From 3c1ad39a18f051a217e1ac474cc88237ff277a85 Mon Sep 17 00:00:00 2001
From: saeedjohar <saeed_johar@yahoo.com>
Date: Tue, 31 Mar 2020 17:21:16 +0300
Subject: [PATCH] unneccesary lines removed

---
 ppp_installer/install_ppp_jetson.sh | 66 +----------------------------
 1 file changed, 1 insertion(+), 65 deletions(-)

diff --git a/ppp_installer/install_ppp_jetson.sh b/ppp_installer/install_ppp_jetson.sh
index 24d55b2..d85aecd 100755
--- a/ppp_installer/install_ppp_jetson.sh
+++ b/ppp_installer/install_ppp_jetson.sh
@@ -26,24 +26,6 @@ case $shield_hat in
     *)    echo "${RED}Wrong Selection, exiting${SET}"; exit 1;
 esac
 
-if [ $shield_hat -eq 3 ] || [ $shield_hat -eq 4 ];	then
-	echo "${YELLOW}Please choose LTE Technology:${SET}"
-	echo "${YELLOW}1: GPRS/EDGE${SET}"
-	echo "${YELLOW}2: CATM1${SET}"
-	echo "${YELLOW}3: NB-IoT${SET}"
-
-	read network_technology
-	case $network_technology in
-		1)    echo "${YELLOW}You chose GPRS/EDGE${SET}"
-				EXTRA='OK AT+QCFG="band",F,400A0E189F,A0E189F,1\nOK AT+QCFG="nwscanseq",01,1\nOK AT+QCFG="nwscanmode",1,1\nOK AT+QCFG="iotopmode",2,1';;
-		2)    echo "${YELLOW}You chose CATM1${SET}"
-				EXTRA='OK AT+QCFG="band",F,400A0E189F,A0E189F,1\nOK AT+QCFG="nwscanseq",02,1\nOK AT+QCFG="nwscanmode",3,1\nOK AT+QCFG="iotopmode",0,1';;
-		3)    echo "${YELLOW}You chose NB-IoT${SET}"
-				EXTRA='OK AT+QCFG="band",F,400A0E189F,A0E189F,1\nOK AT+QCFG="nwscanseq",03,1\nOK AT+QCFG="nwscanmode",3,1\nOK AT+QCFG="iotopmode",1,1';;
-		*) 	  echo "{RED}Wrong Selection, exiting${SET}"; exit 1;
-	esac
-fi
-
 echo "${YELLOW}Downloading setup files${SET}"
 wget --no-check-certificate  https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/chat-connect -O chat-connect
 
@@ -101,11 +83,7 @@ echo "${YELLOW}What is your device communication PORT? (ttyS0/ttyUSB3/etc.)${SET
 read devicename 
 
 mkdir -p /etc/chatscripts
-if [ $shield_hat -eq 3 ] || [ $shield_hat -eq 4 ]; then
-  sed -i "s/#EXTRA/$EXTRA/" chat-connect
-else
-  sed -i "/#EXTRA/d" chat-connect
-fi
+sed -i "/#EXTRA/d" chat-connect
 
 mv chat-connect /etc/chatscripts/
 mv chat-disconnect /etc/chatscripts/
@@ -120,47 +98,5 @@ if ! (grep -q 'sudo route' /etc/ppp/ip-up ); then
     echo "sudo route add default ppp0" >> /etc/ppp/ip-up
 fi
 
-while [ 1 ]
-do
-	echo "${YELLOW}Do you want to activate auto connect/reconnect service at R.Pi boot up? [Y/n] ${SET}"
-	read auto_reconnect
-
-	case $auto_reconnect in
-		[Yy]* )    echo "${YELLOW}Downloading setup file${SET}"
-			  
-			  wget --no-check-certificate https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/reconnect_service -O reconnect.service
-			  
-			  if [ $shield_hat -eq 1 ]; then
-			  
-				wget --no-check-certificate  https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/reconnect_gprsshield -O reconnect.sh
-			  
-			  elif [ $shield_hat -eq 2 ]; then 
-			  
-				wget --no-check-certificate  https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/reconnect_baseshield -O reconnect.sh
-				
-			  elif [ $shield_hat -eq 3 ]; then 
-			  
-				wget --no-check-certificate  https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/reconnect_cellulariot_app -O reconnect.sh
-			  
-			  elif [ $shield_hat -eq 4 ]; then 
-			  
-				wget --no-check-certificate  https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/reconnect_cellulariot -O reconnect.sh
-			  fi
-			  
-			  mv reconnect.sh /usr/src/
-			  mv reconnect.service /etc/systemd/system/
-			  
-			  
-			  systemctl daemon-reload
-			  systemctl enable reconnect.service
-			  
-			  break;;
-			  
-		[Nn]* )    echo "${YELLOW}To connect to internet run ${BLUE}\"sudo pon\"${YELLOW} and to disconnect run ${BLUE}\"sudo poff\" ${SET}"
-			  break;;
-		*)   echo "${RED}Wrong Selection, Select among Y or n${SET}";;
-	esac
-done
-
 read -p "Press ENTER key to reboot" ENTER
 reboot
\ No newline at end of file