Sixfab_PPP_Installer/ppp_installer/install_ppp_jetson.sh

162 lines
5.2 KiB
Bash
Raw Normal View History

2019-07-12 14:38:39 +00:00
#!/bin/sh
2019-07-12 14:40:35 +00:00
:'
Created on July 12, 2019 by Saeed Johar (saeedjohar)
'
2019-07-12 14:38:39 +00:00
YELLOW='\033[1;33m'
RED='\033[0;31m'
BLUE='\033[1;34m'
SET='\033[0m'
echo "${YELLOW}Please choose your Sixfab Shield/HAT:${SET}"
echo "${YELLOW}1: GSM/GPRS Shield${SET}"
echo "${YELLOW}2: 3G, 4G/LTE Base Shield${SET}"
echo "${YELLOW}3: Cellular IoT App Shield${SET}"
echo "${YELLOW}4: Cellular IoT HAT${SET}"
read shield_hat
case $shield_hat in
1) echo "${YELLOW}You chose GSM/GPRS Shield${SET}";;
2) echo "${YELLOW}You chose Base Shield${SET}";;
3) echo "${YELLOW}You chose CellularIoT Shield${SET}";;
4) echo "${YELLOW}You chose CellularIoT HAT${SET}";;
*) echo "${RED}Wrong Selection, exiting${SET}"; exit 1;
esac
if [ $shield_hat -eq 3 ] || [ $shield_hat -eq 4 ]; then
echo "${YELLOW}Please choose LTE Technology:${SET}"
echo "${YELLOW}1: GPRS/EDGE${SET}"
echo "${YELLOW}2: CATM1${SET}"
echo "${YELLOW}3: NB-IoT${SET}"
read network_technology
case $network_technology in
1) echo "${YELLOW}You chose GPRS/EDGE${SET}"
EXTRA='OK AT+QCFG="band",F,400A0E189F,A0E189F,1\nOK AT+QCFG="nwscanseq",01,1\nOK AT+QCFG="nwscanmode",1,1\nOK AT+QCFG="iotopmode",2,1';;
2) echo "${YELLOW}You chose CATM1${SET}"
EXTRA='OK AT+QCFG="band",F,400A0E189F,A0E189F,1\nOK AT+QCFG="nwscanseq",02,1\nOK AT+QCFG="nwscanmode",3,1\nOK AT+QCFG="iotopmode",0,1';;
3) echo "${YELLOW}You chose NB-IoT${SET}"
EXTRA='OK AT+QCFG="band",F,400A0E189F,A0E189F,1\nOK AT+QCFG="nwscanseq",03,1\nOK AT+QCFG="nwscanmode",3,1\nOK AT+QCFG="iotopmode",1,1';;
*) echo "{RED}Wrong Selection, exiting${SET}"; exit 1;
esac
fi
echo "${YELLOW}Downloading setup files${SET}"
wget --no-check-certificate https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/chat-connect -O chat-connect
if [ $? -ne 0 ]; then
echo "${RED}Download failed${SET}"
exit 1;
fi
wget --no-check-certificate https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/chat-disconnect -O chat-disconnect
if [ $? -ne 0 ]; then
echo "${RED}Download failed${SET}"
exit 1;
fi
wget --no-check-certificate https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/provider -O provider
if [ $? -ne 0 ]; then
echo "${RED}Download failed${SET}"
exit 1;
fi
echo "${YELLOW}ppp install${SET}"
apt-get install ppp
echo "${YELLOW}What is your carrier APN?${SET}"
read carrierapn
while [ 1 ]
do
echo "${YELLOW}Does your carrier need username and password? [Y/n]${SET}"
read usernpass
case $usernpass in
[Yy]* ) while [ 1 ]
do
echo "${YELLOW}Enter username${SET}"
read username
echo "${YELLOW}Enter password${SET}"
read password
sed -i "s/noauth/#noauth\nuser \"$username\"\npassword \"$password\"/" provider
break
done
break;;
[Nn]* ) break;;
*) echo "${RED}Wrong Selection, Select among Y or n${SET}";;
esac
done
echo "${YELLOW}What is your device communication PORT? (ttyS0/ttyUSB3/etc.)${SET}"
read devicename
mkdir -p /etc/chatscripts
if [ $shield_hat -eq 3 ] || [ $shield_hat -eq 4 ]; then
sed -i "s/#EXTRA/$EXTRA/" chat-connect
else
sed -i "/#EXTRA/d" chat-connect
fi
mv chat-connect /etc/chatscripts/
mv chat-disconnect /etc/chatscripts/
mkdir -p /etc/ppp/peers
sed -i "s/#APN/$carrierapn/" provider
sed -i "s/#DEVICE/$devicename/" provider
mv provider /etc/ppp/peers/provider
if ! (grep -q 'route' /etc/ppp/ip-up ); then
echo "sudo route del default" >> /etc/ppp/ip-up
echo "sudo route add default ppp0" >> /etc/ppp/ip-up
fi
while [ 1 ]
do
echo "${YELLOW}Do you want to activate auto connect/reconnect service at R.Pi boot up? [Y/n] ${SET}"
read auto_reconnect
case $auto_reconnect in
[Yy]* ) echo "${YELLOW}Downloading setup file${SET}"
wget --no-check-certificate https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/reconnect_service -O reconnect.service
if [ $shield_hat -eq 1 ]; then
wget --no-check-certificate https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/reconnect_gprsshield -O reconnect.sh
elif [ $shield_hat -eq 2 ]; then
wget --no-check-certificate https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/reconnect_baseshield -O reconnect.sh
elif [ $shield_hat -eq 3 ]; then
wget --no-check-certificate https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/reconnect_cellulariot_app -O reconnect.sh
elif [ $shield_hat -eq 4 ]; then
wget --no-check-certificate https://raw.githubusercontent.com/sixfab/Sixfab_PPP_Installer/master/ppp_installer/reconnect_cellulariot -O reconnect.sh
fi
mv reconnect.sh /usr/src/
mv reconnect.service /etc/systemd/system/
systemctl daemon-reload
systemctl enable reconnect.service
break;;
[Nn]* ) echo "${YELLOW}To connect to internet run ${BLUE}\"sudo pon\"${YELLOW} and to disconnect run ${BLUE}\"sudo poff\" ${SET}"
break;;
*) echo "${RED}Wrong Selection, Select among Y or n${SET}";;
esac
done
read -p "Press ENTER key to reboot" ENTER
reboot