OK=0
-
-        debug "SIM Status:"
-        atcom AT+CPIN? OK ERROR 10 | grep "CPIN: READY"
-        SIM_READY=$?
-
-        debug "Network Registeration Status:"
-        # For super SIM
-        atcom AT+CREG? OK ERROR 10 | grep "CREG: 0,5"
-        NETWORK_REG=$?
-        # For native SIM
-        atcom AT+CREG? OK ERROR 10 | grep "CREG: 0,1"
-        NETWORK_REG_2=$?
-        # Combined network registeration status
-        NETWORK_REG=$((NETWORK_REG+NETWORK_REG_2))
-
-        if [[ $SIM_READY -eq 0 ]] && [[ $NETWORK_REG -le 1 ]]; then
-            debug "Network is ready."
-            NETWORK_OK=1
-            return 0
-            break
-        else
-            printf "?"
-        fi
-        sleep 2
-    done
-    return 1
-}
 
 function power_up_module()
 {
diff --git a/ppp_installer/reconnect_test.sh b/ppp_installer/reconnect_test.sh
index b35d7b1..0f5d620 100644
--- a/ppp_installer/reconnect_test.sh
+++ b/ppp_installer/reconnect_test.sh
@@ -1,48 +1,8 @@
 #!/bin/env bash
 
-INTERVAL=60
-DOUBLE_CHECK_WAIT=10
-PING_TIMEOUT=9
+source functions.sh
+source configs.sh
 
-function debug()
-{
-    echo $(date "+%Y/%m/%d - %H:%M:%S :") "$1"
-}
-
-function check_network()
-{
-    # Check the network is ready
-    debug "Checking the network is ready..."
-
-    for i in {1..600}; do
-        NETWORK_OK=0
-
-        debug "SIM Status:"
-        atcom AT+CPIN? OK ERROR 10 | grep "CPIN: READY"
-        SIM_READY=$?
-
-        debug "Network Registeration Status:"
-        # For super SIM
-        atcom AT+CREG? OK ERROR 10 | grep "CREG: 0,5"
-        NETWORK_REG=$?
-        # For native SIM
-        atcom AT+CREG? OK ERROR 10 | grep "CREG: 0,1"
-        NETWORK_REG_2=$?
-        # Combined network registeration status
-        NETWORK_REG=$((NETWORK_REG+NETWORK_REG_2))
-
-        if [[ $SIM_READY -eq 0 ]] && [[ $NETWORK_REG -le 1 ]]; then
-            debug "Network is ready."
-            NETWORK_OK=1
-            return 0
-            break
-        else
-            printf "?"
-        fi
-        sleep 2
-    done
-    return 1
-}
 
 if check_network -eq 0; then 
     debug "PPP chatscript is starting...";
diff --git a/ppp_installer/reconnect_tracker b/ppp_installer/reconnect_tracker
index 05e5f3d..a8c0c04 100644
--- a/ppp_installer/reconnect_tracker
+++ b/ppp_installer/reconnect_tracker
@@ -1,59 +1,18 @@
 #!/bin/env bash
 
+source functions.sh
+source configs.sh
+
 # Pinout for cellulariot app shield
 STATUS=23
 POWERKEY=24
 DISABLE=17
 
-# General variables
-INTERVAL=60
-DOUBLE_CHECK_WAIT=10
-PING_TIMEOUT=9
-
 # Configure pins
 gpio -g mode $STATUS in
 gpio -g mode $POWERKEY out
 gpio -g mode $DISABLE out
 
-function debug()
-{
-    echo $(date "+%Y/%m/%d - %H:%M:%S :") "$1"
-}
-
-function check_network()
-{
-    # Check the network is ready
-    debug "Checking the network is ready..."
-
-    for i in {1..600}; do
-        NETWORK_OK=0
-
-        debug "SIM Status:"
-        atcom AT+CPIN? OK ERROR 10 | grep "CPIN: READY"
-        SIM_READY=$?
-
-        debug "Network Registeration Status:"
-        # For super SIM
-        atcom AT+CREG? OK ERROR 10 | grep "CREG: 0,5"
-        NETWORK_REG=$?
-        # For native SIM
-        atcom AT+CREG? OK ERROR 10 | grep "CREG: 0,1"
-        NETWORK_REG_2=$?
-        # Combined network registeration status
-        NETWORK_REG=$((NETWORK_REG+NETWORK_REG_2))
-
-        if [[ $SIM_READY -eq 0 ]] && [[ $NETWORK_REG -le 1 ]]; then
-            debug "Network is ready."
-            NETWORK_OK=1
-            return 0
-            break
-        else
-            printf "?"
-        fi
-        sleep 2
-    done
-    return 1
-}
 
 function power_up_module()
 {