From 51908bc379ff3fe3b5595ebf4c6ad30136c28b07 Mon Sep 17 00:00:00 2001 From: Yasin Kaya Date: Fri, 27 Nov 2020 10:02:36 +0000 Subject: [PATCH] Arranged install.sh files --- ppp_install.sh | 303 ++++++++++++++++++ ...all_ppp_jetson.sh => ppp_install_jetson.sh | 0 install.sh => ppp_install_standalone.sh | 0 3 files changed, 303 insertions(+) create mode 100755 ppp_install.sh rename install_ppp_jetson.sh => ppp_install_jetson.sh (100%) rename install.sh => ppp_install_standalone.sh (100%) diff --git a/ppp_install.sh b/ppp_install.sh new file mode 100755 index 0000000..dc57091 --- /dev/null +++ b/ppp_install.sh @@ -0,0 +1,303 @@ +#!/bin/bash + +SIXFAB_PATH="/opt/sixfab" +PPP_PATH="/opt/sixfab/ppp_connection_manager" + +REPO_PATH="https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer" +BRANCH=revision +SOURCE_PATH="./src" +SCRIPT_PATH="./src/reconnect_scripts" +RECONNECT_SCRIPT_NAME="ppp_reconnect.sh" +MANAGER_SCRIPT_NAME="ppp_connection_manager.sh" +SERVICE_NAME="ppp_connection_manager.service" + +YELLOW='\033[1;33m' +RED='\033[0;31m' +BLUE='\033[1;34m' +GREEN='\033[0;32m' +SET='\033[0m' + +# Global Varibales +POWERUP_REQ=1 +POWERUP_NOT_REQ=0 + +STATUS_GPRS=19 +STATUS_CELL_IOT_APP=20 +STATUS_CELL_IOT=23 +STATUS_TRACKER=23 + +POWERKEY_GPRS=26 +POWERKEY_CELL_IOT_APP=11 +POWERKEY_CELL_IOT=24 +POWERKEY_TRACKER=24 + + +function colored_echo +{ + COLOR=${2:-$YELLOW} + echo -e "$COLOR $1 ${SET}" +} + + +# Check Sixfab path +if [[ -e $SIXFAB_PATH ]]; then + colored_echo "Sixfab path already exist!" ${SET} +else + sudo mkdir $SIXFAB_PATH + colored_echo "Sixfab path is created." ${SET} +fi + +# Check PPP path +if [[ -e $PPP_PATH ]]; then + colored_echo "PPP path already exist!" ${SET} +else + sudo mkdir $PPP_PATH + colored_echo "PPP path is created." ${SET} +fi + + +colored_echo "Please choose your Sixfab Shield/HAT:" +colored_echo "1: GSM/GPRS Shield" +colored_echo "2: 3G, 4G/LTE Base Shield" +colored_echo "3: Cellular IoT App Shield" +colored_echo "4: Cellular IoT HAT" +colored_echo "5: Tracker HAT" +colored_echo "6: 3G/4G Base HAT" + + +read shield_hat +case $shield_hat in + 1) colored_echo "You chose GSM/GPRS Shield" ${GREEN};; + 2) colored_echo "You chose Base Shield" ${GREEN};; + 3) colored_echo "You chose CellularIoT Shield" ${GREEN};; + 4) colored_echo "You chose CellularIoT HAT" ${GREEN};; + 5) colored_echo "You chose Tracker HAT" ${GREEN};; + 6) colored_echo "You chose 3G/4G Base HAT" ${GREEN};; + *) colored_echo "Wrong Selection, exiting" ${RED}; exit 1; +esac + +colored_echo "Checking requirements..." + +colored_echo "Updating headers..." +sudo apt-get update + +colored_echo "Installing python3 if it is required..." +if ! [ -x "$(command -v python3)" ]; then + sudo apt-get install python3 -y + if [[ $? -ne 0 ]]; then colored_echo "Process failed" ${RED}; exit 1; fi +fi + +colored_echo "Installing pip3 if it is required..." +if ! [ -x "$(command -v pip3)" ]; then + sudo apt-get install python3-pip -y + if [[ $? -ne 0 ]]; then colored_echo "Process failed" ${RED}; exit 1; fi +fi + +colored_echo "Installing or upgrading atcom if it is required..." + +pip3 install -U atcom +if [[ $? -ne 0 ]]; then colored_echo "Process failed" ${RED}; exit 1; fi + +source ~/.profile +if [[ $? -ne 0 ]]; then colored_echo "Process failed" ${RED}; exit 1; fi + + +colored_echo "Copying setup files..." + +cp $SOURCE_PATH/chat-connect -O chat-connect +cp $SOURCE_PATH/chat-disconnect -O chat-disconnect +cp $SOURCE_PATH/provider -O provider + +colored_echo "ppp and wiringpi (gpio tool) installing..." +apt-get install ppp wiringpi -y +if [[ $? -ne 0 ]]; then colored_echo "Process failed" ${RED}; exit 1; fi + +# test wiringpi and fix if there is any issue +gpio readall | grep Oops > /dev/null +if [[ $? -ne 1 ]]; then + colored_echo "Known wiringpi issue is detected! Wiringpi is updating..." + wget https://project-downloads.drogon.net/wiringpi-latest.deb + sudo dpkg -i wiringpi-latest.deb +fi + +colored_echo "What is your carrier APN?" +read carrierapn + +colored_echo "Your Input is : $carrierapn" ${GREEN} + +while [ 1 ] +do + colored_echo "Does your carrier need username and password? [Y/n]" + read usernpass + + colored_echo "You chose $usernpass" ${GREEN} + + case $usernpass in + [Yy]* ) + + while [ 1 ] + do + + colored_echo "Enter username" + read username + + colored_echo "Your Input is : $username" ${GREEN} + + colored_echo "Enter password" + read password + + colored_echo "Your Input is : $password" ${GREEN} + + sed -i "s/noauth/#noauth\nuser \"$username\"\npassword \"$password\"/" provider + break + done + + break;; + + [Nn]* ) break;; + *) colored_echo "Wrong Selection, Select among Y or n" ${RED};; + esac +done + +colored_echo "What is your device communication PORT? (ttyS0/ttyUSB3/etc.)" +read devicename + +colored_echo "Your input is: $devicename" ${GREEN} + +if grep -q "ttyS0" <<<"$devicename"; then + colored_echo "*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-" ${BLUE} + colored_echo "REMINDER!" ${BLUE} + colored_echo "- Disable serial console and enable miniuart to use ttyS0 as the serial interface." ${SET} + colored_echo "✔ If your ttyS0 (miniuart) port is enabled, press ENTER and continue to installation." ${SET} + colored_echo "✘ If not, please follow the instructions to enable ttyS0 interface on Raspberry Pi" ${SET} + echo -e " + 1. Start raspi-config: ${BLUE}sudo raspi-config${SET}. + 2. Select option 3 - ${BLUE}Interface Options${SET}. + 3. Select option P6 - ${BLUE}Serial Port${SET}. + 4. ${BLUE}At the prompt Would you like a login shell to be accessible over serial?${SET} answer ${BLUE}'No'${SET} + 5. ${BLUE}At the prompt Would you like the serial port hardware to be enabled?${SET} answer ${BLUE}'Yes'${SET} + 6. Exit raspi-config and ${BLUE}reboot${SET} the Pi for changes to take effect. + " + colored_echo "*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-" ${BLUE} + echo + echo -e "Press ${BLUE}ENTER${SET} key to continue to installation or press ${BLUE}CTRL^C${SET} to abort installation and enable ttyS0 serial interface." + read -p "" ENTER + + colored_echo "Doing atcom configuration for ttyS0 serial..." + # create atcom config + echo port: "/dev/ttyS0" > configs.yml + mv configs.yml $PPP_PATH +else + # delete atcom config + ls $PPP_PATH | grep configs.yml > /dev/null + if [[ $? -eq 0 ]]; then rm $PPP_PATH/configs.yml; fi +fi + +mkdir -p /etc/chatscripts + +mv chat-connect /etc/chatscripts/ +mv chat-disconnect /etc/chatscripts/ + +mkdir -p /etc/ppp/peers +sed -i "s/#APN/$carrierapn/" provider +sed -i "s/#DEVICE/$devicename/" provider +mv provider /etc/ppp/peers/provider + +if ! (grep -q 'sudo route' /etc/ppp/ip-up ); then + echo "sudo route add default ppp0" >> /etc/ppp/ip-up +fi + +if [[ $shield_hat -eq 2 ]] || [[ $shield_hat -eq 6 ]]; then + if ! (grep -q 'max_usb_current' /boot/config.txt ); then + echo "max_usb_current=1" >> /boot/config.txt + fi +fi + +while [ 1 ] +do + colored_echo "Do you want to activate auto connect/reconnect service at R.Pi boot up? [Y/n]" + read auto_reconnect + + colored_echo "You chose $auto_reconnect" ${GREEN} + + case $auto_reconnect in + [Yy]* ) colored_echo "Copying setup file..." + + cp $SOURCE_PATH/$SERVICE_NAME + cp $SOURCE_PATH/functions.sh + cp $SOURCE_PATH/configs.sh + cp $SOURCE_PATH/configure_modem.sh + cp $SOURCE_PATH/$MANAGER_SCRIPT_NAME + + # APN Configuration + sed -i "s/SIM_APN/$carrierapn/" configure_modem.sh + + if [ $shield_hat -eq 1 ]; then + + cp $SCRIPT_PATH/reconnect_gprsshield -O $RECONNECT_SCRIPT_NAME + + sed -i "s/STATUS_PIN/$STATUS_GPRS/" configure_modem.sh + sed -i "s/POWERKEY_PIN/$POWERKEY_GPRS/" configure_modem.sh + sed -i "s/POWERUP_FLAG/$POWERUP_REQ/" configure_modem.sh + + + elif [ $shield_hat -eq 2 ]; then + + cp $SCRIPT_PATH/reconnect_baseshield -O $RECONNECT_SCRIPT_NAME + + sed -i "s/POWERUP_FLAG/$POWERUP_NOT_REQ/" configure_modem.sh + + elif [ $shield_hat -eq 3 ]; then + + cp $SCRIPT_PATH/reconnect_cellulariot_app -O $RECONNECT_SCRIPT_NAME + + sed -i "s/STATUS_PIN/$STATUS_CELL_IOT_APP/" configure_modem.sh + sed -i "s/POWERKEY_PIN/$POWERKEY_CELL_IOT_APP/" configure_modem.sh + sed -i "s/POWERUP_FLAG/$POWERUP_REQ/" configure_modem.sh + + elif [ $shield_hat -eq 4 ]; then + + cp $SCRIPT_PATH/reconnect_cellulariot -O $RECONNECT_SCRIPT_NAME + + sed -i "s/STATUS_PIN/$STATUS_CELL_IOT/" configure_modem.sh + sed -i "s/POWERKEY_PIN/$POWERKEY_CELL_IOT/" configure_modem.sh + sed -i "s/POWERUP_FLAG/$POWERUP_REQ/" configure_modem.sh + + elif [ $shield_hat -eq 5 ]; then + + cp $SCRIPT_PATH/reconnect_tracker -O $RECONNECT_SCRIPT_NAME + + sed -i "s/STATUS_PIN/$STATUS_TRACKER/" configure_modem.sh + sed -i "s/POWERKEY_PIN/$POWERKEY_TRACKER/" configure_modem.sh + sed -i "s/POWERUP_FLAG/$POWERUP_REQ/" configure_modem.sh + + elif [ $shield_hat -eq 6 ]; then + + cp $SCRIPT_PATH/reconnect_basehat -O $RECONNECT_SCRIPT_NAME + + sed -i "s/POWERUP_FLAG/$POWERUP_NOT_REQ/" configure_modem.sh + + fi + + mv functions.sh $PPP_PATH + mv configs.sh $PPP_PATH + mv configure_modem.sh $PPP_PATH + mv $RECONNECT_SCRIPT_NAME $PPP_PATH + mv $MANAGER_SCRIPT_NAME $PPP_PATH + mv $SERVICE_NAME /etc/systemd/system/ + + systemctl daemon-reload + systemctl enable $SERVICE_NAME + + break;; + + [Nn]* ) echo -e "${YELLOW}To connect to internet run ${BLUE}\"sudo pon\"${YELLOW} and to disconnect run ${BLUE}\"sudo poff\" ${SET}" + break;; + *) colored_echo "Wrong Selection, Select among Y or n" ${RED};; + esac +done + +read -p "Press ENTER key to reboot" ENTER + +colored_echo "Rebooting..." ${GREEN} +reboot diff --git a/install_ppp_jetson.sh b/ppp_install_jetson.sh similarity index 100% rename from install_ppp_jetson.sh rename to ppp_install_jetson.sh diff --git a/install.sh b/ppp_install_standalone.sh similarity index 100% rename from install.sh rename to ppp_install_standalone.sh